Online first articles
Articles not assigned to an issue 186 articles
-
-
Effect of Er Addition and Solution Treatment on the Microstructure and Mechanical Properties of Hypoeutectic Al–10%Mg2Si–3.5%Cu Alloy
Authors
- Xiaofeng Wu
- Fufa Wu
- Rongda Zhao
- Content type: Technical Paper
- Published: 12 May 2024
-
Simulation and Experimental Investigation of a Combined Control Method for Stray Grain During Single Crystal Blade Solidification
Authors (first, second and last of 5)
- Haoyu Zhao
- Kun Bu
- Pengguo Duan
- Content type: Technical Paper
- Published: 11 May 2024
-
The Influence of TiB2 Particles on the Artificial Aging Behavior of TiB2/Al–5Cu Composite
Authors (first, second and last of 9)
- Yiwang Jia
- Xiaojuan Shang
- Yongxiang Li
- Content type: Technical Paper
- Published: 11 May 2024
-
Solidification Processing of Reduced Graphene Oxide Dispersed Aluminum Composites by Squeeze Casting
Authors (first, second and last of 4)
- A. G. Arsha
- Omid Ghaderi
- P. K. Rohatgi
- Content type: Technical Paper
- Published: 10 May 2024
-
Comparison of Microstructure and Non-metallic Inclusions in Top-Filled and Bottom-Filled Gray Iron Castings
Authors
- Evan Carter
- Jingjing Qing
- Mingzhi Xu
- Content type: Technical Paper
- Published: 10 May 2024
-
Three-Dimensional Micromechanical Modelling of Deformation Behaviour of Rheocast A356 Alloy
Authors
- Durgesh Kumar Pandey
- Prosenjit Das
- Content type: Technical Paper
- Published: 10 May 2024
-
3D Printed Smart Mold for Sand Casting: Monitoring Binder Curing
Authors (first, second and last of 11)
- Nathaniel Bryant
- Josh O’Dell
- Rich Lonardo
- Content type: Technical Paper
- Published: 09 May 2024
-
GG20-GCI Brake Drum: The Effect of Mn/S on Machinability and Tensile Behavior
Authors
- Hanie Ghanbari
- Mostafa Ketabchi
- Esmaeil Damavandi
- Content type: Technical Paper
- Published: 09 May 2024
-
Publisher Correction: Gravity and Semisolid Casting of Self-Healing Aluminum Matrix Composites
Authors (first, second and last of 4)
- Sumit Sharma
- Masum Bellah
- Pradeep Rohatgi
- Content type: Publisher Correction
- Published: 08 May 2024
-
Nano-Al2O3 Particle Incorporated in Al Matrix Composite by Vortex-Free High-Speed Stir Casting
Authors (first, second and last of 7)
- Yinan Lu
- Yunhui Du
- Peng Zhang
- Content type: Technical Paper
- Published: 07 May 2024
-
Mechanical and Wear Behavior of Al-Si5Cu3/ZrB2 In-Situ Reinforced Metal Matrix Composite
Authors (first, second and last of 4)
- J. Jenix Rino
- A. S. Vivekananda
- Balasivanandha Prabu Shanmugavel
- Content type: Technical Paper
- Published: 07 May 2024
-
SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route
Authors (first, second and last of 9)
- M. Aruna
- S. Kaliappan
- A. H. Seikh
- Content type: Technical Paper
- Published: 07 May 2024
-
An Assessment of South African Chromite Sand Crushing Ratio
Authors
- Jonathan Kabadjundi Kabasele
- Kasongo Didier Nyembwe
- Content type: Technical Paper
- Open Access
- Published: 06 May 2024
-
Methodology to Remove or Scale Back the Solution Treatment in the Thermal Processing of the 319-Type Alloy Without Changing Material Properties
Authors
- Robert Mackay
- Glenn Byczynski
- Content type: Technical Paper
- Published: 03 May 2024
-
Predictive Analysis of Water Wettability and Corrosion Resistance of Secondary AlSi10MnMg(Fe) Alloy Manufactured by Vacuum-Assisted High Pressure Die Casting
Authors (first, second and last of 5)
- Amir Kordijazi
- Swaroop K. Behera
- Pradeep Rohatgi
- Content type: Technical Paper
- Published: 03 May 2024
-
Strength Evolution and Fracture Feature of Carbon Fiber-Reinforced Silica Sol Shell for Investment Casting
Authors (first, second and last of 5)
- Zhiran Zhang
- Chang Liu
- Xiangdong Liu
- Content type: Technical Paper
- Published: 03 May 2024
-
Effect of Wall Thickness on Properties of Multilayer Composite Plaster Mold for Investment Casting
Authors (first, second and last of 4)
- Yan Lu
- Kai Lü
- Zongxue Li
- Content type: Technical Paper
- Published: 03 May 2024
-
Evaluation of Two New Cast Aluminum Alloys for High Performance Cylinder Heads
Authors (first, second and last of 6)
- Qigui Wang
- Andrew Bobel
- Dale Gerard
- Content type: Technical Paper
- Published: 02 May 2024
-
Low CRI, High CSR Coke Trials
Authors
- Stephen Hay
- Bruce T. Blatzer
- Content type: Technical Paper
- Published: 02 May 2024
-
Bonding Bare Steel Insert to A354 Sand Casting Using Ultrasound-Assisted Cast-on Methods
Authors
- Dashan Sui
- Qingyou Han
- Content type: Technical Paper
- Published: 02 May 2024
-
Cooling Curves of Concentrated Alloys, Steelmaking Slag, and Lithium Iron Phosphate
Authors
- Delin Li
- Content type: Technical Paper
- Open Access
- Published: 28 April 2024
-
Applying the Spacing Transform on Secondary Dendrite Arm Spacing Measurements of a Cast High-Strength Low-Alloy Steel
Authors
- Z. Yang
- D. Ezemenaka
- C. Monroe
- Content type: Technical Paper
- Published: 28 April 2024
-
Improving Metal Flow in Lost Foam Casting Through Use of Low Thermal Degradation Hot Melt Adhesives
Authors (first, second and last of 6)
- Kyle Bieniewicz
- Matt Reich
- Jacob Belke
- Content type: Technical Paper
- Published: 25 April 2024
-
Linear Segregation in Low-Pressure Casting ZL205A Alloy Fully Enveloped Castings and its Formation Mechanism
Authors (first, second and last of 6)
- Xixi Huang
- Xiang Xue
- Shiping Wu
- Content type: Technical Paper
- Published: 24 April 2024
-
Effect of Two-Step Solution Treatments on the Microstructure and Mechanical Properties of B357 Aluminum Alloy
Authors
- Neset Akar
- Omer Sahin
- Volkan Kilicli
- Content type: Technical Paper
- Open Access
- Published: 24 April 2024
-
Gravity and Semisolid Casting of Self-Healing Aluminum Matrix Composites
Authors (first, second and last of 4)
- Sumit Sharma
- Masum Bellah
- Pradeep Rohatgi
- Content type: Technical Paper
- Published: 22 April 2024
-
Impact of Temperature of Cast Iron Chills on Tensile Properties in the Aluminum Precisions Sand Casting Process
Authors
- Robert Mackay
- Glenn Byczynski
- Content type: Technical Paper
- Published: 22 April 2024
-
Improving Scattered Defect Grading in Castings Digital Radiographs via Smoothing the One-Hot Encoding
Authors (first, second and last of 8)
- Han Yu
- Xingjie Li
- Huasheng Xie
- Content type: Technical Paper
- Published: 22 April 2024
-
Relationships Between Macrostructure and Microstructure in Lamellar Graphite Iron Castings
Authors
- Björn Domeij
- Attila Diószegi
- Content type: Technical Paper
- Open Access
- Published: 22 April 2024
-
Industry 4.0 Adoption Using AI/ML-Driven Metamodels for High-Performance Ductile Iron Sand Casting Design and Manufacturing
Authors
- Jiten Shah
- Brian Began
- Content type: Technical Paper
- Published: 22 April 2024
-
Wear Resistance and Mechanical Properties of 7085 Alloy via Adding CNTs Based on Ultrasonic Casting
Authors
- Li Anqing
- Jiang Ripeng
- Li Ruiqing
- Content type: Technical Paper
- Published: 22 April 2024
-
A Coupled Numerical Scheme for Simulating Liquid Metal Cooling Process in the Production of Superalloys
Authors (first, second and last of 5)
- Shengxu Xia
- Yuzhang Lu
- Jian Zhang
- Content type: Technical Development Report
- Published: 22 April 2024
-
The Effect of Tempering Temperature on Microstructure and Wear Behavior of Tungsten and Boron Alloyed Ni-Hard 4 White Cast Irons
Authors (first, second and last of 4)
- Burak Barutçuoğlu
- Funda Gül Koç
- Gülben Karaarslan
- Content type: Technical Paper
- Open Access
- Published: 22 April 2024
-
Iron and Steel Castings and Core Production Results from Finer Grades of Chromite Sand in Shell Applications
Authors (first, second and last of 4)
- Rob Steele
- Kelley Kerns
- Victor LaFay
- Content type: Technical Paper
- Published: 19 April 2024
-
Determination of Thermal Properties of Foundry Green Sand to Improve Numerical Simulation
Authors (first, second and last of 4)
- P. Jacquet
- A. Vaucheret
- J. F. Carton
- Content type: Technical Paper
- Published: 18 April 2024
-
Study on Semi-solid Slurry Preparation Process, Microstructure, and Mechanical Properties of Truck Bracket
Authors (first, second and last of 8)
- Zihan Lang
- Feng Wang
- Pingli Mao
- Content type: Technical Paper
- Published: 18 April 2024
-
The Effect of Si Content on the Microstructure and Mechanical Properties of Al–1.2Mg–xSi–1.2Cu–0.6Mn Cast Alloy
Authors (first, second and last of 7)
- Zulai Li
- Zhixiang Yang
- Han Xiao
- Content type: Technical Paper
- Published: 17 April 2024
-
Effects of Silicon in High-Cr White Cast Irons
Authors
- Richard B. Gundlach
- John M. Tartaglia
- Content type: Technical Paper
- Published: 05 April 2024
-
Study the Effects of Casting Revert–Virgin Alloy with Different Portion of Return (Revert) Materials on Microstructure, Mechanical Properties, and Creep Resistance of Inconel 713LC
Authors
- H. Farahani
- P. Melali
- M. Divandari
- Content type: Technical Paper
- Published: 04 April 2024
-
Graphite Spheroids: The Place Where they are Born
Authors (first, second and last of 4)
- Gorka Alonso
- D. M. Stefanescu
- Ramón Suárez
- Content type: Technical Paper
- Published: 04 April 2024
-
Foaming Behavior of AlMg4Si8 Matrix and Pure Al Matrix Precursors in Closed Cavities with Different TiH2 Addition Levels
Authors (first, second and last of 6)
- Guo Zhiqiang
- Gong Yonglin
- Li Jinwei
- Content type: Technical Paper
- Published: 03 April 2024
-
Development of a New Al-Fe-Ni Alloy for Electric Vehicle Applications
Authors
- Lei Pan
- Francis Breton
- Jerome Fourmann
- Content type: OriginalPaper
- Published: 01 April 2024
-
Effect of Alloying with Al, Nd and Ca and Heat Treatment on Microstructures and Mechanical Properties of Vacuum Die-Cast AM50 Alloy
Authors (first, second and last of 6)
- Yang Yang
- Feng Wang
- Jinwei Li
- Content type: Technical Paper
- Published: 29 March 2024
-
Study of the Wear Resistance Plasma Nitrided GGG60 by Optimization of Surface Treatment Conditions Using Response Surface Methodology
Authors (first, second and last of 4)
- İsmail Aykut Karamanli
- Mustafa Sabri Gök
- Okan Ünal
- Content type: Technical Paper
- Open Access
- Published: 29 March 2024
-
Influence of Investment Casting Manufacturing Conditions on As-Cast Microstructure and Erosive Wear Resistance of 26%Cr Cast Iron
Authors
- Huynh Kinh Luan Ngo
- Kaoru Yamamoto
- Tetsuya Okuyama
- Content type: Technical Paper
- Published: 25 March 2024
-
Thermal Distortion Testing at Ferrous Superheat Temperatures
Authors (first, second and last of 4)
- S. N. Ramrattan
- R. A. Makin
- S. Phalke
- Content type: Technical Paper
- Published: 23 March 2024
-
A Machine Learning-Based Surrogate Model for Similarity Criterion of Solidification
Authors (first, second and last of 6)
- Xixi Huang
- Xiang Xue
- Shiping Wu
- Content type: Technical Paper
- Published: 23 March 2024
-
A Study of Mg and Ti + Sr Additions to Strengthen Commercial A380 High-Pressure Die Cast Alloy
Authors
- Nirmal K. Datta
- Chi Liu
- Content type: Technical Paper
- Published: 22 March 2024
-
The “Schwarze Mander” of the Court Church in Innsbruck, Austria: Manufacture and Production of Monumental Brass Statues in the Renaissance
Authors
- Marianne Mödlinger
- Bastian Asmus
- Giorgia Ghiara
- Content type: Technical Paper
- Open Access
- Published: 22 March 2024
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more