Articles

1. Surface roughness evaluation when brushing heat-resistant alloy components

   • Mikel González
   • Adrián Rodríguez
   • Luis Norberto López de Lacalle

   Original Article Open access 02 May 2024

   

2. Application of virtual manufacturing to predict scenarios and reduce physical and non-physical losses in construction

   • Paulo Cesar Duarte Junior
   • Shandy Alexandra Morassi Francisco
   • Altibano Ortenzi

   ORIGINAL ARTICLE 02 May 2024

   

3. Comparison of laser cladding properties of tantalum and tantalum pentoxide powders on titanium substrates

   • Yi-Ju Li
   • Yueh-Hung Hsieh
   • Chi-Sheng Chien

   ORIGINAL ARTICLE 02 May 2024

   

4. Stress interference in multilayer additive friction stir deposition of AA6061 aluminum

   • Teng Yang
   • Yuqi Jin
   • Narendra B. Dahotre

   ORIGINAL ARTICLE 02 May 2024

   

5. Size effects of voids on the mechanical properties of 3D printed parts

   • Hassan Gonabadi
   • Seyed Farhad Hosseini
   • Steve Bull

   ORIGINAL ARTICLE Open access 02 May 2024

   

6. Overcoming machining challenges in hybrid laser metal deposition of IN718 with heat-assisted minimum quantity lubrication

   • Angshuman Kapil
   • Ozan Can Ozaner
   • Abhay Sharma

   ORIGINAL ARTICLE 02 May 2024

   

7. Prediction of surface topography for the five-axis bull-nose end milling of directional plexiglass considering tool runout and dynamic displacement

   • Qingchu Chen
   • Qiang Guo
   • Yuwen Sun

   ORIGINAL ARTICLE 02 May 2024

   

8. Optimal ovoid lobe shape by an automatic calculation program and CFD using dynamic mesh technique

   • Chanyoung Shin
   • Seungseok Lee
   • Chul Kim

   ORIGINAL ARTICLE 02 May 2024

   

9. Evaluation of mental workload in haptic-enabled virtual assembly training operations

   • Sharon Macias-Velasquez
   • Hugo I. Medellin-Castillo
   • Abel Garcia-Barrientos

   ORIGINAL ARTICLE 02 May 2024

   

10. Numerical study on rotary ultrasonic machining (RUM) characteristics of Nomex honeycomb composites (NHCs) by UCSB cutting tool

    • Tarik Zarrouk
    • Mohammed Nouari
    • Jamal-Eddine Salhi

    Original Article 01 May 2024

    

11. Directed energy deposition process optimization and factor interaction analysis by response surface methodology

    • Jun-Ru Qiu
    • Yu-Xiang Chen
    • Sheng-Jye Hwang

    Original Article 01 May 2024

    

12. The effect of weld heat input on the microstructure and mechanical properties of wire arc additively manufactured 15-5PH stainless steel

    • J Iain Sword
    • Alexander Galloway
    • Athanasios Toumpis

    Original Article Open access 30 April 2024

    

13. A methodology for the optimal placement of conformal cooling channels in injection molds: 2D transient heat transfer analysis

    • Hugo Miguel Silva
    • César Miguel de Almeida Vasques
    • António José Pontes

    ORIGINAL ARTICLE 30 April 2024

    

14. Study on an analytical model of asymmetrical and symmetrical tailor rolled blank rolling

    • Ji Wang
    • Xianlei Hu
    • Xue Feng

    ORIGINAL ARTICLE 30 April 2024

    

15. Improving mechanical properties of additively manufactured H13 steel through residual stress modulation by laser shock peening

    • Kai Guo
    • Wenjie Liu

    ORIGINAL ARTICLE 30 April 2024

    

16. Study on the mechanism of cutting Ti6Al4V with complex microstructure cutting tools

    • Dazhong Wang
    • Feiyang Chen
    • Guoqiang Guo

    ORIGINAL ARTICLE 30 April 2024

    

17. Hot-tube spinning process for manufacturing ultra-high pressure vessels (Type-I): process planning and implementation

    • Rivaldo Mersis Brilianto
    • Gunyoung Park
    • Chul Kim

    ORIGINAL ARTICLE 30 April 2024

    

18. A review of research progress on the minimization of weld lines in injection molding

    • Xi-jue Li
    • Ze-mian Zuo
    • Chang-yu Shen

    Critical Review 30 April 2024

    

19. Vapor chemical composition in electron beam powder bed fusion using Ti–6Al–4V powder

    • Vinicius G. Antunes
    • Abderzak el Farsy
    • Tiberiu Minea

    ORIGINAL ARTICLE 29 April 2024

    

20. Plateau stress estimation of aluminum foam by machine learning using X-ray computed tomography images

    • Yoshihiko Hangai
    • Yuki Sakaguchi
    • Tanaka Yuuki

    ORIGINAL ARTICLE 29 April 2024

    

21. Enhanced tool condition monitoring using wavelet transform-based hybrid deep learning based on sensor signal and vision system

    • Ahmed Abdeltawab
    • Zhang Xi
    • Zhang Longjia

    ORIGINAL ARTICLE 29 April 2024

    

22. Investigation of thermoforming processes of aerostructures: Simulation and microstructural analysis

    • Merve Çobanoğlu
    • Remzi Ecmel Ece
    • Fahrettin Öztürk

    ORIGINAL ARTICLE Open access 29 April 2024

    

23. Laser powder bed fusion of NdFeB and influence of powder bed heating on density and magnetic properties

    • Kübra Genç
    • Sirapob Toyting
    • Kamran Mumtaz

    ORIGINAL ARTICLE Open access 29 April 2024

    

24. Size and build strategy effects for the L-PBF process applied to Inconel 625 vertical struts: a combined numerical and experimental approach

    • Patrice Peyre
    • Julien Rodrigues Da Silva
    • Thierry Baudin

    ORIGINAL ARTICLE 29 April 2024

    

25. In situ process monitoring of multi-layer deposition in wire arc additive manufacturing (WAAM) process with acoustic data analysis and machine learning

    • Md Arifur Rahman
    • Suhaima Jamal
    • Hossein Taheri

    ORIGINAL ARTICLE 29 April 2024

    

26. Computational investigation of a novel metal thickness measurement system with coaxial triple-coil sensor for chemical mechanical polishing

    • Chengxin Wang
    • Fangxin Tian
    • Xinchun Lu

    Original Article 29 April 2024

    

27. A technical perspective on integrating artificial intelligence to solid-state welding

    • Sambath Yaknesh
    • Natarajan Rajamurugu
    • Manzoore Elahi Mohammad Soudagar

    Critical Review Open access 29 April 2024

    

28. Analysis of uncut chip geometry and cutting force in gear skiving process using a cylindrical tool

    • Erkuo Guo
    • Mingfeng Chen
    • Xin Gu

    ORIGINAL ARTICLE 29 April 2024

    

29. Mathematical model of non-generated straight bevel gears based on a four-axis CNC machine

    • Yi-Pei Shih
    • Guang-Yu Chen

    Original Article 28 April 2024

    

30. Powder spreading process monitoring of selective laser melting manufacturing by using a convolutional Takagi–Sugeno–Kang fuzzy neural network

    • Chun-Hui Lin
    • Cheng-Jian Lin
    • Shyh-Hau Wang

    ORIGINAL ARTICLE 27 April 2024

    

31. Multiparameter signal-to-noise ratio optimization for end milling cutting conditions of aluminium alloy 5083

    • John Kechagias

    ORIGINAL ARTICLE Open access 27 April 2024

    

32. A review on 3D measurement of highly reflective objects using structured light projection

    • Xinyue Zhao
    • Tiancheng Yu
    • Zaixing He

    Critical Review 27 April 2024

    

33. Numerical and experimental investigation on temperature field during small-module gear creep feed deep profile grinding

    • Jun Yi
    • Kanglin Pei
    • Hui Deng

    ORIGINAL ARTICLE 26 April 2024

    

34. Technical review on design optimization in forging

    • Satoshi Kitayama

    Critical Review Open access 26 April 2024

    

35. A review of 3D-printed bimetallic alloys

    • Mohammed Junaid Shekh
    • Lenissongui C. Yeo
    • Jacob L. Bair

    Critical Review 26 April 2024

    

36. A new machining test to identify position-independent geometric errors of rotary axes for five-axis machine tools

    • Kejian Chen
    • Sitong Xiang
    • Hainan Zhang

    ORIGINAL ARTICLE 26 April 2024

    

37. Exploiting image quality measure for automatic trajectory generation in robot-aided visual quality inspection

    • Atae Jafari-Tabrizi
    • Dieter P. Gruber
    • Andrej Gams

    ORIGINAL ARTICLE Open access 26 April 2024

    

38. Comparison of drilling and milling hole-forming mechanism of AFRP and experimental study of MQL

    • Lin Wang
    • Xiangbao Li
    • Liqiang Xiao

    ORIGINAL ARTICLE 26 April 2024

    

39. Experimental and numerical study on thin silicon wafer CO₂ laser cutting and damage investigation

    • Kaveh Moghadasi
    • Khairul Fikri Tamrin
    • Amir Azam Khan

    ORIGINAL ARTICLE 26 April 2024

    

40. Hybrid decision-making in atmospheric plasma spraying enables human–machine teaming

    • Franziska Bocklisch
    • Steffen F. Bocklisch
    • Shrikant Joshi

    ORIGINAL ARTICLE Open access 26 April 2024

    

41. Fabrication of the optical lens on single-crystal germanium surfaces using the laser-assisted diamond turning

    • Hanheng Du
    • Yidan Wang
    • Suet To

    ORIGINAL ARTICLE Open access 25 April 2024

    

42. Improving forming accuracy of variable-diameter tube by electromagnetic forming using segmented coil

    • Changxing Li
    • Xiaofei Xu
    • Liang Li

    ORIGINAL ARTICLE 25 April 2024

    

43. Research on surface integrity of TC4 titanium alloy by ultrasonic surface rolling peening

    • Yi Wang
    • Yanhou Liu
    • Jinguo Han

    ORIGINAL ARTICLE 25 April 2024

    

44. Dynamic modeling of thin-walled CFRP surface milling and the effect of chatter on surface quality

    • Fuji Wang
    • Jun Deng
    • Xing Ma

    ORIGINAL ARTICLE 25 April 2024

    

45. Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

    • Jiajing Li
    • Lei Lu
    • Zhenyu Wang

    ORIGINAL ARTICLE 25 April 2024

    

46. Flexural strength of the sandwich-structured parts made of polylactic-acid and thermoplastic-polyurethane fabricated by using extrusion-based multi-material additive manufacturing

    • Adam Zuyyinal Adib
    • Juan Pratama
    • Budi Arifvianto

    ORIGINAL ARTICLE 25 April 2024

    

47. Springback prediction using point series and deep learning

    • Yang Bingqian
    • Yuanyi Zeng
    • Anh Nguyen

    ORIGINAL ARTICLE Open access 25 April 2024

    

48. Ultrasonic testing in the field of engineering joining

    • Zongkai Fan
    • Keran Bai
    • Chao Chen

    Critical Review 25 April 2024

    

49. Industrially relevant injection moulding apparatus for in situ time-resolving small-angle X-ray scattering measurements

    • André A. Costa
    • Fábio Gameiro
    • Geoffrey R. Mitchell

    ORIGINAL ARTICLE Open access 25 April 2024

    

50. Nanosecond multi-passes laser surface texturing on AISI 301LN TRIP steel

    • Mohammad Rezayat
    • Mahmoud Moradi
    • Antonio Mateo

    Original Article 25 April 2024