Abstract
Olive stones have been widely used as a renewable energy biowaste source. As they are rich in elemental carbon (40–45 wt%), much research focussed on effectively converting olive stones, as precursors, into activated carbon adsorbents. However, only a few studies have concentrated on summarising the various techniques used to produce activated carbon from olive stone. This article reviews the research undertaken on the production and application of activated carbon as an adsorbent from olive stones for wastewater treatment. Various physical, chemical and physico-chemical treatments to remove heavy metals, organics and dyes are discussed, and the resultant adsorption capacities are reported. In several cases, very high adsorption capacities are recorded. Finally, the future prospects of these materials as adsorbents are discussed, and after further development work, olive stone-derived activated carbons have great potential especially in the area of organic polluted wastewaters.
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs13399-019-00473-7/MediaObjects/13399_2019_473_Figa_HTML.png)
Activation process of olive stone
Graphical abstract
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
1 Introduction
The term ‘activated carbon’ or AC defines a category of amorphous carbonaceous materials with high porosity and internal surface area. Activated carbon can be produced from any carbonaceous material, and until recently, anthracite and bituminous coals have been the major sources. Activated carbons are the most widely used adsorbents for the treatment of wastewaters and emissions.
Environmental awareness has also shaped the manufacturing of activated carbons by introducing the concept that normal everyday waste materials, such as agricultural by-products and old tyres [1], are potential precursor sources of activated carbon. Nowadays, the sources of activated carbon are extensive and are ever expanding. Any low-cost material with a high carbon content and low in inorganics content can be used as precursors to produce activated carbon [2,3,4,5]. Most of the literature refers to the production of active carbons from coal [6], bamboo [7,8,9,10] and other lignocellulosic materials [11,12,13,14]. Activated carbon is the most widely used adsorbent because of its low cost, exceptionally high porosity, tuneable pore size and high adsorptive capacities [15, 16]. The raw materials widely used initially for the production of commercial activated carbon are coal, bone char, peat, petroleum coke, lignite, wood and other biomass sources.
However, today the range of precursor materials is diverse and widespread. Nearly all organic materials with relatively high carbon content may serve as raw materials, ranging from conventional materials such as wood, coconut shell or coal to natural or synthetic polymers. For commercial grade carbons, the values of surface areas typically vary in the range between 500 and 1500 m2/g or even as high as 3000 m2/g [13]. They can be further separated into two sub-categories in accordance with their applications, namely, gas phase and liquid phase, in which the former is usually microporous (pore diameter < 2 nm) in granular form (2.36–0.833 mm, or 8/20 in mesh size) and the latter is mesoporous (pore diameter lies between 2 and 50 nm) in powdered form (0.150–0.043 mm, or 100/325). Both granular and powdered activated carbons have been shown to be effective in wastewater treatment in which activated carbons play an important role in decolorising, odour removal, and metal recovery as well as organics adsorption.
Alternatively, adsorption, as a flexible, simple and inexpensive approach, can be used for process wastewater treatment, thus reducing the concerns over high operating and capital costs, efficiency and the need for secondary treatment [17,18,19]. A wide range of adsorbent materials have been developed and tested over the years and applied for the efficient treatment of various effluents, such as dye removal, heavy metals, pharmaceuticals, pesticides and a wide range of organic compounds. The intensive search for naturally occurring adsorbents began around 40 years ago using peat [20, 21], wood ([22, 23]) plant residues such as Jatropha curcas [24], mineral zeolites [25], textile wastes [26] and agricultural wastes [27, 28] Recently, adsorption onto activated carbon prepared from a wide range of low-cost biomass precursors has been reported ([29,30,31]). All these studies have found that the produced carbons have comparable and higher adsorption capacities than commercially available varieties. However, economic feasibility and locality of supply have limited their commercial production.
In addition to the naturally occurring adsorbent materials, many biomass wastes have been the subject of investigation:
Shells and husks from nuts and other agricultural products
Fruit stone waste
Adsorbents from other wastes such as vehicle tyres, waste plastics and seafood shell waste
These categories of wastes are presented in Section 2 of this review and some of the adsorption performance data are compared with the results of the olive stone-derived activated carbons for similar compounds in Section 3.5 of this study.
These results from these biomass waste studies indicate that some of these materials are suitable precursors for the production of activated carbons possessing high surface areas and pore volumes, a range of pore size distribution, appropriate hardness and bulk density. The criteria used when choosing a carbonaceous raw material include the potential for obtaining high-quality activated carbon with a low inorganic content, volume and cost of the raw material, workability of the raw material, minimum environmental impact and storage life of the raw material. As waste materials represent the feedstock to the activated carbon plant, then the raw material has a very low cost.
Olive stone is an essential by-product generated in the olive oil extraction industries. In terms of production scale, olive stones are produced by far on the largest scale, and a vast market includes the sale of stoneless olive products. It represents roughly 10% by weight of olive fruit and the amount of fixed and elemental carbon content within olive stone are around 16 and 47 wt%, respectively [30], which is considered as one of the highest values of carbon among various stone fruits.
To date over one hundred research articles have been published on the production of activated carbon from olive stones. However, only a few review articles [32,33,34,35,36,37], mostly 5–10 years old, have been published in the last 15 years covering the area of olive stone, and none of them presents the detailed study of the production of activated carbon from olive stones. Consequently, this review covers the available studies on the production and application of olive stones to produce activated carbons.
2 Adsorption technology
2.1 Adsorption
Adsorption has long been used as a purification and separation process on an industrial scale. Highly porous adsorbents with good selectivity such as activated carbon have shown excellent ability in the removal of organic compounds such as dyestuffs, phenolics, endocrine-disrupting compounds, pesticides, pharmaceuticals and several metal ions [28, 38,39,40].
The phenomenon of adsorption follows one of three general types, namely, diffusion, surface chemical reaction including ion exchange and surface complexation. Diffusion processes are described in terms of pore diffusion, surface diffusion or a combination model of the two mechanisms; frequently, an external boundary layer film resistance is incorporated into these models. For chemical surface reactions, several kinetic models are available depending on the adsorbate–adsorbent functional group order of reaction; examples include pseudo-first-order, pseudo-second-order, Elovich, Avrami and Bangham models [41,42,43,44]. Surface complexation mechanisms have been proposed for many adsorption processes and especially in the case of heavy metal removal from wastewater. This process includes the coordination of the heavy metal ion with a number of functional surface groups and takes place via lone pair electron donation or hydrogen bonding [45]. The type of adsorption mechanism therefore depends on the nature of the adsorbate and the properties of the adsorbent.
Adsorption of dye onto adsorbents is a physical phenomenon in which dye molecules attach onto the adsorbent surface under the influence of van der Waals forces and hydrogen bonding. In a continuous contact system, each contact point is equivalent to an equilibrium stage or theoretical plate, offering adsorption as a unique advantage because it is possible to achieve complete separation within a short fixed-bed column. Adsorption can help significantly [26] with the serious issues of coloured/dye, pharmaceutical or metal ion containing effluents being discharged due to the toxicity, high chemical stability and the presence of colour in water inhibiting the natural photosynthetic processes.
2.2 Advantages of adsorption in wastewater treatment
Several technologies are available for removing pollutants from wastewater and can be broadly divided into three categories, namely, physical (including adsorption), chemical and biological processes. These treatment techniques, including coagulation–flocculation, membrane separation, chemical oxidation, reverse osmosis and solvent extraction, have been used to process problematic polluted wastewaters [7, 46].
However, several of these treatment technologies generate their own problems including the associated high cost, large volumes of sludge formation and the subsequent disposal problems. To further understand the advantages and disadvantages of adsorption, it is essential to review the other available wastewater treatment technologies and their disadvantages.
Membrane filtration, such as ultrafiltration and reverse osmosis, involves the physical separation of dissolved dye molecules from effluent through permeable membranes under pressure and exhibit a good ability in separating solutes from wastewater. The major disadvantages of this process are the cost of the filter media and the occurrence of clogging, that most likely occurs in the case of build-up of a concentrated dye layer, which gradually reduces the overall removal efficiency with a lower flux rate [47]. Other physical separation options include irradiation [48] and electrokinetic coagulation [49]. They both exhibited good removal efficiency for certain dye species but were less effective in others [19], and further in-depth studies are needed.
Most chemical techniques such as chlorination, ozonation, wet air oxidation (WAO) and advanced oxidation process (AOP) [9, 10, 50] for organic and dye wastewater treatment aim to break down the complex chemical molecules into relatively simple and less toxic substances such as carbon dioxide or water via a series of oxidative reactions. However, dye molecules, in particular, usually possess good structural integrity, making them highly resistant to biodegradation or oxidation. Consequently, there is the additional generation of certain potentially toxic side products requiring further attention [51, 52].
WAO operates at high temperature and pressure, involving high operational costs, in order to convert diluted organic pollutants [53,54,55] to acetic acid, carbon dioxide and other resistant by-products [56]. As an alternative, AOP using Fenton’s reagents, titanium oxides or ferrous ions as catalysts has been adopted in the degradation of organic pollutants, such as dye and phenolic compounds [7, 12, 14]. High removal efficiencies have been reported [57], but a ferrous sludge is generated and requires disposal [58].
Coagulation with the addition of flocculants has been applied to organic loaded wastewaters but removal efficiencies are only 80 to 90%; also, very careful pH control and sludge treatment after the process are disadvantages for organics [59] and heavy metals [60].
The major drawback in using electrochemical destruction [61] is the cost. Conventional aerobic methods such as activated sludge have been successfully applied in domestic wastewater treatment, but it depends on the pollutant affinity to the biomass [62]. The toxic nature of many organics and their strong molecular structure in the case of dyes and pharmaceuticals enables them to be highly resistant to microbial degradation [63,64,65]. Anaerobic digestion results in the generation of methane and hydrogen sulphide in the absence of oxygen which is acceptable for azo, diazo and reactive dye decolouration, but toxic aromatic amines in wastewater remained non-sensitive to the treatment [66].
In the case of applying adsorption technology for wastewater treatment, the first step is to target the most appropriate adsorbent for the pollutant in terms of capacity, the rate of uptake and the specific adsorbent cost. Furthermore, in a well-designed adsorption system, the pollutant can be totally removed for large volumes of wastewater treated before breakthrough occurs. These properties are interrelated with the adsorbent cost and the ability, or not, to regenerate the adsorbent with respect to the regeneration operating costs. The capital investment and installation costs for a commercial-scale adsorption system, usually fixed-bed columns containing granular activated carbons, are not high and the operational costs, mostly for the pumping process, are also reasonable as the pressure drops through granular carbons are relatively low and often downflow gravitational force can reduce this cost even more. Consequently, most of the criticism with regard to adsorption systems is with regard to regenerating the adsorbent. However, depending on the adsorbate–adsorbent, selecting the optimum regeneration approach can overcome much of the criticism. If the adsorbate is a highly toxic material, e.g. arsenate, arsenite, chromate, mercury, cadmium, etc., which cannot be regenerated for re-use therefore requiring in situ disposal, a very low-cost high capacity adsorbent should be selected; this can be stabilised or vitrified and sent to a hazardous waste landfill. Volatile solvents can be steam stripped off or hot gas stripped off the adsorbent in situ and then condensed for recovery and re-use. Heavy metals can be regenerated in the same manner as ion exchange columns; solvent stripping can be applied to various adsorbed species. A novel method is to pass a microbial broth through the spent adsorption column, containing a species of micro-organisms that will biodegrade the adsorbate—similar in principle to biosorption processes. For the more refractory stable organics, such as dyestuffs, the more expensive process of thermal regeneration is required and this usually requires transport offsite to a thermal regeneration facility and the loss of approximately 10% of the adsorbent.
2.3 Adsorbent types and characteristics
2.3.1 Characteristics of adsorbents
The selection of the adsorbent in the utilisation of adsorption process is primarily dependent on the uptake capacity of the adsorbent for an individual substance as well as the contacting system design. Ideally, the adsorbent should satisfy four requirements [67, 68]:
Reasonably high surface area or micropore volume to achieve a high adsorption capacity.
The pore diameter must be sufficiently large appropriate to the size of the adsorbate molecule.
The appropriate surface functional groups to attract the adsorbate molecule (or the large surface area may become of secondary importance).
A relatively large porous network providing access to the internal surface area by diffusion.
For the first aspect, the number of active sites is proportional to the surface area, or more precisely, the micropore volume due to its dominant contribution to the surface area; therefore, a larger surface area adsorbent is apparently advantageous in adsorption. The functionality of the surface groups will create a positively, neutral or negatively charged surface capable of attracting the adsorbing species. The reasonably large porous network also plays a significant role as it allows a higher diffusion rate that is critical to adsorption kinetics and process design. It is important to determine the molecular dimensions of the pollutant adsorbate and ensure that the activated carbon produced has sufficient pores of sufficient pore diameter to achieve the removal of the adsorbate. In addition, a large and cheap source of precursor is also required.
There are numerous adsorbents in commercial or laboratory use, and some common examples are activated carbons [69], zeolites [70], silica [71] and activated alumina [72]. Other examples include bone char ([73,73,74,76]); agricultural wastes or by-products, for example, wood meals, bagasse, nutshells, rice husks, fruit stones or maize cobs ([77, 78]); inorganic minerals, for example, bentonite, Fuller’s earth or clay ([79]); lignite ([80]); coconut shell ([81]); plastic wastes ([82,82,84]); chitin/chitosan [85, 86]; and aluminophosphate molecular sieves [87]. In recent years, some novel adsorbents such as carbon nanotubes or related structures are also being tested in adsorption applications [88, 89]. More details are presented in the following sections.
2.3.2 Naturally occurring resources
The early studies on the application of biomass resources as both adsorbents and precursors for the production of activated carbons were in the application of naturally occurring biomass resources, and some of these are currently used for commercial scale production of activated carbons. There is increasing pressure on these applications to be limited, as they represent a consumption of very slowly replaceable natural resources. Such materials that have been used as precursors include peat ([20, 21, 90]); lignite ([80]); various wood types, for example, Eucalyptus tree [22, 91], spruce wood [23, 92], sawdust [93], compressed wood [46], fir wood [94], oil palm wood [95], olive tree wood [96], tamarind wood [97], bamboo [98,98,100], Jatropha curcas [24] and wood biochar [101]; and sugarcane bagasse ([27, 28, 102]; McKay 1998; [68, 103]).
Other common naturally occurring and widely used adsorbents are the zeolites [25, 104], which have an aluminosilicate structure and come in various forms, and some are quartz, clinoptilolite, mordinite, chabazite and calcite.
2.3.3 Shells and husks
Waste by-products from the food crop sector have become one important source of activated carbon precursors in recent years. This has been associated with the environmental issues caused by large quantities of agricultural wastes. Much work has been done in the study and preparation of activated carbons from these cellulosic materials such as rice husk ([26]; [66]; [30, 31, 105]), almond shells [106,106,107,109], chickpea husk [110], coconut shell [9, 81, 111, 112], durian shell [53], oil palm shells [40, 54, 113], peanut hulls [107, 114, 115], pistachio nut shell [67], hazelnut shell [106, 116], Eucalyptus globulus [22, 117], macadamia nutshell [118, 119] and pine cone [110].
2.3.4 Fruit stone wastes
Across the world, stone fruit markets have been developed particularly for olives, dates and fig seeds. The stones of these products are hard and contain significant percentages of lignin, thus making them ideal as precursors for activated carbons. Among various stone fruits, olive stones have been widely studied as a precursor for activated carbon production mainly due to the high quality of activated carbon and the presence of high percentage of elemental carbon (40–45 wt%). But these studies have focussed on the production of the AC followed by testing for one or sometimes two pollutants, rather than selecting a pollutant compound first and then trying to tailor-make an olive stone-derived carbon with the most suitable adsorbent characteristics for that specific pollutant.
The canned fruit industry has been producing stoneless products for many years with the majority of these extracted fruit stones being discarded as wastes. In recent years, several of these stones have been used as precursors for the production of activated carbons. The fruit stones are rich in lignocellulose which provides a suitable base structure for the production of activated carbons. The range of fruit stones and related materials studied include apricot stones [120], date stones [121], plum stones [122,123,124], peach stones [125,126,127], cherry stones [128,129,130], olive stones [131], Macore fruit [132] and corn cob [118, 133,134,135].
2.3.5 Adsorbents from other wastes
Several studies have been undertaken to convert carbonaceous and other wastes into activated carbons or other adsorbing materials. The carbon containing wastes include vehicle tyres [136,137,138], plastic wastes [139, 140] and textiles, for example, silk waste [26].
Other waste materials have been used as precursors to produce effective adsorbents, for example, printed circuit board (pcb) e-waste has been treated with potassium hydroxide at 200 °C producing a cation exchange resin [141,142,143,144,145,146,147]. Another widely investigated adsorbent is chitosan produced by decarbonation followed by the deacetylation of seafood crustacea shells [85, 86, 148].
2.4 Advantages of activated carbons as adsorbents
In general, the adsorption capacity of activated carbon is proportional to the internal surface area, pore volume, pore size distribution and especially the surface chemistry. There are numerous reports of more organic adsorption in pores that are barely large enough to admit the adsorbate molecule; for example, it has been pointed out [149] that dyes and humic acids have dimensions (1.5–3.0 nm) that favour their adsorption in mesopores. Hence, the difference in pore size distribution affects the adsorption capacity for molecules of different sizes and shapes. The removal efficiency can be further enhanced by the electric force between the carbon surface and the adsorbate. In some cases, adsorption depends upon dissociation of particular functional groups—which in turn depend on the activating chemical and the conditions of application.
2.5 Activation methodology
The activation process to produce an activated carbon involves treating the carbonaceous precursor with a physical process such as heating in the presence of an inert gas or carbon dioxide or steam at temperatures in the range 500 to 1000 °C. An alternative process is the chemical activation method whereby a chemical is added to the precursor prior to the thermal treatment in the same temperature range. Combinations termed physico-chemical treatment may also be used. The overall process may be carried out as a one-stage, two-stage or three-stage process. The one-stage process involves adding the activating chemical to the precursor material at the beginning of the process and placing this mixture in a furnace to be heated up to the preset activation temperature in one cycle. The two-stage process involves the charring of the precursor material in stage 1 at a temperature in the range 400 to 550 °C, followed by cooling to produce a high carbon content char as the raw material for stage 2. Stage 2 involves the addition of the activating chemical to the char followed by the furnace activation stage 2. The three-stage process is the same as the two-stage process except for an initial stage 1 pretreatment step which, for example, could be the solvent extraction of some impurities in the precursor.
3 Olive stones
The main components of olive stones are presented in Table 1 [30, 35, 150] which include ultimate, proximate and lignocellulose analysis. It represents roughly 10% by weight of olive fruit [36]. The high percentage of carbon makes olive stone an attractive precursor for activated carbon production. Furthermore, there is a large industry in the production of seedless/stoneless olives, and this industry provides a significant, continuous supply of waste olive stones. Figure 1 depicts activation process of olive stone. In practice, these technologies may be used solely or in a cocktail mix in order to obtain optimal balance between economic benefit and technical efficiency during the course of water pollutant removal.
Most successful olive stone-derived activated carbons are based on the application of chemical, physical or physico-chemical as activation processes as presented in Tables 2, 3 and 4.
3.1 Chemical activation of olive stones
Table 2 shows the wide range of chemicals used for the activation of olive stones and include phosphoric acid, nitric acid, sulphuric acid, sodium hydroxide, potassium hydroxide, steam, potassium carbonate, zinc chloride, hydrochloric acid and hydrogen peroxide.
Activated carbons are excellent adsorbents due to their high surface area, microporous structure and high surface reactivity. Table 2 reflects the significance of chemical activation of olive stone. High surface reactivity, presence or absence of different functional groups especially oxygen groups, causes the phenomenon of ion adsorption on activated carbon as evident in the literature presented in Table 2 [153, 156]. Oxygen groups with acidic character are hydroxyl and carbonyl groups and they play an important role in the uptake capacity of adsorbent. Another important aspect of AC is their high surface area which can be increased with chemical activation, time and temperature as reported in Table 2 [154]. In a few cases, a combination of activating agents have been used, for example: sulphuric acid and ammonium thiosulphate, phosphoric acid and nitric acid, succinic acid and sodium bicarbonate, sulphuric acid and sodium hydroxide, zinc chloride and nitric acid, and hydrochloric acid and zinc chloride.
The data in Table 2 show the results of the chemical activation of olive stone and other olive industry-related products, such as olive pulp, olive pumice, olive cake and olive mill waste. The latter four materials are mainly comprised of olive fruit residues: all lacking the high carbon content and hardness of the olive stone.
The uptake of heavy metals onto chemically activated olive stones has been widely studied. In the case of cadmium removal [16], the capacity at pH = 5 was 24.83 mg/g but dropped to 9.01 mg/g at pH = 2 due to the competition from hydrogen ions, and phosphoric acid was used to produce this activated carbon from olive stone with a 1169-m2/g surface area. A zinc chloride-activated olive stone carbon only reported a capacity of 1.85 mg/g [158]; the surface area was 790 m2/g but the pH was not provided—the positive charge on this carbon surface would repel the approaching cadmium ions. A complex chemical activation treatment using succinic acid and sodium bicarbonate [165] produced an activated carbon with a significant cadmium uptake capacity of 200 and 128 mg/g at pH = 4 and with a basic surface, but no surface area was provided. The capacity differences were due to the different activation times of 1.5 and 1.0 h, respectively; therefore, a knowledge of the surface areas would have been particularly interesting.
Another phosphoric acid (PA)-activated carbon [171] from olive stone also had a significant cadmium adsorption capacity of 51.1 mg/g and the surface area was 1194 m2/g at pH = 5. The uptake of cobalt, nickel and copper on activated carbons obtained by treating olive stones with PA and PA + O3 (ozone) provided capacities in the range 10 to 17.9 mg/g, but treatment with PA + HNO3 (nitric acid) increased the nickel and copper capacities to 20.5 and 34.2 mg/g, respectively, by creating more oxidised sites in the form of surface carboxylic acid hydrogen ions for exchange with the metal ions [163]. In this study, the high capacity-activated carbon had the lowest surface area, 173 m2/g, indicating the importance of surface functional groups on carbon for heavy metal ion adsorption–ion exchange. Two studies reported lead capacities of 148.8 and 147.5 mg/g using PA to activate the olive stone [168, 171], and time, temperature and pH were the same and the only difference was a small difference of the surface areas which were 1081 and 1194 m2/g, respectively. In another study on lead removal, Blázquez et al. [172] treated olive stones separately with two acids, namely, sulphuric and nitric and sodium hydroxide, but the specific surface areas were extremely low as 0.51, 2.45 and 0.25 m2/g, respectively, with correspondingly low lead capacities of 14.1, 15.3 and 16.2 mg/g, respectively.
Several studies are presented in Table 2 for the adsorption of phenol from water using olive stone-derived carbons. Soudani et al. [164] treated olive stones with PA only and PA with four different molar concentrations (2, 3, 4 and 5 M) of nitric acid and these five activated carbons had surface areas ranging from 1242 to 13 m2/g from PA treatment only to PA + 5 M HNO3 treatment. Three of these were tested for phenol adsorption—PA, PA + 2 M HNO3, PA + 3 M HNO3—with relatively low capacities of 32.4, 28.6 and 24.4 mg/g, respectively. The capacity trend follows the surface area trend but was not proportional to the large surface area change of 2:1; phenol can adsorb due to the negative polarity on its hydroxyl group but is more frequently considered as adsorbing via the π-electron cloud on the benzene ring. Therefore, the nitric acid treatment is adding some positive functionality to the olive stone-activated carbon. All five activated carbons were used for the adsorption of methylene blue with capacities of 454, 625, 667, 667 and 526 m2/g, respectively. Again, the capacity trend is not proportional to surface area, although the pH for the PA-only-treated carbon was much higher than in the other four systems. For the three systems involving 2, 3 and 3 M HNO3 sufficient, for example, carboxylic or OH for 3 exchange with H+, sites must have been generated to remove the very high amounts of the positively charged coloured ion of the methylene blue molecule. In the case of the 5-M HNO3-treated carbon, the lower capacity, but still 526 mg/g, could be due to the surface area reduction—now only 12% of the 2-M nitric acid treated carbon.
Other dye adsorption studies have been reported for safranin yellow [166] and Remazol Red B [131], and both basic dyes have capacities of 526 and 9 mg/g. A single study for toluene adsorption on KOH-activated olive stone [152] produced a very high uptake of 720 mg/g, but no pH data was provided in this study. Iodine adsorption, a standard test for activated carbons on H2SO4-treated olive stone, yielded a high capacity of 570 mg/g, but the activated carbon surface area was not reported. Most of the remaining studies summarised in Table 2 relate to olive industry wastes not involving olive stones.
Bautista-Toledo et al. [151] treated olive mill waste with KOH and studied the adsorption of Cr(III) and bisphenol A; all the capacities were below 3 mg/g. Budinova et al. [153] treated olive pulp with KOH and K2CO3 for As(III) removal, but all capacities were less than 1.5 mg/g. Stavropoulos and Zabaniotou [154] treated olive seeds with KOH at various temperatures and contact times and obtained reasonable adsorption capacities for MB, in the range 190–263 mg/g.
Cimino et al. [155] treated olive cake samples by three methods—HCl, HNO3 and H2SO4‑—and tested several adsorbates, namely, Cd(II), Cr(III), DBSNa, phenol, Ag(I) and MB, and in all cases, the capacities were less than 3 mg/g except the HCl-treated olive seed for Ag(I) which had a capacity of 72 mg/g. This could be attributed to the affinity of Ag(I) for the U-impregnated surface. Lafi [157] obtained MB capacities of 110–115 mg/g on PA-treated olive seed at various temperatures, but no surface areas were provided. PA- and H2O2-treated olive pace showed capacities lower than 0.5 mg/g for Cd and Cu adsorption [159]. Other treatments in Table 2, for example, the organic solvent washing of olive wood [96], showed low capacities, less than 12 mg/g, for a range of chlorophenols and nitrophenols. One interesting result is the adsorption of the pharmaceutical amoxicillin onto PA-treated olive stone [161] because of the recent awareness of the accumulation of pharmaceutical personal care products, PPCPs, in drinking water sources.
3.2 Physical activation of olive stones
For the physical activation processes in Table 3 direct thermal treatments such as pyrolysis, nitrogen and steam, carbon dioxide and steam, nitrogen with plasma heating and carbon dioxide alone are widely used. Ion exchange sites and functional groups sometimes become more important than surface area [180] especially for the removal of dyes. Also, some pollutants have affinity with particular elements which can enhance uptake capacity as it was reported that increase in phenol adsorption was highly dependent on nitrogen content [162]. Moreover, pyrolysis was also employed to increase the surface acidity and decrease the surface basicity. This is due to the release of volatile basic compounds attached to the surface of the material [96]. Pyrolysis at above 100 °C resulted in the increase of carbon content due to the loss of volatile components and water; hence, the recovery of phenol decreases mainly due to the loss of water. At high temperature (250 °C), recovery decreased due to the depolymerisation of lignocellulose material [96]. In addition, particle size plays an important role in increasing the surface area and uptake capacity of adsorbent as smaller particle size offers a larger surface area [178].
The data summarised in Table 3 are based on olive stones and related olive industry waste materials, which have been activated by thermal treatment only or other physical activation means. Alsaibi et al. applied thermal treatment to produce an activated carbon of surface area 883 m2/g (Alslaibi et al. [187] and a second carbon of surface area 886 m2/g [174]. The first AC was used to remove Cu (17.8 mg/g), Fe (57.5 mg/g) and Pb (22.4 mg/g), and the second AC was used to remove Cd (7.80 mg/g), Ni (8.42 mg/g) and Zn (11.1 mg/g). Although no activating agent is present, the presence of the major constituents—cellulose, hemicellulose and lignin—enables some surface active sites and porosity to be developed due to thermal treatment only. These metal adsorbing/ion exchanging functional groups –COOH, –OH enable the metal ions to be removed from the solution, but to a lesser extent than the chemical activation methods described in Table 2. The temperature for thermal treatment was not mentioned in many of these papers.
More conventional physical activation using steam/nitrogen was performed [156] by producing an AC with a surface area of 474 m2/g. No temperature was provided and the loading capacity was high at 550 mg/g, but again the heavy metal uptake capacity, in this case zinc, was only 32.7 mg/g. High surface area olive stone applications were reported for this carbon [179]. An interesting study applying N2 + plasma was performed [162] by using treatment times of 5, 10 and 30 min and produced ACs of surface areas 1140, 1055 and 988 m2/g, respectively. The high phenol adsorption capacities for these three ACs were 226.4, 323.3 and 635.2 mg/g, respectively. Interestingly, the longer the treatment time, the lower the surface area, but the higher the phenol adsorption capacity. The prolonged treatment opened up micropores into mesopores causing the reduction in surface area with time and also changed the surface functionality, generating more nitrogen surface groups and decreasing the number of oxygen surface functional groups. Both of these effects favoured a high affinity for phenol adsorption.
Albadarin and Mangwandi [180] used olive stone directly without any activation treatment to adsorb two dyes, MB and Alizarin Red. Consequently, there are no significant surface groups available to adsorb the large positively charged basic dye coloured ions, and consequently, very low uptake capacities of 13.2 and 16.1 mg/g, respectively, were obtained. Ghouma et al. [181] used steam activation of olive stones to obtain an AC surface area of 807 m2/g, which was found to have an adsorption capacity of 131 mg/g for nitrogen dioxide. Both basic and acidic functional groups on the AC surface allow the reduction of NO2. Olive stones activated with CO2 were used to remove Cd from water [184] under various conditions. Good capacities of 78.7, 83,3 and 156 mg/g were obtained due to the additional –COOH groups created by the CO2 treatment, but no surface areas were provided.
Fewer studies used olive stones directly without pretreatment. Hernáinz et al. [182] performed three temperature isotherms for Cd removal at 25, 40 and 60 °C with low capacities of 4.90, 5.71 and 6.00 mg/g. Similar studies were undertaken for Cr(III) and Pb(II) and all the adsorption capacities were less than 7.5 mg/g [182]; all the experiments were conducted at pH = 7. Calero et al. [183] studied the removal of Cr(III) and Cr(VI) using untreated olive stones, Moubarik and Grimi [184] studied the removal of Cd (II) and Hodaifa et al. [185] studied Fe (III) removal and Blázquez et al. [172] studied Pb(II) removal—all these investigations used untreated olive stones but all these capacities were less than 5 mg/g.
Olive stones pyrolysed at 500 °C (SA of 760 m2/g) demonstrated a high capacity for phenolic compounds, 500 mg/g, and sulphonic compounds, 570 mg/g, due to their ability to II-bond on the positive carbon surface [186]. Several other olive industry wastes have undergone physical treatment/activation. Cimino et al. [155] used the same pollutants they studied in Table 1, this time using thermally treated olive cake, but all capacities were less than 6.75 mg/g. Baçaoui et al. [176] using steam/N2-activated olive waste cake, prepared at various times and temperatures, studied the adsorption of MB and iodine. The surface areas generated were between 514 and 1271 m2/g, and the very high iodine capacities reported were in the range 741 to 1495 mg/g and the high MB capacities ranged from 115 to 490 mg/g. Al-Anber and Matouq [177] obtained high capacities of 65.4, 60.6 and 50.0 mg/g for Cd adsorption at 28, 35 and 45 °C, respectively, for untreated olive cake. Solvent-extracted olive pumice had a capacity of 11.40 mg/g for mixed phenols [178] and 13.85 mg/g for MB [29].
A wide range of chlorophenols and nitrophenols were tested using pyrolysed olive wood at 50 °C temperature intervals from 100 to 300 °C, but all the capacities in Table 3 are less than 5.6 mg/g. The results in Tables 2 and 3 for the olive industry wastes excluding olive stones used as raw materials, namely, olive cake, olive wood, olive pomace, olive seed and olive pulp, in almost all cases, using relatively low temperature treatment, < 300 °C, had very low capacities. This suggests only a low concentration of surface functional groups has been created for both physical and chemical activation. Furthermore, for the heavy metals, some fraction of the adsorption uptake will occur by surface complexation, which is a widely recognised mechanism in biomass adsorption systems.
3.3 Physico-chemical activation treatment of olive stones
Table 4 presents the physico-chemical activation studies using olive stones. The processes include potassium hydroxide and microwave treatment steam and nitrogen mix, heat treatment with potassium carbonate/potassium hydroxide/zinc chloride and washing with selected organic solvents followed by pyrolysis of the resulting residue, zinc chloride and carbon dioxide, and zinc chloride with hydrochloric acid. The use of zinc chloride in activated carbon production has decreased in recent years due to its classification as a toxic heavy metal and its potential to leach out of the carbon into the treated water. Thermal–chemical activation led to the formation of more developed pore structure and larger surface area [188]. There are some results reported in Table 4 that show very low uptake capacity [96]. It is mainly due to the fact that olive woods do not fall under the category of AC and there is very little functionality and surface area.
Table 4 summarises the results of physico-chemical treatment studies using olive stones and olive industry wastes. These treatments mostly involve a chemical treatment coupled with a thermal or microwave treatment. Alslaibi et al. [187] produced an olive stone-derived activated carbon with a surface area of 1281 m2/g using KOH and microwave treatment. The maximum capacities reported for this AC for six metal ions were determined based on the Langmuir model analysis of the experimental data as follows: 11.7, 22.7, 62.5, 23.5, 12.0 and 15.1 mg/g for Cd, Cu, Fe(II), Pb(II), Ni and Zn. Although these results are quite good, they are lower than the values obtained by Bohli et al. [168, 171] in Table 2 for Cd, Zn and Pb, although the Cu result is higher. The results are only slightly higher for Cu, Fe(II) and Pb(II) than the thermally treated date stones in Table 3 [187].
Petrov et al. [188] used K2CO3 treatment with thermal activation to produce carbon with MB and iodine capacities of 394 and 1540 mg/g compared to the thermal treatment only results in Table 3 of 38 and 238 mg/g for MB and iodine, respectively. Spahis et al. [189] studied the removal of Pb from water using olive stones treated as (i) thermal and KOH and (ii) thermal and ZnCl2; the results were presented with respect to % removal of Pb with time and it was concluded that KOH-treated samples gave better capacities as compared with ZnCl2. They did not present values in milligrams [96] and extended their studies on olive wood-chemical treatment only in Table 2 and thermal treatment only in Table 3 to include the two integrated techniques in Table 4. However, it can be seen from the results that all the capacities are less than 6.54 mg/g and are typically in between the two sets of results in Tables 2 and 3. Furthermore, all the surface areas for all three treated olive woods lie in the range 70–195 m2/g. In these studies, the thermal treatment temperatures are too low to generate significant porosity, and normally, temperatures in excess of 600 °C are needed to develop high porosity. Also, the chemicals used are conventional solvent extraction chemicals rather than the normal activation chemicals.
Olive stones treated with ZnCl2 and CO2 yielded an AC with a high surface area of 1448 m2/g and significant ethanol adsorption capacity of 73.7 mg/g [167]. Temdrara et al. [169] used a treatment of HCl + ZnCl2 + CO2 and obtained very good capacities of 126.6, 147.1 and 158.7 mg/g for phenol using various ZnCl2 loadings.
3.4 Experimental details of the various treatment studies
Tables 5, 6 and 7 show the experimental conditions for the three previous ables 2, 3 and 4 respectively. Determining the most effective process conditions from an economic perspective depends on a number of interrelated factors:
- 1.
Reaction temperature and time: The higher the temperature and the longer the reaction time, the more expensive the process.
- 2.
Activating agent ratio to olive stone mass and the cost of the activating agent.
- 3.
Product yield and surface area: A high activated carbon yield from the activation stage provides a large quantity of adsorbent; also, a high specific surface area is often an indication of a high adsorption capacity and this is directly enhanced by increased product yield. The high surface area needs to be supported by the adsorbent having the correct functional groups for the specific pollutant adsorption and pores commensurate with the size of the pollutant molecule. Furthermore, solution pH influences the activated carbon surface charge.
- 4.
Porosity and surface functionality: The properties of the adsorbate have a major effect on the uptake capacity, and based on the chemical nature of the adsorbate (e.g. anionic or cationic), the surface functionality of the activated carbon will play a significant role. The molecular size of the adsorbate molecule is important with respect to the pore size distribution/porosity of the adsorbate. A large adsorbate molecule, for example with a molecular diameter > 2 nm, will be best accommodated in a mesoporous adsorbent. For an adsorbate species with a molecular diameter around 0.5 nm, normally, we would be looking for a mainly microporous activated carbon, but it should also be accompanied with a large overall porosity and, hence, a large surface area.
A literature review offers an excellent opportunity to review the available studies, experimental conditions, characterisation data and adsorption results for the range of adsorbates studied. This enables researchers to decide which conditions or range of conditions are likely to lead to an optimum adsorption treatment system design; examples are as follows:
- i.
qe versus temperature: However, temperature is not an independent variable and is strongly dependent on reaction time and activating agent (if any).
- ii.
qe versus specific surface area: This relationship is a good indicator of the quality of the activated carbon itself but does not indicate whether the percentage product carbon is in the range of 10 or 50% of the original biomass olive stone raw material.
- iii.
qe versus (specific surface area divided by fractional yield): This combined parameter relates the adsorption capacity to the original unit mass of raw olive stone feedstock. It is probably the best overall indicator of adsorption performance quality.
However, it should be noted that there are still omissions in relation to establishing the optimum economic value since reaction temperature, reaction time and the amount and cost of the activating agent are not included in these relationships. Furthermore, kinetic studies should be included in the appraisal for economic design. The more rapid is the approach to equilibrium, and hence, the maximum adsorption capacity is reached, then the more polluted water can be treated in a fixed amount of time. This means that the size of the treatment plant can be reduced with a subsequent saving on the capital investment cost of the treatment plant. Consequently, in the present review, a number of the most frequently studied adsorbates have been tested using the above qe correlative relationships when the data is available in the open literature.
3.5 Comparison of olive stone AC with other adsorbents
A number of the highest olive stone-derived activated carbon adsorption capacities from Tables 2, 3 and 4, are compared with other adsorbents for the same chemical species adsorbate in Table 8. It must be emphasised that making comparisons of this nature is very difficult, since the range of capacities for any specific adsorbate varies by a factor from 10 to 100 depending on the AC production conditions (and therefore the specific olive stone AC properties) and, in particular, the adsorption contact conditions, including contact time, pH, initial concentration, temperature, adsorbent mass to solution volume/concentration ratio and adsorbent particle size.
The results in Table 8 show that olive stone can be a competitive precursor for the production of activated carbon. Although comparing the activation and adsorption conditions is very difficult, a simple comparison of olive stone capacities shows that olive stone has the potential to surpass many other adsorbents, such as in the cases of the removal of safranin, iodine and phenol. E-waste adsorption capacities of heavy metals were higher than that of any other adsorbate. However, e-waste-derived adsorption applications are limited to a much shorter range of adsorbates than that of olive stones, but the e-waste sorbent is a cation exchanger and the mechanism follows metal ion exchange with potassium and calcium ions. Agricultural by-products are known for being potential sources for the production of activated carbons with high surface areas and adsorption capacities. Compared to other agricultural products in Table 8, olive stones outperformed all of the agricultural products in several studies reported and in many other literature studies. But it must be emphasised that the success of the adsorption capacity depends on the method and conditions of activation relative to the adsorbate. In the literature as a whole, there are few studies in which the biomass-derived activated carbon has been prepared with a specific adsorption duty in mind.
4 Criteria for producing quality activated carbons from olive stones
The definition of a high-quality activated carbon is relative and should include the terminology: it has a high removal capacity for the adsorbate or adsorbates required to be removed/adsorbed. The properties that need to be assessed to fulfill this definition are surface functionality, surface charge, zeta potential and point of zero charge, surface area, pore diameter, pore size distribution, density, hardness and regenerability. Features of a suitable raw material source for activated carbon production should include a high carbon content; a low ash content; a low sulphur content; low content of other impurities, such as chloride and heavy metals; availability; and cheapness. The typical composition of olive stone listed in Table 1 demonstrates that it possesses a range of high-quality properties indicating its suitability for activated carbon production. To make an assessment of the process conditions to achieve a high surface area olive stone-activated carbon examination of Tables 2, 3 and 4 provides a good insight. For chemical activation in Table 2, both acid treatment, particularly phosphoric acid, and alkali treatment, particularly KOH and K2CO3, produce surface areas in the region of 1100 to 1200 m2/g and even greater. However, further inspection reveals that additional factors influence surface area. Therefore, the temperature–time dependence is important: for studies at 700 °C, the thermal reaction contact time should be 4 h or more; for studies at 800 °C or above, the thermal contact time is over 2 h. The alkali reaction is complete in a slightly shorter time than the acid activation process. The other contributing factor is the activating chemical impregnation ratio. At a 1:1 ratio, there is often not enough activating chemical to complete the surface functionality and porosity development, and the surface areas are on the low side; consequently, the high surface areas reported for chemical activation use a ratio of 2:1 or greater. In general, 2:1 seems an optimum value for the impregnation ratio in terms of providing a high surface area and still remains relatively cheap for the activation chemicals. Higher chemical impregnation ratios may result in a loss in surface area if the reaction contact time is too long as micropores are transformed into mesopores and mesopores are transformed into macropores. In the case of physical activation treatment only, higher temperatures, > 800 °C, are required and there is usually less surface functionality.
5 Conclusion
Olive stones have been proposed and studied as a suitable precursor for the production of activated carbons for wastewater treatment applications. Many adsorption applications have been reported including the treatment of wastewaters containing phenol, chlorophenol, nitrophenol, ethanol, iodine, methylene blue dye, remazol red B dye, safranin, amoxicillin and several heavy metals. Most researchers have focussed their attention on the method, conditions and characterisation of the derived activated carbons and their adsorption capacities for these various pollutants. Three of the classical standard activated carbon tests, using methylene blue, iodine and phenol, have generated excellent high adsorption capacities, namely, 667, 1495 and 635 mg/g, respectively. These represent some of the highest values ever reported for activated carbons. Another extremely high capacity has been recorded for safranin dye as 526 mg/g. Furthermore, some tests, for the removal of heavy metals, have also yielded very good capacities, namely, lead with 148 mg/g and cadmium with 200 mg/g, but in general, activated carbons do not have high uptake capacities for metal ions.
In terms of the olive stone activation experiments themselves, the following criticisms are made regarding the current literature:
A lack of reporting of all the experimental details, for example, heating rate, activation temperature, activating agent concentrations, yields and inert gas flow rates.
A lack of reporting or determining all the characterisation parameters; in most cases, the surface areas are provided, but frequently mean pore size, pore size distribution and porosity are omitted; these are very important to ensure that large pollutant molecules can diffuse and adsorb into the pores.
More information on surface functionality and zeta potential needs to be provided, since adsorption capacity is more dependent on surface functionality than surface area.
A major criticism is that the design of tailor-made adsorbents for specific pollutant removal applications needs to be explored and applied by optimisation techniques such as RSM, response surface methodology; for practical applications, the pollutant must be defined first and then decide what properties of the activated carbon are needed, then optimise and design the industrial-scale system.
The following areas are lacking in terms of pollution application studies:
More detailed temperature studies to establish more thermodynamic parameters such as enthalpy, entropy, Gibbs free energy and activation energy.
More experimental conditions need to be investigated in both equilibrium and kinetics, especially the effect of pH and, in particular, the reporting of the final pH, which has a major influence on metal adsorption capacity.
More fixed-bed and regeneration studies are essential to enhance the development and application of olive stone-derived activated carbons on a commercial scale.
It is also important to test more equilibrium, kinetic/mass transport and fixed-bed models to enable accurate simulation and design models to be developed.
In conclusion, most studies have focussed on equilibrium isotherm analyses and adsorption capacities, but beyond these studies, only a few investigators have reported batch kinetic studies. In order to take the development of olive stone-derived activated carbons to the next stage of development, more kinetic studies are required and more studies on a laboratory scale or small pilot plant scale fixed-bed columns are required with their associated regeneration studies. In addition, optimisation studies are required for targeted pollutants, and preliminary simulation process designs and cost estimates should be carried out.
Abbreviations
- AC:
-
Activated carbon
- AOP:
-
Advanced oxidation processes
- MB:
-
Methylene blue
References
Ko DCK, Mui ELK, Lau KST, McKay G (2004) Production of activated carbons from waste tire—process design and economical analysis. Waste Manag 24:875–888. https://doi.org/10.1016/j.wasman.2004.03.006
Azbar N, Bayram A, Filibeli A et al (2004) A review of waste management options in olive oil production. Crit Rev Environ Sci Technol 34:209–247. https://doi.org/10.1080/10643380490279932
Gupta VK, Carrott PJM, Ribeiro Carrott MML, Suhas (2009) Low-cost adsorbents: growing approach to wastewater treatment—a review. Crit Rev Environ Sci Technol 39:783–842. doi: https://doi.org/10.1080/10643380801977610
Kushwaha S, Soni H, Ageetha V, Padmaja P (2013) An insight into the production, characterization, and mechanisms of action of low-cost adsorbents for removal of organics from aqueous sSolution. Crit Rev Environ Sci Technol 43:443–549. https://doi.org/10.1080/10643389.2011.604263
Rafatullah M, Ahmad T, Ghazali A et al (2013) Oil palm biomass as a precursor of activated carbons: a review. Crit Rev Environ Sci Technol 43:1117–1161. https://doi.org/10.1080/10934529.2011.627039
Ahmadpour A, Do DD (1996) The preparation of active carbons from coal by chemical and physical activation. Carbon NY 34:471–479. https://doi.org/10.1016/0008-6223(95)00204-9
Asada C, Nakamura Y, Kobayashi F (2005) Waste reduction system for production of useful materials from un-utilized bamboo using steam explosion followed by various conversion methods. Biochem Eng J 23:131–137. https://doi.org/10.1016/j.bej.2004.11.004
Choy KKH, Barford JP, McKay G (2005) Production of activated carbon from bamboo scaffolding waste—process design, evaluation and sensitivity analysis. Chem Eng J 109:147–165. https://doi.org/10.1016/j.cej.2005.02.030
Ohe K, Nagae Y, Nakamura S, Baba Y (2003) Removal of nitrate anion by carbonaceous materials prepared from bamboo and coconut shell. J Chem Eng Japan 36:511–515. https://doi.org/10.1252/jcej.36.511
Wu F, Tseng R, Juang R (1999) Preparation of activated carbons from bamboo and their adsorption abilities for dyes and phenol. J Environ Sci Heal Part A 34:1753–1775. https://doi.org/10.1080/10934529909376927
da Silva Lacerda V, López-Sotelo JB, Correa-Guimarães A et al (2015) Rhodamine B removal with activated carbons obtained from lignocellulosic waste. J Environ Manag 155:67–76. https://doi.org/10.1016/j.jenvman.2015.03.007
Mackay DM, Roberts PV (1982a) The influence of pyrolysis conditions on yield and microporosity of lignocellulosic chars. Carbon NY 20:95–104. https://doi.org/10.1016/0008-6223(82)90413-4
Otowa T, Tanibata R, Itoh M (1993) Production and adsorption characteristics of MAXSORB: high-surface-area active carbon. Gas Sep Purif 7:241–245. https://doi.org/10.1016/0950-4214(93)80024-Q
Rodríguez-Reinoso F, Molina-Sabio M (1992) Activated carbons from lignocellulosic materials by chemical and/or physical activation: an overview. Carbon NY 30:1111–1118. https://doi.org/10.1016/0008-6223(92)90143-K
Fierro V, Torné-Fernández V, Montané D, Celzard A (2008) Adsorption of phenol onto activated carbons having different textural and surface properties. Microporous Mesoporous Mater 111:276–284. https://doi.org/10.1016/j.micromeso.2007.08.002
Obregón-Valencia D, del Sun-Kou RM (2014) Comparative cadmium adsorption study on activated carbon prepared from aguaje (Mauritia flexuosa) and olive fruit stones (Olea europaea L.). J Environ Chem Eng 2:2280–2288. https://doi.org/10.1016/j.jece.2014.10.004
Belaid KD, Kacha S, Kameche M, Derriche Z (2013) Adsorption kinetics of some textile dyes onto granular activated carbon. J Environ Chem Eng 1:496–503. https://doi.org/10.1016/j.jece.2013.05.003
Hadi P, Sharma SK, McKay G (2015a) Removal of dyes from effluents using biowaste-derived adsorbents. In: Green chemistry for dyes removal from wastewater. Wiley, Hoboken, pp 139–201
Robinson T, McMullan G, Marchant R, Nigam P (2001) Remediation of dyes in textile effluent: a critical review on current treatment technologies with a proposed alternative. Bioresour Technol 77:247–255. https://doi.org/10.1016/S0960-8524(00)00080-8
Ho YS, McKay G (1998a) Kinetic model for lead(II) sorption on to peat. Adsorpt Sci Technol 16:243–255. https://doi.org/10.1177/026361749801600401
Poots VJP, McKay G, Healy JJ (1976a) The removal of acid dye from effluent using natural adsorbents—I peat. Water Res 10:1061–1066. https://doi.org/10.1016/0043-1354(76)90036-1
Arriagada R, García R, Reyes P (1994) Steam and carbon dioxide activation of Eucalyptus globulus charcoal. J Chem Technol Biotechnol 60:427–433. https://doi.org/10.1002/jctb.280600414
Poots VJP, McKay G, Healy JJ (1976b) The removal of acid dye from effluent using natural adsorbents—II wood. Water Res 10:1067–1070
Garg S, Das P (2018) High-grade activated carbon from pyrolytic biochar of Jatropha and Karanja oil seed cakes—Indian biodiesel industry wastes. Biomass Convers Biorefinery 8:545–561. https://doi.org/10.1007/s13399-018-0308-8
Payne KB, Abdel-Fattah T (2004) Adsorption of divalent lead ions by zeolites and activated carbon: effects of pH, temperature, and ionic strength. J Environ Sci Health A 39(9):2275–2291. https://doi.org/10.1081/ESE-200026265
McKay G, Ramprasad G, Mowli P (1987) Desorption and regeneration of dye colours from low-cost materials. Water Res 21:375–377. https://doi.org/10.1016/0043-1354(87)90218-1
Girgis BS, Khalil LB, Tawfik TAM (1994) Activated carbon from sugar cane bagasse by carbonization in the presence of inorganic acids. J Chem Technol Biotechnol 61:87–92. https://doi.org/10.1002/jctb.280610113
McKay G, El-Geundi M, Nassar MM (1997) Adsorption model for the removal of acid dyes from effluent by bagasse pith using a simplified isotherm. Adsorpt Sci Technol 15:737–752. https://doi.org/10.1177/026361749701501002
Banat F, Al-Asheh S, Al-Ahmad R, Bni-Khalid F (2007) Bench-scale and packed bed sorption of methylene blue using treated olive pomace and charcoal. Bioresour Technol 98:3017–3025. https://doi.org/10.1016/j.biortech.2006.10.023
González JF, González-García CM, Ramiro A et al (2004) Combustion optimisation of biomass residue pellets for domestic heating with a mural boiler. Biomass Bioenergy 27:145–154. https://doi.org/10.1016/j.biombioe.2004.01.004
Ioannou Z, Simitzis J (2013) Adsorption of methylene blue dye onto activated carbons based on agricultural by-products: equilibrium and kinetic studies. Water Sci Technol 67:1688. https://doi.org/10.2166/wst.2013.040
Ghanbari R, Anwar F, Alkharfy KM, et al (2012) Valuable nutrients and functional bioactives in different parts of olive (Olea europaea L.)—a review
Guinda A (2006) Use of solid residue from the olive industry. Grasas Aceites 57:107–115. https://doi.org/10.3989/gya.2006.v57.i1.26
Pattara C, Cappelletti GM, Cichelli A (2010) Recovery and use of olive stones: commodity, environmental and economic assessment. Renew Sust Energ Rev 14:1484–1489. https://doi.org/10.1016/j.rser.2010.01.018
Rodríguez G, Lama A, Rodríguez R et al (2008) Olive stone an attractive source of bioactive and valuable compounds. Bioresour Technol 99:5261–5269. https://doi.org/10.1016/j.biortech.2007.11.027
Romero-García JM, Niño L, Martínez-Patiño C et al (2014) Biorefinery based on olive biomass. State of the art and future trends. Bioresour Technol 159:421–432. https://doi.org/10.1016/j.biortech.2014.03.062
Ruiz E, Romero-García JM, Romero I et al (2017) Olive-derived biomass as a source of energy and chemicals. Biofuels Bioprod Biorefin 11:1077–1094. https://doi.org/10.1002/bbb.1812
Aguayo-Villarreal IA, Bonilla-Petriciolet A, Muñiz-Valencia R (2017) Preparation of activated carbons from pecan nutshell and their application in the antagonistic adsorption of heavy metal ions. J Mol Liq 230:686–695. https://doi.org/10.1016/j.molliq.2017.01.039
McKay G (1979) Waste color removal from textile effluents. Am Dyestuff Rept 68(4):29–35
To M-H, Hadi P, Hui C-W et al (2017) Mechanistic study of atenolol, acebutolol and carbamazepine adsorption on waste biomass derived activated carbon. J Mol Liq 241:386–398. https://doi.org/10.1016/j.molliq.2017.05.037
Ho YS, McKay G (1999) Pseudo-second order model for sorption processes. Process Biochem 34(5):451–465
Lagergren S (1898) Zur theorie der sogenannten adsorption gelo ̈ ster stoffe. Kungliga Svenska Vetenskapsakademiens. Handlingar 24(4):1–39
Lopes ECN, Dos Anjos FSC, Vieira EFS, Cestari AR (2003) An alternative Avrami equation to evaluate kinetic parameters of the interaction of Hg(II) with thin chitosan membranes. J Colloid Interface Sci 263(2):542–547
Wu F-C, Tseng RL, Juang RS (2009) Characteristics of Elovich equation used for the analysis of adsorption kinetics in dye-chitosan systems. Chem Eng J 150(2–3):366–373
Varma AJ, Deshpande SV, Kennedy JF (2004) Metal complexation by chitosan and its derivatives: a review. Carbohydr Polym 55(1):77–93
Abe I, Fukuhara T, Iwasaki S et al (2001) Development of a high density carbonaceous adsorbent from compressed wood. Carbon NY 39:1485–1490. https://doi.org/10.1016/S0008-6223(00)00273-6
Lavanya C, Balakrishna RG, Soontarapa K, Padaki MS (2019) Fouling resistant functional blend membrane for removal of organic matter and heavy metal ions. J Environ Manag 232:372–381. https://doi.org/10.1016/j.jenvman.2018.11.093
Hosono M, Arai H, Aizawa M et al (1993) Decoloration and degradation of azo dye in aqueous solution supersaturated with oxygen by irradiation of high-energy electron beams. Appl Radiat Isot 44:1199–1203. https://doi.org/10.1016/0969-8043(93)90064-H
Bayramoglu M, Eyvaz M, Kobya M (2007) Treatment of the textile wastewater by electrocoagulation. Chem Eng J 128:155–161. https://doi.org/10.1016/j.cej.2006.10.008
Slokar YM, Majcen Le Marechal A (1998) Methods of decoloration of textile wastewaters. Dyes Pigments 37:335–356. https://doi.org/10.1016/S0143-7208(97)00075-2
Kanakaraju D, Glass BD, Oelgemöller M (2018) Advanced oxidation process-mediated removal of pharmaceuticals from water: a review. J Environ Manag 219:189–207. https://doi.org/10.1016/j.jenvman.2018.04.103
Sarasa J, Roche M, Ormad M et al (1998) Treatment of a wastewater resulting from dyes manufacturing with ozone and chemical coagulation. Water Res 32:2721–2727. https://doi.org/10.1016/S0043-1354(98)00030-X
Chandra TC, Mirna MM, Sudaryanto Y, Ismadji S (2007) Adsorption of basic dye onto activated carbon prepared from durian shell: studies of adsorption equilibrium and kinetics. Chem Eng J 127:121–129. https://doi.org/10.1016/j.cej.2006.09.011
Guo J, Lua AC (2003) Adsorption of sulphur dioxide onto activated carbon prepared from oil-palm shells with and without pre-impregnation. Sep Purif Technol 30:265–273. https://doi.org/10.1016/S1383-5866(02)00166-1
Mackay DM, Roberts PV (1982b) The dependence of char and carbon yield on lignocellulosic precursor composition. Carbon NY 20:87–94. https://doi.org/10.1016/0008-6223(82)90412-2
Hu X, Lei L, Chen G, Yue PL (2001) On the degradability of printing and dyeing wastewater by wet air oxidation. Water Res 35:2078–2080. https://doi.org/10.1016/S0043-1354(00)00481-4
Hislop KA, Bolton JR (1999) The photochemical generation of hydroxyl radicals in the UV−vis/ferrioxalate/H2O2 system. Environ Sci Technol 33:3119–3126. https://doi.org/10.1021/es9810134
Jeong J, Yoon J (2005) pH effect on OH radical production in photo/ferrioxalate system. Water Res 39:2893–2900. https://doi.org/10.1016/j.watres.2005.05.014
Sillanpää M, Ncibi MC, Matilainen A, Vepsäläinen M (2018) Removal of natural organic matter in drinking water treatment by coagulation: a comprehensive review. Chemosphere 190:54–71. https://doi.org/10.1016/j.chemosphere.2017.09.113
Chen Q, Yao Y, Li X et al (2018) Comparison of heavy metal removals from aqueous solutions by chemical precipitation and characteristics of precipitates. J Water Process Eng 26:289–300. https://doi.org/10.1016/j.jwpe.2018.11.003
Vaghela SS, Jethva AD, Mehta BB et al (2005) Laboratory studies of electrochemical treatment of industrial azo dye effluent. Environ Sci Technol 39:2848–2855. https://doi.org/10.1021/es035370c
Bell J, Buckley CA (2003) Treatment of a textile dye in the anaerobic baffled reactor. Water SA. https://doi.org/10.4314/wsa.v29i2.4847
Bhatia V, Dhir A, Ray AK (2018) Integration of photocatalytic and biological processes for treatment of pharmaceutical effluent. J Photochem Photobiol A Chem 364:322–327. https://doi.org/10.1016/j.jphotochem.2018.06.027
Jacob JM, Karthik C, Saratale RG et al (2018) Biological approaches to tackle heavy metal pollution: a survey of literature. J Environ Manag 217:56–70. https://doi.org/10.1016/j.jenvman.2018.03.077
Suresh A, Grygolowicz-Pawlak E, Pathak S et al (2018) Understanding and optimization of the flocculation process in biological wastewater treatment processes: a review. Chemosphere 210:401–416. https://doi.org/10.1016/j.chemosphere.2018.07.021
Banat IM, Nigam P, Singh D, Marchant R (1996) Microbial decolorization of textile-dyecontaining effluents: A review. Bioresource Technology, 58(3):217–227. https://doi.org/10.1016/S0960-8524(96)00113-7
Attia AA, Girgis BS, Khedr SA (2003) Capacity of activated carbon derived from pistachio shells by H3PO4 in the removal of dyes and phenolics. J Chem Technol Biotechnol 78:611–619. https://doi.org/10.1002/jctb.743
Chen B, Hui CW, McKay G (2001) Film-pore diffusion modeling and contact time optimization for the adsorption of dyestuffs on pith. Chem Eng J 84:77–94. https://doi.org/10.1016/S1385-8947(01)00193-0
Mckay G (2007) The adsorption of dyestuffs from aqueous solutions using activated carbon. III. Intraparticle diffusion processes. J Chem Technol Biotechnol Chem Technol 33:196–204. https://doi.org/10.1002/jctb.504330406
Paul B, Dynes JJ, Chang W (2017) Modified zeolite adsorbents for the remediation of potash brine-impacted groundwater: built-in dual functions for desalination and pH neutralization. Desalination 419:141–151. https://doi.org/10.1016/j.desal.2017.06.009
Lam KF, Yeung KL, McKay G (2006) An investigation of gold adsorption from a binary mixture with selective mesoporous silica adsorbents. J Phys Chem B 110:2187–2194. https://doi.org/10.1021/jp055577n
Millar GJ, Couperthwaite SJ, Dawes LA et al (2017) Activated alumina for the removal of fluoride ions from high alkalinity groundwater: new insights from equilibrium and column studies with multicomponent solutions. Sep Purif Technol 187:14–24. https://doi.org/10.1016/j.seppur.2017.06.042
Chen S-B, Zhu Y-G, Ma Y-B, McKay G (2006) Effect of bone char application on Pb bioavailability in a Pb-contaminated soil. Environ Pollut 139:433–439. https://doi.org/10.1016/j.envpol.2005.06.007
Choy KKH, McKay G (2005) Sorption of cadmium, copper, and zinc ions onto bone char using crank diffusion model. Chemosphere 60:1141–1150. https://doi.org/10.1016/j.chemosphere.2004.12.041
Choy KK, Ko DC, Cheung CW et al (2004) Film and intraparticle mass transfer during the adsorption of metal ions onto bone char. J Colloid Interface Sci 271:284–295. https://doi.org/10.1016/j.jcis.2003.12.015
Ko DCK, Porter JF, McKay G (2005) Application of the concentration-dependent surface diffusion model on the multicomponent fixed-bed adsorption systems. Chem Eng Sci 60:5472–5479. https://doi.org/10.1016/j.ces.2005.04.048
Baldikova E, Mullerova S, Prochazkova J et al (2018) Use of waste Japonochytrium sp. biomass after lipid extraction as an efficient adsorbent for triphenylmethane dye applied in aquaculture. Biomass Convers Biorefinery. https://doi.org/10.1007/s13399-018-0362-2
Crini G (2006) Non-conventional low-cost adsorbents for dye removal: a review. Bioresour Technol 97:1061–1085. https://doi.org/10.1016/j.biortech.2005.05.001
Lou Z, Zhang W, Hu X, Zhang H (2017) Synthesis of a novel functional group-bridged magnetized bentonite adsorbent: characterization, kinetics, isotherm, thermodynamics and regeneration. Chin J Chem Eng 25:587–594. https://doi.org/10.1016/j.cjche.2016.10.010
Allen SJ, McKay G, Khader KYH (2007) Equilibrium adsorption isotherms for basic dyes onto lignite. J Chem Technol Biotechnol 45:291–302. https://doi.org/10.1002/jctb.280450406
Islam MA, Ahmed MJ, Khanday WA et al (2017) Mesoporous activated coconut shell-derived hydrochar prepared via hydrothermal carbonization-NaOH activation for methylene blue adsorption. J Environ Manag 203:237–244. https://doi.org/10.1016/j.jenvman.2017.07.029
Saleem J, Mckay G (2016) Waste HDPE bottles for selective oil sorption. https://doi.org/10.1002/apj
Saleem J, Ning C, Barford J, McKay G (2015) Combating oil spill problem using plastic waste. Waste Manag 44:34–38. https://doi.org/10.1016/j.wasman.2015.06.003
Saleem J, Adil Riaz M, Gordon M (2018) Oil sorbents from plastic wastes and polymers: a review. J Hazard Mater 341:424–437. https://doi.org/10.1016/j.jhazmat.2017.07.072
Cheung W, Ng J, Mckay G (2003) Kinetic analysis of the sorption of copper(II) ions on chitosan. J Chem Technol Biotechnol 78:562–571. https://doi.org/10.1002/jctb.836
McKay G, Blair HS, Gardner J (1983) The adsorption of dyes in chitin. III. Intraparticle diffusion processes. J Appl Polym Sci 28:1767–1778. https://doi.org/10.1002/app.1983.070280519
Al-Asheh S, Banat F, Al-Lagtah N (2004) Separation of ethanol–water mixtures using molecular sieves and biobased adsorbents. Chem Eng Res Des 82:855–864. https://doi.org/10.1205/0263876041596779
Gui X, Li H, Wang K et al (2011) Recyclable carbon nanotube sponges for oil absorption. Acta Mater 59:4798–4804. https://doi.org/10.1016/j.actamat.2011.04.022
Kyzas G, Travlou N, Kalogirou O, Deliyanni E (2013) Magnetic graphene oxide: effect of preparation route on reactive black 5 adsorption. Materials (Basel) 6:1360–1376. https://doi.org/10.3390/ma6041360
Lee VKC, Porter JF, McKay G (2001) Modified design model for the adsorption of dye onto peat. Food Bioprod Process 79:21–26. https://doi.org/10.1205/09603080151123326
Parada MS, Fernández K (2017) Modelling the hydrophilic extraction of the bark of Eucalyptus nitens and Eucalyptus globulus: adsorption isotherm and thermodynamic studies. Ind Crop Prod 109:558–569. https://doi.org/10.1016/j.indcrop.2017.08.059
Ho YS, McKay G (1998b) Sorption of dye from aqueous solution by peat. Chem Eng J 70:115–124. https://doi.org/10.1016/S0923-0467(98)00076-1
Foo KY, Hameed BH (2012) Mesoporous activated carbon from wood sawdust by K2CO3 activation using microwave heating. Bioresour Technol 111:425–432. https://doi.org/10.1016/j.biortech.2012.01.141
Wu F-C, Tseng R-L (2006) Preparation of highly porous carbon from fir wood by KOH etching and CO2 gasification for adsorption of dyes and phenols from water. J Colloid Interface Sci 294:21–30. https://doi.org/10.1016/j.jcis.2005.06.084
Ahmada A, Loh M, Aziz J (2007) Preparation and characterization of activated carbon from oil palm wood and its evaluation on methylene blue adsorption. Dyes Pigments 75:263–272. https://doi.org/10.1016/j.dyepig.2006.05.034
El-Sheikh AH, Alzawahreh AM, Sweileh JA (2011) Preparation of an efficient sorbent by washing then pyrolysis of olive wood for simultaneous solid phase extraction of chloro-phenols and nitro-phenols from water. Talanta 85:1034–1042. https://doi.org/10.1016/j.talanta.2011.05.016
Sahu JN, Acharya J, Meikap BC (2010) Optimization of production conditions for activated carbons from tamarind wood by zinc chloride using response surface methodology. Bioresour Technol 101:1974–1982. https://doi.org/10.1016/j.biortech.2009.10.031
Chan LS, Cheung WH, Allen SJ, McKay G (2012a) Error analysis of adsorption isotherm models for acid dyes onto bamboo derived activated carbon. Chin J Chem Eng 20:535–542. https://doi.org/10.1016/S1004-9541(11)60216-4
Ip AWM, Barford JP, McKay G (2008) Production and comparison of high surface area bamboo derived active carbons. Bioresour Technol 99:8909–8916. https://doi.org/10.1016/j.biortech.2008.04.076
Wang L (2012) Application of activated carbon derived from ‘waste’ bamboo culms for the adsorption of azo disperse dye: kinetic, equilibrium and thermodynamic studies. J Environ Manag 102:79–87. https://doi.org/10.1016/j.jenvman.2012.02.019
Angın D, Altintig E, Köse TE (2013) Influence of process parameters on the surface and chemical properties of activated carbon obtained from biochar by chemical activation. Bioresour Technol 148:542–549. https://doi.org/10.1016/j.biortech.2013.08.164
McKay G, Yee TF, Nassar MM, Magdy Y (1998) Fixed-bed adsorption of dyes on bagasse pith. Adsorpt Sci Technol 16:623–639. https://doi.org/10.1177/026361749801600804
Valix M, Cheung WH, McKay G (2004) Preparation of activated carbon using low temperature carbonisation and physical activation of high ash raw bagasse for acid dye adsorption. Chemosphere 56:493–501. https://doi.org/10.1016/j.chemosphere.2004.04.004
Khalid M, Joly G, Renaud A, Magnoux P (2004) Removal of phenol from water by adsorption using zeolites. Ind Eng Chem Res 43(17):5275–5280. https://doi.org/10.1021/ie0400447
Guo Y, Rockstraw DA (2007) Activated carbons prepared from rice hull by one-step phosphoric acid activation. Microporous Mesoporous Mater 100:12–19. https://doi.org/10.1016/j.micromeso.2006.10.006
Balci S, Dohgu T, Yücel H (1994) Characterization of activated carbon produced from almond shell and hazelnut shell. J Chem Technol Biotechnol 60:419–426. https://doi.org/10.1002/jctb.280600413
Banerjee M, Bar N, Basu RK, Das SK (2017) Comparative study of adsorptive removal of Cr(VI) ion from aqueous solution in fixed bed column by peanut shell and almond shell using empirical models and ANN. Environ Sci Pollut Res 24:10604–10620. https://doi.org/10.1007/s11356-017-8582-8
Franco DSP, Cunha JM, Dortzbacher GF, Dotto GL (2017) Adsorption of Co(II) from aqueous solutions onto rice husk modified by ultrasound assisted and supercritical technologies. Process Saf Environ Prot 109:55–62. https://doi.org/10.1016/j.psep.2017.03.029
Lin L, Zhai S-R, Xiao Z-Y et al (2013) Dye adsorption of mesoporous activated carbons produced from NaOH-pretreated rice husks. Bioresour Technol 136:437–443. https://doi.org/10.1016/j.biortech.2013.03.048
Samarghandi MR, Hadi M, McKay G (2014) Breakthrough curve analysis for fixed-bed adsorption of azo dyes using novel pine cone-derived active carbon. Adsorpt Sci Technol 32:791–806. https://doi.org/10.1260/0263-6174.32.10.791
de Macedo JS, da Costa Júnior NB, Almeida LE et al (2006) Kinetic and calorimetric study of the adsorption of dyes on mesoporous activated carbon prepared from coconut coir dust. J Colloid Interface Sci 298:515–522. https://doi.org/10.1016/j.jcis.2006.01.021
Tsai W-T, Jiang T-J (2018) Mesoporous activated carbon produced from coconut shell using a single-step physical activation process. Biomass Convers Biorefinery 8:711–718. https://doi.org/10.1007/s13399-018-0322-x
Tan IAW, Hameed BH, Ahmad AL (2007) Equilibrium and kinetic studies on basic dye adsorption by oil palm fibre activated carbon. Chem Eng J 127:111–119. https://doi.org/10.1016/j.cej.2006.09.010
Girgis BS, Yunis SS, Soliman AM (2002) Characteristics of activated carbon from peanut hulls in relation to conditions of preparation. Mater Lett 57:164–172. https://doi.org/10.1016/S0167-577X(02)00724-3
Tahir N, Bhatti HN, Iqbal M, Noreen S (2017) Biopolymers composites with peanut hull waste biomass and application for crystal violet adsorption. Int J Biol Macromol 94:210–220. https://doi.org/10.1016/j.ijbiomac.2016.10.013
Kwiatkowski M, Broniek E (2017) An analysis of the porous structure of activated carbons obtained from hazelnut shells by various physical and chemical methods of activation. Colloids Surf A Physicochem Eng Asp 529:443–453. https://doi.org/10.1016/j.colsurfa.2017.06.028
Alimohammadi M, Saeedi Z, Akbarpour B et al (2017) Adsorptive removal of arsenic and mercury from aqueous solutions by eucalyptus leaves. Water Air Soil Pollut 228:429. https://doi.org/10.1007/s11270-017-3607-y
Biswas B, Pandey N, Bisht Y et al (2017) Pyrolysis of agricultural biomass residues: comparative study of corn cob, wheat straw, rice straw and rice husk. Bioresour Technol 237:57–63. https://doi.org/10.1016/j.biortech.2017.02.046
Wongcharee S, Aravinthan V, Erdei L, Sanongraj W (2017) Use of macadamia nut shell residues as magnetic nanosorbents. Int Biodeterior Biodegradation 124:276–287. https://doi.org/10.1016/j.ibiod.2017.04.004
Fadhil AB (2017) Evaluation of apricot (Prunus armeniaca L.) seed kernel as a potential feedstock for the production of liquid bio-fuels and activated carbons. Energy Convers Manag 133:307–317. https://doi.org/10.1016/j.enconman.2016.12.014
Merzougui Z, Azoudj Y, Bouchemel N, Addoun F (2011) Effect of activation method on the pore structure of activated carbon from date pits application to the treatment of water. Desalin Water Treat 29:236–240. https://doi.org/10.5004/dwt.2011.1420
Aygün A, Yenisoy-Karakaş S, Duman I (2003) Production of granular activated carbon from fruit stones and nutshells and evaluation of their physical, chemical and adsorption properties. Microporous Mesoporous Mater 66:189–195. https://doi.org/10.1016/j.micromeso.2003.08.028
Marsh H, Iley M, Berger J, Siemieniewska T (1975) The adsorptive properties of activated plum stone chars. Carbon NY 13:103–109. https://doi.org/10.1016/0008-6223(75)90266-3
Parlayıcı Ş, Pehlivan E (2017) Removal of metals by Fe3O4 loaded activated carbon prepared from plum stone (Prunus nigra): kinetics and modelling study. Powder Technol 317:23–30. https://doi.org/10.1016/j.powtec.2017.04.021
Chen CY, Garnica JI, Rodriguez MC, Duke, Costa RFD, Dicks AL, da JCD C (2007) Nafion/polyaniline/silica composite membranas for direct methanol fuel application. J Power Sources 166:324
Martins AF, de Cardoso AL, Stahl JA, Diniz J (2007) Low temperature conversion of rice husks, eucalyptus sawdust and peach stones for the production of carbon-like adsorbent. Bioresour Technol 98:1095–1100. https://doi.org/10.1016/j.biortech.2006.04.024
Molina-Sabio M, Caturla F, Rodriguez-Reinoso F (1995) Influence of the atmosphere used in the carbonization of phosphoric acid impregnated peach stones. Carbon NY 33:1180–1182. https://doi.org/10.1016/0008-6223(95)91248-6
Gergova K, Eser S (1996) Effects of activation method on the pore structure of activated carbons from apricot stones. Carbon NY 34:879–888. https://doi.org/10.1016/0008-6223(96)00028-0
Lussier MG, Shull JC, Miller DJ (1994) Activated carbon from cherry stones. Carbon NY 32:1493–1498. https://doi.org/10.1016/0008-6223(94)90144-9
Philip CA, Girgis BS (1996) Adsorption characteristics of microporous carbons from apricot stones activated by phosphoric acid. J Chem Technol Biotechnol 67:248–254. https://doi.org/10.1002/(SICI)1097-4660(199611)67:3<248::AID-JCTB557>3.0.CO;2-1
Uǧurlu M, Gürses A, Açikyildiz M (2008) Comparison of textile dyeing effluent adsorption on commercial activated carbon and activated carbon prepared from olive stone by ZnCl2 activation. Microporous Mesoporous Mater 111:228–235. https://doi.org/10.1016/j.micromeso.2007.07.034
Aboua KN, Yobouet YA, Yao KB et al (2015) Investigation of dye adsorption onto activated carbon from the shells of Macoré fruit. J Environ Manag 156:10–14. https://doi.org/10.1016/j.jenvman.2015.03.006
Ojedokun AT, Bello OS (2017) Liquid phase adsorption of Congo red dye on functionalized corn cobs. J Dispers Sci Technol 38:1285–1294. https://doi.org/10.1080/01932691.2016.1234384
Tsai WT, Chang CY, Lee SL (1997) Preparation and characterization of activated carbons from corn cob. Carbon NY 35:1198–1200. https://doi.org/10.1016/S0008-6223(97)84654-4
Wu F-C, Wu P-H, Tseng R-L, Juang R-S (2011) Preparation of novel activated carbons from H2SO4-pretreated corncob hulls with KOH activation for quick adsorption of dye and 4-chlorophenol. J Environ Manag 92:708–713. https://doi.org/10.1016/j.jenvman.2010.10.003
Chan OS, Cheung WH, McKay G (2012b) Single and multicomponent acid dye adsorption equilibrium studies on tyre demineralised activated carbon. Chem Eng J 191:162–170. https://doi.org/10.1016/j.cej.2012.02.089
Mui ELK, Cheung WH, Valix M, McKay G (2010) Mesoporous activated carbon from waste tyre rubber for dye removal from effluents. Microporous Mesoporous Mater 130(1–3):287–294
Wu B, Zhou MH (2009) Recycling of waste tyre rubber into oil absorbent. Waste Manag 29:355–359. https://doi.org/10.1016/j.wasman.2008.03.002
Bazargan A, Hui CW, McKay G (2013) Porous carbons from plastic waste in advances in polymer science. Springer, Berlin, pp 1–25
Kartel MT, Sych MV, Tsyba MM, Strelko VV (2006) Preparation of porous carbons by chemical activation of polyethyleneterephthalate. Carbon 44:1013–1024
Hadi P, Gao P, Barford JP, McKay G (2013) Novel application of the nonmetallic fraction of the recycled printed circuit boards as a toxic heavy metal adsorbent. J Hazard Mater 252–253:166–170. https://doi.org/10.1016/j.jhazmat.2013.02.037
Hadi P, Barford J, McKay G (2014a) Selective toxic metal uptake using an e-waste-based novel sorbent-single, binary and ternary systems. J Environ Chem Eng 2:332–339. https://doi.org/10.1016/j.jece.2014.01.004
Hadi P, Ning C, Ouyang W et al (2014b) Conversion of an aluminosilicate-based waste material to high-value efficient adsorbent. Chem Eng J 256:415–420. https://doi.org/10.1016/j.cej.2014.07.017
Hadi P, Xu M, Lin CSK et al (2015b) Waste printed circuit board recycling techniques and product utilization. J Hazard Mater 283:234–243. https://doi.org/10.1016/j.jhazmat.2014.09.032
Wong C-W, Barford JP, Chen G, McKay G (2014) Kinetics and equilibrium studies for the removal of cadmium ions by ion exchange resin. J Environ Chem Eng 2:698–707. https://doi.org/10.1016/j.jece.2013.11.010
Xu M, Hadi P, Chen G, McKay G (2014) Removal of cadmium ions from wastewater using innovative electronic waste-derived material. J Hazard Mater 273:118–123. https://doi.org/10.1016/j.jhazmat.2014.03.037
Zheng Y, Shen Z, Cai C et al (2009) The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites. J Hazard Mater 163:600–606. https://doi.org/10.1016/j.jhazmat.2008.07.008
Kwok KCM, Lee VKC, McKay G (2009) Novel model development for sorption of arsenate on chitosan. Chem Eng J 151(1–3):122–133
Lei S, Miyamoto J, Kanoh H et al (2006) Enhancement of the methylene blue adsorption rate for ultramicroporous carbon fiber by addition of mesopores. Carbon NY 44:1884–1890. https://doi.org/10.1016/j.carbon.2006.02.028
Matos M, Barreiro MF, Gandini A (2010) Olive stone as a renewable source of biopolyols. Ind Crop Prod 32:7–12. https://doi.org/10.1016/j.indcrop.2010.02.010
Bautista-Toledo MI, Rivera-Utrilla J, Ocampo-Pérez R et al (2014) Cooperative adsorption of bisphenol-A and chromium(III) ions from water on activated carbons prepared from olive-mill waste. Carbon NY 73:338–350. https://doi.org/10.1016/j.carbon.2014.02.073
Ubago-Pérez R, Carrasco-Marín F, Fairén-Jiménez D, Moreno-Castilla C (2006) Granular and monolithic activated carbons from KOH-activation of olive stones. Microporous Mesoporous Mater 92:64–70. https://doi.org/10.1016/j.micromeso.2006.01.002
Budinova T, Petrov N, Razvigorova M et al (2006) Removal of arsenic(III) from aqueous solution by activated carbons prepared from solvent extracted olive pulp and olive stones. Ind Eng Chem Res 45:1896–1901. https://doi.org/10.1021/ie051217a
Stavropoulos GG, Zabaniotou AA (2005) Production and characterization of activated carbons from olive-seed waste residue. Microporous Mesoporous Mater 82:79–85. https://doi.org/10.1016/j.micromeso.2005.03.009
Cimino G, Cappello RM, Caristi C, Toscano G (2005) Characterization of carbons from olive cake by sorption of wastewater pollutants. Chemosphere 61:947–955. https://doi.org/10.1016/j.chemosphere.2005.03.042
Galiatsatou P, Metaxas M, Kasselouri-Rigopoulou V (2002) Adsorption of zinc by activated carbons prepared from solvent extracted olive pulp. J Hazard Mater 91:187–203. https://doi.org/10.1016/S0304-3894(02)00008-0
Lafi WK (2001) Production of activated carbon from acorns and olive seeds. Biomass Bioenergy 20:57–62. https://doi.org/10.1016/S0961-9534(00)00062-3
Kula I, Uğurlu M, Karaoğlu H, Çelik A (2008) Adsorption of Cd(II) ions from aqueous solutions using activated carbon prepared from olive stone by ZnCl2 activation. Bioresour Technol 99:492–501. https://doi.org/10.1016/j.biortech.2007.01.015
Martín-Lara MA, Pagnanelli F, Mainelli S et al (2008) Chemical treatment of olive pomace: effect on acid-basic properties and metal biosorption capacity. J Hazard Mater 156:448–457. https://doi.org/10.1016/j.jhazmat.2007.12.035
Calero M, Ronda A, Martín-Lara MA et al (2013) Chemical activation of olive tree pruning to remove lead(II) in batch system: factorial design for process optimization. Biomass Bioenergy 58:322–332. https://doi.org/10.1016/j.biombioe.2013.08.021
Limousy L, Ghouma I, Ouederni A, Jeguirim M (2017) Amoxicillin removal from aqueous solution using activated carbon prepared by chemical activation of olive stone. Environ Sci Pollut Res 24:9993–10004. https://doi.org/10.1007/s11356-016-7404-8
Soudani N, Najar-Souissi S, Abderkader-Fernandez VK, Ouederni A (2017) Effects of nitrogen plasma treatment on the surface characteristics of olive stone-based activated carbon. Environ Technol 38:956–966. https://doi.org/10.1080/09593330.2016.1214626
Bohli T, Ouederni A (2016) Improvement of oxygen-containing functional groups on olive stones activated carbon by ozone and nitric acid for heavy metals removal from aqueous phase. Environ Sci Pollut Res 23:15852–15861. https://doi.org/10.1007/s11356-015-4330-0
Soudani N, Souissi-najar S, Ouederni A (2013) Influence of nitric acid concentration on characteristics of olive stone based activated carbon. Chin J Chem Eng 21:1425–1430. https://doi.org/10.1016/S1004-9541(13)60638-2
Aziz A, Elandaloussi EH, Belhalfaoui B et al (2009a) Efficiency of succinylated-olive stone biosorbent on the removal of cadmium ions from aqueous solutions. Colloids Surf B: Biointerfaces 73:192–198. https://doi.org/10.1016/j.colsurfb.2009.05.017
Aziz A, Ouali MS, Elandaloussi EH et al (2009b) Chemically modified olive stone: a low-cost sorbent for heavy metals and basic dyes removal from aqueous solutions. J Hazard Mater 163:441–447. https://doi.org/10.1016/j.jhazmat.2008.06.117
Silvestre-Albero A, Silvestre-Albero J, Sepúlveda-Escribano A, Rodríguez-Reinoso F (2009) Ethanol removal using activated carbon: effect of porous structure and surface chemistry. Microporous Mesoporous Mater 120:62–68. https://doi.org/10.1016/j.micromeso.2008.10.012
Bohli T, Ouederni A, Fiol N, Villaescusa I (2013) Single and binary adsorption of some heavy metal ions from aqueous solutions by activated carbon derived from olive stones. Desalin Water Treat:1–7. https://doi.org/10.1080/19443994.2013.859099
Temdrara L, Addoun A, Khelifi A (2015) Development of olivestones-activated carbons by physical, chemical and physicochemical methods for phenol removal: a comparative study. Desalin Water Treat 53:452–461. https://doi.org/10.1080/19443994.2013.838523
Halet F, Yeddou AR, Chergui A et al (2015) Removal of cyanide from aqueous solutions by adsorption on activated carbon prepared from lignocellulosic by-products. J Dispers Sci Technol 36:1736–1741. https://doi.org/10.1080/01932691.2015.1005311
Bohli T, Ouederni A, Fiol N, Villaescusa I (2015) Evaluation of an activated carbon from olive stones used as an adsorbent for heavy metal removal from aqueous phases. Comptes Rendus Chim 18:88–99. https://doi.org/10.1016/j.crci.2014.05.009
Blázquez G, Calero M, Ronda A et al (2014) Study of kinetics in the biosorption of lead onto native and chemically treated olive stone. J Ind Eng Chem 20:2754–2760. https://doi.org/10.1016/j.jiec.2013.11.003
Alslaibi TM, Abustan I, Ahmad MA, Foul AA (2013a) Comparison of activated carbon prepared from olive stones by microwave and conventional heating for iron (II), lead (II), and copper (II) removal from synthetic wastewater. Environ Prog Sustain Energy. https://doi.org/10.1002/ep.11877
Alslaibi TM, Abustan I, Ahmad MA, Abu Foul A (2014) Preparation of activated carbon from olive stone waste: optimization study on the removal of Cu2+, Cd2+, Ni2+, Pb2+, Fe2+, and Zn2+ from aqueous solution using response surface methodology. J Dispers Sci Technol 35:913–925. https://doi.org/10.1080/01932691.2013.809506
Abu-El-Sha’r WY, Gharaibeh SH, Mahmoud S (2000) Removal of dyes from aqueous solutions using low-cost sorbents made of solid residues from olive-mill wastes (JEFT) and solid residues from refined Jordanian oil shale. Environ Geol 39:1090–1094. https://doi.org/10.1007/s002549900099
Baçaoui A, Yaacoubi A, Dahbi A et al (2001) Optimization of conditions for the preparation of activated carbons from olive-waste cakes. Carbon NY 39:425–432. https://doi.org/10.1016/S0008-6223(00)00135-4
Al-Anber ZA, Matouq MAD (2008) Batch adsorption of cadmium ions from aqueous solution by means of olive cake. J Hazard Mater 151:194–201. https://doi.org/10.1016/j.jhazmat.2007.05.069
Stasinakis AS, Elia I, Petalas AV, Halvadakis CP (2008) Removal of total phenols from olive-mill wastewater using an agricultural by-product, olive pomace. J Hazard Mater 160:408–413. https://doi.org/10.1016/j.jhazmat.2008.03.012
Román S, González JF, González-García CM, Zamora F (2008) Control of pore development during CO2 and steam activation of olive stones. Fuel Process Technol 89:715–720. https://doi.org/10.1016/j.fuproc.2007.12.015
Albadarin AB, Mangwandi C (2015) Mechanisms of alizarin red S and methylene blue biosorption onto olive stone by-product: isotherm study in single and binary systems. J Environ Manag 164:86–93. https://doi.org/10.1016/j.jenvman.2015.08.040
Ghouma I, Jeguirim M, Dorge S et al (2015) Activated carbon prepared by physical activation of olive stones for the removal of NO2 at ambient temperature. Comptes Rendus Chim 18:63–74. https://doi.org/10.1016/j.crci.2014.05.006
Hernáinz F, Calero M, Blázquez G et al (2008) Comparative study of the biosorption of cadmium(II), chromium(III), and lead(II) by olive stone. Environ Prog 27:469–478. https://doi.org/10.1002/ep.10299
Calero M, Hernáinz F, Blázquez G et al (2008) Equilibrium modelling of Cr (VI) biosorption by olive stone, pp 827–836
Moubarik A, Grimi N (2015) Valorization of olive stone and sugar cane bagasse by-products as biosorbents for the removal of cadmium from aqueous solution. Food Res Int 73:169–175. https://doi.org/10.1016/j.foodres.2014.07.050
Hodaifa G, Alami SBD, Ochando-Pulido JM, Víctor-Ortega MD (2014) Iron removal from liquid effluents by olive stones on adsorption column: breakthrough curves. Ecol Eng 73:270–275. https://doi.org/10.1016/j.ecoleng.2014.09.049
Tsyntsarski B, Petrova B, Budinova T et al (2014) Removal of detergents from water by adsorption on activated carbons obtained from various precursors. Desalin Water Treat 52:3445–3452. https://doi.org/10.1080/19443994.2013.801327
Alslaibi TM, Abustan I, Ahmad MA, Foul AA (2013b) Application of response surface methodology (RSM) for optimization of Cu2+, Cd2+, Ni2+, Pb2+, Fe2+, and Zn2+ removal from aqueous solution using microwaved olive stone activated carbon. J Chem Technol Biotechnol 88:2141–2151. https://doi.org/10.1002/jctb.4073
Petrov N, Budinova T, Razvigorova M et al (2008) Conversion of olive wastes to volatiles and carbon adsorbents. Biomass Bioenergy 32:1303–1310. https://doi.org/10.1016/j.biombioe.2008.03.009
Spahis N, Addoun A, Mahmoudi H, Ghaffour N (2008) Purification of water by activated carbon prepared from olive stones. Desalination 222:519–527. https://doi.org/10.1016/j.desal.2007.02.065
Martínez ML, Torres MM, Guzmán CA, Maestri DM (2006) Preparation and characteristics of activated carbon from olive stones and walnut shells. Ind Crop Prod 23:23–28. https://doi.org/10.1016/j.indcrop.2005.03.001
Yakout SM, Sharaf El-Deen G (2016) Characterization of activated carbon prepared by phosphoric acid activation of olive stones. Arab J Chem 9:S1155–S1162. https://doi.org/10.1016/j.arabjc.2011.12.002
Demiral İ, Demiral H (2010) Surface characterization of activated carbons obtained from olive bagasse by chemical activation. Surf Interface Anal 42:1347–1350. https://doi.org/10.1002/sia.3294
Rodriguez-Valero M, Martinez-Escandell M, Molina-Sabio M, Rodriguez-Reinoso F (2001) CO2 activation of olive stones carbonized under pressure. Carbon NY 39:320–323
Borrero-López AM, Fierro V, Jeder A et al (2017) High added-value products from the hydrothermal carbonisation of olive stones. Environ Sci Pollut Res 24:9859–9869. https://doi.org/10.1007/s11356-016-7807-6
Guler UA, Ersan M, Tuncel E, Dügenci F (2016) Mono and simultaneous removal of crystal violet and safranin dyes from aqueous solutions by HDTMA-modified Spirulina sp. Process Saf Environ Prot 99:194–206. https://doi.org/10.1016/j.psep.2015.11.006
Fayazi M, Afzali D, Taher MA et al (2015) Removal of safranin dye from aqueous solution using magnetic mesoporous clay: optimization study. J Mol Liq 212:675–685. https://doi.org/10.1016/j.molliq.2015.09.045
Rotte NK, Yerramala S, Boniface J, Srikanth VVSS (2014) Equilibrium and kinetics of safranin O dye adsorption on MgO decked multi-layered graphene. Chem Eng J 258:412–419
Ghaedi M, Hajjati S, Mahmudi Z, Tyagi I, Agarwal S, Maity A, Gupta VK (2015) Modeling of competitive ultrasonic assisted removal of the dyes—methylene blue and safranin-O using Fe3O4 nanoparticles. Chem Eng J 268:28–37
Lu J, Zhang C, Wu J, Luo Y (2017) Adsorptive removal of bisphenol A using N-doped biochar made of Ulva prolifera. Water Air Soil Pollut 228:327. https://doi.org/10.1007/s11270-017-3516-0
Dehghani MH, Ghadermazi M, Bhatnagar A et al (2016) Adsorptive removal of endocrine disrupting bisphenol A from aqueous solution using chitosan. J Environ Chem Eng 4:2647–2655. https://doi.org/10.1016/j.jece.2016.05.011
Zheng S, Sun Z, Park Y, Ayoko GA, Frost RL (2013) Removal of bisphenol A from wastewater by Ca-montmorillonite modified with selected surfactants. Chem Eng J 234:416–422. https://doi.org/10.1016/j.cej.2013.08.115
Tounsadi H, Khalidi A, Abdennouri M, Barka N (2016a) Activated carbon from Diplotaxis harra biomass: optimization of preparation conditions and heavy metal removal. J Taiwan Inst Chem Eng 59:348–358. https://doi.org/10.1016/j.jtice.2015.08.014
Tounsadi H, Khalidi A, Machrouhi A et al (2016b) Highly efficient activated carbon from Glebionis coronaria L. biomass: optimization of preparation conditions and heavy metals removal using experimental design approach. J Environ Chem Eng 4:4549–4564. https://doi.org/10.1016/j.jece.2016.10.020
El-Azim HA, Seleman MME, Saad EM (2019) Applicability of water-spray electric arc furnace steel slag for removal of Cd and Mn ions from aqueous solutions and industrial wastewaters. J Environ Chem Eng 7(2):102915 https://doi.org/10.1016/j.jece.2019.102915
Du H, Qu CC, Liu J, Chen W, Cai P, Shi Z, Yu X-Y, Huang Q (2017) Molecular investigation on the binding of Cd(II) by the binary mixtures of montmorillonite with two bacterial species. Environ Pollut 229:871–878 https://doi.org/10.1016/j.envpol.2017.07.052
Safari E, Rahemi N, Kahforoushan D, Allahyari S (2019) Copper adsorptive removal from aqueous solution by orange peel residue carbon nanoparticles synthesized by combustion method using response surface methodology. J Environ Chem Eng 7:102847. https://doi.org/10.1016/j.jece.2018.102847
Hadi P, Xu M, Ning C et al (2015c) A critical review on preparation, characterization and utilization of sludge-derived activated carbons for wastewater treatment. Chem Eng J 260:895–906. https://doi.org/10.1016/j.cej.2014.08.088
Van Tran T, Bui QTP, Nguyen TD, Le NTH, Bach LG (2019) A comparative study on the removal efficiency of metal ions (Cu2+, Ni2+, and Pb2+) using sugarcane bagasse-derived ZnCl2-activated carbon by the response surface methodology. Adsorpt Sci Technol 35(1–2):72–85. https://doi.org/10.1177/0263617416669152
Geyikçi F, Kılıç E, Çoruh S, Elevli S (2012) Modelling of lead adsorption from industrial sludge leachate on red mud by using RSM and ANN. Chem Eng J 183:53–59. https://doi.org/10.1016/j.cej.2011.12.019
Cincotti A, Lai N, Orrù R, Cao G (2001) Sardinian natural clinoptilolites for heavy metals and ammonium removal: experimental and modeling. Chem Eng J 84(3):275–282. https://doi.org/10.1016/S1385-8947(00)00286-2
Koong LF, Lam KF, Barford J, McKay G (2013) A comparative study on selective adsorption of metal ions using aminated adsorbents. J Colloid Interface Sci 395:230–240
Nemchi F, Bestani B, Benderdouche N, Belhakem M, Duclaux L (2017) Enhancement of Ni2+ removal capacity of activated carbons obtained from Mediterranean Ulva lactuca and Systoceira stricta algal species. J Environ Chem Eng 5(3):2337–2345 https://doi.org/10.1016/j.jece.2017.03.027
Hameed B, Din A, Ahmad A (2007) Adsorption of methylene blue onto bamboo-based activated carbon: kinetics and equilibrium studies. J Hazard Mater 141:819–825. https://doi.org/10.1016/j.jhazmat.2006.07.049
Kumar A, Jena HM (2016) Removal of methylene blue and phenol onto prepared activated carbon from fox nutshell by chemical activation in batch and fixed-bed column. J Clean Prod 137:1246–1259. https://doi.org/10.1016/j.jclepro.2016.07.177
Chatterjee S, Kumar A, Basu S, Dutta S (2012) Application of response surface methodology for methylene blue dye removal from aqueous solution using low cost adsorbent. Chem Eng J 181–182:289–299
Lyu H, Gao B, He F, Zimmerman AR, Ding C, Tang J, Crittenden JC (2018) Experimental and modeling investigations of ball-milled biochar for the removal of aqueous methylene blue. Chem Eng J 335:110–119
El Nemr A, El-Sikaily A, Khaled A, Abdelwahab O (2015) Removal of toxic chromium from aqueous solution, wastewater and saline water by marine red alga Pterocladia capillacea and its activated carbon. Arab J Chem 8:105–117. https://doi.org/10.1016/j.arabjc.2011.01.016
Parlayici S, Eskizeybek V, Avcı A, Pehlivan E (2015) Removal of chromium (VI) using activated carbon-supported-functionalized carbon nanotubes. J Nanostructure Chem 5:255–263. https://doi.org/10.1007/s40097-015-0156-z
Zhong D, Zhang Y, Wang L, Chen J, Jiang Y, Tsang DCW, Zhao Z, Ren S, Liu Z, Crittenden JC (2018) Mechanistic insights into adsorption and reduction of hexavalent chromium from water using magnetic biochar composite: key roles of Fe3O4 and persistent free radicals. Environ Pollut 243(B):1302–1309. https://doi.org/10.1016/j.envpol.2018.08.093
Jeon C (2019) Removal of Cr(VI) from aqueous solution using amine-impregnated crab shells in the batch process. J Ind Eng Chem. https://doi.org/10.1016/j.jiec.2019.04.025
Choudhary B, Paul D (2018) Isotherms, kinetics and thermodynamics of hexavalent chromium removal using biochar. J Environ Chem Eng 6(2):2335–2343 https://doi.org/10.1016/j.jece.2018.03.028
Peres EC, Cunha JM, Dortzbacher GF, Pavan FA, Lima EC, Foletto EL, Dotto GL (2018) Treatment of leachates containing cobalt by adsorption on Spirulina sp. and activated charcoal. J Environ Chem Eng 6(1): 677–685. 10.1016/j.jece.2017.12.060
Anoop Krishnan K, Sreejalekshmi KG, Vimexen V, Dev VV (2016) Evaluation of adsorption properties of sulphurised activated carbon for the effective and economically viable removal of Zn(II) from aqueous solutions. Ecotoxicol Environ Saf 124:418–425. https://doi.org/10.1016/j.ecoenv.2015.11.018
Bestani B, Benderdouche N, Benstaali B et al (2008) Methylene blue and iodine adsorption onto an activated desert plant. Bioresour Technol 99:8441–8444. https://doi.org/10.1016/j.biortech.2008.02.053
Saka C (2012) BET, TG–DTG, FT-IR, SEM, iodine number analysis and preparation of activated carbon from acorn shell by chemical activation with ZnCl2. J Anal Appl Pyrolysis 95:21–24. https://doi.org/10.1016/j.jaap.2011.12.020
Rodrigues LA, Silva MLCP, Alvarez-Mendes MO, Coutinho ADR, Thim GP (2011) Phenol removal from aqueous solution by activated carbon produced from avocado kernel seeds. Chem Eng J 174(1):49–57
Banat FA, Al-Bashir B, Al-Asheh HO (2000) Adsorption of phenol by bentonite. Environ Pollut 107(3):391–398. https://doi.org/10.1016/S0269-7491(99)00173-6
Sze MFF, McKay G (2010) An adsorption diffusion model for removal of para-chlorophenol by activated carbon derived from bituminous coal. Environ Pollut 158(5):1669–1674
Funding
Open Access funding provided by the Qatar National Library.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Saleem, J., Shahid, U., Hijab, M. et al. Production and applications of activated carbons as adsorbents from olive stones. Biomass Conv. Bioref. 9, 775–802 (2019). https://doi.org/10.1007/s13399-019-00473-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13399-019-00473-7