1. Alloying Element Nitride Development in Ferritic Fe-Based Materials Upon Nitriding: A Review

   • T. Steiner
   • E. J. Mittemeijer

   ReviewPaper Open access 26 April 2016 Pages: 2091 - 2102

   

2. Inverse Thermal Analysis of Steel Welds Using Solidification-Boundary Constraints

   • S. G. Lambrakos

   OriginalPaper 02 May 2016 Pages: 2103 - 2115

   

3. Effect of Material Inhomogeneity on Thermal Performance of a Rheocast Aluminum Heatsink for Electronics Cooling

   • M. Payandeh
   • I. Belov
   • M. Wessén

   OriginalPaper 10 May 2016 Pages: 2116 - 2127

   

4. Microstructure Modeling of a Ni-Fe-Based Superalloy During the Rotary Forging Process

   • A. Loyda
   • G. M. Hernández-Muñoz
   • P. Zambrano-Robledo

   OriginalPaper 11 May 2016 Pages: 2128 - 2137

   

5. Effects of Heat Treatment on Microstructural Modification of As-Cast Gamma-TiAl Alloy

   • Mehdi Ahmadi
   • Seyed Rahman Hosseini
   • Seyed Mohammad Mehdi Hadavi

   OriginalPaper 26 April 2016 Pages: 2138 - 2146

   

6. Effect of Prior and Post-Weld Heat Treatment on Electron Beam Weldments of (α + β) Titanium alloy Ti-5Al-3Mo-1.5V

   • V. Anil Kumar
   • R. K. Gupta
   • P. V. Venkitakrishnan

   OriginalPaper 11 May 2016 Pages: 2147 - 2156

   

7. Bonding Interface and Bending Deformation of Al/316LSS Clad Metal Prepared by Explosive Welding

   • Xunzhong Guo
   • Minyu Fan
   • Fuye Ma

   OriginalPaper 19 April 2016 Pages: 2157 - 2163

   

8. Microstructure and Properties of FeAlCrNiMo _x High-Entropy Alloys

   • X. C. Li
   • D. Dou
   • J. C. Li

   OriginalPaper 19 April 2016 Pages: 2164 - 2169

   

9. A New XRD Method to Quantify Plate and Lath Martensites of Hardened Medium-Carbon Steel

   • Quanshun Luo

   OriginalPaper Open access 20 April 2016 Pages: 2170 - 2179

   

10. Preparation and Thermoelectric Properties of Sn-Based Type VIII Single-Crystalline Clathrate Via a-Sn Flux Method

    • Feng Cheng
    • Lanxian Shen
    • Shukang Deng

    ReviewPaper 20 April 2016 Pages: 2180 - 2184

    

11. Microstructure and Mechanical Behavior of Al 7075-T6 Subjected to Shallow Cryogenic Treatment

    • K. Mohan
    • J. A. Suresh
    • R. Jayaganthan

    OriginalPaper 22 April 2016 Pages: 2185 - 2194

    

12. Effect of Heat Treatment on Microstructure and Hot Impact Toughness of Various Zones of P91 Welded Pipes

    • C. Pandey
    • M. M. Mahapatra

    OriginalPaper 20 April 2016 Pages: 2195 - 2210

    

13. Performance of New Pb-Bi Alloys for Pb-Acid Battery Applications: EIS and Polarization Study

    • Leandro C. Peixoto
    • Ausdinir D. Bortolozo
    • Wislei R. Osório

    OriginalPaper 25 April 2016 Pages: 2211 - 2221

    

14. Effect of Micro- and Nano-SiC Particulate Reinforcements in Magnesium-Based Metal Matrix Composites

    • Ming-Jie Shen
    • Tao Ying
    • Jun-Ming Hou

    OriginalPaper 25 April 2016 Pages: 2222 - 2229

    

15. Deformation Behavior Immediately After Indentation Load Change in Ultrafine-Grained Al-Mg Solid Solution Alloys

    • Hidenari Takagi
    • Masami Fujiwara

    OriginalPaper 26 April 2016 Pages: 2230 - 2235

    

16. Grain Boundary Character Distribution of TLM Titanium Alloy During Deformation

    • X. F. Bai
    • Y. Q. Zhao
    • B. Li

    OriginalPaper 28 April 2016 Pages: 2236 - 2244

    

17. Microstructure and Corrosion Behavior of Hot-Deformed and Cold-Strained High-Mn Steels

    • A. Grajcar
    • M. Kciuk
    • A. Płachcińska

    OriginalPaper Open access 29 April 2016 Pages: 2245 - 2254

    

18. Effect of Strain Rate on Deformation Behavior of AlCoCrFeNi High-Entropy Alloy by Nanoindentation

    • L. Tian
    • Z. M. Jiao
    • J. W. Qiao

    OriginalPaper 05 May 2016 Pages: 2255 - 2260

    

19. Properties of Light MMCs Modified with Cordierite Synthesized from Fly Ash

    • Piotr Długosz
    • Angelika Rączka
    • Marek Hebda

    OriginalPaper Open access 05 May 2016 Pages: 2261 - 2266

    

20. Constitutive Equations and Flow Behavior of an As-Extruded AZ31 Magnesium Alloy Under Large Strain Condition

    • Yuanyuan Dong
    • Cunsheng Zhang
    • Guoqun Zhao

    OriginalPaper 10 May 2016 Pages: 2267 - 2281

    

21. Influence of Diamond Particles Coated with TiO₂ Film on Wettability of Vitrified Bond and Transverse Rupture Strength (TRS) of Vitrified Bond Composites

    • Dongdong Song
    • Long Wan
    • Jianwei Li

    OriginalPaper 11 May 2016 Pages: 2282 - 2287

    

22. On the Degradation Mechanism of Low-Voltage Underground Cable with Poly(Vinyl Chloride) Insulation

    • H. M. Tawancy
    • M. Hassan

    OriginalPaper 11 May 2016 Pages: 2288 - 2295

    

23. Formability Evaluation of Sheet Metals Based on Global Strain Distribution

    • Ling Zhang
    • Jianping Lin
    • Liugen Kang

    OriginalPaper 20 April 2016 Pages: 2296 - 2306

    

24. Effect of Double Aging Heat Treatment on the Short-Term Creep Behavior of the Inconel 718

    • Felipe Rocha Caliari
    • Kátia Cristiane Gandolpho Candioto
    • Danieli Aparecida Pereira Reis

    OriginalPaper 22 April 2016 Pages: 2307 - 2317

    

25. Magnetic Hysteresis Loop as a Tool for the Evaluation of Microstructure and Mechanical Properties of DP Steels

    • J. N. Mohapatra
    • Satendra Kumar
    • Marutiram Kaza

    OriginalPaper 25 April 2016 Pages: 2318 - 2325

    

26. Influence of Binder Adhesion Ability on the Performance of Silicon/Carbon Composite as Li-Ion Battery Anode

    • Krzysztof Kierzek

    OriginalPaper Open access 28 April 2016 Pages: 2326 - 2330

    

27. Influence of Fe₃O₄ Nanoparticles in Hydroxyapatite Scaffolds on Proliferation of Primary Human Fibroblast Cells

    • H. Maleki-Ghaleh
    • E. Aghaie
    • M. H. Siadati

    OriginalPaper 02 May 2016 Pages: 2331 - 2339

    

28. Effect of Annealing Treatment on Erosion-Corrosion of Zr-Based Bulk Metallic Glass in Saline-Sand Slurry

    • Xiulin Ji
    • Yiping Shan
    • Hui Wang

    OriginalPaper 04 May 2016 Pages: 2340 - 2346

    

29. Investigations of Aluminum-Doped Self-Healing Zircaloy Surfaces in Context of Accident-Tolerant Fuel Cladding Research

    • James Carr
    • Gokul Vasudevamurthy
    • Caleb Massey

    OriginalPaper 05 May 2016 Pages: 2347 - 2355

    

30. Enhancing Thermal Conductivity of Mg-Sn Alloy Sheet by Cold Rolling and Aging

    • Qiuyan Huang
    • Aitao Tang
    • Fusheng Pan

    OriginalPaper 10 May 2016 Pages: 2356 - 2363

    

31. Passivity and Localized Corrosion of AZ31 Magnesium Alloy in High pH Electrolytes

    • Sultan Alsagabi
    • Jakraphan Ninlachart
    • Indrajit Charit

    OriginalPaper 10 May 2016 Pages: 2364 - 2374

    

32. Microstructure and Scratch Resistance of TaC Dense Ceramic Layer on an Iron Matrix

    • Nana Zhao
    • Yunhua Xu
    • Vladimir E. Ovcharenko

    OriginalPaper 10 May 2016 Pages: 2375 - 2383

    

33. Long-Term Anti-Corrosion Performance of a Conducting Polymer-Based Coating System for Steels

    • Tongyan Pan
    • Qifeng Yu

    OriginalPaper 11 May 2016 Pages: 2384 - 2394

    

34. Effect of Post Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires

    • G. R. Mirshekari
    • A. Saatchi
    • S. K. Sadrnezhaad

    OriginalPaper 21 April 2016 Pages: 2395 - 2402

    

35. Microstructure and Fatigue Behavior of Friction Stir-welded Noncombustive Mg-9Al-Zn-Ca Magnesium Alloy

    • L. Zhou
    • Z. Y. Li
    • J. S. Liao

    OriginalPaper 21 April 2016 Pages: 2403 - 2411

    

36. Microstructure and Tribological Properties of In Situ Synthesized TiN Reinforced Ni/Ti Alloy Clad Layer Prepared by Plasma Cladding Technique

    • Guo Jin
    • Yang Li
    • Zhaobing Cai

    OriginalPaper 21 April 2016 Pages: 2412 - 2419

    

37. Effect of Hot Coiling Under Accelerated Cooling on Development of Non-equiaxed Ferrite in Low Carbon Steel

    • H. A. Lanjewar
    • Pranavkumar Tripathi

    OriginalPaper 22 April 2016 Pages: 2420 - 2431

    

38. Precipitation Hardening and Statistical Modeling of the Aging Parameters and Alloy Compositions in Al-Cu-Mg-Ag Alloys

    • A. M. Al-Obaisi
    • E. A. El-Danaf
    • M. S. Soliman

    OriginalPaper 25 April 2016 Pages: 2432 - 2444

    

39. Inclusions and Microstructure of Ce-Added Weld Metal Coarse Grain Heat-Affected Zone in Twin-Wire Submerged-Arc Welding

    • S. F. Yu
    • N. Yan
    • Y. Chen

    OriginalPaper 26 April 2016 Pages: 2445 - 2453

    

40. Use of Acoustic Emission During Scratch Testing for Understanding Adhesion Behavior of Aluminum Nitride Coatings

    • R. K. Choudhary
    • P. Mishra

    OriginalPaper 27 April 2016 Pages: 2454 - 2461

    

41. Optimization of Fiber Laser Welding of DP980 Steels Using RSM to Improve Weld Properties for Formability

    • K. Bandyopadhyay
    • S. K. Panda
    • P. Saha

    OriginalPaper 28 April 2016 Pages: 2462 - 2477

    

42. Single Point Incremental Forming of an Aged AL-Cu-Mg Alloy: Influence of Pre-heat Treatment and Warm Forming

    • Amirahmad Mohammadi
    • Ling Qin
    • Joost R. Duflou

    OriginalPaper 21 April 2016 Pages: 2478 - 2488

    

43. The Microstructure Evolution and Processing Map of Ni-18.3Cr-6.4Co-5.9W-4Mo Superalloy During Hot Deformation

    • Shengxue Qin
    • Jie Liu
    • Kaifeng Zhang

    OriginalPaper 05 May 2016 Pages: 2489 - 2499

    

44. Tungsten Carbide Grain Size Computation for WC-Co Dissimilar Welds

    • Dongran Zhou
    • Haichao Cui
    • Fenggui Lu

    OriginalPaper 06 May 2016 Pages: 2500 - 2510

    

45. Microstructure and Mechanism of Strengthening of Microalloyed Pipeline Steel: Ultra-Fast Cooling (UFC) Versus Laminar Cooling (LC)

    • J. Zhao
    • X. Wang
    • R. D. K. Misra

    OriginalPaper 06 May 2016 Pages: 2511 - 2520

    

46. Formation and Microstructure of Ultrafine-Grained Titanium Processed by Multi-Directional Forging

    • Bingfeng Wang
    • Xiaoyan Wang
    • Juan Li

    OriginalPaper 10 May 2016 Pages: 2521 - 2527

    

47. Production Process of Biocompatible Magnesium Alloy Tubes Using Extrusion and Dieless Drawing Processes

    • Piotr Kustra
    • Andrij Milenin
    • Tsuyoshi Furushima

    OriginalPaper 10 May 2016 Pages: 2528 - 2535

    

48. 3D Finite Element Analysis of Spider Non-isothermal Forging Process

    • Ling Niu
    • Wei Wei
    • Jing Hu

    OriginalPaper 10 May 2016 Pages: 2536 - 2541

    

49. Microstructural Characteristics and Mechanical Properties of 7050-T7451 Aluminum Alloy Friction Stir-Welded Joints

    • L. Zhou
    • T. Wang
    • J. C. Feng

    OriginalPaper 11 May 2016 Pages: 2542 - 2550

    

50. Effect of Variants of Thermomechanical Working and Annealing Treatment on Titanium Alloy Ti6Al4V Closed Die Forgings

    • R. K. Gupta
    • V. Anil Kumar
    • P. Ram Kumar

    OriginalPaper 12 May 2016 Pages: 2551 - 2562