Advertisement

Machine Learning–Based Reduce Order Crystal Plasticity Modeling for ICME Applications

  • Mengfei Yuan
  • Sean Paradiso
  • Bryce Meredig
  • Stephen R. Niezgoda
Technical Article
  • 50 Downloads

Abstract

Crystal plasticity simulation is a widely used technique for studying the deformation processing of polycrystalline materials. However, inclusion of crystal plasticity simulation into design paradigms such as integrated computational materials engineering (ICME) is hindered by the computational cost of large-scale simulations. In this work, we present a machine learning (ML) framework using the material information platform, Open Citrination, to develop and calibrate a reduced order crystal plasticity model for face-centered cubic (FCC) polycrystalline materials, which can be both rapidly exercised and easily inverted. The reduced order model takes crystallographic texture, constitutive model parameters, and loading condition as inputs and returns the stress-strain curve and final texture. The model can also be inverted and take a stress-strain curve, loading condition, and final texture as inputs and return the initial texture and constitutive model parameters as outputs. Principal component analysis (PCA) is used to develop an efficient description of the crystallographic texture. A viscoplastic self-consistent (VPSC) crystal plasticity solver is used to create the training data by modeling the stress-strain behavior and evolution of texture during deformation processing.

Keywords

Reduced order model Microstructure quantification Machine learning Crystal plasticity Dimensionality reduction Parameter optimization 

Notes

Funding Information

The authors received financial support from the U.S. Department of Energy National Energy Technology Laboratory award DE-FE0027776 and DARPA Young Faculty Award grant D15AP00103 .

Compliance with Ethical Standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Allison J (2011) Integrated computational materials engineering: a perspective on progress and future steps. JOM 63(4):15CrossRefGoogle Scholar
  2. 2.
    Agrawal A, Choudhary A (2016) Perspective: Materials informatics and big data: realization of the ”fourth paradigm” of science in materials science. Apl Materials 4(5):053208CrossRefGoogle Scholar
  3. 3.
    Olson GB (1997) Computational design of hierarchically structured materials. Science 277(5330):1237CrossRefGoogle Scholar
  4. 4.
    Panchal JH, Kalidindi SR, McDowell DL (2013) Key computational modeling issues in integrated computational materials engineering. Comput Aided Des 45(1):4CrossRefGoogle Scholar
  5. 5.
    Asaro RJ (1983) Crystal plasticity. J Appl Mech 50(4b):921CrossRefGoogle Scholar
  6. 6.
    Lebensohn R, Tomé C (1994) A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals. Mater Sci Eng A 175(1-2):71CrossRefGoogle Scholar
  7. 7.
    Lebensohn R, Tomé C, Castaneda PP (2007) Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations. Philos Mag 87(28):4287CrossRefGoogle Scholar
  8. 8.
    Tomé C, Lebensohn R (2007) Visco-plastic self-consistent (vpsc), Los Alamos National Laboratory (USA) and Universidad Nacional de Rosario (Argentina) 6Google Scholar
  9. 9.
    Jia N, Peng RL, Wang Y, Johansson S, Liaw P (2008) Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling. Acta Mater 56(4):782CrossRefGoogle Scholar
  10. 10.
    Wang H, Wu P, Tomé C, Huang Y (2010) A finite strain elastic–viscoplastic self-consistent model for polycrystalline materials. J Mech Phys Solids 58(4):594CrossRefGoogle Scholar
  11. 11.
    Anglin B, Gockel B, Rollett A (2016) Developing constitutive model parameters via a multi-scale approach. Integr Mater Manuf Innov 5(1):11CrossRefGoogle Scholar
  12. 12.
    Aguir H, BelHadjSalah H, Hambli R (2011) Parameter identification of an elasto-plastic behaviour using artificial neural networks–genetic algorithm method. Mater Des 32(1):48CrossRefGoogle Scholar
  13. 13.
    Aguir H, Chamekh A, BelHadjSalah H, Dogui A, Hambli R (2008) Identification of constitutive parameters using hybrid ann multi-objective optimization procedure. Int J Mater Form 1(1):1CrossRefGoogle Scholar
  14. 14.
    White A (2012) The materials genome initiative: one year on. MRS Bull 37(08):715CrossRefGoogle Scholar
  15. 15.
    O’Mara J, Meredig B, Michel K (2016) Materials data infrastructure: a case study of the citrination platform to examine data import, storage, and access. JOM 68(8):2031CrossRefGoogle Scholar
  16. 16.
    Taylor GI (1938) Plastic strain in metals, our. Inst Metals 62:307Google Scholar
  17. 17.
    Hill R (1965) A self-consistent mechanics of composite materials. Journal of the Mechanics and Physics of Solids 13(4):213CrossRefGoogle Scholar
  18. 18.
    Anand L, Kothari M (1996) A computational procedure for rate-independent crystal plasticity. J Mech Phys Solids 44(4):525CrossRefGoogle Scholar
  19. 19.
    Roters F, Eisenlohr P, Hantcherli L, Tjahjanto DD, Bieler TR, Raabe D (2010) Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications. Acta Mater 58(4):1152CrossRefGoogle Scholar
  20. 20.
    Molinari A, Canova G, Ahzi S (1987) A self consistent approach of the large deformation polycrystal viscoplasticity. Acta Metall 35(12):2983CrossRefGoogle Scholar
  21. 21.
    Segurado J, Lebensohn RA, LLorca J, Tomé CN (2012) Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements. Int J Plast 28(1):124CrossRefGoogle Scholar
  22. 22.
    Proust G, Kalidindi SR (2006) Procedures for construction of anisotropic elastic–plastic property closures for face-centered cubic polycrystals using first-order bounding relations. J Mech Phys Solids 54(8):1744CrossRefGoogle Scholar
  23. 23.
    Liu B, Raabe D, Roters F, Eisenlohr P, Lebensohn R (2010) Comparison of finite element and fast fourier transform crystal plasticity solvers for texture prediction. Model Simul Mater Sci Eng 18(8):085005CrossRefGoogle Scholar
  24. 24.
    Lebensohn RA (2001) N-site modeling of a 3d viscoplastic polycrystal using fast fourier transform. Acta Mater 49(14):2723CrossRefGoogle Scholar
  25. 25.
    Lebensohn RA, Rollett AD, Suquet P (2011) Fast fourier transform-based modeling for the determination of micromechanical fields in polycrystals. JOM 63(3):13CrossRefGoogle Scholar
  26. 26.
    Eshelby JD (1957) The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc R Soc Lond A 241(1226):376CrossRefGoogle Scholar
  27. 27.
    Eshelby JD (1959) The elastic field outside an ellipsoidal inclusion. Proc R Soc Lond A 252(1271):561CrossRefGoogle Scholar
  28. 28.
    Van Houtte P (1994) Application of plastic potentials to strain rate sensitive and insensitive anisotropic materials. Int J Plast 10(7):719CrossRefGoogle Scholar
  29. 29.
    Kalidindi SR, Duvvuru HK, Knezevic M (2006) Spectral calibration of crystal plasticity models. Acta Mater 54(7):1795CrossRefGoogle Scholar
  30. 30.
    Raabe D, Roters F (2004) Using texture components in crystal plasticity finite element simulations. Int J Plast 20(3):339CrossRefGoogle Scholar
  31. 31.
    Kocks UF, Tomé CN (2000) HR Wenk Texture and anisotropy: preferred orientations in polycrystals and their effect on materials properties. Cambridge University Press, CambridgeGoogle Scholar
  32. 32.
    Kalidindi SR, Bronkhorst CA, Anand L (1992) Crystallographic texture evolution in bulk deformation processing of fcc metals. J Mech Phys Solids 40(3):537CrossRefGoogle Scholar
  33. 33.
    Hielscher R, Schaeben H (2008) A novel pole figure inversion method: specification of the mtex algorithm. J Appl Crystallogr 41(6):1024CrossRefGoogle Scholar
  34. 34.
    Bachmann F, Hielscher R, Schaeben H (2010) In solid state phenomena. Trans Tech Publ 160:63–68Google Scholar
  35. 35.
    Mainprice D, Hielscher R, Schaeben H (2011) Calculating anisotropic physical properties from texture data using the mtex open-source package. Geol Soc Lond Spec Publ 360(1):175CrossRefGoogle Scholar
  36. 36.
    Bunge HJ (2013) Texture analysis in materials science: mathematical methods. Elsevier, AmsterdamGoogle Scholar
  37. 37.
    Adams BL, Henrie A, Henrie B, Lyon M, Kalidindi S, Garmestani H (2001) Microstructure-sensitive design of a compliant beam. J Mech Phys Solids 49(8):1639CrossRefGoogle Scholar
  38. 38.
    Adams BL, Gao XC, Kalidindi SR (2005) Finite approximations to the second-order properties closure in single phase polycrystals. Acta Mater 53(13):3563CrossRefGoogle Scholar
  39. 39.
    Sundararaghavan V, Zabaras N (2005) Classification and reconstruction of three-dimensional microstructures using support vector machines. Comput Mater Sci 32(2):223CrossRefGoogle Scholar
  40. 40.
    Sundararaghavan V, Zabaras N (2004) A dynamic material library for the representation of single-phase polyhedral microstructures. Acta Mater 52(14):4111CrossRefGoogle Scholar
  41. 41.
    Sundararaghavan V, Zabaras N (2008) A multi-length scale sensitivity analysis for the control of texture-dependent properties in deformation processing. Int J Plast 24(9):1581CrossRefGoogle Scholar
  42. 42.
    Fullwood DT, Niezgoda SR, Adams BL, Kalidindi SR (2010) Microstructure sensitive design for performance optimization. Prog Mater Sci 55(6):477CrossRefGoogle Scholar
  43. 43.
    Kalidindi SR, Houskamp JR, Lyons M, Adams BL (2004) Microstructure sensitive design of an orthotropic plate subjected to tensile load. Int J Plast 20(8):1561CrossRefGoogle Scholar
  44. 44.
    Niezgoda SR, Yabansu YC, Kalidindi SR (2011) Understanding and visualizing microstructure and microstructure variance as a stochastic process. Acta Mater 59(16):6387CrossRefGoogle Scholar
  45. 45.
    Niezgoda SR, Kanjarla AK, Kalidindi SR (2013) Novel microstructure quantification framework for databasing, visualization, and analysis of microstructure data. Integr Mater Manuf Innov 2(1):1CrossRefGoogle Scholar
  46. 46.
    Galbincea ND, Yuan M, Niezgoda SR (2017) Computational design tools for quantifying uncertainty due to material variability. In: 19th AIAA non-deterministic approaches conference, p 0816Google Scholar
  47. 47.
    Fukunaga K (2013) Introduction to statistical pattern recognition. Academic Press, CambridgeGoogle Scholar
  48. 48.
    Johnson RA, Wichern D (2002) Multivariate analysis. Wiley Online Library, New YorkGoogle Scholar
  49. 49.
    Ghodsi A (2006) Dimensionality reduction a short tutorial. In: Department of Statistics and Actuarial Science, Univ of Waterloo, Ontario, Canada, vol 37, p 38Google Scholar
  50. 50.
    Maaten Lvd, Hinton G (2008) Visualizing data using t-sne. J Mach Learn Res 9:2579Google Scholar
  51. 51.
    Wattenberg M, Viégas F, Johnson I (2016) How to use t-sne effectively. Distill 1(10):e2CrossRefGoogle Scholar
  52. 52.
    Schölkopf B, Smola A, Müller KR (1998) Nonlinear component analysis as a kernel eigenvalue problem. Neural Comput 10(5):1299CrossRefGoogle Scholar
  53. 53.
    Ma X, Zabaras N (2011) Kernel principal component analysis for stochastic input model generation. J Comput Phys 230(19):7311CrossRefGoogle Scholar
  54. 54.
    Ringnér M (2008) What is principal component analysis?. Nat Biotechnol 26(3):303CrossRefGoogle Scholar
  55. 55.
    Abdi H, Williams LJ (2010) Principal component analysis. Wiley Interdiscip Rev Comput Stat 2(4):433CrossRefGoogle Scholar
  56. 56.
    Shlens J (2014) A tutorial on principal component analysis. arXiv:1404.1100
  57. 57.
    Kalidindi SR, Niezgoda SR, Salem AA (2011) Microstructure informatics using higher-order statistics and efficient data-mining protocols. JOM 63(4):34CrossRefGoogle Scholar
  58. 58.
    Sundararaghavan V, Zabaras N (2009) A statistical learning approach for the design of polycrystalline materials. Statistical Analysis and Data Mining 1(5):306CrossRefGoogle Scholar
  59. 59.
    Pilania G, Wang C, Jiang X, Rajasekaran S, Ramprasad R (2013) Accelerating materials property predictions using machine learning. Sci Rep 3:2810CrossRefGoogle Scholar
  60. 60.
    Meredig B, Agrawal A, Kirklin S, Saal JE, Doak J, Thompson A, Zhang K, Choudhary A, Wolverton C (2014) Combinatorial screening for new materials in unconstrained composition space with machine learning. Phys Rev B 89(9):094104CrossRefGoogle Scholar
  61. 61.
    Schütt K, Glawe H, Brockherde F, Sanna A, Müller K, Gross E (2014) How to represent crystal structures for machine learning: towards fast prediction of electronic properties. Phys Rev B 89(20):205118CrossRefGoogle Scholar
  62. 62.
    Robert C (2014) Machine learning a probabilistic perspectiveGoogle Scholar
  63. 63.
    Nasrabadi NM (2007) Pattern recognition and machine learning. J Electron Imaging 16(4):049901CrossRefGoogle Scholar
  64. 64.
    Goldberg DE, Holland JH (1988) Genetic algorithms and machine learning. Mach Learn 3(2):95CrossRefGoogle Scholar
  65. 65.
    Pedregosa F, Varoquaux G, Gramfort A, Michel V, Thirion B, Grisel O, Blondel M, Prettenhofer P, Weiss R, Dubourg V et al (2011) Scikit-learn: machine learning in python. J Mach Learn Res 12(Oct):2825Google Scholar
  66. 66.
    Demuth H, Beale M (1993) Neural network toolbox for use with matlab – user’s guide verion 3.0Google Scholar
  67. 67.
    Hill J, Mannodi-Kanakkithodi A, Ramprasad R, Meredig B (2018) Materials science with large-scale data and informatics: unlocking new opportunities. In: Computational materials system design. Springer, pp 193–225Google Scholar
  68. 68.
    Ling J, Hutchinson M, Antono E, Paradiso S, Meredig B (2017) High-dimensional materials and process optimization using data-driven experimental design with well-calibrated uncertainty estimates. Integr Mater Manuf Innov 6(3):207CrossRefGoogle Scholar
  69. 69.
    Breiman L (2001) Random forests. Mach Learn 45(1):5CrossRefGoogle Scholar
  70. 70.
    Liaw A, Wiener M, et al (2002) Classification and regression by randomforest. R news 2(3):18Google Scholar
  71. 71.
    Hutchinson M, Paradiso S lolo https://githubcom/CitrineInformatics/lolo
  72. 72.
    Citrine informatics https://citrinationcom Accessed: 2018-11-01

Copyright information

© The Minerals, Metals & Materials Society 2018

Authors and Affiliations

  • Mengfei Yuan
    • 1
  • Sean Paradiso
    • 2
  • Bryce Meredig
    • 3
  • Stephen R. Niezgoda
    • 1
    • 4
  1. 1.Department of Materials Science and EngineeringThe Ohio State UniversityColumbusUSA
  2. 2.Scientific Software EngineerCitrine InformaticsRedwood CityUSA
  3. 3.CSOCitrine InformaticsRedwood CityUSA
  4. 4.Department of Mechanical and Aerospace EngineeringThe Ohio State UniversityColumbusUSA

Personalised recommendations