Volume 11, Issue 1

Search all Journal of Petroleum Exploration and Production Technology articles

January 2021

Journal of Petroleum Exploration and Production Technology

Filter by

Volume:

Sort by

Date published:

New to old Old to new

35 articles in this issue

Influence factors and effect prediction model of the tertiary migrations of remaining oil
Rongda Zhang
Guanghui Yang
Hanqiao Jiang
Original Paper-Production Engineering Open access 28 October 2020 Pages: 1 - 10
Reservoir quality evaluation of the Farewell sandstone by integrating sedimentological and well log analysis in the Kupe South Field, Taranaki Basin-New Zealand
S. M. Talha Qadri
Md Aminul Islam
Ahmed K. Abd El-Aal
Original Paper-Exploration Geology Open access 18 November 2020 Pages: 11 - 31
Geo-seismic model for petroleum plays an assessment of the Zamzama area, Southern Indus Basin, Pakistan
Muhammad Akram Qureshi
Shahid Ghazi
Shakeel Ahmad
Original Paper-Exploration Geology Open access 01 December 2020 Pages: 33 - 44
Application of seismic stratigraphy in reservoir characterisation: a case study of the passive margin deposits of the northern Orange Basin, South Africa
Chris Adesola Samakinde
Jan Marinus Van Bever Donker
Musa Manzi
Original Paper-Exploration Geology Open access 01 December 2020 Pages: 45 - 61
Preliminary investigation of the hydrocarbon generation potential from the post-rift Abbas shale Formation (Pliocene) in the Tihamah Basin, south-eastern Yemeni Red Sea
Mohammed Hail Hakimi
Abbas F. Gharib
Madyan M. A. Yahya
Original Paper-Exploration Geology Open access 22 November 2020 Pages: 63 - 73
Rock physics and geomechanical application in the interpretation of rock property trends for overpressure detection
Dorcas S. Eyinla
Michael A. Oladunjoye
Boris B. Bate
Original Paper-Exploration Geology Open access 21 November 2020 Pages: 75 - 95
Comparative assessment of Mucuna solannie as an alternative fluid loss control material in synthetic drilling fluid design
Kevin C. Igwilo
N. Uwaezuoke
Victor G. Ikoro
Original Paper-Exploration Engineering Open access 19 November 2020 Pages: 97 - 107
Improved ST-FZI method for permeability estimation to include the impact of porosity type and lithology
Hamed Amraei
Reza Falahat
Original Paper-Exploration Engineering Open access 07 December 2020 Pages: 109 - 115
Modelling and mapping hydrocarbon saturated sand reservoir using Poisson’s impedance (PI) inversion: a case study of Bonna field, Niger Delta swamp depobelt, Nigeria
Aniefiok Sylvester Akpan
Francisca Nneka Okeke
Nyakno Jimmy George
Original Paper-Exploration Geophysics Open access 31 October 2020 Pages: 117 - 132
Formation evaluation and reservoir characteristics of the Messinian Abu Madi sandstones in Faraskour Gas Field, onshore Nile Delta, Egypt
Mahmoud Leila
Ali Eslam
Ahmed Elgendy
Original Paper-Production Engineering Open access 10 October 2020 Pages: 133 - 155
Characteristics of micro- and nano-pores in shale oil reservoirs
Debin Xia
Zhengming Yang
Wei Lin
Original Paper-Production Engineering Open access 07 October 2020 Pages: 157 - 169
Pore structure and its control on reservoir quality in tight sandstones: a case study of the Chang 6 member of the Upper Triassic Yanchang Formation in the Jingbian oilfield in the Ordos Basin, China
Yubin Bai
Jingzhou Zhao
Yong Fu
Original Paper-Exploration Geology Open access 16 November 2020 Pages: 171 - 189
Multi-scale fracture prediction and characterization method of a fractured carbonate reservoir
Zhang Xiaoxia
Yu Jiajie
Wang Chao
Original Paper-Exploration Geophysics Open access 11 November 2020 Pages: 191 - 202
Evaluation of drilling muds enhanced with modified starch for HPHT well applications
Aliyu Adebayo Sulaimon
Sarah Abidemi Akintola
Sunday Oloruntoba Isehunwa
Review Paper-Exploration Engineering Open access 31 October 2020 Pages: 203 - 218
Integrated mechanical earth model and quantitative risk assessment to successful drilling
Alireza Noohnejad
Kaveh Ahangari
Kamran Goshtasbi
Original Paper-Production Engineering Open access 20 October 2020 Pages: 219 - 231
Rheological impact and economic implications of partial to total substitution of imported bentonite clay for oil and gas drilling operations in Nigeria
Oghenerume Ogolo
Akeem Arinkoola
Ternenge Joseph Chior
Original Paper-Exploration Engineering Open access 04 December 2020 Pages: 233 - 242
A solution for funding the development of technology in oilwell drilling
Dalmo S. Amorim Jr
Otto L.A. Santos
Ana Carolina Chieregati
Original Paper-Exploration Engineering Open access 03 November 2020 Pages: 243 - 252
Saybolt color prediction for condensates and light crude oils
Jia Jia Leam
Cheng Seong Khor
Sarat C. Dass
Original Paper-Production Engineering Open access 12 November 2020 Pages: 253 - 268
Determination of gas-saturated oil density at reservoir conditions and development of quality control index of PVT laboratory report
Muhammad Ali Al-Marhoun
Original Paper-Production Engineering Open access 06 December 2020 Pages: 269 - 277
Modeling n-alkane solubility in supercritical CO₂ via intelligent methods
Reza Songolzadeh
Khalil Shahbazi
Mohammad Madani
Original Paper-Production Engineering Open access 22 October 2020 Pages: 279 - 287
Treatment of produced water from Niger Delta oil fields using simultaneous mixture of local materials
S. G. Udeagbara
S. O. Isehunwa
I. U. Oguamah
Original Paper-Production Engineering Open access 22 October 2020 Pages: 289 - 302
Carbon dioxide sequestration in underground formations: review of experimental, modeling, and field studies
Shams Kalam
Teslim Olayiwola
Abeeb A. Awotunde
Review Paper-Production Engineering Open access 03 November 2020 Pages: 303 - 325
Influence of CO₂ retention mechanism storage in Alberta tight oil and gas reservoirs at Western Canadian Sedimentary Basin, Canada: hysteresis modeling and appraisal
Perumal Rajkumar
Venkat Pranesh
Ramadoss Kesavakumar
Original Paper-Production Geology Open access 01 December 2020 Pages: 327 - 345
A predictive protocol to obtain maximum water-free oil production rate for perforated vertical wells
James O. Adeleye
Olugbenga Olamigoke
Oluseun T. Mumuni
Original Paper-Production Engineering Open access 13 October 2020 Pages: 347 - 357
Significant production improvement using optimization of completion and artificial lift: case studies from South-West Iran
Rahman Ashena
Mahmood Bataee
Mohammad Mirhashemi
Original Paper-Production Engineering Open access 29 November 2020 Pages: 359 - 384
Optimizing productivity in oil rims: simulation studies on horizontal well placement under simultaneous oil and gas production
Oluwasanmi Olabode
Sunday Isehunwa
Daniel Ake
Original Paper-Production Geophysics Open access 27 November 2020 Pages: 385 - 397
Production simulations based on a productivity potential proxy function: An application to UNISIM-I-D and PUNQ-S3 synthetic reservoirs
Waldir L. Roque
Cristina P. Araújo
Original Paper-Production Engineering Open access 19 October 2020 Pages: 399 - 410
A novel approach to solve the water saturation challenges in reservoirs under LoSal water injection
Moustafa Oraby
Mohamed Khairy
Marwan Moussa
Original Paper-Production Engineering Open access 06 November 2020 Pages: 411 - 424
Experimental study and modeling of water-based fluid imbibition process in Middle and Lower Indus Basin Formations of Pakistan
Muhammad Arqam Khan
Javed Haneef
Syed Imran Ali
Original Paper-Exploration Engineering Open access 29 October 2020 Pages: 425 - 438
Application of principal component analysis on water flooding effect evaluation in natural edge-bottom water reservoir
Xiaoyan Geng
Mei Qi
Yunbo Li
Original Paper-Production Engineering Open access 03 December 2020 Pages: 439 - 449
Applying low-salinity water to alter wettability in carbonate oil reservoirs: an experimental study
Erfan Hosseini
Zhongwei Chen
Dana Mohammadnazar
Original Paper-Production Engineering Open access 23 October 2020 Pages: 451 - 475
Profile control performance and field application of preformed particle gel in low-permeability fractured reservoir
Bin Xu
Yan Wang
Original Paper-Production Engineering Open access 25 November 2020 Pages: 477 - 482
Rate and pressure behavior considering the fractal characteristics of structurally disordered fractured reservoirs
Salam Al-Rbeawi
Original Paper-Production Engineering Open access 06 October 2020 Pages: 483 - 507
Principal component analysis-assisted selection of optimal denoising method for oil well transient data
Bing Zhang
Khafiz Muradov
Akindolu Dada
Original Paper-Production Engineering Open access 10 October 2020 Pages: 509 - 530
Occurrence of naphthenate deposition in crude oil production field offshore Niger Delta
Opeyemi Lawal
Solomon A. Adekola
Akinsehinwa Akinlua
Short Communication-Production Geology Open access 21 November 2020 Pages: 531 - 537

Volume 11, Issue 1

Influence factors and effect prediction model of the tertiary migrations of remaining oil

Reservoir quality evaluation of the Farewell sandstone by integrating sedimentological and well log analysis in the Kupe South Field, Taranaki Basin-New Zealand

Geo-seismic model for petroleum plays an assessment of the Zamzama area, Southern Indus Basin, Pakistan

Application of seismic stratigraphy in reservoir characterisation: a case study of the passive margin deposits of the northern Orange Basin, South Africa

Preliminary investigation of the hydrocarbon generation potential from the post-rift Abbas shale Formation (Pliocene) in the Tihamah Basin, south-eastern Yemeni Red Sea

Rock physics and geomechanical application in the interpretation of rock property trends for overpressure detection

Comparative assessment of Mucuna solannie as an alternative fluid loss control material in synthetic drilling fluid design

Improved ST-FZI method for permeability estimation to include the impact of porosity type and lithology

Modelling and mapping hydrocarbon saturated sand reservoir using Poisson’s impedance (PI) inversion: a case study of Bonna field, Niger Delta swamp depobelt, Nigeria

Formation evaluation and reservoir characteristics of the Messinian Abu Madi sandstones in Faraskour Gas Field, onshore Nile Delta, Egypt

Characteristics of micro- and nano-pores in shale oil reservoirs

Pore structure and its control on reservoir quality in tight sandstones: a case study of the Chang 6 member of the Upper Triassic Yanchang Formation in the Jingbian oilfield in the Ordos Basin, China

Multi-scale fracture prediction and characterization method of a fractured carbonate reservoir

Evaluation of drilling muds enhanced with modified starch for HPHT well applications

Integrated mechanical earth model and quantitative risk assessment to successful drilling

Rheological impact and economic implications of partial to total substitution of imported bentonite clay for oil and gas drilling operations in Nigeria

A solution for funding the development of technology in oilwell drilling

Saybolt color prediction for condensates and light crude oils

Determination of gas-saturated oil density at reservoir conditions and development of quality control index of PVT laboratory report

Modeling n-alkane solubility in supercritical CO₂ via intelligent methods

Treatment of produced water from Niger Delta oil fields using simultaneous mixture of local materials

Carbon dioxide sequestration in underground formations: review of experimental, modeling, and field studies

Influence of CO₂ retention mechanism storage in Alberta tight oil and gas reservoirs at Western Canadian Sedimentary Basin, Canada: hysteresis modeling and appraisal

A predictive protocol to obtain maximum water-free oil production rate for perforated vertical wells

Significant production improvement using optimization of completion and artificial lift: case studies from South-West Iran

Optimizing productivity in oil rims: simulation studies on horizontal well placement under simultaneous oil and gas production

Production simulations based on a productivity potential proxy function: An application to UNISIM-I-D and PUNQ-S3 synthetic reservoirs

A novel approach to solve the water saturation challenges in reservoirs under LoSal water injection

Experimental study and modeling of water-based fluid imbibition process in Middle and Lower Indus Basin Formations of Pakistan

Application of principal component analysis on water flooding effect evaluation in natural edge-bottom water reservoir

Applying low-salinity water to alter wettability in carbonate oil reservoirs: an experimental study

Profile control performance and field application of preformed particle gel in low-permeability fractured reservoir

Rate and pressure behavior considering the fractal characteristics of structurally disordered fractured reservoirs

Principal component analysis-assisted selection of optimal denoising method for oil well transient data

Occurrence of naphthenate deposition in crude oil production field offshore Niger Delta

Navigation