Abstract
Cellulose nanocrystals (CNCs) were surface modified with 3-isocyanatopropyl triethoxysilane (ICPTS) in tetrahydrofuran at 62–63 °C using triethylamine as a catalyst. ICPTS modified CNCs were further studied as a nanofiller in nanocomposites with linear low-density poly(ethylene) (LLDPE) prepared by melt processing. The modification of CNCs was confirmed by FTIR, solid state NMR, and thermogravimetric analysis. Compared to unmodified CNCs, the ICPTS modified CNCs show enhanced compatibility with LLDPE as shown by SEM. Nanocomposites processed at 70 °C reveal slightly enhanced mechanical properties and this effect was further intensified by increasing the molding temperature up to 120 °C. Under such conditions, a 20% increase in Young’s modulus and 30% increase in tensile strength are achieved compared to neat LLDPE. Differential scanning calorimetry confirms the degree of LLDPE crystallinity, beside the CNC reinforcing network formation, as an important decisive factor in defining the final mechanical properties of LLDPE/CNC nanocomposites. The maximal enhancement of mechanical properties was observed at rather low amount of added ICPTS modified CNC (1–2 wt.%), which is important for practical application as CNCs are still rather expensive nanofiller. By modification of CNC with ICPTS the CNC polarity is reduced, which result in their improved compatibility with LLDPE, while on the other hand they function as a plasticizer and thus reduce the LLDPE crystallization degree, especially at high CNC concentrations.
Graphic abstract
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Anžlovar A, Anžur I, Malavašič T (1997) Kinetics of formation of polyurethane/polymethylmethacrylate grafted semi-interpenetrating polymer networks based on the functional prepolymers. Polym Bull 39:339–346. https://doi.org/10.1007/s002890050157
Anžlovar A, Huskić M, Žagar E (2016) Modification of nanocrystalline cellulose for application as a reinforcing nanofiller in PMMA composites. Cellulose 23:505–518. https://doi.org/10.1007/s10570-015-0786-9
Anžlovar A, Kunaver M, Krajnc A, Žagar E (2018) Nanocomposites of LLDPE and surface-modified cellulose nanocrystals prepared by melt processing. Molecules 23:1782. https://doi.org/10.3390/molecules23071782
Campelo JM, Luna D, Luque R, Marinas JM, Romero AA (2009) Sustainable preparation of supported metal nanoparticles and their applications in catalysis. Chemsuschem 2:18–45. https://doi.org/10.1002/cssc.200800227
De Menezes AJ, Siqueira G, Curvelo AAS, Dufresne A (2009) Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites. Polymer 50:4552–4563. https://doi.org/10.1016/j.polymer.2009.07.038
Detken A, Hardy EH, Ernst M, Meier BH (2002) Simple and efficient decoupling in magic-angle spinning solid-state NMR: The XiX scheme. Chem Phys Lett 356:298–304. https://doi.org/10.1016/S0009-2614(02)00335-4
Dong F, Yan M, Jin C, Li S (2017) Characterization of type-II acetylated cellulose nanocrystals with various degree of substitution and its compatibility in PLA films. Polymers 9:346. https://doi.org/10.3390/polym9080346
Dufresne A (2013) Nanocellulose: a new ageless bionanomaterial. Mater Today 16:220–227. https://doi.org/10.1016/j.mattod.2013.06.004
Espino-Pérez E, Bras J, Ducruet V, Guinault A, Dufresne A, Domenek S (2013) Influence of chemical surface modification of cellulose nanowhiskers on thermal, mechanical, and barrier properties of poly(lactide) based bionanocomposites. Eur Polym J 49:3144–3154. https://doi.org/10.1016/j.eurpolymj.2013.07.017
Farahbakhsh N, Venditti RA, Jur JS (2014) Mechanical and thermal investigation of thermoplastic nanocomposite films fabricated using micro- and nano-sized fillers from recycled cotton T-shirts. Cellulose 21:2743–2755. https://doi.org/10.1007/s10570-014-0285-4
Favier V, Canova GR, Shrivastava SC, Cavaille JY (1997) Mechanical percolation in cellulose whisker nanocomposites. Polym Eng Sci 37:1732–1739. https://doi.org/10.1002/pen.11821
French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–896. https://doi.org/10.1007/s10570-013-0030-4
French AD (2017) Glucose, not cellobiose, is the repeating unit of cellulose and why that is important. Cellulose 24:4605–4609. https://doi.org/10.1007/s10570-017-1450-3
Girouard NM, Xu SH, Schueneman GT, Shofner ML, Meredith JC (2016) Site-selective modification of cellulose nanocrystals with isophorone diisocyanate and formation of polyurethane-cnc composites. ACS Appl Mater Interfaces 8:1458–1467. https://doi.org/10.1021/acsami.5b10723
Habibi Y, Chanzy H, Vignon MR (2006) TEMPO-mediated surface oxidation of cellulose whiskers. Cellulose 13:679–687. https://doi.org/10.1007/s10570-006-9075-y
Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–3500. https://doi.org/10.1021/cr900339w
Habibi Y (2014) Key advances in the chemical modification of nanocelluloses. Chem Soc Rev 43:1519–1542. https://doi.org/10.1039/c3cs60204d
Hasani M, Cranston ED, Westman G, Gray DG (2008) Cationic surface functionalization of cellulose nanocrystals. Soft Matter 4:2238–2244. https://doi.org/10.1039/b806789a
Kaynak B, Spoerk M, Shirole A, Ziegler W, Sapkota J (2018) Polypropylene/cellulose composites for material extrusion additive manufacturing. Macromol Mater Eng 303:1800037. https://doi.org/10.1002/mame.201800037
Klemm D, Kramer F, Moritz S, Lindstroem T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50:5438–5466. https://doi.org/10.1002/anie.201001273
Kiziltas A, Nazari B, Kiziltas EE, Gardner DJS, Han Y, Rushing TS (2016) Cellulose nanofiber-polyethylene nanocomposites modified by polyvinyl alcohol. J Appl Polym Sci 33:42933. https://doi.org/10.1002/APP.42933
Kos T, Anžlovar A, Kunaver M, Huskić M, Žagar E (2014) Fast preparation of Nanocrystalline cellulose by microwave-assisted hydrolysis. Cellulose 21:2579–2585. https://doi.org/10.1007/s10570-014-0315-2
Kunaver M, Anžlovar A, Žagar E (2016) The fast and effective isolation of nanocellulose from selected cellulosic feedstocks. Carbohydr Polym 148:251–258. https://doi.org/10.1016/j.carbpol.2016.04.076
Lasseuguette E (2008) Grafting onto microfibrils of native cellulose. Cellulose 15:571–580. https://doi.org/10.1007/s10570-008-9200-1
Lee KY, Aitomaki Y, Berglund LA, Oksman K, Bismarck A (2014) On the use of nanocellulose as reinforcement in polymer matrix. Compos Sci Technol 105:15–27. https://doi.org/10.1016/j.compscitech.2014.08.032
Lia J, Songa Z, Lib D, Shanga S, Guo Y (2014) Cotton cellulose nanofiber-reinforced high density polyethylene composites prepared with two different pretreatment methods. Ind Crops Products 59:318–328. https://doi.org/10.1016/j.indcrop.2014.05.033
Ljungberg N, Cavaille JY, Heux L (2006) Nanocomposites of isotactic polypropylene reinforced with rod-like cellulose whiskers. Polymer 47:6285–6292. https://doi.org/10.1016/j.polymer.2006.07.013
Ly EB, Bras J, Sadocco P, Belgacem MN, Dufresne A, Thielemans W (2010) Surface functionalization of cellulose by grafting oligoether chains. Mater Chem Phys 120:438–445. https://doi.org/10.1016/j.matchemphys.2009.11.032
Metz G, Wu XL, Smith SO (1994) Ramped-amplitude cross polarization in magic-angle-spinning NMR. J Magn Reson Ser A 110:219–227. https://doi.org/10.1006/jmra.1994.1208
Mokhena TC, Luyt AS (2014) Investigation of polyethylene/sisal whiskers nanocomposites prepared under different conditions. Polym Compos 35:2221–2233. https://doi.org/10.1002/pc.22887
Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–3994. https://doi.org/10.1039/c0cs00108b
Morelli CL, Belgacem MN, Branciforti MC, Bretas RES, Crisci A, Bras J (2016) Supramolecular aromatic interactions to enhance biodegradable film properties through incorporation of functionalized cellulose nanocrystals. Compos Part A 83:80–88. https://doi.org/10.1016/j.compositesa.2015.10.038
Nishiyama Y, Langan P, Chanzy H (2002) Crystal structure and hydrogen-bonding system in cellulose Iβ from synchrotron X-ray and neutron fiber diffraction. J Am Chem Soc 124:9074–9082. https://doi.org/10.1021/ja0257319
Pahimanolis N, Hippi U, Johansson LS, Saarinen T, Houbenov N, Ruokolainen J, Seppala J (2011) Surface functionalization of nanofibrillated cellulose using click-chemistry approach in aqueous media. Cellulose 18:1201–1212. https://doi.org/10.1007/s10570-011-9573-4
Paquet O, Krouit M, Bras J, Thielemans W, Belgacem MN (2010) Surface modification of cellulose by PCL grafts. Acta Mater 58:792–801. https://doi.org/10.1016/j.actamat.2009.09.057
Pei AH, Zhou Q, Berglund LA (2010) Functionalized cellulose nanocrystals as biobased nucleation agents in poly(L-lactide) (PLLA) - Crystallization and mechanical property effects. Compos Sci Technol 70:815–821. https://doi.org/10.1016/j.compscitech.2010.01.018
Pinheiro IF, Ferreira FV, Souza DHS, Gouveia RF, Lona LMF, Morales AR, Mei LHI (2017) Mechanical, rheological and degradation properties of PBAT nanocomposites reinforced by functionalized cellulose nanocrystals. Eur Polym J 97:356–365. https://doi.org/10.1016/j.eurpolymj.2017.10.026
Rodionova G, Lenes M, Eriksen O, Gregersen O (2011) Surface chemical modification of microfibrillated cellulose: improvement of barrier properties for packaging applications. Cellulose 18:127–134. https://doi.org/10.1007/s10570-010-9474-y
Rueda L, d'Arlas BF, Zhou Q, Berglund LA, Corcuera MA, Mondragon I, Eceiza A (2011) Isocyanate-rich cellulose nanocrystals and their selective insertion in elastomeric polyurethane. Compos Sci Technol 71:1953–1960. https://doi.org/10.1016/j.compscitech.2011.09.014
Salon MB, Gerbaud G, Abdelmouleh M, Bruzzese C, Boufi S, Belgacem MN (2007) Studies of interactions between silane coupling agents and cellulose fibers with liquid and solid-state NMR. Magn Reson Chem 45:473–483. https://doi.org/10.1002/mrc.1994
Sapkota J, Jorfi M, Weder C, Foster EJ (2014) Reinforcing poly(ethylene) with cellulose nanocrystals. Macromol Rapid Commun 35:1747–1753. https://doi.org/10.1002/marc.201400382
Sapkota J, Garcia JCM, Lattuada M (2017a) Reinterpretation of the mechanical reinforcement of polymer nanocomposites reinforced with cellulose nanorods. J Appl Polym Sci 134:45254. https://doi.org/10.1002/app.45254
Sapkota J, Gooneie A, Shirole A, Garcia JCM (2017b) A refined model for the mechanical properties of polymer composites with nanorods having different length distributions. J Appl Polym Sci 134:45279. https://doi.org/10.1002/app.45279
Schilling T, Miller MA, van der Schoot P (2015) Percolation in suspensions of hard nanoparticles: from spheres to needles. Eurphys Lett 111:56004. https://doi.org/10.1209/0295-5075/111/56004
Seydibeyoglu MO, Misra M, Mohanty A, Blaker JJ, Lee KY, Bismarck A, Kazemizadeh M (2013) Green polyurethane nanocomposites from soy polyol and bacterial cellulose. J Mater Sci 48:2167–2175. https://doi.org/10.1007/s10853-012-6992-z
Siqueira G, Bras J, Dufresne A (2009) Cellulose Whiskers versus Microfibrils: Influence of the Nature of the Nanoparticle and its Surface Functionalization on the Thermal and Mechanical Properties of Nanocomposites. Biomacromol 10:425–432. https://doi.org/10.1021/bm801193d
Siqueira G, Bras J, Follain N, Belbekhouche S, Marais S, Dufresne A (2013) Thermal and mechanical properties of bio-nanocomposites reinforced by Luffa cylindrica cellulose nanocrystals. Carbohydr Polym 91:711–717. https://doi.org/10.1016/j.carbpol.2012.08.057
Suwanruji P, Tuechart T, Smitthipong W, Chollakup R (2017) Modification of pineapple leaf fiber surfaces with silane and isocyanate for reinforcing thermoplastic. J Thermopl Compos Mater 30:1344–1360. https://doi.org/10.1177/0892705716632860
Suzuki K, Homma Y, Igarashi Y, Okumura H, Semba T, Nakatsubo F, Yano H (2016) Investigation of the mechanism and effectiveness of cationic polymer as a compatibilizer in microfibrillated cellulose reinforced polyolefins. Cellulose 23:623–635. https://doi.org/10.1007/s10570-015-0845-2
Taipina MD, Ferrarezi MMF, Yoshida IVP, Goncalves MD (2013) Surface modification of cotton nanocrystals with a silane agent. Cellulose 20:217–226. https://doi.org/10.1007/s10570-012-9820-3
Tingaut P, Hauert R, Zimmermann T (2011) Highly efficient and straightforward functionalization of cellulose films with thiol-ene click chemistry. J Mater Chem 21:16066–16076. https://doi.org/10.1039/c1jm11620g
Tingaut P, Zimmermann T, Sebe G (2012) Cellulose nanocrystals and microfibrillated cellulose as building blocks for the design of hierarchical functional materials. J Mater Chem 22:20105–20111. https://doi.org/10.1039/c2jm32956e
Tome LC, Pinto RJB, Trovatti E, Freire CSR, Silvestre AJD, Neto CP, Gandini A (2011) Transparent bionanocomposites with improved properties prepared from acetylated bacterial cellulose and poly(lactic acid) through a simple approach. Green Chem 13:419–427. https://doi.org/10.1039/c0gc00545b
Trovati G, Sanches E, Neto SC, Mascarenhas YP, Chierice GO (2010) Characterization of Polyurethane Resins by FTIR, TGA, and XRD. J Appl Polym Sci 115:263–268. https://doi.org/10.1002/app.31096
Ugarte L, Santamaria-Echart A, Mastel S, Autore M, Hillenbrand R, Corcuera MA, Eceiza A (2017) An alternative approach for the incorporation of cellulose nanocrystals in flexible polyurethane foams based on renewably sourced polyols. Ind Crops Prod 95:564–573. https://doi.org/10.1016/j.indcrop.2016.11.011
Xu X, Liu F, Jiang L, Zhu JY, Haagenson D, Wiesenborn DP (2013) Cellulose nanocrystals vs. cellulose nanofibrils: a comparative study on their microstructures and effects as polymer reinforcing agents. ACS Appl Mater Interfaces 5:2999–3009. https://doi.org/10.1021/am302624t
Ye M, Zhu N, Li X, Ni Z, Qiu Z, Chen M (2017) Monofunctional compatibilizer with long alkyl end for fabrication of superior tensile wood flour-polyolefin composites. J Appl Polym Sci 33:44429. https://doi.org/10.1002/APP.44429
Acknowledgments
The authors acknowledge the financial support from the Slovenian Research Agency (Research Core Fundings No. P2-0145 and P1-0021) and the Slovenian Ministry of Education, Science, and Sport (Program Martina No. OP20.00369). Authors acknowledge the support of Dr. Matjaž Kunaver by providing the raw dispersion of CNCs in the reaction medium.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Anžlovar, A., Krajnc, A. & Žagar, E. Silane modified cellulose nanocrystals and nanocomposites with LLDPE prepared by melt processing. Cellulose 27, 5785–5800 (2020). https://doi.org/10.1007/s10570-020-03181-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-020-03181-y