Metallurgical factors affecting fracture toughness of aluminum alloys G. T. HahnA. R. Rosenfield OriginalPaper Pages: 653 - 668
Discussion of “metallurgical factors affecting fracture toughness of aluminum alloys” R. H. van StoneJ. A. Psioda OriginalPaper Pages: 668 - 670
Metallurgical factors affecting high strength aluminum alloy production David S. Thompson OriginalPaper Pages: 671 - 683
Powder metallurgy approach for control of microstructure and properties in high strength aluminum alloys J. P. LyleW. S. Cebulak OriginalPaper Pages: 685 - 699
200, 020, and 002 X-ray peaks in tempered Fe-18 Ni-C martensites V. G. VeeraraghavanP. G. Winchell OriginalPaper Pages: 701 - 705
Slow crack growth in ceramic materials at elevated temperatures A. G. EvansL. R. RussellD. W. Richerson OriginalPaper Pages: 707 - 716
Dislocation configurations developed during carburization of nickel John K. BoahP. G. Winchell OriginalPaper Pages: 717 - 724
Investigation of reported anomalies in the electrotransport of interstitial solutes in titanium and iron O. N. CarlsonF. A. SchmidtR. R. Lichtenberg OriginalPaper Pages: 725 - 731
Instability of plastic flow in the directions of pure shear: I. Theory Amiya K. ChakrabartiJoseph W. Spretnak OriginalPaper Pages: 733 - 736
Instability of plastic flow in the directions of pure shear: II. Experimental Amiya K. ChakrabartiJoseph W. Spretnak OriginalPaper Pages: 737 - 747
Measurement of surface fatigue damage by exoelectron emission William J. Baxter OriginalPaper Pages: 749 - 754
Creep of udimet 500 during thermal cycling: I. The minimum creep rate I. WeissA. RosenD. G. Brandon OriginalPaper Pages: 761 - 766
Creep of udimet 500 during thermal cycling: II. The time to failure I. WeissA. RosenD. G. Brandon OriginalPaper Pages: 767 - 772
Formation of Fe3N, Fe4N and Fe16N2 on the surface of iron Y. InokutiN. NishidaN. Ōhashi OriginalPaper Pages: 773 - 784
The influence of hydrostatic pressure on the tensile deformation and fracture of copper Ian E. FrenchPaul F. Weinrich OriginalPaper Pages: 785 - 790
Kinetics of strain-induced martensitic nucleation G. B. OlsonMorris Cohen OriginalPaper Pages: 791 - 795
An acoustic emission investigation of microscopic ductile fracture William W. GerberichDavid G. AtteridgeJoseph F. Lessar OriginalPaper Pages: 797 - 801
The effect of low melting point phases on the elevated temperature microstructural stability of hot pressed beryllium Donald Webster OriginalPaper Pages: 803 - 808
Slip sources in the surface layers of polycrystalline Fe-3 pct Si in the early stages of deformation K. N. TandonK. Tangri OriginalPaper Pages: 809 - 813
Distribution of plastic strain and negative pressure in necked steel and copper bars A. S. ArgonJ. ImA. Needleman OriginalPaper Pages: 815 - 824
Cavity formation from inclusions in ductile fracture A. S. ArgonJ. ImR. Safoglu OriginalPaper Pages: 825 - 837
Separation of second phase particles in spheroidized 1045 steel, Cu-0.6pct Cr alloy, and maraging steel in plastic straining A. S. ArgonJ. Im OriginalPaper Pages: 839 - 851
Deformation mechanisms in commercial TI-5Al-2.5 Sn (0.5 At. pct Oeq) alloy at intermediate and high temperatures (0.3-0.6 tm) M. DönerH. Conrad OriginalPaper Pages: 853 - 861
Irradiation damage in a 2.2 pct magnesium-aluminum alloy R. T. KingA. Jostsons OriginalPaper Pages: 863 - 868
A mathematical model study of the influence of degree of mixing and powder particle size variation on the homogenization kinetics of compacted blends of powders M. S. MastellerR. W. HeckelR. F. Sekerka OriginalPaper Pages: 869 - 876
Effects of zinc coatings on the stress corrosion cracking and hydrogen embrittlement of low-alloy steel H. E. Townsend OriginalPaper Pages: 877 - 883
Creep-rupture behavior of iridium at elevated temperatures R. L. MehanE. C. DuderstadtE. H. Sayell OriginalPaper Pages: 885 - 889
Ternary dissolution kinetics in the Fe-Ni-P system A. S. NorkiewiczJ. I. Goldstein OriginalPaper Pages: 891 - 900
Microstructural analysis by high-voltage electron diffraction of severely drawn iron wires George LangfordMorris Cohen OriginalPaper Pages: 901 - 910
Influence of crystallography on aspects of solid-solid nucleation theory W. C. JohnsonC. L. WhiteH. I. Aaronson OriginalPaper Pages: 911 - 919
Creep behavior of Ni-W solid solutions Farghalli A. MohamedTerence G. Langdon Communication Pages: 927 - 928
The relationship between the size of cementite particles and the subgrain size in quenched-and-tempered steels L. AnandJ. Gurland Communication Pages: 928 - 931
On the stress-induced separation of partial dislocations T. MalisD. J. LloydK. Tangri Communication Pages: 932 - 934
Intersecting martensite plates in an Fe-27Ni-0.5C alloy D. S. SarmaS. R. Keown Communication Pages: 934 - 936
Influence of grain orientation on the dislocation substructure in austenitic stainless steel S. N. MonteiroH. -J. Kestenbach Communication Pages: 938 - 940
Tensile properties to 550°C and microstructures in quenched and aged Ti-6Al-2Sn-4Zr-6Mo alloy M. G. MendirattaJ. A. Roberson Communication Pages: 940 - 943
The influence of quenching on the segregation of magnesium to the grain boundaries in an Al-5.9 wt pct Zn-3.2 wt pct Mg alloy Peter DoigJeffrey W. Edington Communication Pages: 943 - 945
The strain-dependence of plastic strain ratio (rm value) of deep drawing sheet steels determined by simple tension test Hsun Hu Communication Pages: 945 - 947
Errata: Direct evidence for boron segregation to grain boundaries in a nickel-base alloy by secondary ion mass spectrometry J. M. WalshB. H. Rear Erratum Pages: 950 - 950