Formation of copper deposits under electrolysis with surface-active agents I. B. MurashovaN. E. AgarovaL. M. Yakovleva Theory, Manufacturing Technology, and Properties of Powders and Fibers 11 June 2010 Pages: 1 - 7
Modeling the effective elastic properties of materials pressed from a unidirectional hexagonal fiber strand V. G. Borovik Theory and Technology of Forming Process 11 June 2010 Pages: 8 - 16
Sintering stability of biporous materials under kinematic constraints M. B. ShternA. V. Kuz’movE. Olevskii Theory and Technology of Sintering, Thermal and Chemicothermal Treatment 11 June 2010 Pages: 17 - 23
Direct multiscale modeling of diffusion sintering of ceramic composites A. L. Maksimenko OriginalPaper 11 June 2010 Pages: 24 - 30
Effects of microwave heating in nanostructured ceramic materials Yu. V. BykovS. V. EgorovA. A. Sorokin OriginalPaper 11 June 2010 Pages: 31 - 41
Sintering of self-reinforced ceramics in the ZrO2–Y2O3–CeO2–Al2O3 system A. V. ShevchenkoE. V. DudnikL. M. Lopato OriginalPaper 11 June 2010 Pages: 42 - 49
Thermal stability of nanosized composite C–Cu films A. A. OnoprienkoN. I. Danilenko Nanostructured Materials 11 June 2010 Pages: 50 - 54
Spark-deposited coatings on magnesium alloys I. A. PodchernyaevaA. D. PanasyukV. N. Talash Sintered Metals and Alloys 11 June 2010 Pages: 55 - 60
Abrasive wear resistance of detonation coatings from mechanochemically alloyed Ti–Al–B powders V. E. OlikerV. L. SirovatkaT. Ya. Gridasova OriginalPaper 11 June 2010 Pages: 61 - 65
Structurization of (AlN–TiN)–(Ni–Cr)–(TiN–Cr3C2) composite ceramics under concentrated solar radiation V. G. KayukO. N. Grigor’evT. V. Mosina Refractory and Ceramic Materials 11 June 2010 Pages: 66 - 70
The Al2O3–HfO2–Y2O3 phase diagram. III. Solidus surface and phase equilibria in crystallization of alloys S. M. LakizaYa. S. TishchenkoL. M. Lopato Physicochemical Materials Research 11 June 2010 Pages: 71 - 78
The Al–Cu–Ir isothermal section at 800°C in the aluminum-rich range D. O. KapushB. GrushkoT. Ya. Velikanova OriginalPaper 11 June 2010 Pages: 79 - 85
Manganese-like metastable phases in the Fe–Mo system: experimental study and thermodynamic modeling. I. Crystalline state of Fe–Mo melt-spinning alloys T. A. VelikanovaM. V. KarpetsM. A. Turchanin OriginalPaper 11 June 2010 Pages: 86 - 93
Interaction of Ti–6 wt.% Si alloy with tissue fluid: experimental modeling V. A. LavrenkoV. N. TalashM. A. Krasovskii OriginalPaper 11 June 2010 Pages: 94 - 98
Microstructure and conductivity of hot-pressed Si3N4–TiO2 (TiH2) composites cooled at different rates I. V. ChernyakovaS. N. ZdolnikV. Ya. Petrovskii Structural Materials Research 11 June 2010 Pages: 99 - 109
Confinement and aspiration of dust and gas in the production of atomized copper powders O. D. NeikovG. I. Vasil’evaV. G. Tokhtuev Powder Metallurgy Industry and Managerial Economics 11 June 2010 Pages: 110 - 115
Effect of warm pressing on the mechanical properties and structure of green compacts of heterogeneous copper-based powder T. A. EpifantsevaV. G. KayukO. V. Mikhailov Exchange of Experience 11 June 2010 Pages: 116 - 123