Abstract
This study presents the design and fabrication of a novel piezoelectric actuator for a micropump with check valve having the advantages of miniature size, light weight and low power consumption. The micropump is designed to have five major components, namely a piezoelectric actuator, a stainless steel chamber layer with membrane, two stainless steel channel layers with two valve seats, and a nickel check valve layer with two bridge-type check valves. A prototype of the micropump, with a size of 10 × 10 × 1.0 mm, is fabricated by precise manufacturing. The check valve layer was fabricated by nickel electroforming process on a stainless steel substrate. The chamber and the channel layer were made of the stainless steel manufactured using the lithography and etching process based on MEMS fabrication technology. The experimental results demonstrate that the flow rate of micropump accurately controlled by regulating the operating frequency and voltage. The flow rate of 1.82 ml/min and back pressure of 32 kPa are obtained when the micropump is driven with alternating sine-wave voltage of 120 Vpp at 160 Hz. The micropump proposed in this study provides a valuable contribution to the ongoing development of microfluidic systems.
Similar content being viewed by others
References
Abdullah M, Duwairi HM (2008) Thermal and flow analysis of two-dimensional fully developed flow in an AC magneto-hydrodynamic micropump. Microsyst Technol 14:1117–1123. doi:10.1007/s00542-008-0585-4
Amirouche F, Zhou Y, Johnson T (2009) Current micropump technologies and their biomedical applications. Microsyst Technol 15:647–666. doi:10.1007/s00542-009-0804-7
Chang HT, Lee CY, Wen CY (2007) Design and modeling of electromagnetic actuator in mems-based valveless impedance pump. Microsyst Technol 13:1615–1622. doi:10.1007/s00542-006-0332-7
Chen SC, Cheng CH, Lin YC (2007) Fabrication of components for a valve-less micropump of microejector by multilevel electroforming technology. Microsyst Technol 13:455–463. doi:10.1007/s00542-006-0209-9
Chen L, Lee S, Choo J, Lee EK (2008) Continuous dynamic flow micropumps for microfluid manipulation. J Micromech Microeng 18:1–22. doi:10.1088/0960-1317/18/1/013001
Fuhr G, Schnelle T, Wagner B (1994) Travelling wave-driven microfabricated electro-hydrodynamic pumps for liquids. J Micromech Microeng 4:217–226. doi:10.1088/0960-1317/4/4/007
Kang J, Mantese JV, Auner GW (2009) A self-priming, high performance, check valve diaphragm micropump made from SOI wafers. J Micromech Microeng 18:1–8. doi:10.1088/0960-1317/18/12/125021
Laser DJ, Santiago JG (2004) A review of micropumps. J Micromech Microeng 14:R35–R64. doi:10.1088/0960-1317/14/6/R01
Ma HK, Hou BR, Wu HY, Lin CY, Gao JJ, Kou MC (2008) Development and application of a diaphragm micro-pump with piezoelectric device. Microsyst Technol 14:1001–1007. doi:10.1007/s00542-007-0462-6
Makino E, Mitsuya T, Shibata T (2001) Fabrication of TiNi shape memory micropump. Sens Actuators A 88:256–262. doi:10.1016/S0924-4247(00)00522-7
Nguyen NT, Truong TQ (2004) A fully polymeric micropump with piezoelectric actuator. Sens Actuators B Chem 1:137–143. doi:10.1016/S0925-4005(03)00521-5
Nguyen NT, Huang X, Chuan TK (2002) MEMS-micropumps: a review. ASME J Fluids Eng 124:384–392. doi:10.1115/1.1459075
Nguyen NT, Truong TQ, Wong KK, Ho SS, Low LN (2004) Micro check valves for integration into polymeric microfluidic devices. J Micromech Microeng 14:69–75. doi:10.1088/0960-1317/4/1/309
Schomburg WK, Vollmer J, Bustgens B, Fahrenberg J, Hein H, Menz W (1994) Microfluidic components in LIGA technique. J Micromech Microeng 4:186–191. doi:10.1088/0960-1317/4/4/003
Sim WY, Yoon HJ, Jeong OC, Yang SS (2003) A phase change type of micropump with aluminum flap valves. J Micromech Microeng 13:286–294. doi:10.1088/0960-1317/13/2/317
Teymoori MM, Abbaspour-Sani E (2005) Design and simulation of a novel electrostatic peristaltic micromachined pump for drug delivery applications. Sens Actuators A 117:222–229. doi:10.1016/j.sna.2004.06.025
Truong TQ, Nguyen NT (2004) A polymeric piezoelectric micropump based on lamination technology. J Micromech Microeng 14:632–638. doi:10.1088/0960-1317/14/4/026
Tsai NC, Sue CY (2007) Review of MEMS-based drug delivery and dosing systems. Sens Actuators A 134:555–564. doi:10.1016/j.sna.2006.06.014
Verma P, Chatterjee D (2011) Parametric characterization of piezoelectric valveless micropump. Microsyst Technol 17:1727–1737. doi:10.1007/s00542-011-1364-1
Woias P (2005) Micropumps-past, progress and future prospects. Sens Actuators B 105:28–38. doi:10.1016/j.snb.2004.02.033
Xie J, Miao YN, Shih J, He Q, Liu J, Tai YC, Lee TD (2004) An electrochemical pumping system for on-chip gradient generation. Anal Chem 76:3756–3763
Xie K, Lai Y, Guo X, Campbell RJ (2010) A three phase serpentine micro electrode array for AC electroosmotic flow pumping. Microsyst Technol 16:1825–1830. doi:10.1007/s00542-010-1106-9
Acknowledgments
The authors would like to thank the National Science Council of the Taiwan for financially supporting this research under Contract No. NSC -99-2221-E-212-014-MY2.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheng, CH., Tseng, YP. Characteristic studies of the piezoelectrically actuated micropump with check valve. Microsyst Technol 19, 1707–1715 (2013). https://doi.org/10.1007/s00542-013-1857-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-013-1857-1