1. Preface to the special issue: Processing bulk nanostructured materials

   • Megumi Kawasaki
   • Praveen Kumar

   Editorial 23 March 2024 Pages: 5647 - 5650

   

2. Review: recent advances using severe plastic deformation to improve the properties of battery materials

   • Mohammad Zohrevand
   • Nafiseh Hassanzadeh
   • Terence G. Langdon

   Processing Bulk Nanostructured Materials 20 December 2023 Pages: 5651 - 5680

   

3. Review: nanoSPD-produced metallic materials for advanced medical devices

   • Ruslan Z. Valiev
   • Yufeng Zheng
   • Kaveh Edalati

   Processing Bulk Nanostructured Materials 28 February 2024 Pages: 5681 - 5697

   

4. Multi-scale investigation of microstructure and texture evolution during equal channel angular pressing of silver

   • Satyam Suwas
   • Werner Skrotzki
   • Heinz-Günter Brokmeier

   Processing Bulk Nanostructured Materials Open access 18 January 2024 Pages: 5698 - 5716

   

5. Effect of Sc addition on evolution of microstructure, texture and strength of high-pressure torsion-processed AA2195 Al–Li alloy

   • Soumita Mondal
   • K. G. Raghavendra
   • Satyam Suwas

   Processing Bulk Nanostructured Materials 29 March 2024 Pages: 5717 - 5735

   

6. Effect of Zr micro-alloying on microstructure refinement and mechanical property of CoCrNi medium-entropy alloy processed by high-pressure torsion and subsequent annealing

   • Bhukya Devendar Singh Rathod
   • Reza Gholizadeh
   • Nobuhiro Tsuji

   Processing Bulk Nanostructured Materials 31 December 2023 Pages: 5736 - 5753

   

7. Strengthening of A5052 aluminum alloy by high-pressure sliding process

   • Ahmad Muhammad Aziz
   • Intan Fadhlina Mohamed
   • Ammar Abdulkareem Hashim Al-Ameri

   Processing Bulk Nanostructured Materials 08 February 2024 Pages: 5754 - 5770

   

8. Effect of pre-annealing on the formation of the ω-phase in the Ti-2 wt%V alloy after high-pressure torsion

   • G. S. Davdian
   • A. S. Gornakova
   • A. I. Tyurin

   Processing Bulk Nanostructured Materials 16 February 2024 Pages: 5771 - 5786

   

9. High-resolution electron microscopy study of particle dispersion and precipitation in a nanostructured Al–2%Fe alloy

   • Jorge M. Cubero-Sesin
   • Masashi Watanabe
   • Zenji Horita

   Processing Bulk Nanostructured Materials 01 April 2024 Pages: 5787 - 5804

   

10. Diffusion in ultra-fine-grained CoCrFeNiMn high entropy alloy processed by equal-channel angular pressing

    • Yao Jiang
    • Yuwei Liu
    • Gerhard Wilde

    Processing Bulk Nanostructured Materials Open access 21 February 2024 Pages: 5805 - 5817

    

11. Decrease of steady-state solubility of Ag in Cu by high-pressure torsion at low temperature

    • B. B. Straumal
    • A. R. Kilmametov
    • A. A. Mazilkin

    Processing Bulk Nanostructured Materials 21 January 2024 Pages: 5818 - 5830

    

12. Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study

    • Klaus-Dieter Liss
    • Jae-Kyung Han
    • Megumi Kawasaki

    Processing Bulk Nanostructured Materials Open access 17 January 2024 Pages: 5831 - 5853

    

13. Strain-rate sensitivity maps and the estimation of ductility for low temperature superplasticity

    • Roberto B. Figueiredo

    Processing Bulk Nanostructured Materials 22 February 2024 Pages: 5854 - 5871

    

14. Effect of processing Mg–6Zn–0.2Ce through high-pressure torsion on its use as a biomaterial

    • Lochan Upadhayay
    • Sagar Nilawar
    • Praveen Kumar

    Processing Bulk Nanostructured Materials 02 March 2024 Pages: 5872 - 5890

    

15. Influence of grain refinement via high-pressure torsion on corrosion behavior of medium- and high-entropy alloys CoCrFeNi and CoCrFeMnNi with various chromium contents

    • Naoki Hata
    • Motohiro Yuasa
    • Kaveh Edalati

    Processing Bulk Nanostructured Materials 12 March 2024 Pages: 5891 - 5905

    

16. Long term hydrogen storage properties of ZK60 Mg-alloy as processed by different methods of SPD

    • P. Cengeri
    • Y. Kimoto
    • E. Schafler

    Processing Bulk Nanostructured Materials Open access 13 April 2024 Pages: 5906 - 5922

    

17. Effect of Mg content on mechanical properties and electrical conductivity of ultrafine-grained Al–Mg–Zr wires produced by ECAP-Conform and drawing

    • Maxim Yu Murashkin
    • Dinislam I. Sadykov
    • Nariman A. Enikeev

    Processing Bulk Nanostructured Materials 16 February 2024 Pages: 5923 - 5943

    

18. Increasing strength and electrical conductivity of Cu-0.77%Cr-0.86%Hf alloy by rotary swaging and subsequent aging

    • N. Martynenko
    • O. Rybalchenko
    • B. Straumal

    Processing Bulk Nanostructured Materials 27 January 2024 Pages: 5944 - 5955

    

19. Influence of microstructure on exchange bias in Ni–NiO composites

    • M. Zawodzki
    • H. Krenn
    • A. Bachmaier

    Processing Bulk Nanostructured Materials 09 January 2024 Pages: 5956 - 5967

    

20. Correlation between microstructure, magnetic properties and mechanical behavior of the Permimphy alloy after high-pressure torsion

    • Oussama Dabou
    • Thierry Baudin
    • Terence G. Langdon

    Processing Bulk Nanostructured Materials 09 March 2024 Pages: 5968 - 5980

    

21. Achieving high-T_c superconductivity in Magnéli phase based on Ti oxides: prediction by machine learning and material synthesis by high-pressure torsion processing

    • Masaki Mito
    • Narimichi Mokutani
    • Zenji Horita

    Processing Bulk Nanostructured Materials 15 February 2024 Pages: 5981 - 5994

    

22. Mechanism of anatase-to-columbite TiO₂ phase transformation via sheared phases: first-principles calculations and high-pressure torsion experiments

    • Jacqueline Hidalgo-Jiménez
    • Taner Akbay
    • Kaveh Edalati

    Processing Bulk Nanostructured Materials 11 December 2023 Pages: 5995 - 6007

    

23. X-ray line profile analysis study on the evolution of the microstructure in additively manufactured 316L steel during severe plastic deformation

    • Jenő Gubicza
    • Megumi Kawasaki
    • Moustafa El-Tahawy

    Processing Bulk Nanostructured Materials Open access 30 October 2023 Pages: 6008 - 6023

    

24. Improving density and strength-to-ductility ratio of a 3D-printed Al–Si alloy by high-pressure torsion

    • Jairo Alberto Muñoz
    • Alexander Komissarov
    • José María Cabrera

    Processing Bulk Nanostructured Materials Open access 19 January 2024 Pages: 6024 - 6047

    

25. Uniform strain high-pressure torsion (US-HPT): an approach to reduce strain gradients

    • A. Hohenwarter
    • S. Wurster

    Processing bulk nanostructured materials Open access 03 December 2023 Pages: 6048 - 6058

    

26. The mechanics of the friction-assisted lateral extrusion process

    • László S. Tóth
    • Máté Sepsi
    • Terry C. Lowe

    Processing Bulk Nanostructured Materials Open access 25 January 2024 Pages: 6059 - 6074

    

27. An experimental and crystal plasticity simulation study on kink band-assisted grain fragmentation during high-pressure torsion of (CrFeNi)₉₉Si₁ medium-entropy alloy

    • Swati Mahato
    • Shirish Chandrakar
    • Nilesh P. Gurao

    Processing Bulk Nanostructured Materials 26 December 2023 Pages: 6075 - 6096

    

28. Atomistic modeling of idealized equal channel angular pressing process

    • Aruna Prakash

    Processing Bulk Nanostructured Materials Open access 27 February 2024 Pages: 6097 - 6114

    

29. On the optimisation of phase fractions in harmonic structure materials

    • Abdallah Shokry
    • Per Ståhle
    • Dmytro Orlov

    Processing Bulk Nanostructured Materials Open access 02 March 2024 Pages: 6115 - 6133