1. From the Editor

   • Thomas Prucha

   Editorial 03 July 2023 Pages: 1449 - 1450

   

2. Effect of Micro-structural Dispersity of SiMo Ductile Iron on Thermal Cycling Performance

   • Simon N. Lekakh
   • Viraj A. Athavale
   • Mei Li

   Technical Paper 02 December 2022 Pages: 1451 - 1466

   

3. Inhomogeneous Pearlite and Ferrite in Ductile Iron Sand Castings

   • R. N. Lumley

   Technical Paper 21 September 2022 Pages: 1467 - 1492

   

4. Density change upon solidification of silicon cast irons

   • Jacques Lacaze
   • Jon Sertucha
   • Urko de la Torre

   Technical Paper 03 October 2022 Pages: 1493 - 1506

   

5. Implementation and Validation of Casting Simulation Methodology for Diagnostics of Lamellar Graphite Iron

   • Björn Domeij
   • Ilja Belov
   • Attila Dioszegi

   Technical Paper Open access 08 October 2022 Pages: 1507 - 1517

   

6. An Overview on the Identification and Characterization of Cu-Rich Second Phases in Casting Al Alloys

   • T. E. Soto
   • I. Alfonso
   • F. H. Samuel

   Technical Update 10 October 2022 Pages: 1518 - 1534

   

7. Development of Cast Hypereutectic Al-Si-X Alloys with Ultrafine–Si Phase Part 1: As-cast Structure Development

   • P. Guba
   • J. Sokolowski
   • M. Kasprzak

   Technical Paper 16 October 2022 Pages: 1535 - 1557

   

8. New Approach to Develop Ductile Cast Iron Digital Grade for Automotive Components

   • A. I. Fernández-Calvo
   • J. Garay
   • R. Suárez

   Technical Paper 24 December 2022 Pages: 1558 - 1568

   

9. Investigation of Mechanical Characterization, Thermal Behavior and Dielectric Properties on Al7075-TiB₂ MMC Fabricated Using Stir Casting Route

   • M. Thirumal Azhagan
   • M. Manoj
   • V. Mugendiran

   Technical Paper 19 September 2022 Pages: 1569 - 1579

   

10. The Effects of Individual Addition of Sn, Nd, and Ca on the Microstructure, Mechanical Properties, and Corrosion Behavior of the Mg–Li–Al Alloy

    • Sehzat Acikgoz
    • S. Can Kurnaz

    Technical Paper 19 September 2022 Pages: 1580 - 1595

    

11. Improved Mechanical Properties of Mg-1.5Sn (at.%) Alloy Due to the Synergistic Effects of a Second Phase and Incorporation of Additional Elements Through Solid-Solution Treatment

    • Wandong Li
    • Pengcheng Rong
    • Lihai Chen

    Technical Paper 19 September 2022 Pages: 1596 - 1605

    

12. Influence of Al₁₁Ce₃ Size and Distribution on the Electrochemical Properties of Sonoprocessed Al-10 wt.% Ce Alloy

    • S. El-Hadad
    • M. E. Moussa
    • M. Shoeib

    Technical Paper Open access 20 September 2022 Pages: 1606 - 1614

    

13. An Analytical Approach for the Correlation Between Bifilm Index and Tensile Properties of AlSi7Mg0.3 (A356) Aluminum Alloy Cleaned via Rotary Degassing and Different Fluxes

    • Çağlar Yüksel
    • Derya Dışpınar
    • Mustafa Çiğdem

    Technical Paper 22 September 2022 Pages: 1615 - 1627

    

14. Effect of Compound Additives on the Adhesive Performance of Sodium Silicate Binder for Core-making

    • Lai Song
    • Weihua Liu
    • Yingmin Li

    Technical Paper 23 September 2022 Pages: 1628 - 1636

    

15. Hot Rolling of Thin-Wall Ductile Cast Iron Produced by Ablation Casting

    • E. Heidari
    • M. Mohammadzadeh
    • S. M. A. Boutorabi

    Technical Paper 24 September 2022 Pages: 1637 - 1649

    

16. Strength-Ductility Relationship of Squeezed In-Situ (ZrB₂+ Al₃Zr/Al₂O₃) Nanoparticles-Reinforced 6016Al Matrix Composites

    • Soban Muddassir Dar
    • Yutao Zhao
    • Chuang Guan

    Technical Paper 24 September 2022 Pages: 1650 - 1660

    

17. Development of Fe–Cr Slag mold for Al–Si Alloy (A356) Casting

    • Ramesh Kumar Nayak
    • Jatin Sadarang
    • Amitesh Kumar

    Technical Paper 24 September 2022 Pages: 1661 - 1672

    

18. Alternative Air Induction Melt–Remelt Processing of an Fe₃Al–C Intermetallic Alloy: Part II—High Temperature Cyclic Oxidation Behavior

    • Artur Mariano De Sousa Malafaia
    • Carolina Aurélia Ribeiro Maestro
    • Marcelo Falcão De Oliveira

    Technical Paper 26 September 2022 Pages: 1673 - 1680

    

19. Filtration Efficiency in the Recycling Process of Particle-Reinforced Aluminum Alloys Using Different Filter Materials

    • Johannes Paul Schoß
    • Benedict Baumann
    • Gotthard Wolf

    Technical Paper Open access 26 September 2022 Pages: 1681 - 1696

    

20. Experimental Study of Inorganic Foundry Sand Binders for Mold and Cast Quality

    • Nurul Anwar
    • Kalle Jalava
    • Juhani Orkas

    Technical Paper Open access 08 October 2022 Pages: 1697 - 1714

    

21. A Systematic Approach to Model and Optimize Qualities of Castings Produced by Squeeze Casting Process

    • Dashuang Zhou
    • Xiaoping Su
    • Zhi Li

    Technical Paper 08 October 2022 Pages: 1715 - 1735

    

22. Influence of Electromagnetic Ultrasound Dual Field Coupling In Situ Synthesis of (ZrB₂ + Al₃Zr)/AA6016 Composites on the Structure and Properties

    • Lei Jiao
    • Zhiwen Wang
    • Hui Li

    Technical Update 11 October 2022 Pages: 1736 - 1753

    

23. Correction: Influence of Electromagnetic Ultrasound Dual Field Coupling In Situ Synthesis of (ZrB₂ + Al₃Zr)/AA6016 Composites on the Structure and Properties

    • Lei Jiao
    • Zhiwen Wang
    • Hui Li

    Correction 01 November 2022 Pages: 1754 - 1754

24. Experimental Investigation of Effect of Process Parameters on the Tensile Strength of a Near Eutectic Aluminum-Silicon Alloy in Universal Centrifugal Casting Machine (UCCM)

    • Anandkumar K. Patel
    • Jeetendrakumar A. Vadher

    Technical Paper 11 October 2022 Pages: 1755 - 1762

    

25. Initial Oxidation Stage of SiMo and SiNb-xAl Ductile Cast Irons in Air and CO₂-Containing Atmospheres

    • Gülşah Aktaş Çelik
    • Ş. Hakan Atapek
    • Şeyda Polat

    Technical Paper 13 October 2022 Pages: 1763 - 1777

    

26. Ablation Casting of High-Aluminum Ductile Cast Iron (Fe-C-Al-Mg)

    • A. H. Fazeli
    • S. M. A. Boutorabi
    • H. Saghafian

    Technical Paper 17 October 2022 Pages: 1778 - 1790

    

27. Comparative Studies of Cr/Ti Additions for Cu₄₀Mn₂₅Al₂₀Fe₅Ni₅ HEA on Microstructure and Corrosion Behavior in HNO₃ Solution

    • Lamiaa Z. Mohamed
    • Khaled A. Abdelghafar
    • Ghalia A. Gaber

    Technical Paper Open access 18 October 2022 Pages: 1791 - 1805

    

28. Influence of V Content on Microstructure and Mechanical Properties of Gray Cast Iron for Super-Large Cylinder Liner

    • Yi-li Li
    • Qi Wang
    • Guang-long Li

    Technical Paper 20 October 2022 Pages: 1806 - 1814

    

29. Microstructure and Properties of Al-Si-Mg-Cu-Cr Matrix Composites Reinforced Using in situ TiB₂ Particles and (Ce + Yb)

    • Mingkun Qiu
    • Hao Liu
    • Wenru Hu

    Technical Paper 20 October 2022 Pages: 1815 - 1826

    

30. The Effect of Type of Master Alloys on the Mechanical and Wear Properties of Steel-Reinforced Tungsten Carbide Particles

    • Mansour Razavi
    • Safoura Bakhodaye Dehghanpour

    Technical Paper 21 October 2022 Pages: 1827 - 1844

    

31. Effect of Solution Treatment and Addition of Rare-Earth Yb on the Microstructure and Corrosion Resistance of AlSi₁₁Cu₃ Alloy

    • Shuqing Zhang
    • Jiajia He
    • Hong Yan

    Technical Paper 26 October 2022 Pages: 1845 - 1858

    

32. Carbide and Matrix Microstructure Evolution of High-Vanadium Wear-Resistance Cast Iron with High-Silicon Content During Austempering

    • Wanqing Leng
    • Liujie Xu
    • Ming Li

    Technical Paper 02 November 2022 Pages: 1859 - 1870

    

33. Rapid Casting of Biodegradable Porous Magnesium Scaffolds and Electrophoretic Deposition of 45S5 Bioactive Glass Nanoparticles Coatings on Porous Scaffolds: Characterization and In Vitro Bioactivity Analysis

    • Abdurrahim Temiz
    • Ammar Z. Alshemary
    • Mustafa Yaşar

    Technical Paper 04 November 2022 Pages: 1871 - 1882

    

34. Mechanical and Dry Sliding Wear Behaviour of AZ31-TiO₂ and AZ31-TiO₂-Sn Metal Matrix Composites

    • K. Thoufiq Mohammed
    • K. Manisekar

    Technical Paper 06 November 2022 Pages: 1883 - 1898

    

35. Recycling of Aluminium Matrix Composites (AMCs): A Review and the Way Forward

    • R. P. Barot
    • R. P. Desai
    • M. P. Sutaria

    Technical Paper 07 November 2022 Pages: 1899 - 1916

    

36. Evolution of the Si Phase and Mechanical and Tribological Properties of a B390 Aluminum Alloy Under the Addition of Ce Element

    • Jianfei Peng
    • Wanlin Wang
    • Junyu Ji

    Technical Paper 08 November 2022 Pages: 1917 - 1925

    

37. Effects of Melt-Constrained Flow-Induced Nucleation Channel Length on Temperature Field and Microstructure of CuSn10P1 Alloy Semi-Solid Slurry

    • Wentao Xiong
    • Rongfeng Zhou
    • Yongkun Li

    Technical Paper 11 November 2022 Pages: 1926 - 1947

    

38. Optimization of Casting System Structure Based on Genetic Algorithm for A356 Casting Quality Prediction

    • Huan Chen
    • Quanjie Gao
    • Hongxia Wang

    Technical Paper 15 November 2022 Pages: 1948 - 1969

    

39. Fracture Toughness and Thermal Investigations of Al 7075 — Cobalt Particulates Reinforced Alloy Composites Prepared Using High Vacuum Casting Method for Gear Applications: Proposed Thermal Conductivity and Fracture Toughness Modeling

    • Ashiwani Kumar
    • Mukesh Kumar

    Technical Paper 16 November 2022 Pages: 1970 - 1981

    

40. Microstructure Evolution During Rheoprocessing of A356 Al Alloy Using Cooling Slope

    • Prosenjit Das

    Technical Paper 20 November 2022 Pages: 1982 - 2001

    

41. Modeling of Investment Casting of Ti48Al48Cr2Nb2 (at%) Alloy Air Rudder Skeleton

    • Jingxi Wu
    • Yuyong Chen
    • Haiyan Jiang

    Technical Paper 20 November 2022 Pages: 2002 - 2016

    

42. Effect of Low-Frequency Alternating Magnetic Field Strength on Hot Tearing Susceptibility of AXJ530 Alloy

    • Xudong Du
    • Feng Wang
    • Pingli Mao

    Technical Paper 24 November 2022 Pages: 2017 - 2029

    

43. Casting Defect Analysis of Carbon Steel Using Sand Casting Experiments

    • Tomohiro Nishimura
    • Atsushi Kishimoto

    Technical Paper 29 November 2022 Pages: 2030 - 2037

    

44. Influence of Metal Casting Temperature and Cations on Phase Transformation of Silica Sand to Cristobalite

    • Nayana P. Hoolikantimath
    • Sanjeevkumar Dodamani
    • Praveen A. Ghorpade

    Technical Paper 29 November 2022 Pages: 2038 - 2049

    

45. Influence of Chemical Composition and Cooling Rate on Chunky Graphite Formation in Thick-Walled Ductile Iron Castings

    • Branko Bauer
    • Ivana Mihalic Pokopec
    • Mitja Petrič

    Technical Paper 30 November 2022 Pages: 2050 - 2061

    

46. Kinetic Effects on the Austenite Carbon Equivalent and Eutectic Carbon Equivalent of Silicon Cast Irons

    • Jacques Lacaze

    Technical Paper 30 November 2022 Pages: 2062 - 2071

    

47. An Indirect Evaluation Method of Mold Coating Thickness in AlSi Alloy Permanent Mold Casting Production

    • Fangtian Deng
    • Maheedhar Attaluri
    • Wolfram Volk

    Technical Paper Open access 30 November 2022 Pages: 2072 - 2084

    

48. Product Development of Alternative Alloy Wheel Material with Improved Mechanical Properties

    • Onur Özaydın
    • Adnan Dikicioğlu

    Technical Paper 01 December 2022 Pages: 2085 - 2102

    

49. Microstructure, Mechanical Property and Thermal Conductivity of Al–Si–Fe–Mg Alloy Solidified Under High Pressures

    • Haosheng Huang
    • Ye Wang
    • Dongdong Zhu

    Technical Paper 01 December 2022 Pages: 2103 - 2108

    

50. Measurement of Air Entrainment and its Effect on the Microstructure and Mechanical Properties of a A356 Aluminum Alloy

    • F. V. Guerra
    • A. Bedolla-Jacuinde
    • J. S. Pacheco-Cedeño

    Technical Paper 02 December 2022 Pages: 2109 - 2127