1. Thermodynamic characteristics of the Pb-Bi alloys in the KCl-PbCl₂ melt

   • Yu. R. Khalimullina
   • Yu. P. Zaikov
   • N. G. Molchanova

   Metallurgy of Nonferrous Metals 08 July 2011 Pages: 197 - 204

2. Plastic properties of homogenized coke-pitch compositions

   • E. P. Vershinina
   • E. M. Gil’debrandt
   • V. K. Frizorger

   Metallurgy of Nonferrous Metals 08 July 2011 Pages: 205 - 208

3. Kinetics of hydrochloric acid leaching of smithsonite

   • Nikhil Dhawan
   • M. Sadegh Safarzadeh
   • Mustafa Birinci

   Metallurgy of Nonferrous Metals 08 July 2011 Pages: 209 - 216

4. Investigation into the influence of hydroxyl ions on the mechanism of interaction between cyanic compounds of gold and an active surface of carbon sorbents

   • V. V. Elshin
   • V. A. Shagun
   • A. E. Ovsyukov

   Metallurgy of Rare and Noble Metals 08 July 2011 Pages: 217 - 220

5. Features of interaction between copper melt and air oxygen after deoxidization

   • A. N. Konovalov
   • S. M. Urumbaev

   Foundry 08 July 2011 Pages: 221 - 222

6. Improvement of configuration of a metal reservoir for casting with centrifugation of the melt

   • V. N. Sharshin
   • V. A. Kechin
   • D. V. Sukhorukov

   Foundry 08 July 2011 Pages: 223 - 226

7. Temperature conditions and modes of formation of residual stresses in wiredrawing

   • G. L. Kolmogorov
   • N. A. Kosheleva
   • T. V. Chernova

   Pressure Treatment of Metals 08 July 2011 Pages: 227 - 229

8. Region for extrolling feasibility and effective deformation modes

   • A. R. Fastykovskii

   Pressure Treatment of Metals 08 July 2011 Pages: 230 - 233

9. Investigation of zirconium-containing aluminum alloys

   • V. M. Grigor’ev

   Physical Metallurgy and Heat Treatment 08 July 2011 Pages: 234 - 243

10. Influence of iron and silicon on the phase composition and structure of heat-resistant casting nikalines strengthened by nanoparticles

    • N. A. Belov
    • A. N. Alabin
    • S. S. Mishurov

    Physical Metallurgy and Heat Treatment 08 July 2011 Pages: 244 - 253

11. Purification of an industrial aluminum alloy by melt stirring during ohno continuous casting process

    • Simbarashe Fashu
    • Li Jianguo
    • Hu Qiao Dan

    Physical Metallurgy and Heat Treatment 08 July 2011 Pages: 254 - 261

12. High-temperature electrometallurgical synthesis of tungsten and molybdenum carbides

    • V. V. Malyshev
    • A. I. Gab

    Powder Materials and Coatings 08 July 2011 Pages: 262 - 265

13. Features of decision making while managing enterprises in nonferrous metallurgy using the example of a gold-mining company

    • I. Ya. Gol’fand
    • N. V. Krapukhina
    • E. M. Fokina

    Economics and Management 08 July 2011 Pages: 266 - 274

14. Current-conducting coatings based on heat-resistant titanium compounds obtained by self-propagating high-temperature synthesis

    • A. M. Shul’pekov
    • G. V. Lyamina
    • Yu. M. Maksimov

    Self-Propagating High-Temperature Synthesis 08 July 2011 Pages: 275 - 279

15. Phase transformations during annealing of WC-Co powders

    • M. N. Putintseva
    • Yu. P. Bashurov

    Refractory, Ceramic, and Composite Materials 08 July 2011 Pages: 280 - 284

16. Activated sintering of W-HfC composite materials

    • S. V. Vikhman
    • O. G. Klimova
    • D. -I. Cheong

    Refractory, Ceramic, and Composite Materials 08 July 2011 Pages: 285 - 289

17. Effect of electric field on the destruction of the friction surface of sintered metal composites

    • M. I. Aleutdinova
    • V. V. Fadin

    Refractory, Ceramic, and Composite Materials 08 July 2011 Pages: 290 - 294

18. High-temperature strength and refractoriness of doped WC-Co-Ni-Re(Mn) hard alloys

    • I. B. Panteleev
    • T. V. Lukashova
    • S. S. Ordan’yan

    Refractory, Ceramic, and Composite Materials 08 July 2011 Pages: 295 - 297

19. Installation for vacuum-arc treatment of the surface of construction materials

    • V. V. Demidenko
    • G. V. Potemkin
    • P. E. Revin

    Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Flows 08 July 2011 Pages: 298 - 303

20. Changes in microstructure of cold-worked aluminum-lithium alloy 1441 initiated by powerful pulsed ion beams

    • V. V. Ovchinnikov
    • G. E. Remnev
    • L. I. Kaigorodova

    Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Flows 08 July 2011 Pages: 304 - 310

21. Nanostructured Ti-Cr-B-N and Ti-Cr-Si-C-N coatings for hard-alloy cutting tools

    • F. V. Kiryukhantsev-Korneev
    • A. N. Sheveiko
    • D. V. Shtansky

    Nanostructured Materials and Functional Coatings 08 July 2011 Pages: 311 - 318

22. Investigation into processes of mechanical alloying when obtaining composite materials with nanodimensional strengthening particles

    • V. A. Popov
    • V. A. Zaitsev
    • M. N. Koval’chuk

    Nanostructured Materials and Functional Coatings 08 July 2011 Pages: 319 - 323

23. Development of environmentally oriented processes for obtaining the articles from aluminum powders by powder metallurgy: Report 1. Functional simulation of processes of powder metallurgy of aluminum

    • A. Yu. Kem

    Control Over Quality of Processes and Materials 08 July 2011 Pages: 324 - 328