References
J. R. Low, Jr.:Trans. TMS-AIME, 1969, vol. 245, p. 2481.
B.A. Wilcox and A. Gilbert:Refractory Metals and Alloys IV, p. 95, Gordon and Breach, New York, 1967.
J. R. Low, Jr: inFracture in Engineering Materials, p. 127, ASM, 1964.
C. J. McMahon, Jr.:Temper Embrittlement in Steel, p. 127, STP no. 407, ASTM, Philadelphia, 1968.
I. Joshi and D.F. Stein:Met. Trans., 1970, vol. 1, p. 2544.
C. L. Smith and J. R. Low, Jr.:Met. Trans., 1974, vol. 5, p. 279.
R. J. Goode:Mater. Res. Stand., 1972, vol. 12, p. 31.
R. A. Wullaert:Impact Testing of Metals, p. 148, STP no. 466, ASTM, Philadelphia, 1970.
D. F. Stein, A. Joshi, and R. P. LaForce:Trans. ASM, 1969, vol. 62, p. 776.
D. F. Stein, R. E. Weber, and P. W. Palmberg:J. Metals, 1971, vol. 23, no. 3, p. 39.
T. W. Haas, J. T. Grant, and G. J. Dooley, III:J. Appl. Phys., 1972, vol. 43, p. 1853.
D. Kalish and H. J. Rack:Met. Trans., 1971, vol. 2, p. 2665.
F. J. Witt: USAEC Report ORNL-TM-3172, Oak Ridge National Laboratory.
H. J. Rack and R. W. Newman: inPhysical Metallurgy, 2nd ed., R. W. Cahn, ed., chapt. 12, North Holland Pub. Co., Inc., Amsterdam, 1970.
Author information
Authors and Affiliations
Additional information
Work supported by the U.S. Atomic Energy Commission.
Rights and permissions
About this article
Cite this article
Rack, H.J. Grain boundary embrittlement in a beta titanium alloy. Metall Trans A 6, 947–949 (1975). https://doi.org/10.1007/BF02672327
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02672327