Articles

1. Correction: Application of TPB-SOR theory on remanufactured product buying intention among Malaysian consumers: mediation of TPB constructs and functional value

   • Syed Shah Alam
   • Mohammad Masukujjaman
   • Nik Mohd Hazrul Nik Hashim

   Correction 08 March 2024

2. A Reconfigurable Cellular Remanufacturing Architecture: a multi-objective design approach

   • Camilo Mejía-Moncayo
   • Jean-Pierre Kenné
   • Lucas A. Hof

   Research 05 March 2024

   

3. Sustainable remanufacturing management approaches and applications model in end-of-life vehicles: a critical review and classification

   • Jia Yuik Chong
   • Muhamad Zameri Mat Saman
   • Nor Hasrul Akhmal Ngadiman

   Review 10 February 2024 Pages: 169 - 184

   

4. A mathematical model for aerospace product MRO scheduling with remanufacturing

   • Yasser Ghamary
   • Mingyuan Chen

   Research 06 February 2024 Pages: 93 - 123

   

5. Exploring the state of health of electric vehicle batteries at end of use; hierarchical waste flow analysis to determine the recycling and reuse potential

   • Narjes Fallah
   • Colin Fitzpatrick

   Research Open access 26 January 2024 Pages: 155 - 168

   

6. Application of TPB-SOR theory on remanufactured product buying intention among Malaysian consumers: mediation of TPB constructs and functional value

   • Syed Shah Alam
   • Mohammad Masukujjaman
   • Nik Mohd Hazrul Nik Hashim

   Research 23 January 2024 Pages: 125 - 154

   

7. Robotics for electric vehicles battery packs disassembly towards sustainable remanufacturing

   • Enrico Villagrossi
   • Tito Dinon

   Research Open access 28 November 2023 Pages: 355 - 379

   

8. Remanufacturing capacity planning in new markets—effects of different forecasting assumptions on remanufacturing capacity planning for electric vehicle batteries

   • Sandra Huster
   • Sonja Rosenberg
   • Frank Schultmann

   Research Open access 06 October 2023 Pages: 283 - 304

   

9. Repair of additive manufactured thin-wall geometry using electrospark deposition

   • Jihui Yan
   • Pablo D. Enrique
   • Norman Y. Zhou

   Research 19 September 2023 Pages: 333 - 353

   

10. Towards sustainable manufacturing by enabling optimum selection of life extension strategy for industrial equipment based on cost modelling

    • Nasser Amaitik
    • Ming Zhang
    • Dimitrios Tzovaras

    Research Open access 05 September 2023 Pages: 263 - 282

    

11. A study of manufacturing and inventory strategies in close-loop supply chain: a two-phase news-vendor model with an extended warranty

    • P. Jalapathy
    • M. Mubashir Unnissa

    Research 01 September 2023 Pages: 305 - 332

    

12. Assessing the profitability of remanufacturing initiation: a literature review

    • Johan Vogt Duberg
    • Erik Sundin
    • Ou Tang

    Review Open access 01 September 2023 Pages: 69 - 92

    

13. Appropriately limiting quantities of remanufacturing products considering virtual inventory for stabilization of production resources

    • Jundai Koketsu
    • Aya Ishigaki
    • Tetsuo Yamada

    Research Open access 27 July 2023 Pages: 243 - 261

    

14. Material flow control in Remanufacturing Systems with random failures and variable processing times

    • Felix Paschko
    • Steffi Knorn
    • Markus Kemke

    Research Open access 16 May 2023 Pages: 161 - 185

    

15. Analysis of the life cycle environmental impact reductions of remanufactured turbochargers

    • Jong-Hyo Lee
    • Hong-Yoon Kang
    • Hwan-Ho Choi

    Research Open access 05 May 2023 Pages: 187 - 206

    

16. Remanufactured products: A systematic review from the consumer perspective

    • Aybegüm Güngördü Belbağ
    • Sedat Belbağ

    Review 10 April 2023 Pages: 207 - 241

    

17. Assessment of the disassemblability of electric bicycle motors for remanufacturing

    • Julian Grosse Erdmann
    • Jan Koller
    • Frank Döpper

    Research Open access 13 March 2023 Pages: 137 - 159

    

18. A remanufacturing process optimization method based on integrated fuzzy QFD and FMEA

    • Junli Shi
    • Mengmeng Ren
    • Jipei Cui

    Research 29 December 2022 Pages: 121 - 136

    

19. Alignment of design rules for additive manufacturing and remanufacturing

    • Linda Schlesinger
    • Jan Koller
    • Frank Döpper

    Research Open access 22 December 2022 Pages: 99 - 119

    

20. Application of hybrid ISM-DEMATEL approach for analyzing the barriers of automotive remanufacturing: a real-world case study

    • Alireza Shahedi
    • Salman Nazari-Shirkouhi
    • Maryam Shahedi

    Case study 14 December 2022 Pages: 67 - 98

    

21. Systematic quantitative investigation of the unscrewing process with regard to breakaway torque

    • Simon Mangold
    • Eduard Gerlitz
    • Jürgen Fleischer

    Research Open access 02 December 2022 Pages: 53 - 66

    

22. Value-retained vs. impacts avoided: the differentiated contributions of remanufacturing, refurbishment, repair, and reuse within a circular economy

    • Jennifer D. Russell
    • Nabil Z. Nasr

    Research Open access 28 November 2022 Pages: 25 - 51

    

23. Optimization of sustainable reverse logistics network with multi-objectives under uncertainty

    • Abbas Al-Refaie
    • Tamara Kokash

    Research 16 November 2022 Pages: 1 - 23

    

24. Laser cutting of carbon fiber reinforced plastic components for remanufacturing

    • Farhan Arshed
    • Abdul Ahmad
    • Ioannis Metsios

    Research Open access 25 July 2022 Pages: 411 - 433

    

25. Mapping the competencies of reconfigurable manufacturing system with the requirements of industry 4.0

    • Rajesh Pansare
    • Gunjan Yadav
    • Suketu Jani

    Research 20 June 2022 Pages: 385 - 409

    

26. Simultaneous determination of design, pricing, and an end-of-life option of a product

    • Jie Zhang
    • Subhash C. Sarin

    Research 21 May 2022 Pages: 357 - 383

    

27. Component reuse strategy (CRS) for continuous reinforced thermo-sets enabling circular economy

    • Justus von Freeden
    • Alexander Husemann
    • Stefan Caba

    Research Open access 10 May 2022 Pages: 339 - 355

    

28. Multi-echelon closed-loop supply chain production-inventory model with finite manufacturing and remanufacturing rates

    • B. K. Mawandiya
    • Dhairya Patel
    • K. M. Patel

    Research 04 May 2022 Pages: 303 - 337

    

29. A study on end of life photovoltaics as a model for developing industrial synergistic networks

    • N. Mathur
    • J. W. Sutherland
    • S. Singh

    Research 26 April 2022 Pages: 281 - 301

    

30. Pricing decisions of two-echelon remanufacturing supply chain with remanufacturer’s fairness concerns

    • Xiaogang Cao
    • Hui Wen
    • Cuiwei Zhang

    Research 20 April 2022 Pages: 253 - 280

    

31. A lot sizing model for two items with imperfect manufacturing process, time varying demand and return rates, dependent demand and different quality grades

    • Anneri van Zyl
    • Olufemi Adetunji

    Research 12 April 2022 Pages: 227 - 252

    

32. Challenges of the South African economy to transition to a circular economy: a case of remanufacturing

    • Ifije ohiomah
    • Nita Sukdeo

    Research 04 March 2022 Pages: 213 - 225

33. The strategic value of design for remanufacturing: a case study of professional imaging equipment

    • Nina Boorsma
    • David Peck
    • Ruud Balkenende

    Case study Open access 12 February 2022 Pages: 187 - 212

    

34. Effective adoption of remanufacturing practices: a step towards circular economy

    • Shahbaz Khan
    • Abid Haleem
    • Nosheen Fatma

    Research 11 February 2022 Pages: 167 - 185

    

35. Additive or subtractive manufacturing: Analysis and comparison of automotive spare-parts

    • William S. Barbosa
    • Renan F. F. Wanderley
    • Flavia M. Gonçalves

    Case study 25 October 2021 Pages: 153 - 166

    

36. Forward cycle time distributions for returnable transport items

    • Barry R. Cobb
    • Linda Li

    Research 17 September 2021 Pages: 125 - 151

    

37. A capacitated disassembly scheduling problem considering processing technology selection and parts commonality

    • M. N. Darghouth
    • M. Abdel-Aal

    Research 16 August 2021 Pages: 243 - 261

    

38. Dual and Multi-channel closed-loop supply chains: A state of the art review

    • Linda Tombido
    • Imam Baihaqi

    Review 09 August 2021 Pages: 89 - 123

    

39. Investigation of remanufacturing technologies for medical equipment in the UK and context in which technology can be exported in the developing world

    • Kingsley Oturu
    • WL Ijomah
    • Jacob Rodger

    Review Open access 04 August 2021 Pages: 227 - 242

    

40. Pricing strategy and competition for new and remanufactured products across generations

    • Liangchuan Zhou
    • Surendra M. Gupta

    Research 27 July 2021 Pages: 47 - 88

    

41. A system dynamics model for the impact of capacity limits on the Bullwhip effect (BWE) in a closed-loop system with remanufacturing

    • Linda Tombido
    • Louis Louw
    • Suhaiza Zailani

    Research 30 March 2021 Pages: 1 - 45

    

42. Devising the performance indicators due to the adoption of reverse logistics enablers

    • Himanshu Prajapati
    • Ravi Kant
    • Ravi Shankar

    Research 07 January 2021 Pages: 195 - 225

    

43. An MCMC based Bayesian inference approach to parameter estimation of distributed lag models for forecasting used product returns for remanufacturing

    • Mohammed Geda
    • C. K. Kwong

    Research 06 January 2021 Pages: 175 - 194

    

44. An examination of competitive strategy in buyer-supplier relationships for remanufacturing

    • Iara Tonissi Moroni-Cutovoi

    Review 04 January 2021 Pages: 147 - 174

    

45. An efficient tool-path planning approach for repair of cylindrical components via laser cladding

    • Habiba Zahir Imam
    • Yufan Zheng
    • Rafiq Ahmad

    Research 19 November 2020 Pages: 137 - 146

    

46. Electrification in the automotive industry: effects in remanufacturing

    • Robert Casper
    • Erik Sundin

    Research Open access 17 November 2020 Pages: 121 - 136

    

47. Operation of an employee suggestion system in administration and production departments of a remanufacturing company

    • Damian Ostrowski
    • Jacek Jagodziński

    Case Study Open access 20 October 2020 Pages: 107 - 120

    

48. Achieving remanufacturing inspection using deep learning

    • Chigozie Nwankpa
    • Solomon Eze
    • Stephen Marshall

    Research Open access 15 October 2020 Pages: 89 - 105

    

49. The economic lot-sizing problem with remanufacturing and inspection for grading heterogeneous returns

    • Carolina Devoto
    • Emilia Fernández
    • Pedro Piñeyro

    Research 02 October 2020 Pages: 71 - 87

    

50. Vision guided robotic inspection for parts in manufacturing and remanufacturing industry

    • Aamir Khan
    • Carmelo Mineo
    • Gareth Pierce

    Research Open access 21 August 2020 Pages: 49 - 70