1. Editorial Transitions for Journal of Materials Engineering and Performance

   • Rajiv Asthana

   Editorial 27 October 2020 Pages: 6247 - 6248

   

2. In Situ Process Monitoring for Additive Manufacturing Through Acoustic Techniques

   • Md Shahjahan Hossain
   • Hossein Taheri

   ReviewPaper 22 September 2020 Pages: 6249 - 6262

   

3. Microstructure and Mechanical Properties of Forged High Yttria 18Cr-ODS Steels

   • Ratnakar Singh
   • Ujjwal Prakash
   • Kinkar Laha

   OriginalPaper 18 September 2020 Pages: 6263 - 6276

   

4. Study of Structure and Properties of Fe-Based Amorphous Ribbons after Pulsed Laser Interference Heating

   • Olaf Czyż
   • Jan Kusiński
   • Roman Ostrowski

   OriginalPaper Open access 15 September 2020 Pages: 6277 - 6285

   

5. Interface Characterization of Ni/Al Bimetallic Explosively Welded Plate Manufactured with Application of Exceptionally High Detonation Speed

   • I. Kwiecien
   • P. Bobrowski
   • J. Wojewoda-Budka

   OriginalPaper Open access 23 September 2020 Pages: 6286 - 6294

   

6. Bending Properties and Failure Mechanism of Continuous W-Core-SiC Fiber-Reinforced 2024 and 6061 Aluminum Matrix Composites

   • Desheng Chu
   • Yue Ma
   • Pengjun Tang

   OriginalPaper 25 September 2020 Pages: 6295 - 6306

   

7. Manufacturing and Mechanical Characterization of Fly-Ash-Reinforced Materials for Furnace Lining Applications

   • M. S. V. Ravi Kishor
   • Ajit Behera
   • Pruncu I. Catalin

   OriginalPaper 21 September 2020 Pages: 6307 - 6321

   

8. Comparison between Explosive Welding and Roll-Bonding Processes of AA1050/Mg AZ31B Bilayer Composite Sheets Considering Microstructure and Mechanical Properties

   • A. Rouzbeh
   • M. Sedighi
   • R. Hashemi

   OriginalPaper 23 September 2020 Pages: 6322 - 6332

   

9. Investigation on Wear Characteristics of TiBFe Composites Containing 10 at.% Boron and 10-30 at.% Iron

   • Ashwani Ranjan
   • Rajnesh Tyagi
   • K. S. R. Chandran

   OriginalPaper 23 September 2020 Pages: 6333 - 6342

   

10. Effect of Hot Deformation Parameters on Grain Refinement of an As-Cast Ni-Based Superalloy

    • Xinxu Li
    • Zhouhua Jiang
    • Zhao Li

    OriginalPaper 22 September 2020 Pages: 6343 - 6354

    

11. Development of High Corrosion- and Wear-Resistant Al-Si Alloy Coating on AZ80 Mg Alloy by Hot Extrusion

    • Toko Tokunaga
    • Kazushi Sotomoto
    • Kiyotaka Matsuura

    OriginalPaper 29 September 2020 Pages: 6355 - 6362

    

12. Compositionally Modulated Multilayered Zn-Co Deposits for Better Corrosion Resistance

    • Ramesh S. Bhat
    • K. Venkatakrishna
    • A. Chitharanjan Hegde

    OriginalPaper 24 September 2020 Pages: 6363 - 6371

    

13. Microstructural Analysis of Cavity Formed in Advanced High-Strength Steel Resistance Spot Welds

    • Vijeesh Vijayan
    • Sivaprasad Murugan
    • Yeong-Do Park

    OriginalPaper 24 September 2020 Pages: 6372 - 6377

    

14. Mechanical and Metallurgical Studies on Thixoextruded Al-Si Alloys

    • Abeyram M. Nithin
    • M. J. Davidson
    • C. S. P. Rao

    OriginalPaper 29 September 2020 Pages: 6378 - 6389

    

15. Effect of CeO₂ on the Microstructure and Properties of Plasma-Sprayed Al₂O₃-ZrO₂ Ceramic Coatings

    • Yan-wei Wang
    • Xiao-long Wang
    • Yan-chun Dong

    OriginalPaper 28 September 2020 Pages: 6390 - 6401

    

16. Failure of Printed Circuit Boards during Storage and Service: Leaked Capacitors and White Residue

    • A. Ravi Shankar
    • K. Praveen
    • John Philip

    OriginalPaper 28 September 2020 Pages: 6402 - 6411

    

17. High-Temperature Oxidation Resistance of CrMoN Films

    • Yuxing Wang
    • Yujiao Tang
    • Xia Zhang

    OriginalPaper 30 September 2020 Pages: 6412 - 6416

    

18. Corrosion Behaviors of Carbon Steel and Ni-Advanced Weathering Steel Exposed to Tropical Marine Atmosphere

    • Yueming Fan
    • Wei Liu
    • Xiaogang Li

    OriginalPaper 09 October 2020 Pages: 6417 - 6426

    

19. High-Speed Impact Behavior and Microstructure Evolution of an Extruded Mg-7Sn-5Zn-3Al Alloy

    • Guangli Bi
    • Zuocheng Xu
    • Xiangdong Ding

    OriginalPaper 07 October 2020 Pages: 6427 - 6438

    

20. Formation and Elimination Mechanism of Lack of Fusion and Cracks in Direct Laser Deposition 24CrNiMoY Alloy Steel

    • Qian Guo
    • Suiyuan Chen
    • Mei Wang

    OriginalPaper 06 October 2020 Pages: 6439 - 6454

    

21. Production and Characterization of a Bone-Like Porous Ti/Ti-Hydroxyapatite Functionally Graded Material

    • Eren Yılmaz
    • Feyza Kabataş
    • Fehim Fındık

    OriginalPaper 14 October 2020 Pages: 6455 - 6467

    

22. Effect of Heat Treatment Process on Microstructure and Crystallography of 20CrMnTiH Spur Bevel Gear

    • Xuan Hu
    • Lin Hua
    • Wuhao Zhuang

    OriginalPaper 06 October 2020 Pages: 6468 - 6483

    

23. Preparation and Properties of Zn-Cu Alloy for Potential Stent Material

    • Jiajun Huang
    • Yonglai Lai
    • David J. Ross

    OriginalPaper 06 October 2020 Pages: 6484 - 6493

    

24. The Initial Precipitation Behavior of Copper in Ferritic Stainless Steel

    • Hongxiang Yin
    • Yi Wu
    • Aimin Zhao

    OriginalPaper 08 October 2020 Pages: 6494 - 6502

    

25. High-Temperature Oxidation Behavior of Al-Modified Boronized Coating Prepared on Ti-6Al-4V by Thermal Diffusion

    • Yangguang Liu
    • Xiaojing Xu
    • Chen Li

    OriginalPaper 06 October 2020 Pages: 6503 - 6512

    

26. On the Microstructural and Mechanical Behavior of a Fe-0.3C-2.3Mn-0.22Si-0.5Cr-0.13Ti-0.005B Steel Intended for Automotive Applications

    • A. Duran-Nuñez
    • A. L. Ramirez-Ledesma
    • J. A. Juarez-Islas

    OriginalPaper 09 October 2020 Pages: 6513 - 6519

    

27. Evaluation of Corrosion Susceptibility of Conventional Dual-Phase Steels Used in the Automotive Industry

    • R. Vences-Hernández
    • F. Reyes-Calderón
    • J. A. Salazar-Torres

    OriginalPaper 13 October 2020 Pages: 6520 - 6534

    

28. Electrochemical Behavior of Cobalt Oxide/Boron-Incorporated Reduced Graphene Oxide Nanocomposite Electrode for Supercapacitor Applications

    • R. Naresh Muthu
    • Sankara Sarma V. Tatiparti

    OriginalPaper 13 October 2020 Pages: 6535 - 6549

    

29. Thermophysical-Based Modeling of Material Removal in Powder Mixed Near-Dry Electric Discharge Machining

    • Sanjay Sundriyal
    • Jitender Yadav
    • Rajesh Kumar

    OriginalPaper 18 September 2020 Pages: 6550 - 6569

    

30. Numerical Investigation on Molten Pool Dynamics and Defect Formation in Electron Beam Welding of Aluminum Alloy

    • Ziyou Yang
    • Yuchao Fang
    • Jingshan He

    OriginalPaper 16 September 2020 Pages: 6570 - 6580

    

31. Study of Influence of Superimposed Hydrostatic Pressure on Ductility in Ring Compression Test

    • Amir Partovi
    • M. M. Shahzamanian
    • P. D. Wu

    OriginalPaper 17 September 2020 Pages: 6581 - 6590

    

32. Physical Model Based on Data-Driven Analysis of Chemical Composition Effects of Friction Stir Welding

    • J. Y. Li
    • X. X. Yao
    • Z. Zhang

    OriginalPaper 23 September 2020 Pages: 6591 - 6604

    

33. Machine Learning Decomposition Onset Temperature of Lubricant Additives

    • Yun Zhang
    • Xiaojie Xu

    OriginalPaper 13 October 2020 Pages: 6605 - 6616

    

34. Effect of Void on Yielding Behaviors in a Bicrystalline Copper

    • Lin Yuan
    • Chuanlong Xu
    • Bin Guo

    OriginalPaper 06 October 2020 Pages: 6617 - 6630

    

35. Effect of Fly Ash with Different Particle Size Distributions on the Properties and Microstructure of Concrete

    • Yunpeng Cui
    • Jun Liu
    • Bo Pang

    OriginalPaper 15 September 2020 Pages: 6631 - 6639

    

36. Mechanical Performance of Zr-Containing 354-Type Al-Si-Cu-Mg Cast Alloy: Role of Geometrical Discontinuities

    • M. H. Abdelaziz
    • E. A. Elsharkawi
    • F. H. Samuel

    OriginalPaper 16 September 2020 Pages: 6640 - 6651

    

37. Investigation of Polyethylene Pipeline Behavior after 30 Years of Use in Gas Distribution Network

    • Taous Bachir-Bey
    • Naima Belhaneche-Bensemra

    OriginalPaper 15 September 2020 Pages: 6652 - 6660

    

38. Fatigue Behavior of 300 M Steel Coated with Water-Based Aluminum Phosphate Coating

    • Feng Ding
    • Xiaohu Chen
    • Kai Yang

    OriginalPaper 18 September 2020 Pages: 6661 - 6669

    

39. Tribological Properties of In Situ-Fabricated NiCr-Al₂O₃ Composites with SrAl₄O₇ and SrO at Elevated Temperatures

    • Feng Liu
    • Jingshu Ren
    • Weifeng Cao

    OriginalPaper 24 September 2020 Pages: 6670 - 6680

    

40. Experimental Study on the Fatigue Crack Growth and Overload Effect in Medium Density Polyethylene

    • Yang-fan Qian
    • Feng-peng Yang
    • He-yang Du

    OriginalPaper 28 September 2020 Pages: 6681 - 6690

    

41. Effect of Micro-alloying and Microstructure on the Corrosion Behavior of As-Cast Mg-6.2 wt.% Zn Alloy

    • Monalisa Mandal
    • K. Mondal

    OriginalPaper 23 September 2020 Pages: 6691 - 6700

    

42. Fatigue Performance and Strength Assessment of AA2024 Alloy Friction Stir Lap Welds

    • Ruijie Wang
    • Hong-Tae Kang
    • Xinghai Lei

    OriginalPaper 30 September 2020 Pages: 6701 - 6713

    

43. Influence of Nd on Hot Tearing Susceptibility and Mechanism of Mg-Zn-Y-Zr Alloys

    • Xingxing Li
    • Shimeng Liu
    • Feng Wang

    OriginalPaper 06 October 2020 Pages: 6714 - 6726

    

44. Dynamic Mechanical Behavior and Constitutive Models of S890 High-Strength Steel at Intermediate and High Strain Rates

    • Yong Zhu
    • Hua Yang
    • Sumei Zhang

    OriginalPaper 30 September 2020 Pages: 6727 - 6739

    

45. Deposition of MoS₂-TiN Multilayer Films on 1045 Steel to Improve Common Rail Injection System

    • L. C. Silva
    • M. S. Libório
    • S. M. Alves

    OriginalPaper 06 October 2020 Pages: 6740 - 6747

    

46. Influence of Tempering in Different Melting Routes on Toughness Behavior of AISI 4340 Steel

    • M. Manokaran
    • Abhishek S. Kashinath
    • Rajkumar P. Singh

    OriginalPaper 13 October 2020 Pages: 6748 - 6760

    

47. Study of Surface Properties in Laser Surface Alloying of Al_xCu_0.5FeNiTi High-Entropy Alloy

    • Anas Ahmad Siddiqui
    • Avanish Kumar Dubey

    OriginalPaper 14 October 2020 Pages: 6761 - 6773

    

48. Microstructure Evolution and Mechanical Properties of AQ80 Alloy During Forward Extrusion and Twist Deformation

    • Xiaoye Liu
    • Liwei Lu
    • Yong Xue

    OriginalPaper 15 September 2020 Pages: 6774 - 6783

    

49. The Effect of Post-weld Heat Treatment on the Corrosion Behavior of Different Weld Zones of Titanium Ti-6Al-4V Alloy by Friction Stir Welding

    • Alireza Nasresfahani
    • Abdol Reza Soltanipur
    • Ali Ghasemi

    OriginalPaper 16 September 2020 Pages: 6784 - 6789

    

50. Effects of Preheating and Cooling Rate on the Microstructure and Mechanical Properties of Tungsten Inert Gas Welded Joints of AA5083-H321 Aluminum Alloy

    • P. Shahsavari
    • H. R. Rezaei Ashtiani

    OriginalPaper 15 September 2020 Pages: 6790 - 6801