1. A review of G code, STEP, STEP-NC, and open architecture control technologies based embedded CNC systems

   • Kamran Latif
   • Anbia Adam
   • Aini Zuhra Abdul Kadir

   Critical Review 17 April 2021 Pages: 2549 - 2566

   

2. Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels

   • Cemal İrfan Çalışkan
   • Gökhan Özer
   • Ebubekir Koç

   ORIGINAL ARTICLE 11 April 2021 Pages: 2567 - 2575

   

3. Automatic calibration of work coordinates for robotic wire and arc additive re-manufacturing with a single camera

   • Qiang Wu
   • Xunpeng Qin
   • Zeqi Hu

   ORIGINAL ARTICLE 12 April 2021 Pages: 2577 - 2589

   

4. Artificial neural network for modeling and investigating the effects of forming tool characteristics on the accuracy and formability of thin aluminum alloy blanks when using SPIF

   • Sherwan Mohammed Najm
   • Imre Paniti

   ORIGINAL ARTICLE Open access 12 April 2021 Pages: 2591 - 2615

   

5. Effect of temperature on the deep drawing forming performance of Ti/Al laminates: experimental investigation and finite element analysis

   • Hantao Kou
   • Liang Qin
   • Jie Tao

   ORIGINAL ARTICLE 12 April 2021 Pages: 2617 - 2632

   

6. Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing

   • Sergey Borisovich Sidelnikov
   • Denis Sergeevich Voroshilov
   • Marina Vladimirovna Voroshilova

   ORIGINAL ARTICLE 12 April 2021 Pages: 2633 - 2649

   

7. Heterogeneous sensors-based feature optimisation and deep learning for tool wear prediction

   • Xiaoyang Zhang
   • Sheng Wang
   • Xin Lu

   ORIGINAL ARTICLE 12 April 2021 Pages: 2651 - 2675

   

8. Study on surface characteristics in ultrasonic vibration-assisted WEDM-LS based on spatial vibration of electrode wire

   • Yan Wang
   • Cheng-Zhen Wu
   • Jie Yang

   ORIGINAL ARTICLE 12 April 2021 Pages: 2677 - 2695

   

9. Effects of cooling channel layout on the cooling performance of rapid injection mold

   • Chil-Chyuan Kuo
   • Zi-Fan Jiang
   • Wei-Cheng Zhong

   ORIGINAL ARTICLE 13 April 2021 Pages: 2697 - 2710

   

10. Extraction of tool wear indicators in peck-drilling of Inconel 718

    • Amaia Jiménez
    • Miguel Arizmendi
    • José Manuel Sánchez

    ORIGINAL ARTICLE 13 April 2021 Pages: 2711 - 2720

    

11. Simulation analysis of cutting process for Inconel718 nickel-based superalloy

    • Xueguang Li
    • Yahui Wang
    • Liqin Miao

    ORIGINAL ARTICLE 13 April 2021 Pages: 2721 - 2738

    

12. Effects of threaded pin profile on torque, power, and energy by modeling and experimental analysis

    • Karen J. Quintana
    • Jose Luis L. Silveira

    ORIGINAL ARTICLE 13 April 2021 Pages: 2739 - 2751

    

13. Kinematic modeling of surface topography ground by an electroplated diamond wheel

    • Changsheng Li
    • Liangchi Zhang
    • Zhuangde Jiang

    ORIGINAL ARTICLE 14 April 2021 Pages: 2753 - 2765

    

14. Sustainability and tool wear of titanium alloy thread cutting in dry and cryogenic conditions

    • Anna Zawada-Tomkiewicz
    • Łukasz Żurawski
    • Filip Szafraniec

    ORIGINAL ARTICLE Open access 15 April 2021 Pages: 2767 - 2781

    

15. Grinding characteristics of CVD diamond grits in single grit grinding of SiC ceramics

    • Xiaotian Shen
    • Xin Song
    • Fanghong Sun

    ORIGINAL ARTICLE 15 April 2021 Pages: 2783 - 2797

    

16. Analytical modeling and experimental study of laser powder-fed additive manufacturing on curved substrates

    • Lijuan Zhao
    • Haitao Yue
    • Jianzhuo Zhang

    ORIGINAL ARTICLE 15 April 2021 Pages: 2799 - 2809

    

17. Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method

    • Mehmet Akif Erden
    • Nafiz Yaşar
    • Mozammel Mia

    ORIGINAL ARTICLE Open access 15 April 2021 Pages: 2811 - 2827

    

18. Modelling and analysis of abrasive water jet cutting front profile

    • Shu Wang
    • Fengling Yang
    • Peng Lin

    ORIGINAL ARTICLE 15 April 2021 Pages: 2829 - 2837

    

19. Tribological viewpoint of the cutting force in rotary ultrasonic vibration-assisted side milling (RUVSM)

    • Yi-Jia Sun
    • Hu Gong
    • Hao Ni

    ORIGINAL ARTICLE 15 April 2021 Pages: 2839 - 2848

    

20. Feature extraction of milling chatter based on optimized variational mode decomposition and multi-scale permutation entropy

    • Xianli Liu
    • Zhixue Wang
    • Lihui Wang

    ORIGINAL ARTICLE 17 April 2021 Pages: 2849 - 2862

    

21. Investigation of the laser cleaning process for IBS grids in optical coating technology

    • Alexandr Belosludtsev
    • Ignas Bitinaitis
    • Aleksej M. Rodin

    ORIGINAL ARTICLE 17 April 2021 Pages: 2863 - 2869

    

22. Energy-efficient buffer allocation problem in unreliable production lines

    • Yasmine Alaouchiche
    • Yassine Ouazene
    • Farouk Yalaoui

    ORIGINAL ARTICLE 18 April 2021 Pages: 2871 - 2885

    

23. Development and characterization of green automotive brake pads from waste shells of giant African snail (Achatina achatina L.)

    • Chinwuba Victor Ossia
    • Akuro Big-Alabo

    ORIGINAL ARTICLE 18 April 2021 Pages: 2887 - 2897

    

24. Precision grinding of cemented carbides based on a multi-layer brazed diamond wheel using an electrolyte containing carbon nanotubes

    • Qiaoping Wu
    • Boxin Li
    • Linlin Wan

    ORIGINAL ARTICLE 18 April 2021 Pages: 2899 - 2909

    

25. Cutting edge wear in high-speed stainless steel end milling

    • Mohammad Malekan
    • Camilla D. Bloch-Jensen
    • Ramin Aghababaei

    ORIGINAL ARTICLE 19 April 2021 Pages: 2911 - 2928

    

26. Advanced model-based controller for cyber-physical shot peening process

    • Van Bo Nguyen
    • Augustine Teo
    • Chang Wei Kang

    ORIGINAL ARTICLE 19 April 2021 Pages: 2929 - 2943

    

27. Robotic skeleton arc additive manufacturing of aluminium alloy

    • Bintao Wu
    • Zengxi Pan
    • Edward Pierson

    ORIGINAL ARTICLE 19 April 2021 Pages: 2945 - 2959

    

28. Load prediction on metal forming process (tube sinking) using finite element method

    • Akinola Ogbeyemi
    • Ikechukwu Okoh
    • John Akpobi

    ORIGINAL ARTICLE 19 April 2021 Pages: 2961 - 2973

    

29. Surface roughness analysis of medical grade titanium sheets formed by single point incremental forming

    • Shakir Gatea
    • Hengan Ou

    ORIGINAL ARTICLE 19 April 2021 Pages: 2975 - 2990

    

30. A rigid-flexible coupling pretravel error model for a touch-trigger probe in an on-machine inspection system

    • Simi Li
    • Pingfa Feng
    • Shaoqiu Zhang

    ORIGINAL ARTICLE 19 April 2021 Pages: 2991 - 3003

    

31. Classification and variation of fracture modes in laser shock hole-clinching

    • Chao Zheng
    • Shushuai Liu
    • Zhong Ji

    ORIGINAL ARTICLE 19 April 2021 Pages: 3005 - 3020

    

32. Simulated and experimental analysis of laser beam energy profiles to improve efficiency in wire-fed laser deposition

    • Nicholas Goffin
    • John R. Tyrer
    • Rebecca L. Higginson

    ORIGINAL ARTICLE Open access 20 April 2021 Pages: 3021 - 3036

    

33. Theoretical and experimental investigations of mechanical vibrations of hot hammer forging

    • Saeid Saberi
    • Jochen Fischer
    • Reza Afsharnia

    ORIGINAL ARTICLE Open access 20 April 2021 Pages: 3037 - 3045

    

34. Multi-spindle drilling of Al2024 alloy and the effect of TiAlN and TiSiN-coated carbide drills for productivity improvement

    • Muhammad Aamir
    • Majid Tolouei-Rad
    • Khaled Giasin

    ORIGINAL ARTICLE 20 April 2021 Pages: 3047 - 3056

    

35. The effect of printing parameters on sintered properties of extrusion-based additively manufactured stainless steel 316L parts

    • Waqar Hassan
    • Muhammad Asad Farid
    • Matteo Strano

    ORIGINAL ARTICLE 20 April 2021 Pages: 3057 - 3067

    

36. Geometrical optimization of centerless grinding process by profiled workrest

    • Marco Leonesio
    • Jeremi Wojcicki
    • Giacomo Bianchi

    ORIGINAL ARTICLE 20 April 2021 Pages: 3069 - 3075

    

37. Diagnostic and severity analysis of combined failures composed by imbalance and misalignment in rotating machines

    • Dionísio Henrique Carvalho de Sá Só Martins
    • Denys Pestana Viana
    • Diego Barreto Haddad

    ORIGINAL ARTICLE 21 April 2021 Pages: 3077 - 3092

    

38. Design and experimental study of longitudinal-torsional ultrasonic transducer with helical slots considering the stiffness variation

    • Hongbo Li
    • Tao Chen
    • Junpeng Ye

    ORIGINAL ARTICLE 21 April 2021 Pages: 3093 - 3107

    

39. A Motion State-based Printing Time Modeling and Printing Cost Analysis for Laser Direct Deposition Process

    • Haiying Wei
    • Keke Deng
    • Wen Liu

    ORIGINAL ARTICLE 21 April 2021 Pages: 3109 - 3121

    

40. Optimization of laser beam welding of steel parts made by additive manufacturing

    • Fabrizia Caiazzo
    • Vittorio Alfieri

    ORIGINAL ARTICLE Open access 21 April 2021 Pages: 3123 - 3136

    

41. Numerical modelling and experimental study on pulsed laser surface texturing on cemented carbides

    • Yu Liu
    • Xin Liu
    • Yuan Tian

    ORIGINAL ARTICLE 21 April 2021 Pages: 3137 - 3145

    

42. Improving AR-powered remote assistance: a new approach aimed to foster operator’s autonomy and optimize the use of skilled resources

    • Davide Calandra
    • Alberto Cannavò
    • Fabrizio Lamberti

    ORIGINAL ARTICLE Open access 21 April 2021 Pages: 3147 - 3164

    

43. Geometric influence of the laser-based powder bed fusion process in Ti6AL4V and AlSi10Mg

    • Zhong Yang Chua
    • Seung Ki Moon
    • II Hyuk Ahn

    ORIGINAL ARTICLE 21 April 2021 Pages: 3165 - 3176

    

44. Predicting magnetic characteristics of additive manufactured soft magnetic composites by machine learning

    • Tsung-Wei Chang
    • Kai-Wei Liao
    • Chung-Wei Cheng

    Application 12 April 2021 Pages: 3177 - 3184