Abstract
Due to the lack of information about the casting and mechanical properties of the AK8l alloy during casting into printed molds made of the ZCast mixture, studies on determining its fluidity, shrinkage, and mechanical properties, as well as on increasing the relative elongation of this alloy by means of optimizing its chemical composition, have been performed. It is shown that the method of casting into a printed mold made of the ZCast mixture can be effectively used in obtaining castings for critical applications from the AK8l alloy, especially at the stage of preparing cast products for production.
Similar content being viewed by others
References
Metod lit’ya metallov po tekhnologii ZCast (Casting Method of Metals According to the ZCast Technology), Moscow: Z. Corporation, 2007.
Z Corporation (Samyi bystryi put’ sozdavat’ fizicheskie tsvetnye modeli is trekhmernykh dannykh) The Quickest Way to Create Physical Color Models Using the Three-Dimensional Data))//http://www.zcorp.com/
GOST (State Standard) 16438-70: Sand and Metallic Molds for Obtaining the Samples of Fluidity of Metals, Moscow: Izd. standartov, 1999.
Zolotorevskii, V.S., Mekhanicheskie svoistva metallov (Mechanical Properties of Metals), Moscow: MISiS, 1998.
GOST 1497-84: Metals. Methods for Testing the Tensile, Moscow: Standartinform, 2005.
Belov, N.A., Savchenko, S.V., and Khvan, A.V., Fazovyi sostav i struktura siluminov: Spravochnoe izdanie (Phase Composition and Structure of Silumins: Reference Book), Moscow: MISiS, 2008.
Belov, N.A., Savchenko, S.V., and Belov, V.D., Atlas mikrostruktur promyshlennykh siluminov: Spravochnik (Atlas of Microstructures of Industrial Silumins: Handbook), Moscow: MISiS, 2009.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Drokina, V.D. Belov, 2012, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2012, No. 4, pp. 40–43.
About this article
Cite this article
Drokina, V.V., Belov, V.D. Study of casting and mechanical properties of the AK8L alloy in castings fabricated using printed molds made of the ZCAST mixture. Russ. J. Non-ferrous Metals 54, 48–50 (2013). https://doi.org/10.3103/S1067821213010045
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821213010045