Articles

1. Evaluation of microstructure and toughness of SAW steel weld metals with optimum Al/O ratio

   • Kangmyung Seo
   • Yongjoon Kang
   • Namhyun Kang

   Research Paper 05 March 2024

   

2. Thermal and microstructural analysis of intersections manufactured by wire arc additive manufacturing (WAAM)

   • Bruno Maciel Sousa
   • Fagner Guilherme Ferreira Coelho
   • Nilo Nogueira da Silva

   Research Paper 05 March 2024

   

3. Effects of different heating strategies on the joint properties during infrared welding of glass fiber reinforced polyamide 6

   • Karina Gevers
   • Lucas Schraa
   • Markus Stommel

   Research Paper Open access 05 March 2024

   

4. Fatigue strength of single-sided fillet welds in overlapping ultra-high-strength steel sheets

   • Antti Ahola
   • Samu Salerto
   • Timo Björk

   Research Paper Open access 04 March 2024 Pages: 1225 - 1239

   

5. The weldability in dissimilar joints of AA5052 and SPFC780DP steel by hybrid friction stir welding

   • Hee-Seon Bang
   • Dong-Min Park
   • Kyoung-Hak Kim

   Research Paper 04 March 2024

   

6. Stresses in repair welding of high-strength steels—part 2: heat control and stress optimization

   • Dirk Schröpfer
   • Julien Witte
   • Thomas Kannengiesser

   Research Paper Open access 04 March 2024

   

7. Investigations on the influence of angular and linear misalignment on the fatigue strength of HFMI-treated structural steel butt joints

   • Benjamin Ripsch
   • Göran Gabriel
   • Knuth-Michael Henkel

   Research Paper Open access 02 March 2024 Pages: 1211 - 1224

   

8. Diagnostics of welded joint damaging of polyurethane foam insulated pipelines

   • Anatoly Dubov
   • Alexander Dubov
   • Artem Marchenkov

   Research Paper 02 March 2024

   

9. Evaluation of the fatigue resistance of butt-welded joints in towers of wind turbines — a comparison of experimental studies with small scale and component tests as well as numerical based approaches with local concepts

   • R. Glienke
   • F. Kalkowsky
   • K.-M. Henkel

   Research Paper Open access 29 February 2024 Pages: 1143 - 1168

   

10. Quality monitoring for a resistance spot weld process of galvanized dual-phase steel based on the electrode displacement

    • M. Ullrich
    • M. Wohner
    • S. Jüttner

    Research Paper Open access 29 February 2024

    

11. Impact of annotation quality on model performance of welding defect detection using deep learning

    • Jinhan Cui
    • Baoxin Zhang
    • Xinghua Yu

    Research Paper 28 February 2024 Pages: 855 - 865

    

12. Exploring the boundaries of refill friction stir spot welding: influence of short welding times on joint performance

    • Jonathan Draper
    • Sebastian Fritsche
    • Alexander Galloway

    Research Paper Open access 28 February 2024

    

13. Effect of gas metal arc welding on microstructure, microtexture, and mechanical properties of a new type Al–Mg-Er-Zr alloy

    • Peng Wang
    • Li Cui
    • Dingyong He

    Research Paper 26 February 2024 Pages: 1591 - 1609

    

14. Local mechanical properties of dissimilar metal TIG welded joints of CoCrFeMnNi high entropy alloy and AISI 304 austenitic steel

    • Michael Rhode
    • Kjell Erxleben
    • Thomas Michael

    Research Paper Open access 26 February 2024 Pages: 1563 - 1573

    

15. Enhancing joint performance in friction stir welding through tailored double-butt-lap geometry

    • Uttam Acharya
    • Smrity Choudhury
    • Barnik Saha Roy

    Research Paper Open access 26 February 2024 Pages: 1089 - 1101

    

16. Comparative study about the results of HAZ physical simulations on different high-strength steel grades

    • J. Kovács
    • M. Gáspár
    • A. Kaijalainen

    Research Paper Open access 24 February 2024

    

17. Development of electron optical capabilities for manufacturing of large components by electron beam welding

    • T. Dutilleul
    • R. Widdison
    • W. Kyffin

    Research Paper Open access 23 February 2024 Pages: 819 - 828

    

18. Investigation on the effect of heat input and clamping positions on residual stress and distortion of the 316L steel butt-welded joint by numerical simulation

    • Toai Dinh Vu
    • Xuan Thi Tran
    • Minh Ngoc Nguyen

    Research Paper 23 February 2024 Pages: 1071 - 1087

    

19. Nickel-plated SiC_p/Al composites brazed in the air: microstructure and mechanical properties of brazed joints under different processes

    • Dechao Qiu
    • Dongfeng Cheng
    • Josip Brnic

    Research Paper 23 February 2024

    

20. Evaluation of methods used for simulation of heat-affected zones in duplex stainless steels

    • E. M. Westin
    • L. G. Westerberg

    Research Paper Open access 23 February 2024

    

21. Efficient bead-on-plate weld model for parameter estimation towards effective wire arc additive manufacturing simulation

    • Dominic Strobl
    • Jörg F. Unger
    • Annika Robens-Radermacher

    Research Paper Open access 21 February 2024 Pages: 969 - 986

    

22. Multi-objective optimization of laser welding parameters for steel/Al based on Kriging-MSSA

    • Zhi-wei Zhu
    • Yong-huan Guo
    • Jun-yi Hua

    Research Paper 21 February 2024 Pages: 1271 - 1279

    

23. Process comparison of laser deep penetration welding in pure nickel using blue and infrared wavelengths

    • M. Möbus
    • R. Pordzik
    • T. Mattulat

    Research Paper Open access 21 February 2024 Pages: 1473 - 1484

    

24. Effect of Nd element on the microstructure and mechanical performance of brazed diamonds with Ni–Cr filler metal

    • Banglun Wang
    • Pengbo Wang
    • Dong Xu

    Research Paper 21 February 2024

    

25. Characteristics of high-temperature heat-affected zones in duplex stainless steels

    • E. M. Westin
    • S. Wessman

    Research Paper Open access 21 February 2024

    

26. Investigation of stress corrosion cracking of friction stir welded 2060 Al-Li alloy

    • Muhammad Usama Yameen
    • Khawar Hussain
    • Ameeq Farooq

    Research Paper 20 February 2024

    

27. Clarify the forming mechanism and affecting factors of defects in semi-stationary shoulder bobbin tool friction stir welding

    • Wen Quan
    • Li Wenya
    • Klusemann Benjamin

    Research Paper 20 February 2024

    

28. Editorial: Recent innovations in intelligent welding manufacturing

    • YuMing Zhang
    • Stephan Egerland

    Editorial 19 February 2024 Pages: 729 - 730

29. Structural hot-spot stress approach for toe cracking from plate edge of load-carrying welded attachment

    • Takeshi Hanji
    • Kazuo Tateishi
    • Masaru Shimizu

    Research Paper 17 February 2024 Pages: 1201 - 1209

    

30. The effect of thermomechanical welding on the microstructure and mechanical properties of S700MC steel welds

    • Peng Wang
    • Felipe Martins Gomes
    • Norbert Enzinger

    Research Paper Open access 15 February 2024 Pages: 1053 - 1069

    

31. Feasibility analysis for the application of conduction tracks on textiles by means of laser radiation

    • F. Brackmann
    • M. Brosda
    • J. Sonnenschein

    Research Paper Open access 14 February 2024

    

32. Fatigue behaviour of automatically HFMI-treated welds

    • Lea Wendler
    • Daniel Löschner
    • Imke Engelhardt

    Research Paper Open access 14 February 2024

    

33. The mechanism of element inhomogeneity in TW-DED-arc fabricated γ-TiAl alloy

    • Jianwen Xin
    • Fang Li
    • Xueming Hua

    Research Paper 13 February 2024 Pages: 953 - 968

    

34. Dual optimization of energy-absorbing intermediate layer for diversified enhancement of heterogeneous brazed joints

    • Ying Zhu
    • Yu Zhang
    • Hongqiang Zhang

    Research Paper 13 February 2024

    

35. Effect of solution heat treatment on the microstructure and mechanical properties of laser melting deposited GH 5188 superalloy

    • Yan Wang
    • Wei Liu
    • Huaping Xiong

    Research Paper 12 February 2024 Pages: 939 - 951

    

36. Plasma wire arc additive manufacturing and its influence on high-carbon steel substrate properties

    • Matthias Moschinger
    • Thomas Vauderwange
    • Norbert Enzinger

    Research Paper Open access 12 February 2024

    

37. Effects of post-weld heat treatment on the microstructure and properties of the matching SMAW filler metal for weld joints in MarBN steel

    • Zhuyao Zhang
    • Steve Roberts
    • Mark A. E. Jepson

    Research Paper Open access 08 February 2024 Pages: 1549 - 1561

    

38. Flow and hardening behavior in the heat-affected zone of welded ultra-high strength steels

    • Shahriar Afkhami
    • Mohsen Amraei
    • Xiao-Lin Zhao

    Research Paper Open access 08 February 2024 Pages: 1001 - 1016

    

39. Predicting porosity in wire arc additive manufacturing (WAAM) using wavelet scattering networks and sparse principal component analysis

    • Joselito Yam Alcaraz II
    • Abhay Sharma
    • Tegoeh Tjahjowidodo

    Research Paper 07 February 2024 Pages: 843 - 853

    

40. A review on recent developments in ultrasonic welding of polymers and polymeric composites

    • Sandeep Bose
    • H. Chelladurai
    • K. Ponappa

    Review Article 07 February 2024

    

41. Composition design for modified nickel nanopastes containing a low-melting element as additive for pressureless nanojoining

    • Benjamin Sattler
    • Susann Hausner
    • Guntram Wagner

    Research Paper Open access 07 February 2024

    

42. Effect of laser cleaning the anodized surface of 5083 aluminum alloy on weld quality

    • Wei Wang
    • Qingyu Jiang
    • Jia Wang

    Research Paper 06 February 2024 Pages: 1281 - 1295

    

43. On the interpretation of Varestraint and Transvarestraint hot cracking test results

    • Arne Kromm
    • Maximilian Thomas
    • Jens Gibmeier

    Research Paper Open access 05 February 2024 Pages: 715 - 727

    

44. Effect of liquid nitrogen cryogenic cooling during wire arc directed energy deposition of nickel aluminum bronze

    • Alexey Kuprienko
    • Jacob Stickle
    • Carolin Fink

    Research Paper 05 February 2024 Pages: 515 - 524

    

45. Surface enhancement of metallic alloys by laser precision engineering

    • Mingze Xin
    • Zeming Fan
    • Yingchun Guan

    Research Paper 03 February 2024

    

46. Comparison of fatigue life and crack initiation of tubular joints due to the difference in the brace position

    • Shazia Muzaffer
    • Kyong-Ho Chang
    • Mikihito Hirohata

    Research Paper 01 February 2024 Pages: 1033 - 1051

    

47. Comparison of fatigue test results of high-strength steel DED-Arc specimens with milled and unmilled surfaces

    • Johanna Müller
    • Jairan Nafar Dastgerdi
    • Jonas Hensel

    Research Paper Open access 31 January 2024 Pages: 1187 - 1199

    

48. Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds

    • Konstantin Manuel Prabitz
    • Thomas Antretter
    • Werner Ecker

    Research Paper Open access 30 January 2024

    

49. Influence of Ni additions on microstructure, non-magnetic properties, and wear resistance of Fe–Mn-Cr alloy deposited by metal-cored arc welding

    • Zhiheng Qin
    • Dingyong He
    • Guohong Wang

    Research Paper 27 January 2024 Pages: 699 - 714

    

50. Robustness investigation of an in-situ absorption measurement system for laser processing

    • Moritz Wittemer
    • Katrin Wudy

    Research Paper Open access 26 January 2024 Pages: 1461 - 1472