Articles

1. Co-based and Co/WC Laser Metal Deposition: A Comparative Study between Continuous and Pulsed Wave Laser Process Conditions

   • Haideé Ruiz-Luna
   • Cinthia Estefania Cuevas-Mercado
   • Juan Manuel Alvarado-Orozco

   Research 25 April 2024

   

2. Effect of Process Parameters on Bend Angle during Underwater Laser Bending of SS304 Sheet

   • Ramsingh Yadav
   • Ravi Kant

   Research 13 April 2024

   

3. Evaluating the Effect of Deposition Strategy on Mechanical Characteristics of 316L Parts Produced by Laser Powder Directed Energy Deposition Process

   • Gabriele Piscopo
   • Luca Iuliano

   Research Open access 13 April 2024

   

4. An Experimental Investigation on the Laser Forming of Aluminum/Epoxy/Glass FMLs

   • Vahid Zal
   • Hassan Moslemi Naeini
   • Amir H. Roohi

   Research 01 April 2024

   

5. Experimental and Numerical Investigation of Effective Parameters and Optimization of Bending Angle by Response Surface Method in Laser Bending of Aluminum Sheets using Pulsed Nd: YAG Laser

   • Aliakbar Asgharpour
   • Mohammad Bakhshi-Jooybari
   • Hamid Gorji

   Research 19 March 2024

   

6. Editorial

   • Ali Gökhan Demir
   • Alessandro Fortunato
   • Michael F. Zaeh

   EditorialNotes 28 February 2024 Pages: 1 - 2

7. Comparative Analysis of RSM, ANN and ANFIS Techniques in Optimization of Process Parameters in Laser Assisted Turning of NITINOL Shape Memory Alloy

   • Chakala Naresh
   • M. D. Sameer
   • P. Subhash Chandra Bose

   Research 16 February 2024

   

8. Experimental Investigation on the Effect of Nickel-plating Thickness on Continuous-wave Laser Welding of Copper and Steel Tab Joints for Battery Manufacturing

   • Michele Francioso
   • Caterina Angeloni
   • Alessandro Ascari

   Research Open access 13 February 2024

   

9. A Comprehensive Review of Laser Wobble Welding Processes in Metal Materials: Processing Parameters and Practical Applications

   • Shahin Sanati
   • Seyedeh Fatemeh Nabavi
   • Hamid Dalir

   Review 05 February 2024

   

10. Temporal and Spatial Beam Shaping in LPBF for Fine and Porous Ti-Alloy Structures for Regenerative Fuel Cell Applications

    • Salomé Sanchez
    • Ahmad Zafari
    • Davoud Jafari

    Research Open access 01 February 2024 Pages: 154 - 178

    

11. CuCrZr Alloy Manufactured by LPBF Process: Correlation Between Microstructure, Mechanical and Thermal Properties

    • Carlo Alberto Biffi
    • Jacopo Fiocchi
    • Ausonio Tuissi

    Research Open access 18 January 2024 Pages: 143 - 153

    

12. Sensor Selection and Defect Classification via Machine Learning During the Laser Welding of Busbar Connections for High-Performance Battery Pack Production

    • Leonardo Caprio
    • Barbara Previtali
    • Ali Gökhan Demir

    Research 12 January 2024

    

13. Effects of Different Absorption Models in the Damage Dimensions for High-Power Laser Irradiation of CFRP: Numerical Modeling and Experimental Validation

    • Dipten Misra
    • Souren Mitra
    • Souradip Paul

    Research 09 January 2024

    

14. Effect of Process Parameters on Melt Pool Characteristics and Solidification Process During Laser Powder Bed Fusion of AlSi10Mg Alloy

    • Ashish Kumar Mishra
    • Arvind Kumar

    Research 06 January 2024

    

15. CO₂ Laser Sintering of TiO₂ Nanoparticles Thin Films for Improved Transmittance

    • Yahya Bougdid
    • Francois Chenard
    • Aravinda Kar

    Research 06 January 2024

    

16. The Influence of Beam Shape on the Single-Track Formation of Pure Zn Towards the Additive Manufacturing of Battery Electrodes

    • Chiara Baldi
    • Leonardo Caprio
    • Ali Gökhan Demir

    Research 02 January 2024 Pages: 125 - 142

    

17. Advanced Temporal Pulse Shape Control for Laser Soldering Application Based on Commercial CW 450 nm Diode Lasers

    • H. Iliev
    • N. Gorunski

    Research 27 December 2023

    

18. Numerical Modelling and Optimization of the Surface Qualities of Laser Cladded Ti-6Al-4V Alloy

    • Olanrewaju Seun Adesina
    • Abayomi Adewale Akinwande
    • Modupe Eunice Sanyaolu

    Research 26 December 2023

    

19. Enhanced Scaling of Material Removal Rate with High Surface Quality Through Combined Laser Processes

    • Matthias Buser
    • Markus Hofele
    • Andreas Michalowski

    Research Open access 22 December 2023

    

20. Experimental and Statistical Study on Mechanical Behavior of H13 Tool Steel Additively Manufactured and Laser Surface Treated

    • Lamya Baali
    • Shayan Dehghan
    • Véronique Dassylva-Raymond

    Research 19 December 2023

    

21. Buried Arc Application in Hybrid Laser-Arc Welding of Thermo-Mechanical Control Process Steels

    • Natália Wendt Dreveck
    • Tadeu Messias Donizete Borba
    • Danielle Bond

    Research 14 December 2023

    

22. Studies on the Use of Laser Directed Energy Deposition for the Additive Manufacturing of Lightweight Parts

    • Avelino Zapata
    • Christian Bernauer
    • Michael F. Zaeh

    Research Open access 08 December 2023 Pages: 109 - 124

    

23. Laser-Based Additive Manufacturing and Mechanical Surface Post-Processing: Comparison of Barrel Finishing, Shot and Ultrasonic Peening for Corrosion Resistance Improvement of Superalloy

    • D. A. Lesyk
    • B. N. Mordyuk
    • A. Lamikiz

    Research 13 November 2023 Pages: 702 - 734

    

24. Developing Laser-Assisted Machining Process for Nickel Based Superalloy IN625 Using Experimental and Statistical Analysis

    • B. Amarendhar Rao
    • Manish Tak
    • Ravi Bathe

    Research 04 November 2023 Pages: 681 - 701

    

25. Framework for Incorporating Machine Learning (ML) Driven Optimisation into Laser Materials Processing (LMP) Technologies for e-Mobility Applications towards Attaining Zero-Material Waste

    • Rehema Ndeda
    • Annelize Botes
    • Eyitayo Olatunde Olakanmi

    Review 02 November 2023 Pages: 77 - 108

    

26. Application of Hybrid Laser Arc Welding for Construction of LNG Tanks Made of Thick Cryogenic 9% Ni Steel Plates

    • Sergej Gook
    • Abdel-Monem El-Batahgy
    • Michael Rethmeier

    Research Open access 18 October 2023 Pages: 659 - 680

    

27. Microstructure and Properties of the Stellite6/WC Composite Coatings Prepared by Laser Cladding

    • Haoqiang Zhang
    • Hao Liu
    • Suoxia Hou

    Research 14 October 2023 Pages: 645 - 658

    

28. Pulsed Laser Grooving of Silicon Under Different Ambient Media

    • Tushar Ner
    • Pinal Rana
    • Deepak Marla

    Research 13 October 2023 Pages: 626 - 644

    

29. Inverse Model for Simultaneously Estimating Material Parameters and Absorption Coefficient in a Laser-Irradiated Sheet

    • U. Nath
    • V. Yadav

    Research 18 September 2023 Pages: 606 - 625

    

30. Towards an Understanding of the Challenges in Laser Beam Welding of Copper – Observation of the Laser-Matter Interaction Zone in Laser Beam Welding of Copper and Steel Using in Situ Synchrotron X-Ray Imaging

    • Florian Kaufmann
    • Julian Schrauder
    • Michael Schmidt

    Research Open access 13 September 2023 Pages: 37 - 76

    

31. Experimental Investigation of AISI 304 Plates Deformation Through Laser Trepanning Process

    • Paramasivan Kalvettukaran
    • Souradip Paul
    • Dipten Misra

    OriginalPaper 07 September 2023 Pages: 586 - 605

    

32. Laser Beam Polishing of PA12 Parts Manufactured by Powder Bed Fusion

    • Lukas Eckhardt
    • Michel Layher
    • Benjamin Buttler

    Research Open access 03 August 2023 Pages: 563 - 585

    

33. Impact of Melt Flow and Surface Tension on Gap Bridging During Laser Beam Welding

    • Joerg Volpp

    Research Open access 26 July 2023 Pages: 25 - 36

    

34. Effects of Surface Morphology with Pulse Duration Variation for Supercapacitor Electrode Fabrication Using ULPING Technique

    • Mayuresh Khot
    • Amirkianoosh Kiani

    Research 18 July 2023 Pages: 548 - 562

    

35. Non-Distractive Testing and Alloying by Nanosecond Nd: Yag Laser Technique as Alternative Method to Find Nano -ZnO/Al Different Properties

    • Narjis Zamil Abdulzahra

    Research 17 July 2023 Pages: 522 - 547

    

36. Laser welding in e-mobility: process characterization and monitoring

    • Caterina Angeloni
    • Michele Francioso
    • Luca Tomesani

    Research Open access 15 July 2023 Pages: 3 - 24

    

37. Laser Surface Remelting in Single-Crystal Nickel-based Superalloy using a Continuous Wave Fiber Laser

    • Srinivasa Rao Nandam
    • A. Venugopal Rao
    • Suhas S. Joshi

    Research 11 July 2023 Pages: 485 - 521

    

38. Deformed Ternary Phosphides III-P for Efficient Light Control in Optoelectronic Applications

    • A. Tarbi
    • T. Chtouki
    • M. Tlemçani

    Research 03 July 2023 Pages: 471 - 484

    

39. Experimental Optimization of Multi-Quality Laser Cutting Characteristics of Jute/Epoxy laminate: Full Factorial Design and Grey Relational Analysis

    • Nasr Bekraoui
    • Zakaria El Qoubaa
    • Elhachmi Essadiqi

    Research 03 July 2023 Pages: 443 - 470

    

40. Comprehensive review on residual stress control strategies in laser-based powder bed fusion process– Challenges and opportunities

    • V. Praveen Kumar
    • A. Vinoth Jebaraj

    Research 26 June 2023 Pages: 400 - 442

    

41. Nano-Sized Polyethylene Particles Produced by Nano-Second UV Laser Ablation

    • Ikuna Kanehara
    • Hiromasa Yamashita
    • Tadao Tanabe

    Research 10 June 2023 Pages: 389 - 399

    

42. CO₂ Laser Fabrication of a Passive continuous-flow T-shaped Polymethyl Methacrylate (PMMA) Micromixer

    • Job Lazarus Okello
    • Ahmed M. Fath El-Bab
    • Hassan A. El-Hofy

    Research 03 June 2023 Pages: 373 - 388

    

43. Experimental and Numerical Study of Heat Transfer in Thin-Walled Structures Built by Direct Metal Deposition and Geometry Improvement via Laser Power Modulation

    • Zahra Mianji
    • Andrey Kholopov
    • Kuzma Klimochkin

    Research 24 May 2023 Pages: 353 - 372

    

44. Effect of Build and Scan Direction on Tensile Properties of Selective Laser Melted SS316L Alloy

    • B. Sai Bharat Kumar
    • Dhananjay K. Yadav
    • Niraj Sinha

    OriginalPaper 02 May 2023 Pages: 330 - 352

    

45. Characteristics of the Aluminized IN738 Superalloy Using Laser Cladding Method

    • Bita Mottaghi Golshan
    • Monireh Ganjali

    Research 17 April 2023 Pages: 312 - 329

    

46. Productive Laser Machining of Sintered Carbide Using a Combination of Nanosecond and Femtosecond Laser Ablation

    • Tomas Primus
    • Pavel Zeman
    • Frantisek Holesovsky

    Research 15 April 2023 Pages: 296 - 311

    

47. Fabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO₂ and Diode Lasers

    • Memoon Sajid
    • Faisal Saeed Awan
    • Mohsin Saleem

    Research 14 April 2023 Pages: 276 - 295

    

48. Laser-Assisted Flux-Cored Arc Welding Underwater

    • Marcel Rieck
    • Benjamin Emde
    • Jörg Hermsdorf

    OriginalPaper Open access 13 March 2023 Pages: 266 - 275

    

49. Laser Surface Modification of Vermicular Cast Iron to Resist Erosion

    • Krishnadass Karthick
    • Muthukannan Duraiselvam

    OriginalPaper 25 February 2023 Pages: 251 - 265

    

50. Multifaceted Laser Applications for Wood – A Review from Properties Analysis to Advanced Products Manufacturing

    • Md. Nazrul Islam
    • Atanu Kumar Das
    • Magnus Rudolfsson

    ReviewPaper 15 February 2023 Pages: 225 - 250