Abstract
Processes of melting the samples of industrial AK6 aluminum alloy in cast and homogenized states are studied using thermal analysis with the subsequent numerical differentiation with respect to time of heating curves in a temperature range from 300 to 670°C. The temperatures of nonequilibrium solidus, equilibrium solidus, and liquidus are evaluated. The microstructure of cast and homogenized alloy samples is studied and the local chemical composition of the aluminum host and phases is determined.
Similar content being viewed by others
References
Struktura i svoistva polufabrikatov iz alyuminievykh splavov: Spravochnik (The Structure and Properties of Half-Finished Products from Aluminum Alloys: Reference Book), Archakov, Z.N., Balakhontsev, G.A., and Basov, I.G., Eds., Moscow: Metallurgiya, 1984, 2nd ed.
Dobatkin, V.I., Nepreryvnoe lit’e i liteinye svoistva splavov (Continuous Casting and Casting Properties of Alloys), Moscow: Oborongiz, 1948.
Zolotorevskii, V.S., Struktura i prochnost’ litykh alyuminievykh splavov (The Structure and Strength of Cast Aluminum Alloys), Moscow: Metallurgiya, 1981.
Egunov, V.P., Vvedenie v termicheskii analiz (Introduction to Thermal Analysis), Samara: SamVen, 1996.
Smirnov, V.L., Zamyatin, V.M., Ovsyannikov, B.V., and Mushnikov, V.S., Tsvetn. Met., 2009, no. 2, p. 80.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © P.L. Reznik, V.M. Zamyatin, V.S. Mushnikov, 2012, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2012, No. 4, pp. 54–58.
About this article
Cite this article
Reznik, P.L., Zamyatin, V.M. & Mushnikov, V.S. Thermal analysis and electron probe microanalysis of the AK6 aluminum alloy. Russ. J. Non-ferrous Metals 54, 62–65 (2013). https://doi.org/10.3103/S1067821213010173
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821213010173