Abstract
As a relatively new computational method, the weak-form quadrature element method (QEM) has attracted more and more worldwide attention recently. However, there exist different formulations, even different names, for the QEM in the literature. To remove possible confusion caused by them, a comparative review is carried out in this paper. The step-by-step procedure of the formulations is examined in detail by a simple one-dimensional bar element, and the nature of each step is revealed carefully. Similarities and differences between the different formulations are summarized after the scrutiny. Based on the full understanding of the QEM, a comprehensive assessment of the method is conducted by comparing several relevant aspects. Superiorities and limitations of the QEM are discussed and its future research directions are pointed out. Finally, a chronological list of research papers related to the QEM since 2017 is presented. State-of-the-art developments and applications of the method are highlighted.
Similar content being viewed by others
References
Striz AG, Chen WL, Bert CW (1994) Static analysis of structures by the quadrature element method (QEM). Int J Solids Struct 31:2807–2818
Shu C (2000) Differential quadrature and its application in engineering. Springer, London
Tornabene F, Fantuzzi N, Ubertini F, Viola E (2015) Strong formulation finite element method based on differential quadrature: a survey. Appl Mech Rev 67:020801
Wang X (2015) Differential quadrature and differential quadrature based element methods: theory and applications. Butterworth-Heinemann, Oxford
Striz AG, Chen WL, Bert CW (1995) High-accuracy plane stress and plate elements in the quadrature element method. In: 36th structures, structural dynamics and materials conference, New Orleans, pp 957–965
Chen WL, Striz AG, Bert CW (2000) High-accuracy plane stress and plate elements in the quadrature element method. Int J Solids Struct 37:627–647
Striz AG, Chen WL, Bert CW (1997) Free vibration of plates by the high accuracy quadrature element method. J Sound Vib 202:689–702
Zhong H, Yu T (2007) Flexural vibration analysis of an eccentric annular Mindlin plate. Arch Appl Mech 77:185–195
Zhong H, Yu T (2009) A weak form quadrature element method for plane elasticity problems. Appl Math Model 33:3801–3814
Xing Y, Liu B (2009) High-accuracy differential quadrature finite element method and its application to free vibrations of thin plate with curvilinear domain. Int J Numer Methods Eng 80:1718–1742
Xing Y, Liu B, Liu G (2010) A differential quadrature finite element method. Int J Appl Mech 2:207–227
Jin C, Wang X, Ge L (2014) Novel weak form quadrature element method with expanded Chebyshev nodes. Appl Math Lett 34:51–59
Wang X, Yuan Z, Jin C (2020) A general integration scheme in quadrature element method. Appl Math Lett 105:106305
Shojaei MF, Ansari R (2017) Variational differential quadrature: a technique to simplify numerical analysis of structures. Appl Math Model 49:705–738
Wang X, Yuan Z, Jin C (2017) Weak form quadrature element method and its applications in science and engineering: a state-of-the-art review. Appl Mech Rev 69:030801
Patera AT (1984) A spectral element method for fluid dynamics: laminar flow in a channel expansion. J Comput Phys 54:468–488
Pozrikidis C (2014) Introduction to finite and spectral element methods using MATLAB, 2nd edn. CRC Press, Boca Raton
Houbolt JC (1958) A study of several aerothermoelastic problems of aircraft structures in high-speed flight. Dissertation, Swiss Federal Institute of Technology
Varga RS (1962) Matrix iterative analysis. Prentice-Hall, Englewood Cliffs
Bushnell D, Almroth BO, Brogan F (1971) Finite-difference energy method for nonlinear shell analysis. Comput Struct 1:361–387
Zhong H, Gao M (2010) Quadrature element analysis of planar frameworks. Arch Appl Mech 80:1391–1405
Zhong H, Yue Z (2012) Analysis of thin plates by the weak form quadrature element method. Sci China Phys Mech Astron 55:861–871
Liao M, Chen F, Chen Z, Yang YB (2017) A weak-form quadrature element formulation for 3D beam elements used in nonlinear and postbuckling analysis of space frames. Eng Struct 145:34–43
Liao M, Xu G, Yang YB (2020) Geometrically nonlinear quadrature element analysis of spatial curved beams. Eng Struct 209:110004
Liu B, Xing Y, Wang W, Yu W (2015) Thickness-shear vibration analysis of circular quartz crystal plates by a differential quadrature hierarchical finite element method. Compos Struct 131:1073–1080
Ge M, Zhao Y, Huang Y, Ma W (2021) Static analysis of defective sandwich beam by Chebyshev quadrature element method. Compos Struct 261:113550
Ge M, Zhao Y, Huang Y, Ma W (2021) Bending analysis of simply-supported sandwich beam using Chebyshev quadrature element method. J Phys 1786:012003
Oh HS, Batra RC (1999) Locations of optimal stress points in higher-order elements. Commun Numer Methods Eng 15:127–136
Xu J, Zhong H (2015) Preliminary behavior analysis of curvilinear triangular quadrature elements. In: 1st international conference on information sciences, machinery, materials and energy, Chongqing, China, pp 285–288
Liu B, Lu S, Wu Y, Xing Y (2017) Three dimensional micro/macro-mechanical analysis of the interfaces of composites by a differential quadrature hierarchical finite element method. Compos Struct 176:654–663
Liu B, Liu C, Lu S, Wu Y, Xing Y, Ferreira AJM (2019) A differential quadrature hierarchical finite element method using Fekete points for triangles and tetrahedrons and its applications to structural vibration. Comput Methods Appl Mech Eng 349:798–838
Yuan S, Zhong H (2017) Finite deformation elasto-plastic consolidation analysis of soft clay by the weak form quadrature element method. J Zhejiang Univ-Sci A 18:942–957
You K, Zhong H, Engineering C (2017) (ISAEECE), Guangzhou, China, pp 35–39
Xu Z, Chen W (2017) Vibration analysis of plate with irregular cracks by differential quadrature finite element method. Shock Vibr 2017:2073453
Liu C, Liu B, Zhao L, Xing Y, Ma C, Li H (2017) A differential quadrature hierarchical finite element method and its applications to vibration and bending of Mindlin plates with curvilinear domains. Int J Numer Methods Eng 109:174–197
Liao M, Dong D (2018) An accurate and efficient approach coupling quadrature element method and subregion generalized variational principle for fatigue crack growth modelling. Theoret Appl Fract Mech 96:452–460
Liao M, Deng X, Guo Z (2018) Crack propagation modelling using the weak form quadrature element method with minimal remeshing. Theoret Appl Fract Mech 93:293–301
Hou H, He G (2018) Static and dynamic analysis of two-layer Timoshenko composite beams by weak-form quadrature element method. Appl Math Model 55:466–483
Fu C, Yang X (2018) Dynamic analysis of partial-interaction Kant composite beams by weak-form quadrature element method. Arch Appl Mech 88:2179–2198
Yuan S, Du J (2018) Upper bound limit analysis using the weak form quadrature element method. Appl Math Model 56:551–563
Yuan S, Du J (2018) Effective stress-based upper bound limit analysis of unsaturated soils using the weak form quadrature element method. Comput Geotech 98:172–180
Guan X, Tang J, Wang Q, Shuai C (2018) Application of the differential quadrature finite element method to free vibration of elastically restrained plate with irregular geometries. Eng Anal Boundary Elem 90:1–16
Zhang R, Zhong H (2018) A weak form quadrature element formulation for geometrically exact thin shell analysis. Comput Struct 202:44–59
Ou X, Zhang X, Zhang R, Yao X, Han Q (2018) Weak form quadrature element analysis on nonlinear bifurcation and post-buckling of cylindrical composite laminates. Compos Struct 188:266–277
Ou X, Yao X, Zhang R, Zhang X, Han Q (2018) Nonlinear dynamic response analysis of cylindrical composite stiffened laminates based on the weak form quadrature element method. Compos Struct 203:446–457
Wu Y, Xing Y, Liu B (2018) Analysis of isotropic and composite laminated plates and shells using a differential quadrature hierarchical finite element method. Compos Struct 205:11–25
Yuan S, Zhong H (2018) A composite quadrature element with unequal order integration for consolidation problems. J Zhejiang Univ-Sci A 19:521–533
Wang X, Yuan Z (2018) Three-dimensional vibration analysis of curved and twisted beams with irregular shapes of cross-sections by sub-parametric quadrature element method. Comput Math Appl 76:1486–1499
Zhou X, Huang K, Li Z (2018) Geometrically nonlinear beam analysis of composite wind turbine blades based on quadrature element method. Int J Non-Linear Mech 104:87–99
Wang X, Yuan Z (2018) A novel weak form three-dimensional quadrature element solution for vibrations of elastic solids with different boundary conditions. Finite Elem Anal Des 141:70–83
Xu S, Liu P (2019) Static and dynamic analysis of flexure hinge mechanisms using the weak-form quadrature element method. In: 2019 IEEE/ASME international conference on advanced intelligent mechatronics (AIM), Hong Kong, China
Hu Q, Hu X, Shen Z, Tao L, Tan Z (2019) Stability analysis of cylindrical shells resting on winkler elastic foundation using semi-analytical quadrature element method. Key Eng Mater 821:459–464
Wang X, Yuan Z, Jin C (2019) 3D free vibration analysis of multi-directional FGM parallelepipeds using the quadrature element method. Appl Math Model 68:383–404
Shen Z, Xia J, Cheng P (2019) Geometrically nonlinear dynamic analysis of FG-CNTRC plates subjected to blast loads using the weak form quadrature element method. Compos Struct 209:775–788
Liu B, Guo M, Liu C, Xing Y (2019) Free vibration of functionally graded sandwich shallow shells in thermal environments by a differential quadrature hierarchical finite element method. Compos Struct 225:111173
Deng J, Wang X, Yuan Z, Zhou G (2019) Novel quadrature element formulation for simultaneous local and global buckling analysis of eccentrically stiffened plates. Aerosp Sci Technol 87:154–166
Zhang R, Zhong H, Yao X (2019) A weak form quadrature element formulation of geometrically exact shells incorporating drilling degrees of freedom. Comput Mech 63:663–679
Liu B, Lu S, Ji J, Ferreira AJM, Liu C, Xing Y (2019) Three-dimensional thermo-mechanical solutions of cross-ply laminated plates and shells by a differential quadrature hierarchical finite element method. Compos Struct 208:711–724
Zhang B, Li H, Kong L, Wang J, Shen H (2019) Strain gradient differential quadrature beam finite elements. Comput Struct 218:170–189
Xia J, Shen Z, Liu K, Sun C (2019) Flexural and eigen-buckling analysis of steel-concrete partially composite plates using weak form quadrature element method. J Cent South Univ 26:3087–3102
Zhang R, Zhong H, Yao X, Han Q (2020) A quadrature element formulation of geometrically nonlinear laminated composite shells incorporating thickness stretch and drilling rotation. Acta Mech 231:1685–1709
Ishaquddin M, Gopalakrishnan S (2020) A novel weak form quadrature element for gradient elastic beam theories. Appl Math Model 77:1–16
Zhang B, Li H, Kong L, Shen H, Zhang X (2020) Size-dependent static and dynamic analysis of Reddy-type micro-beams by strain gradient differential quadrature finite element method. Thin-Walled Struct 148:106496
Zhang B, Li H, Kong L, Zhang X, Shen H (2020) Strain gradient differential quadrature Kirchhoff plate finite element with the C2 partial compatibility. Eur J Mech-A/Solids 80:103879
Zhang B, Li H, Kong L, Zhang X, Feng Z (2020) Strain gradient differential quadrature finite element for moderately thick micro-plates. Int J Numer Methods Eng 121:5600–5646
Liu B, Shi T, Xing Y (2020) Three-dimensional free vibration analyses of functionally graded laminated shells under thermal environment by a hierarchical quadrature element method. Compos Struct 252:112733
Trabelssi M, El-Borgi S, Friswell MI (2020) A high-order FEM formulation for free and forced vibration analysis of a nonlocal nonlinear graded Timoshenko nanobeam based on the weak form quadrature element method. Arch Appl Mech 90:2133–2156
He G, Li X (2020) Weak-form quadrature-element method for creep and shrinkage analysis of steel-concrete composite beams. J Eng Mech 146:04020015
Ahmed S, Abdelhamid H, Ismail B, Ahmed F (2020) Differential quadrature finite element and the differential quadrature hierarchical finite element methods for the dynamics analysis of on board shaft. Eur J Comput Mech 29:303–344
Cai D, Wang X, Zhou G (2021) A rotation-free quadrature element formulation for free vibration analysis of thin sectorial plates with arbitrary boundary supports. Comput Math Appl 99:84–98
Yan Y, Liu B, Xing Y, Carrera E, Pagani A (2021) Free vibration analysis of variable stiffness composite laminated beams and plates by novel hierarchical differential quadrature finite elements. Compos Struct 274:114364
Wang Q, Li Z, Qin B, Zhong R, Zhai Z (2021) Vibration characteristics of functionally graded corrugated plates by using differential quadrature finite element method. Compos Struct 274:114344
Zhang B, Li H, Kong L, Zhang X, Feng Z (2021) Weak-form differential quadrature finite elements for functionally graded micro-beams with strain gradient effects. Acta Mech 232:4009–4036
Zhang B, Li H, Kong L, Zhang X, Feng Z (2021) Variational formulation and differential quadrature finite element for freely vibrating strain gradient Kirchhoff plates. ZAMM 101:e202000046
Li H, Zhong H (2021) Weak form quadrature elements based on absolute nodal coordinate formulation for planar beamlike structures. Acta Mech 232:4289–4307
Zhang R, Stanciulescu I, Yao X, Zhong H (2021) An energy-momentum conserving scheme for geometrically exact shells with drilling DOFs. Comput Mech 67:341–364
Qin J, Zhong H (2021) A weak form temporal quadrature element formulation for linear structural dynamics. Eng Comput 38:3904–3931
Qin J, Zhong H (2022) A Galerkin time quadrature element formulation for linear structural dynamics. Appl Math Comput 413:126609
Liu H, Zhong H (2022) Weak form quadrature element analysis of crack-tip asymptotic field coefficients. Theoret Appl Fract Mech 119:103320
Liao M, Tang A, Hu YG (2015) Calculation of mode III stress intensity factors by the weak-form quadrature element method. Arch Appl Mech 85:1595–1605
Liao M, Tang A, Hu YG, Guo Z (2015) Computation of coefficients of crack-tip asymptotic fields using the weak form quadrature element method. J Eng Mech 141:04015018
Xiang W, Li X, He L (2022) Improved differential quadrature finite element method for free vibration of Mindlin plates with arbitrary elastic boundaries. Int J Appl Mech 14:2150128
Wang X, Cai D, Zhou G (2022) Quadrature element vibration analysis of arbitrarily shaped membranes. Trans Nanjing Univ Aeronaut Astronaut 39:1–11
Huang P, Song Y, Liu X, Lin K (2022) Analysis of pillow effect for isosceles triangular membranes of mesh reflector antenna by the weak form quadrature element method. AIP Adv 12:035013
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author has no competing interests to declare that are relevant to the content of this article.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Liao, M. Weak-Form Quadrature Element Method: A Comparative Review of Different Formulations and Its Comprehensive Assessment. Arch Computat Methods Eng 30, 317–329 (2023). https://doi.org/10.1007/s11831-022-09799-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11831-022-09799-4