1. Modelling of liquid loading in gas wells using a software-based approach

   • Kingsley Eromoses Abhulimen
   • K. E. Abhulimen
   • A. D. Oladipupo

   Original Paper-Production Engineering Open access 06 August 2022 Pages: 1 - 17

   

2. Predicting shear wave velocity from conventional well logs with deep and hybrid machine learning algorithms

   • Meysam Rajabi
   • Omid Hazbeh
   • Ahmed E. Radwan

   Original Paper-Production Geophysics Open access 11 July 2022 Pages: 19 - 42

   

3. Probabilistic assessment of equivalent fracture aperture constrained on quasi-real-time drilling mud loss data

   • S. E. Patani
   • I. Colombo
   • A. Guadagnini

   Original Paper-Exploration Geophysics Open access 11 July 2022 Pages: 43 - 58

   

4. Numerical simulation of hydraulic fracture height using cohesive zone method

   • Son Tung Pham
   • Ba Ngoc Anh Nguyen

   Original Paper-Production Engineering Open access 19 July 2022 Pages: 59 - 77

   

5. Towards prediction of oil recovery by spontaneous imbibition of modified salinity brine into limestone rocks: A scaling study

   • Seyed Mojtaba Bassir
   • Hassan Shokrollahzadeh Behbahani
   • Abouzar Mirzaei-Paiaman

   Original Paper-Production Engineering Open access 11 July 2022 Pages: 79 - 99

   

6. A new water flooding characteristic curve at ultra-high water cut stage

   • Shanshan Li
   • Qihong Feng
   • Yingsong Huang

   Original Paper-Production Engineering Open access 11 July 2022 Pages: 101 - 110

   

7. Study on polymer mechanical degradation in core plugs versus in capillary tubes

   • Dongqing Cao
   • Ming Han
   • Jinxun Wang

   Original Paper-Production Engineering Open access 15 July 2022 Pages: 111 - 121

   

8. The impact of overbalance pressure on the alteration of sandstone geomechanical properties

   • Hany Gamal
   • Salaheldin Elkatatny

   Original Paper-Production Engineering Open access 19 July 2022 Pages: 123 - 133

   

9. 4D seismic co-processing pre-stack depth migration for scarce acquisition repeatability

   • Mohamed Mahgoub
   • Yasir Bashir
   • Abdel Wahab Noufal

   Original Paper-Exploration Geophysics Open access 19 July 2022 Pages: 135 - 149

   

10. Geophysical logging in brittleness evaluation on the basis of rock mechanics parameters: a case study of sandstone of Shanxi formation in Yanchang gas field, Ordos Basin

    • Zhenhua Li
    • Zhanjun Chen
    • Weida Huo

    Original Paper-Exploration Geology Open access 11 July 2022 Pages: 151 - 162

    

11. Formation damage simulation of a multi-fractured horizontal well in a tight gas/shale oil formation

    • Dung Bui
    • Tan Nguyen
    • Hyunsang Yoo

    Original Paper-Production Engineering Open access 19 July 2022 Pages: 163 - 184

    

12. XFEM modeling of the effect of in-situ stresses on hydraulic fracture characteristics and comparison with KGD and PKN models

    • Morteza Esfandiari
    • Ali Pak

    Original Paper-Exploration Engineering Open access 19 July 2022 Pages: 185 - 201

    

13. Developing a relationship between static Young’s modulus and seismic parameters

    • Javad Sharifi
    • Mohammad Nooraiepour
    • Nazmul Haque Mondol

    Original Paper-Exploration Geophysics Open access 19 July 2022 Pages: 203 - 218

    

14. Low-field NMR investigation on interaction of ZnO nanoparticles with reservoir fluids and sandstone rocks for enhanced oil recovery

    • Osamah Alomair
    • Adel Elsharkawy
    • Salim Ok

    Original Paper-Production Engineering Open access 20 July 2022 Pages: 219 - 235

    

15. An integrated source rock potential, sequence stratigraphy, and petroleum geology of (Agbada-Akata) sediment succession, Niger delta: application of well logs aided by 3D seismic and basin modeling

    • A. I. Diab
    • Oluseun Sanuade
    • Ahmed E. Radwan

    Original Paper-Exploration Geophysics Open access 02 August 2022 Pages: 237 - 257

    

16. Modal state vectors of a free-hanging drilling riser during deployment and retrieval

    • Xingkun Zhou
    • Zhengguang Ge
    • Wenhua Li

    Original Paper-Exploration Engineering Open access 26 July 2022 Pages: 259 - 273

    

17. Post-drill geophysical characterization of two deep-water wells of Cauvery Basin, East Coast of India

    • Minakshi Mishra
    • Atul Kumar Patidar

    Original Paper-Exploration Geophysics Open access 26 July 2022 Pages: 275 - 295

    

18. Implications of machine learning on geomechanical characterization and sand management: a case study from Hilal field, Gulf of Suez, Egypt

    • Wael K. Abdelghany
    • M. S. Hammed
    • Nassar T.

    Original Paper-Production Geology Open access 06 August 2022 Pages: 297 - 312

    

19. The potential of offshore Nile Delta Basin natural gas reserves: a case study of Messinian reservoir in Baltim field

    • Mohammad Abdelfattah Sarhan

    Original Paper-Exploration Geophysics Open access 02 August 2022 Pages: 313 - 328

    

20. Building 1D and 3D static reservoir geomechanical properties models in the oil field

    • Manouchehr Sanei
    • Ahmad Ramezanzadeh
    • Amin Asgari

    Original Paper-Exploration Engineering Open access 06 August 2022 Pages: 329 - 351

    

21. Effect of CO₂ on the interfacial tension and swelling of crude oil during carbonated water flooding

    • Zahra Taghizadeh Farahabadi
    • Mostafa Lashkarbolooki

    Original Paper-Production Engineering Open access 09 August 2022 Pages: 353 - 364

    

22. Development of an effective completion schedule for a petroleum reservoir with strong aquifer to control water production

    • Vahid Azamipour
    • Mehdi Assareh
    • Rana Eshraghi

    Original Paper-Production Engineering Open access 11 August 2022 Pages: 365 - 380

    

23. Investigation of the Cretaceous total petroleum system using wireline logs, core, and geochemical data in Bahrah Field, Northern Basin, Kuwait

    • Najeeb S. Aladwani
    • Abdulmohsen Alenezi
    • Ahmed Diab

    Original Paper-Exploration Geophysics Open access 09 August 2022 Pages: 381 - 406

    

24. Feasibility study of underbalanced drilling using geomechanical parameters and finite element method

    • Ehsan Larki
    • Abbas Ayatizadeh Tanha
    • Mohammad Fazaeilzadeh

    Original Paper-Exploration Geology Open access 02 September 2022 Pages: 407 - 426

    

25. Hydrocarbon generation and expulsion process in the deepwater area of the Qiongdongnan Basin of China: insights from artificial thermal maturation experiments

    • Shuncun Zhang
    • Long Su
    • Qiangqiang Kang

    Original Paper-Exploration Geology Open access 07 September 2022 Pages: 427 - 438

    

26. Durability of lightweight oil-well geopolymer system in sulfate environment

    • Stephen Adjei
    • Ahmed Abdelaal
    • Ahmed Mohsen Abdelfattah

    Original Paper - Production Engineering Open access 05 September 2022 Pages: 439 - 448

    

27. Construction of 2D and 3D rock physics templates for quantitative prediction of physical properties of a carbonate reservoir in SW of Iran

    • Forouzan Rahmani
    • Mohammad Emami Niri
    • Golnaz Jozanikohan

    Original Paper - Exploration Geophysics Open access 05 September 2022 Pages: 449 - 470

    

28. Experimental study of effective compounds in a smart water injection process

    • Samaneh Bovard
    • Mohammad Taghi Sadeghi
    • Rohaldin Miri

    Original Paper - Production Engineering Open access 04 November 2022 Pages: 471 - 485

    

29. The dynamic relationships among growth in the logistics industry, energy consumption, and carbon emission: recent evidence from China

    • Xiaole Wang
    • Feng Dong

    Original Paper - Production Engineering Open access 12 September 2022 Pages: 487 - 502

    

30. Correction: 3D geo-cellular modeling for Oligocene reservoirs: a marginal field in offshore Vietnam

    • Hung Vo Thanh
    • Kang-Kun Lee

    Correction Open access 02 August 2022 Pages: 503 - 503