Abstract
Different methods for correcting the matrix of geometrical angular radiation coefficients deter-mined using approximate methods and therefore not satisfying the properties of closability and reciprocity are considered. It is revealed that, for a matrix with a large number of zero elements, neither the method of fixed consecutive correction nor the method based on using undetermined Lagrangian multipliers make it possible to obtain a physically plausible matrix with ideal abovementioned properties. The method of selective correction proposed in this study did not yield an acceptable result either. An acceptable error was obtained only with the help of a two-staged procedure, namely selective correction using the Lagrangian multiplier with the subsequent fixed correction of the matrix.
Similar content being viewed by others
References
Krupennikov, S.A., Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1991, no. 7, p. 110.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.A. Levitskii, N.V. Tikhomirova, 2012, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2012, No. 3, pp. 61–64.
About this article
Cite this article
Levitskii, I.A., Tikhomirova, N.V. Comparison of different methods to correct the matrix of geometrical angular radiation coefficients. Russ. J. Non-ferrous Metals 54, 66–69 (2013). https://doi.org/10.3103/S1067821213010136
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821213010136