Articles

1. Printed Electronics by Plasma Spraying: Case Study for High Temperature Sensors

   • Florin D. Duminica
   • Muthu Karuppasamy
   • Philippe Guaino

   ORIGINAL RESEARCH ARTICLE Open access 25 April 2024

   

2. Comparison of Microwave Versus Conventional Furnace Heat Treatments of Carbide Composite Thermal Spray Coatings

   • Steven Matthews
   • Fei Yang

   ORIGINAL RESEARCH ARTICLE Open access 25 April 2024

   

3. Evaluation of Tribological Characteristics of Atmospheric Plasma Spray Deposited Ni-Based Coatings

   • Rohit Kumar Singh Gautam
   • Vivek Mani Tripathi
   • Hemant Nautiyal

   ORIGINAL RESEARCH ARTICLE 23 April 2024

   

4. Fabrication of Tremella-Like Zn-Based Composite Coating with Improved Photocatalytic Degradation Performance and Robust Superhydrophobicity

   • Lu-lu Zhang
   • Wen-chao Ma
   • Hong-tao Liu

   ORIGINAL RESEARCH ARTICLE 22 April 2024

   

5. CFD Investigation of a Co-Flow Nozzle for Cold Spray Additive Manufacturing Applications

   • Amit Kumar Sharma
   • Ashish Vashishtha
   • Ramesh Raghavendra

   ORIGINAL RESEARCH ARTICLE Open access 22 April 2024

   

6. Jetting Phenomenon in Cold Spray: A Critical Review on Finite Element Simulations

   • S. Rahmati
   • J. Mostaghimi
   • A. Dolatabadi

   REVIEW 15 April 2024

   

7. Investigation on the Oxidation Behavior of the NiCrAlY Bond-Coat with Low Al Content Sprayed by High Velocity Oxygen Fuel Method

   • Yuqi Xie
   • Junkai Liu
   • Yichun Zhou

   ORIGINAL RESEARCH ARTICLE 11 April 2024

   

8. Correction to: Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells

   • Mengting Zhang
   • Chen Song
   • Kesong Zhou

   Correction 10 April 2024

   

9. Analysis of Data Generation and Preparation for Porosity Prediction in Cold Spray using Machine Learning

   • Martin Eberle
   • Samuel Pinches
   • Andrew Ang

   ORIGINAL RESEARCH ARTICLE Open access 10 April 2024

   

10. Effect of Gd₂O₃ Addition on High-Temperature Oxidation Performance of NiCoCrAlYTa Coatings

    • Anying Liu
    • Xiufang Cui
    • Guo Jin

    ORIGINAL RESEARCH ARTICLE 01 April 2024

    

11. High Velocity Air Fuel Spraying for Metal Additive Manufacturing - A Study on Copper

    • M. P. Sreerag
    • V. Abhijith Vijay
    • B. Rajasekaran

    ORIGINAL RESEARCH ARTICLE 28 March 2024

    

12. Multipurpose Additives Toward Improving the Polymer Cold Spray Process

    • Tristan W. Bacha
    • Francis M. Haas
    • Joseph F. Stanzione III

    ORIGINAL RESEARCH ARTICLE Open access 27 March 2024 Pages: 609 - 618

    

13. Comparative Analysis of Microstructural and Mechanical Attributes in Low-Pressure Cold-Spray Coatings: Impact of Varied Cu Feedstock Powders

    • Niloofar Eftekhari
    • Hamid Jahed

    ORIGINAL RESEARCH ARTICLE 26 March 2024 Pages: 629 - 651

    

14. Fabrication and Corrosion Resistance of Al-Co-Ce Amorphous Alloy Coating by a Combined Process of Thermal Spraying and Pulsed Electron Beam Surface Remelting

    • Chunling Li
    • Huang Chen
    • Songqing Hu

    ORIGINAL RESEARCH ARTICLE 26 March 2024

    

15. A Comparative Study on Wear Resistance of Cold-Sprayed Aluminum/Quasicrystal Composite Coatings

    • Reza Jafari
    • Jan Cizek
    • Heli Koivuluoto

    ORIGINAL RESEARCH ARTICLE Open access 25 March 2024 Pages: 705 - 718

    

16. Cold Sprayed Deposits Characterized by Positron Annihilation Spectroscopy

    • Jan Cizek
    • Jan Medricky
    • Jakub Cizek

    ORIGINAL RESEARCH ARTICLE 25 March 2024 Pages: 666 - 675

    

17. Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells

    • Mengting Zhang
    • Chen Song
    • Kesong Zhou

    ORIGINAL RESEARCH ARTICLE 21 March 2024

    

18. Enhancing Mechanical Behavior Assessment in Porous Thermal Barrier Coatings using a Machine Learning Fine-Tuned with Genetic Algorithm

    • Ahmed A. H. Alkurdi
    • Hani K. Al-Mohair
    • Atheer Y. Oudah

    ORIGINAL RESEARCH ARTICLE 21 March 2024

    

19. A Three-Dimensional Damaged Region Contour Extraction Approach for Cold Spray Repair

    • Fei Huang
    • Wenbo Li
    • Sihao Deng

    ORIGINAL RESEARCH ARTICLE 21 March 2024

    

20. Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2023

    ANNOUNCEMENT 20 March 2024

21. SiC-YAG Coating Microstructure Optimization Through Powder Feedstock Manufacturing Process Control

    • D. Perello-Badia
    • N. Espallargas

    ORIGINAL RESEARCH ARTICLE Open access 19 March 2024

    

22. Mixed-Material Feedstocks for Cold Spray Additive Manufacturing of Metal–Polymer Composites

    • Matthew S. Schwenger
    • Madison S. Kaminskyj
    • Joseph F. Stanzione III

    ORIGINAL RESEARCH ARTICLE Open access 15 March 2024 Pages: 619 - 628

    

23. Special Issue Featuring Papers from the International Thermal Spray Conference (ITSC) 2023

    GUEST EDITORIAL 15 March 2024 Pages: 427 - 429

    

24. Effect of Substrate Preheating on Cracking and Wear Resistance of Laser-Cladded Tribaloy T-800 Coatings on DD5 Single-Crystal Alloy

    • Zhang Guangtai
    • Liu Weijun
    • Xu Xiaowen

    ORIGINAL RESEARCH ARTICLE 07 March 2024

    

25. High Entropy Oxides as Promising Materials for Thermal Barrier Topcoats: A Review

    • Hamideh Vakilifard
    • Hossein Shahbazi
    • Christian Moreau

    REVIEW 04 March 2024 Pages: 447 - 470

    

26. Microstructure, Mechanical, and Corrosion Properties of 304 Stainless Steel-H13 Tool Steel Composite Cold Spray Coatings

    • Kole C. Vollmer
    • Kyle Johnson
    • Bharat K. Jasthi

    ORIGINAL RESEARCH ARTICLE 04 March 2024

    

27. Copper Coatings for Antibiotics Reduction in Fattening Livestock

    • Lukas Möhrke
    • Michél Hauer
    • Knuth-Michael Henkel

    ORIGINAL RESEARCH ARTICLE Open access 28 February 2024 Pages: 771 - 785

    

28. Quantitative Nondestructive Evaluation of Cold Spray Manufactured Aluminum Alloy 6061 and Copper Samples

    • Kishore Kumar Indu Kumar
    • Mann Baijukumar Patel
    • Ozan Ç. Özdemir

    ORIGINAL RESEARCH ARTICLE Open access 28 February 2024 Pages: 688 - 704

    

29. Promoting JTST with a “Smile!” at IMAT 2023

    ANNOUNCEMENT 28 February 2024

    

30. Scratch Adhesion Testing of Thick HVOF Thermal Sprayed Coatings

    • Maya M. Harfouche
    • Sima A. Alidokht
    • Mary E. Makowiec

    ORIGINAL RESEARCH ARTICLE 28 February 2024

    

31. Prediction of Geometry-Induced Porosity in Cold Spray Additive Manufacturing of Leading Edges

    • Isaac M. Nault
    • Marius Ellingsen
    • Aaron Nardi

    ORIGINAL RESEARCH ARTICLE 28 February 2024

    

32. The Study on Flow Field Simulation and WC-12Co Multi-layer Coating Growth in High-Velocity Oxygen-Fuel (HVOF) Thermal Spraying

    • Chang Li
    • Siyu Li
    • Xing Han

    ORIGINAL RESEARCH ARTICLE 28 February 2024

    

33. Microstructure and High-Temperature Tribological Properties of Nickel-Based Composite Coatings with Laser In Situ Induced TiC and MoSi₂ Reinforcement

    • Silong Cao
    • Pu Zhang
    • Jiansong Zhou

    ORIGINAL RESEARCH ARTICLE 28 February 2024

    

34. Effect of Interfacial Structure on Microstructure and Properties of Cold-Sprayed Cu-Al₂O₃ Composite Coating

    • Peiyuan Lv
    • Min Yu
    • Hui Chen

    ORIGINAL RESEARCH ARTICLE 27 February 2024

    

35. Announcing the Journal of Thermal Spray Technology 2023 Editor’s Choice Selections

    EDITORIAL 26 February 2024 Pages: 1 - 2

    

36. Microstructure and Properties of AlCoCrFeNi_2.1 Eutectic High-Entropy Alloy Coatings Fabricated by Extreme High-Speed and Conventional Laser Cladding

    • Jia Wang
    • Yang Li
    • Zichuan Lu

    ORIGINAL RESEARCH ARTICLE 23 February 2024

    

37. Microstructural Feature Extraction by a Convolutional Neural Network for Cold Spray of Aluminum Alloys

    • Siyu Tu
    • Phuong Vo

    ORIGINAL RESEARCH ARTICLE Open access 22 February 2024 Pages: 540 - 550

    

38. Microstructure and Thermal Property Evolution of Plasma-Sprayed Lu₂SiO₅ EBCs Under High Temperature Environments

    • Xin Zhong
    • Ruihui Liang
    • Xuebin Zheng

    ORIGINAL RESEARCH ARTICLE 22 February 2024

    

39. Highly Sensitive LaFeO₃ Coatings Deposited by Solution Precursor Plasma Spraying for Isoamyl Alcohol Detection

    • Kaichun Xu
    • Mengjie Han
    • Chao Zhang

    ORIGINAL RESEARCH ARTICLE 22 February 2024

    

40. Correction to: A Path Planning Method for Polishing Thermal Barrier Coatings on the Surface of Aero-Engine Blades Based on Point Cloud Slicing

    • Wei Han Zhang
    • Zhen Hua Cai
    • Zhen Hua Ma

    Correction 21 February 2024

41. Plasma-Sprayed Nanodiamond-Reinforced NiCrBSi Composite Coating for Improved Wear and Corrosion Resistance

    • Abhishek Kumar Grain
    • O. S. Asiq Rahman
    • Anup Kumar Keshri

    ORIGINAL RESEARCH ARTICLE 12 February 2024

    

42. Numerical and Experimental Analysis of a Solid Shroud in Multi-arc Plasma Spraying

    • K. Bobzin
    • H. Heinemann
    • A. Dokhanchi

    ORIGINAL RESEARCH ARTICLE Open access 12 February 2024

    

43. Data-Driven Overlapping-Track Profile Modeling in Cold Spray Additive Manufacturing

    • Daiki Ikeuchi
    • Alejandro Vargas-Uscategui
    • Peter C. King

    ORIGINAL RESEARCH ARTICLE Open access 09 February 2024 Pages: 530 - 539

    

44. Effect of Carbon Fiber Orientation when Cold Spraying Metallic Powders onto Carbon Fiber-Reinforced Polymers

    • Andre C. Liberati
    • Payank Patel
    • Pantcho Stoyanov

    ORIGINAL RESEARCH ARTICLE 07 February 2024 Pages: 596 - 608

    

45. Correction to: Development of Single-Stage TiNbMoMnFe High-Entropy Alloy Coating on 304L Stainless Steel Using HVOF Thermal Spray

    • N. V. Abhijith
    • Deepak Kumar
    • Dinesh Kalyansundaram

    Correction 07 February 2024

46. Numerical and Experimental Investigation for Application of CoNiCrAlY Coatings by HVAF

    • K. Bobzin
    • H. Heinemann
    • K. Jasutyn

    ORIGINAL RESEARCH ARTICLE Open access 07 February 2024

    

47. Fretting Behavior of WC-Co-Cr Coatings Against QT Steel in Bolted Joint

    • Vilma Haaja
    • Tommi Varis
    • Matti Isakov

    ORIGINAL RESEARCH ARTICLE Open access 07 February 2024

    

48. 45S5/PEEK Coatings by Cold Gas Spray with In Vitro Bioactivity, Degradation, and Cellular Proliferation

    • Beatriz Garrido
    • Vicente Albaladejo-Fuentes
    • Irene Garcia-Cano

    ORIGINAL RESEARCH ARTICLE Open access 07 February 2024

    

49. Encapsulated Liquid Lubricants Incorporated in Metal Matrix Thermal Spraying Coatings

    • Ch. I. Sarafoglou
    • D. Skaltsas
    • I. Georgiopoulos

    ORIGINAL RESEARCH ARTICLE 06 February 2024 Pages: 786 - 805

    

50. Polymer Metallization by Cold Spray Deposition of Polyamide-Copper Composite Coatings

    • Maniya Aghasibeig
    • Abdelkader Benhalima
    • Kintak Raymond Yu

    ORIGINAL RESEARCH ARTICLE Open access 06 February 2024