1. Covid-19 Pandemic: Need to Exercise Caution While Using Hypochlorite Sanitizer in Manufacturing Industries

   • S. K. Bhaumik

   Letter to the Editor 21 November 2020 Pages: 345 - 347

   

2. Analysis of Liquid Pipelines Accidents Causes, Consequences and Contributing Factors: A Review Study

   • Elham Mahmoodi
   • Seyed Bagher Mortazavi
   • Hasan Asilian Mahabadi

   Lessons Learned 02 January 2021 Pages: 348 - 362

   

3. Premature Failure of Submarine Well Fluid Lines: A Case Study

   • Jeetendra Gupta
   • Maushmi K. Talukdar
   • Suraj Makkar

   Case History---Peer-Reviewed 20 November 2020 Pages: 363 - 369

   

4. Fracture Failure of Dropper Wires in the Power Supply System of a Subway Line

   • Guoqiang Liu
   • Ning Ding
   • Weimin Guo

   Case History---Peer-Reviewed 22 November 2020 Pages: 370 - 375

   

5. Case Studies in Graphitic Corrosion of Cast Iron Pipe

   • Tim A. Jur
   • James I. Middleton Jr.
   • James R. Grey Jr.

   Case Study---Peer-Reviewed 02 January 2021 Pages: 376 - 386

   

6. Root Cause Analysis and Mitigation of White Patch Formation in Automotive Headlamp

   • Mangesh D Pustode
   • C. S. Singh
   • Anindya Dutta

   Case History---Peer-Reviewed 01 February 2021 Pages: 387 - 397

   

7. Product News

   News 03 March 2021 Pages: 398 - 398

   

8. Industry Updates

   News 04 March 2021 Pages: 399 - 401

   

9. Professional Resources

   News 17 February 2021 Pages: 402 - 402

   

10. Training

    Calendar 16 March 2021 Pages: 403 - 406

11. Events

    Calendar 15 February 2021 Pages: 407 - 409

12. The Impact of Low Plasticity Burnishing Process Parameters on Residual Stress and Percentage of Cold Working Distribution in Ti-6Al-4V Alloy

    • Harish
    • D. Shivalingappa
    • N. Raghavendra

    Technical Article---Peer-Reviewed 28 January 2021 Pages: 410 - 418

    

13. Failure Analysis of Unconfined Brick Masonry with Experimental Verification

    • Anjani Kumar Shukla
    • Saurav Kumar
    • P. R. Maiti

    Technical Article---Peer-Reviewed 02 February 2021 Pages: 419 - 428

    

14. Evaluation of the Bolted Metallic Repair on Damaged Stiffened Composite Panel

    • Xiangming Chen
    • Jiong Zhang
    • Xiufeng Tang

    Technical Article---Peer-Reviewed 19 November 2020 Pages: 429 - 444

    

15. Finite Element Analysis of Viscoelastic/Damage Behaviors of Composite Solid Propellant for Underwater Intelligent Equipment

    • S. F. Gong
    • J. X. Li
    • P. F. Liu

    Technical Article---Peer-Reviewed 19 November 2020 Pages: 445 - 450

    

16. Damage Mechanism Evaluation of Polymer Matrix Composite Reinforced with Glass Fiber via Modified Arcan Test Specimens

    • Mohamed Abu-Okail
    • M. Nafea
    • Ahmed Abu-Oqail

    Technical Article---Peer-Reviewed 20 November 2020 Pages: 451 - 461

    

17. The Combined Effect of High Temperature and Ethylene Glycol (EG) on Polyethylene Terephthalate (PET)-Reinforced Coolant Hose Failure in Combustion Engines

    • A. Aronson
    • R. Kafri
    • O. Levi

    Technical Article---Peer-Reviewed 23 November 2020 Pages: 462 - 471

    

18. Influence of Punch Velocity on Deformation Behavior in Deep Drawing of Aluminum Alloy

    • Yogesh Dewang
    • Vipin Sharma
    • Yash Batham

    Technical Article---Peer-Reviewed 25 November 2020 Pages: 472 - 487

    

19. Failure Analysis of Rheocast Cylinder Head Covers of Hypereutectic Al–Si Alloys

    • Jian Feng

    Technical Article---Peer-Reviewed Open access 22 December 2020 Pages: 488 - 493

    

20. Failure Analysis of Heat Exchanger Using Internal Rotary Inspection System (IRIS)

    • Mohamed Fayas Saffiudeen
    • Abdullah Syed
    • Fasil T. Mohammed

    Technical Article---Peer-Reviewed 01 January 2021 Pages: 494 - 498

    

21. Contact Mechanics Response of Composite Cylindrical Roller Bearings Based on FEM

    • P. Zhu
    • T. Zheng
    • J. Zhang

    Technical Article---Peer-Reviewed 01 January 2021 Pages: 499 - 506

    

22. Multiple-Output Fracture Characteristics Optimization of Bi-material Interfaces for Composite Pipe Repair Using Swarm Intelligence Technique

    • Ibrahim A. Alnaser
    • Mohammed Yunus
    • Turki Alamro

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 507 - 517

    

23. A Study on the Resolution of Pin-dent Defects in Automotive Door Panels

    • T. K. Roy
    • V. Balakrishnan
    • Shainu Suresh

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 518 - 524

    

24. Mechanical Fractography and Worn Surface Analysis of Nanographite and ZrO₂-Reinforced Al7075 Alloy Aerospace Metal Composites

    • Raj Kumar
    • R. G. Deshpande
    • V. Auradi

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 525 - 536

    

25. The Effect of Core Shape on the Bending Response of Sandwich Panels with Filled and Unfilled Sine and Square Corrugated Cores

    • Faezeh Hamidin
    • Amin Farrokhabadi
    • Hamed Ahmadi

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 537 - 546

    

26. Investigation of Corrosion Inhibition Property of Triazole-Based Schiff Bases on Maraging Steel in Acid Mixtures

    • Rachael Natash Mary
    • Ronald Nazareth
    • Krishnamurthy Potla

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 547 - 562

    

27. Failure Analysis of a Bucket Elevator Shaft

    • B. Gurudath
    • Kamal Kishore Kumawat
    • Subray R. Hegde

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 563 - 569

    

28. Studying the Effect of Water Hammer Shock Wave on Composite Repaired Patches Based on ASME PCC-2

    • A. Saffar
    • A. Darvizeh
    • M. Alitavoli

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 570 - 581

    

29. Experimental Investigation on the Fatigue Behavior of Glass Fiber-Reinforced Epoxy Composites Under Rotating Bending Loads

    • C. Hemanth Kumar
    • R. P. Swamy

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 582 - 587

    

30. Damage Analysis of Tool-Based Micromachining Setup Using Electrical Continuity-Based Contact Detection System

    • R. K. Veeresha
    • Muralidhara
    • M. K. Shilpa

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 588 - 594

    

31. Failure Analysis of Reciprocating CO₂ Compressor

    • Preetish C. Dsilva
    • Preethi Shetty
    • Subray R. Hegde

    Technical Article---Peer-Reviewed 02 January 2021 Pages: 595 - 603

    

32. Prominent Safety and Health Hazards During Crude Extraction: A Review of Process

    • Umang Kumar Yadav
    • Rishi Dewan
    • Abhijeet Singh

    Technical Article---Peer-Reviewed 03 January 2021 Pages: 604 - 609

    

33. Modeling and Vibration Analysis of a Gear Rotor-Bearing System with a Shaft Crack

    • Zhiguo Wan
    • Yihua Dou
    • Xinjuan Wei

    Technical Article---Peer-Reviewed 03 January 2021 Pages: 610 - 618

    

34. Fault Tree Analysis Using Bayesian Optimization: A Reliable and Effective Fault Diagnosis Approaches

    • Liu Jinfei
    • Li Yinglei
    • Li Jielin

    Technical Article---Peer-Reviewed 03 January 2021 Pages: 619 - 630

    

35. Microstructure, Mechanical Behavior and Tensile Fractography of 90-Micron-Sized Titanium Carbide Particles Reinforced Al2219 Alloy Die Cast Metal Composites

    • Jayasheel I. Harti
    • T. B. Prasad
    • S. Shiva Prakash

    Technical Article---Peer-Reviewed 03 January 2021 Pages: 631 - 639

    

36. Reliability Assessment and Improvement for Aircraft Lock Mechanism with Multiple Failure Modes

    • Kunling Song
    • Yugang Zhang
    • Linjie Shen

    Technical Article---Peer-Reviewed 04 January 2021 Pages: 640 - 648

    

37. Investigation of Anticorrosion and Mechanical Properties of Azole Functionalized Graphene Oxide Encapsulated Epoxy Coatings on Mild Steel

    • S. P. Vinodhini
    • Joseph Raj Xavier

    Technical Article---Peer-Reviewed 05 January 2021 Pages: 649 - 661

    

38. Effect of Modified Combustion Chamber on Performance Characteristics by using Blends of Simarouba Biodiesel

    • K. R. Lava
    • D. B. Ganesh
    • M. Vijaya Kumar Patil

    Technical Article---Peer-Reviewed 07 January 2021 Pages: 662 - 668

    

39. Effect of Component Twist on Friction in a Bolted Joint

    • D. P. Hess

    Technical Article---Peer-Reviewed 13 January 2021 Pages: 669 - 677

    

40. Cyclic Plastic Deformation Behavior of TC4 Titanium Alloy Under Different Microstructures and Load Conditions Using Finite Element Method

    • Guo-xing Chen
    • Cai-yi Liu

    Technical Article---Peer-Reviewed 23 January 2021 Pages: 678 - 688

    

41. Assessment of the Degraded High-Pressure Blades in a Land-Based Gas Turbine

    • Khier Sabri
    • Mohamed Ouali Si-Chaib
    • Mohamed Gaceb

    Technical Article---Peer-Reviewed 28 January 2021 Pages: 689 - 704