1. Application of sophisticated sensors to advance the monitoring of machining processes: analysis and holistic review

   • Sumanth Ratna Kandavalli
   • Aqib Mashood Khan
   • Quentin Cheok

   Critical Review 05 January 2023 Pages: 989 - 1014

   

2. 3D printing of polylactic acid: recent advances and opportunities

   • Tomy Muringayil Joseph
   • Anoop Kallingal
   • Sabu Thomas

   Critical Review 07 January 2023 Pages: 1015 - 1035

   

3. A systematic review on digital human models in assembly process planning

   • Ming-Yue Yin
   • Jian-Guang Li

   Critical Review 10 January 2023 Pages: 1037 - 1059

   

4. An overview of surface roughness enhancement of additively manufactured metal parts: a path towards removing the post-print bottleneck for complex geometries

   • Haniyeh Fayazfar
   • Javid Sharifi
   • Mazyar Ansari

   Critical Review 12 January 2023 Pages: 1061 - 1113

   

5. An efficient closed-form solution for springback prediction and compensation in elastic–plastic creep age forming

   • Xi Wang
   • Qi Rong
   • Jianguo Lin

   ORIGINAL ARTICLE Open access 03 January 2023 Pages: 1115 - 1133

   

6. The friction mechanics model within chip-tool-workpiece dual interfaces for cutting nickel-based superalloy at the cooling and lubrication conditions of the three forms oil-on-water mist in wide temperature range

   • Furong Ma
   • Linhu Tang
   • Yongji Sun

   ORIGINAL ARTICLE 04 January 2023 Pages: 1135 - 1159

   

7. Experimental investigation of the low-temperature oil-on-water cooling and lubrication in turning the hardened AISI D2 steel

   • Jihui Zhang
   • Linhu Tang
   • Yongji Sun

   ORIGINAL ARTICLE 04 January 2023 Pages: 1161 - 1177

   

8. Modeling and simulation of the action mechanism of multi-particles in magnetic abrasive finishing for internal blind cavity using the discrete element method

   • Liaoyuan Wang
   • Yuli Sun
   • Dunwen Zuo

   Original Article 05 January 2023 Pages: 1179 - 1192

   

9. The development of an ANN surface roughness prediction system of multiple materials in CNC turning

   • PoTsang B. Huang
   • Maria Magdalena Wahyuni Inderawati
   • Ronald Sukwadi

   ORIGINAL ARTICLE 05 January 2023 Pages: 1193 - 1211

   

10. Electrochemical machining of blisk channels via synchronous rotations of the workpiece and the radial feeding cathode employing various feed rates

    • Jing Wang
    • Zhengyang Xu
    • Di Zhu

    Original Article 05 January 2023 Pages: 1213 - 1228

    

11. Deformation length in flexible roll forming

    • Hassan Badparva
    • Hassan Moslemi Naeini
    • Lucas F. M. da Silva

    Original Article 06 January 2023 Pages: 1229 - 1238

    

12. Periodical monitoring of 3D welds and defects generated from ultrasound scans

    • Etienne Provencal
    • Luc Laperrière

    Original Article 06 January 2023 Pages: 1239 - 1249

    

13. Towards a numerical modeling of the coupling between RTM process and induced mechanical properties for rigid particle-filled composites

    • Ahmed El Moumen
    • Abdelghani Saouab
    • Toufik Kanit

    Original Article 06 January 2023 Pages: 1251 - 1270

    

14. Effects of double pulse welding on microstructure, texture, and fatigue behavior of DP590 steel resistance spot weld

    • Imtiaz Ali Soomro
    • Srinivasa Rao Pedapati
    • Mohammad Azad Alam

    ORIGINAL ARTICLE 06 January 2023 Pages: 1271 - 1287

    

15. Energy consumption assessment in manufacturing Ti6Al4V electron beam melted parts post-processed by machining

    • Ersilia Cozzolino
    • Stefania Franchitti
    • Antonello Astarita

    Original Article Open access 06 January 2023 Pages: 1289 - 1303

    

16. Metallurgical and mechanical attributes of gas metal arc welded high-strength low-alloy steel

    • Dawei Zhao
    • Yuriy Bezgans
    • Vitaly Bykov

    Original Article 06 January 2023 Pages: 1305 - 1323

    

17. Investigation of the effect of surface transition on the formation of byproduct and flow marks during the electrochemical machining of 6061 aluminum

    • Zexi Zhang
    • Edward De Meter
    • Saurabh Basu

    ORIGINAL ARTICLE 06 January 2023 Pages: 1325 - 1341

    

18. Effect of discharge accumulation on wire breakage in WEDM process

    • Jun Wang
    • José A. Sánchez
    • Izaro Ayesta

    Original Article 06 January 2023 Pages: 1343 - 1353

    

19. The influence of a large build area on the microstructure and mechanical properties of PBF-LB Ti-6Al-4 V alloy

    • Axieh Joy I. Bagasol
    • Frederico R. Kaschel
    • Denis P. Dowling

    ORIGINAL ARTICLE Open access 06 January 2023 Pages: 1355 - 1369

    

20. The investigation of fracture characteristics and process optimization of low-cycle fatigue cropping by using an AET-based multi-sensor system

    • Yujian Ren
    • Boyang Liu
    • Jingzhou Gao

    ORIGINAL ARTICLE 06 January 2023 Pages: 1371 - 1382

    

21. Effect of auxiliary longitudinal magnetic field on overlapping deposition of wire arc additive manufacturing

    • Xushan Zhao
    • Yuanxun Wang
    • Runsheng Li

    ORIGINAL ARTICLE 06 January 2023 Pages: 1383 - 1401

    

22. Multi-objective optimisation of assembly fixturing layout for large composite fuselage panel reinforced by frames and stringers

    • Zhanghao Wang
    • Dongsheng Li
    • Yunong Zhai

    Original Article 06 January 2023 Pages: 1403 - 1418

    

23. Wire electric discharge machining and its effect on the surface finish of HfNbTaTiZr refractory high-entropy alloy

    • Ferhat Ceritbinmez
    • Erdoğan Kanca
    • Ali Günen

    Original Article 07 January 2023 Pages: 1419 - 1427

    

24. Influence of the velocity on quasi-static deflections of industrial articulated robots

    • Monica Katherine Gonzalez
    • Nikolas Theissen
    • Andreas Archenti

    ORIGINAL ARTICLE Open access 07 January 2023 Pages: 1429 - 1438

    

25. Analysis and experimental study of metal streamline structure of hot rolling forming of straight face gear

    • Yandong Xu
    • Guixiang Shen
    • Xiaozhong Deng

    Original Article 07 January 2023 Pages: 1439 - 1456

    

26. Variation in the properties of Ti-6Al-4V alloys fabricated by electron beam melting due to build plate location

    • Utku O. Gungor
    • Firat Memu
    • Nuri Durlu

    Original Article 09 January 2023 Pages: 1457 - 1476

    

27. A novel method for bearing fault diagnosis based on BiLSTM neural networks

    • Saadi Mohamed Nacer
    • Bouteraa Nadia
    • Boughazi Mohamed

    Original Article 09 January 2023 Pages: 1477 - 1492

    

28. Parameters affecting the quality of friction drilled holes and formed thread in austenitic stainless steel AISI 304

    • Nada Abdelmoneim Bassiouny
    • Mohammad Al-Makky
    • Helmi Youssef

    Original Article Open access 09 January 2023 Pages: 1493 - 1509

    

29. Developing the optimized control scheme for continuous and layer-wise DLP 3D printing by CFD simulation

    • Lidong Zhao
    • Yan Zhang
    • Feng Yang

    ORIGINAL ARTICLE 09 January 2023 Pages: 1511 - 1529

    

30. Influence of grinding wheel conditioning on the grindability of Ti-6Al-4V alloy

    • Mayara Fernanda Pereira
    • Bruno Souza Abrão
    • Rosemar Batista Da Silva

    Original Article 10 January 2023 Pages: 1531 - 1542

    

31. Experimental and finite element investigation on hybrid GTAW-GMAW of duplex stainless steel

    • Ali Ebrahimpour
    • Shahin Salami
    • Tohid Saeid

    Original Article 10 January 2023 Pages: 1543 - 1557

    

32. Numerical analysis modeling of temperature field in swing-arc narrow gap GMA welding with additional wire

    • Yejun Wu
    • Jiayou Wang
    • Yuqing Jiang

    Original Article 10 January 2023 Pages: 1559 - 1576

    

33. Online prediction of automotive tempered glass quality using machine learning

    • Abdelmoula Khdoudi
    • Noureddine Barka
    • Choumicha El Mazgualdi

    ORIGINAL ARTICLE 10 January 2023 Pages: 1577 - 1602

    

34. Surface modeling and load distribution analysis of ball screw formed by whirling milling

    • Lei Lv
    • Changhou Lu
    • Shujiang Chen

    ORIGINAL ARTICLE 11 January 2023 Pages: 1603 - 1614

    

35. Effects of parameter selection strategy on tool wear when milling 3D-printed functionally graded materials with textured tool under minimum quantity lubrication

    • Chengdong Wang
    • Yang Ge
    • Shu Huang

    Original Article 11 January 2023 Pages: 1615 - 1632

    

36. Arc shape and dynamic behavior of the Tri-Arc twin-wire GMAW process

    • Pu Zhong
    • Liangyu Li
    • Guochun Ren

    Original Article 11 January 2023 Pages: 1633 - 1643

    

37. A point cloud-based welding trajectory planning method for plane welds

    • Zhang Yuankai
    • Jiang Yong
    • Lai Min

    ORIGINAL ARTICLE 12 January 2023 Pages: 1645 - 1659

    

38. A prior knowledge-integrated method of carbon emissions modeling and optimization for gear hobbing with small sample problem

    • Qian Yi
    • Chun Liu
    • Chunhui Hu

    Original Article 12 January 2023 Pages: 1661 - 1678

    

39. Calculation model of the concave mirror depth in gas jet forming of the mirror blank

    • Weijie Fu
    • Weiwen Jiang
    • Xinming Zhang

    ORIGINAL ARTICLE 12 January 2023 Pages: 1679 - 1687

    

40. Numerical simulation of continuous laser microdrilling of ultrathick aluminum honeycomb sandwich panels

    • Yubo Chang
    • Shiju E
    • Zisheng Xu

    Original Article 13 January 2023 Pages: 1689 - 1700

    

41. Investigation on limited thickening ratio of upsetting with a controllable deformation zone

    • Dongkai Xu
    • Yin Zhu
    • Xincun Zhuang

    ORIGINAL ARTICLE 13 January 2023 Pages: 1701 - 1711

    

42. Toolpath planning method with the constraint of cutting force fluctuation in slow tool servo turning for complex curved surface parts

    • Feng-Ze Qin
    • Zhen-Yuan Jia
    • Guan-Lin Li

    Original Article 13 January 2023 Pages: 1713 - 1729

    

43. Precision inspection of transparent component quality

    • Rahima Meziane
    • Saїd Meguellati
    • Meriem Messagier

    Original Article 13 January 2023 Pages: 1731 - 1741

    

44. Study on the additively manufactured porous metal-bonded grinding wheel designed by octahedron lattice structure

    • Chenchen Tian
    • Yi Wan
    • Yiming Rong

    Original Article 13 January 2023 Pages: 1743 - 1756

    

45. A double-NURBS approach to the generation of trochoidal tool path

    • Chia-Hao Chang
    • Ming Huang
    • Hong-Tzong Yau

    ORIGINAL ARTICLE 14 January 2023 Pages: 1757 - 1776

    

46. Fault feature selection for the identification of compound gear-bearing faults using firefly algorithm

    • Andrews Athisayam
    • Manisekar Kondal

    ORIGINAL ARTICLE 14 January 2023 Pages: 1777 - 1788

    

47. Statistical learning and optimization of the helical milling of the biocompatible titanium Ti-6Al-7Nb alloy

    • Tomás Barbosa da Costa
    • Robson Bruno Dutra Pereira
    • J. Paulo Davim

    ORIGINAL ARTICLE 14 January 2023 Pages: 1789 - 1813

    

48. Cutting performance and lubrication mechanism of microtexture tool with continuous lubrication on tool-chip interface

    • Tongkun Cao
    • Zonggao Li
    • Weifeng Zhang

    ORIGINAL ARTICLE 14 January 2023 Pages: 1815 - 1826

    

49. A novel collaborative optimization assembly process method for multi-performance of aeroengine rotors

    • Tao Li
    • Zhenhua Wen
    • Qingchao Sun

    Original Article 14 January 2023 Pages: 1827 - 1843

    

50. Automatic preform design and optimization for aeroengine disk forgings

    • Yan Han
    • Menghan Wang
    • Xiang Xiang

    ORIGINAL ARTICLE 16 January 2023 Pages: 1845 - 1858