1. Performance-based evaluation of reinforced concrete buildings at vertical geometric regularity limit

   • Karanpal Singh Hardeep Singh Hazuria
   • Arshad K. Hashmi
   • L. G. Patil

   Technical Paper 02 November 2023 Article: 311

   

2. An experimental investigation for pullout response of granular pile anchors embedded in clayey soil

   • Hans Raj Vashishtha
   • Vishwas A. Sawant

   Technical Paper 01 November 2023 Article: 310

   

3. Assessing potential damage and energy dissipation in low-rise high-strength concrete frames with strong infill walls using applied element method

   • Hemanth Kumar Karaka
   • Rajesh Kumar Tripathi

   Technical Paper 31 October 2023 Article: 309

   

4. Application of lime-rice husk ash mixture (LRHA) for the stabilization of fine-grained soil: a state-of-the-art review

   • Gautam
   • Debjit Bhowmik

   State-of-the-Art Paper 31 October 2023 Article: 308

   

5. Unveiling optimal performance of SBS-modified asphalt mixture: crucial impact of elevated storage temperature and duration of binders

   • SK Sohel Islam
   • Ayana Ghosh
   • Sham S. Ravindranath

   Technical Paper 31 October 2023 Article: 307

   

6. Influence of mud waste and straw grass addition in fired bricks production: technical properties evaluation

   • Aaron N. Adazabra
   • G. Viruthagiri
   • Charity Tiose

   Case Study 31 October 2023 Article: 306

   

7. Settlement and load sharing behavior of piled raft foundation: a review

   • Dinesh Kumar Malviya
   • Adnan Ansari
   • Manojit Samanta

   State-of-the-Art Paper 30 October 2023 Article: 305

   

8. Examining TOD node typology using k-means, hierarchical, and latent class cluster analysis for a developing country

   • Md. Anwar Uddin
   • Sumit Roy

   Technical Paper 30 October 2023 Article: 304

   

9. Variable curvature pendulum isolator system for seismic isolation of liquid storage tanks

   • Agrahara Krishnamoorthy
   • Vasu Bhadania
   • M. Prasanna Kumar

   Technical Paper 29 October 2023 Article: 303

   

10. Tempo-spatial quality assessment of spring water using WQI and GIS modeling in Western Ghats region of India

    • Ujval N. Utagi
    • B. K. Purandara

    Technical Paper 29 October 2023 Article: 302

    

11. Numerical study of design parameters influencing anchored diaphragm walls for deep excavation

    • Rafi’ M. Sulaiman Al-Ne’aimi
    • Hind K. Nasir

    Practice-oriented Paper 27 October 2023 Article: 301

    

12. Soft computing techniques to estimate the uniaxial compressive strength of mortar incorporated with cement kiln dust

    • Ahmed Salih Mohammed
    • Aso A. Abdalla
    • Kawan Ghafor

    Technical Paper 26 October 2023 Article: 300

    

13. Synthesizing the performance of deep learning in vision-based pavement distress detection

    • Zia U. A. Zihan
    • Omar Smadi
    • Mohamed S. Yamany

    Technical Paper 26 October 2023 Article: 299

    

14. Analysis and modelling of crash severity of vulnerable road users through discrete methods: a case study approach

    • Srinivasa Rao Gandupalli
    • Purnanandam Kokkeragadda
    • Mukund R. Dangeti

    Technical Paper 26 October 2023 Article: 298

    

15. Optimizing characteristics of high-performance concrete incorporating hybrid polypropylene fibers

    • Ahmed M. Tahwia
    • Marwa Mokhles
    • Walid E. Elemam

    Technical Paper Open access 25 October 2023 Article: 297

    

16. Development of impact factor expression for the design and performance evaluation of long-span-balanced cantilever-type prestressed box girder bridges

    • Bindesh Nunia
    • J. Prashanth
    • S. Choudhury

    Technical Paper 21 October 2023 Article: 296

    

17. Multi-criteria decision support system for bridge construction system selection utilizing value engineering and TOPSIS

    • Alaa ElMarkaby
    • Abdelmonem Sanad
    • Ebtisam Yehia

    Technical Paper Open access 18 October 2023 Article: 295

    

18. A systematic approach for rework reduction in precast buildings in India

    • Pravin Minde
    • Mrudula Kulkarni
    • Rahul Dandage

    Technical Paper 17 October 2023 Article: 294

    

19. Differential scanning calorimetry of aluminium EN AB-42000 alloy rheocasting semi-solid in different stage heating rates

    • Kawan M. Abdulrahman
    • Viktor Gonda
    • Mihály Réger

    Practice-oriented Paper Open access 17 October 2023 Article: 293

    

20. Development of synthetic acceleration time histories for seismic ground response studies for site classes C to E for Bihar region: a case study

    • Prabhakar Kumar
    • Shiv Shankar Kumar

    Case Study 17 October 2023 Article: 292

    

21. Experimental investigation of biochemical and geotechnical properties of municipal solid waste undergoing biodegradation for landfill design

    • Swati Patil
    • Mahesh Endait

    Technical Paper 15 October 2023 Article: 291

    

22. Mechanical behavior of reinforced concrete hybrid beams made with normal concrete, foamed cellular concrete and fiber reinforced foamed cellular concrete

    • Facundo Atuel Retamal
    • Viviana Carolina Rougier

    Technical Paper 13 October 2023 Article: 290

    

23. The flexural response of RC beams strengthened by EB/NSM techniques using FRP and metal materials: a state-of-the-art review

    • F. A. Megahed
    • M. H. Seleem
    • I. A. Sharaky

    Review Open access 13 October 2023 Article: 289

    

24. Optimizing the number of crews working in parallel and their work sequence to minimize project duration and cost for repetitive construction projects

    • Emad Abdelbasset
    • Abbas Hassan
    • Yasser A. Khalifa

    Technical Paper Open access 11 October 2023 Article: 288

    

25. The impact of using natural waste biopolymer cement on the properties of traditional/fibrous concrete

    • Sameh Yehia
    • Arafa M. Ibrahim
    • Doaa F. Ahmed

    Technical Paper Open access 11 October 2023 Article: 287

    

26. Effect of sulfur on the asphalt cement and asphalt concrete mixture: state of the art

    • Taisir Khedaywi
    • Madhar Haddad
    • Shareef Shareef

    State-of-the-Art Paper 09 October 2023 Article: 286

    

27. Liquefaction analysis of sand-tire mixture with a critical state two-surface plasticity model

    • Masoud Raveshi
    • Reza Noorzad

    Technical Paper 09 October 2023 Article: 285

    

28. A detailed laboratory investigation on evolving the mix design of roller compacted concrete containing RAP aggregates and SCMs

    • Pranav Sharma
    • Shashi Kant Sharma
    • Basireddy Sai Prathap Reddy

    Technical Paper 05 October 2023 Article: 284

    

29. A review of the role of glass waste on the fresh and mechanical properties of concrete as an environmentally friendly materials

    • Mohammad I. Al Biajawi
    • Rahimah Embong
    • Bassam A. Tayeh

    Review 05 October 2023 Article: 283