1. ACMT - conference on Advanced and Competitive Manufacturing Technologies in Moscow

   • Andrey Kutin
   • Konrad Wegener

   Editorial 23 August 2021 Pages: 2011 - 2012

2. Design optimization of multimorphology surface-based lattice structures with density gradients

   • Xin Shi
   • Wenhe Liao
   • Fangxi Ren

   ORIGINAL ARTICLE 07 May 2021 Pages: 2013 - 2028

   

3. The role of scanning velocity on laser cladding of NiTi alloy onto stainless steel 316L substrate

   • Kian Zarghami
   • Saeed Khademzadeh
   • Yashar Azarmehr

   ORIGINAL ARTICLE 19 May 2021 Pages: 2029 - 2039

   

4. Flexural quasi-static and fatigue behaviours of fused filament deposited PA6 and PA12 polymers

   • Terekhina Svetlana
   • Tarasova Tatiana
   • Hattali Lamine

   ORIGINAL ARTICLE 17 May 2021 Pages: 2041 - 2048

   

5. Influence of packing density and fillers on thermal conductivity of polymer powders for additive manufacturing

   • Francesco Sillani
   • Fabian de Gasparo
   • Konrad Wegener

   ORIGINAL ARTICLE Open access 10 May 2021 Pages: 2049 - 2058

   

6. Extrusion-based additive manufacturing of forming and molding tools

   • Matteo Strano
   • Kedarnath Rane
   • Michele Monno

   ORIGINAL ARTICLE Open access 04 May 2021 Pages: 2059 - 2071

   

7. Experimental comparative investigation on creep behavior of mineral cast, ultra-high-performance concrete, and natural stone for precision machinery structures

   • Eduard Relea
   • Benjamin Pfyffer
   • Konrad Wegener

   ORIGINAL ARTICLE Open access 23 April 2021 Pages: 2073 - 2081

   

8. Effect of clad height, substrate thickness and scanning pattern on cantilever distortion in direct metal deposition

   • Fabian Soffel
   • Daniel Eisenbarth
   • Konrad Wegener

   ORIGINAL ARTICLE Open access 01 April 2021 Pages: 2083 - 2091

   

9. Residual stress reduction of LPBF-processed CM247LC samples via multi laser beam strategies

   • Marcel Gerstgrasser
   • Michael Cloots
   • Konrad Wegener

   ORIGINAL ARTICLE Open access 30 April 2021 Pages: 2093 - 2103

   

10. Process characterization and analysis of ceramic powder bed fusion

    • Kevin Florio
    • Dario Puccio
    • Konrad Wegener

    ORIGINAL ARTICLE Open access 27 July 2021 Pages: 2105 - 2116

    

11. Development of elastic–plastic model of additively produced titanium for personalised endoprosthetics

    • Alexey Borovkov
    • Leonid Maslov
    • Dmitry Solovev

    ORIGINAL ARTICLE Open access 01 July 2021 Pages: 2117 - 2132

    

12. A study on power-controlled wire-arc additive manufacturing using a data-driven surrogate model

    • Rameez Israr
    • Johannes Buhl
    • Markus Bambach

    ORIGINAL ARTICLE Open access 22 June 2021 Pages: 2133 - 2147

    

13. Experimental investigation of the effects of cryogenic cooling on tool life in Ti6Al4V milling

    • Paolo Albertelli
    • Valerio Mussi
    • Michele Monno

    ORIGINAL ARTICLE Open access 06 May 2021 Pages: 2149 - 2161

    

14. Grinding efficiency and profile accuracy of diamond grinding wheels dressed with wire electrical discharge conditioning (WEDC)

    • Ali Zahedi
    • Jahangir Khosravi
    • Bahman Azarhoushang

    ORIGINAL ARTICLE Open access 14 June 2021 Pages: 2163 - 2171

    

15. An experimental investigation on Inconel 718 interrupted cutting with ceramic solid end mills

    • Paolo Parenti
    • Francesco Puglielli
    • Michele Monno

    ORIGINAL ARTICLE Open access 29 May 2021 Pages: 2173 - 2184

    

16. Influence of the frequency of pulsating high-pressure cutting fluid jets on the resulting chip length and surface finish

    • Antonia Splettstoesser
    • Daniel Schraknepper
    • Thomas Bergs

    ORIGINAL ARTICLE Open access 17 May 2021 Pages: 2185 - 2196

    

17. Experimental investigation of the machining characteristics in diamond wire sawing of unidirectional CFRP

    • Lukas Seeholzer
    • Stefan Süssmaier
    • Konrad Wegener

    ORIGINAL ARTICLE Open access 09 June 2021 Pages: 2197 - 2212

    

18. International Conference on Advanced and Competitive Manufacturing Technologies milling tool wear prediction using unsupervised machine learning

    • Thomas Gittler
    • Magnus Glasder
    • Konrad Wegener

    ORIGINAL ARTICLE Open access 24 May 2021 Pages: 2213 - 2226

    

19. Grain flash temperatures in diamond wire sawing of silicon

    • Uygar Pala
    • Stefan Süssmaier
    • Konrad Wegener

    ORIGINAL ARTICLE Open access 11 June 2021 Pages: 2227 - 2236

    

20. Buildup forming on tools at mechanical metal surface-hardening

    • Sergey Egorov
    • Andrej Olejnik
    • Islam Alexandrov

    ORIGINAL ARTICLE 08 June 2021 Pages: 2237 - 2242

    

21. Design of a contactless powered and piezoelectric-actuated tool for non-resonant low-frequency vibration-assisted machining of brittle-hard materials

    • Jens Brier
    • Friedrich Bleicher

    Application Open access 23 June 2021 Pages: 2243 - 2253

    

22. Combined robot-based manufacturing and machining of multi-material components

    • Marcel Droß
    • Max Albergt
    • Klaus Dröder

    ORIGINAL ARTICLE Open access 24 April 2021 Pages: 2255 - 2262

    

23. Multivariate manufacturing process planning for aircraft airframe production based on weighted criteria analysis

    • Andrey Kutin
    • Mikhail Turkin
    • Mikhail Kliuev

    ORIGINAL ARTICLE 21 May 2021 Pages: 2263 - 2268

    

24. Investigations on digitalization for sustainable machine tools and forming technologies

    • Philipp Klimant
    • Hans-Joachim Koriath
    • Sven Winkler

    ORIGINAL ARTICLE Open access 15 May 2021 Pages: 2269 - 2277

    

25. Implementation specifics and application potential of digital twins of technological systems

    • Marina Brovkova
    • Vladimir Molodtsov
    • Victor Bushuev

    ORIGINAL ARTICLE 28 April 2021 Pages: 2279 - 2286

    

26. Automation technology as a key component of the Industry 4.0 production development path

    • Christian Brecher
    • Aleksandra Müller
    • Simon Storms

    ORIGINAL ARTICLE Open access 20 May 2021 Pages: 2287 - 2295

    

27. Machine learning and simulation-based surrogate modeling for improved process chain operation

    • André Hürkamp
    • Sebastian Gellrich
    • Sebastian Thiede

    ORIGINAL ARTICLE Open access 19 May 2021 Pages: 2297 - 2307

    

28. Method for clustering and identification of objects in laser scanning point clouds using dynamic logic

    • Yevgeny Milanov
    • Vladimir Badenko
    • Leonid Perlovsky

    ORIGINAL ARTICLE 28 May 2021 Pages: 2309 - 2318

    

29. Action recognition for the robotics and manufacturing automation using 3-D binary micro-block difference

    • Viacheslav Voronin
    • Marina Zhdanova
    • Sos Agaian

    ORIGINAL ARTICLE 09 July 2021 Pages: 2319 - 2330

    

30. Control of the machine tools with variable kinematics

    • Georgi M. Martinov
    • Sergey V. Sokolov
    • Svetlana V. Evstafieva

    ORIGINAL ARTICLE 29 May 2021 Pages: 2331 - 2339

    

31. Creation of CNC system’s components for monitoring machine tool health

    • Liliya I. Martinova
    • Nikolay V. Kozak
    • Aleksandr B. Ljubimov

    ORIGINAL ARTICLE 24 April 2021 Pages: 2341 - 2348

    

32. Effect of metal foam on vibration damping and its modelling

    • Paolo Albertelli
    • Stefano Esposito
    • Michele Monno

    ORIGINAL ARTICLE Open access 18 May 2021 Pages: 2349 - 2358

    

33. Dynamic support stiffness of motorized spindle bearings under high-speed rotation

    • Shengli Tian
    • Xingxin Zhao
    • Shaojiang Dong

    ORIGINAL ARTICLE 21 May 2021 Pages: 2359 - 2367

    

34. Electrode wear pattern during EDM milling of Inconel 718

    • Mikhail Kliuev
    • Andrey Kutin
    • Konrad Wegener

    ORIGINAL ARTICLE 14 September 2021 Pages: 2369 - 2375

    

35. The effect of laser shock processing on mechanical properties of an advanced powder material depending on different ablative coatings and confinement medias

    • Yuqi Yang
    • Ying Lu
    • Xianliang Hu

    ORIGINAL ARTICLE 24 April 2021 Pages: 2377 - 2385

    

36. Low-temperature plasma technique for skin structure consolidation

    • Vladimir Vasilievich Martynov
    • Boris Maksovich Brzhozovskii
    • Elena Petrovna Zinina

    ORIGINAL ARTICLE 15 April 2021 Pages: 2387 - 2394

    

37. Effect of acoustic excitation on fiber-reinforced polypropylene and the influence on melt viscosity

    • Michael Heinrich
    • Ricardo Decker
    • Lothar Kroll

    ORIGINAL ARTICLE Open access 12 May 2021 Pages: 2395 - 2403

    

38. Substantiation of the technology for controlling the process of low-temperature plasma modification of metal product surface layer by the electrical signal parameters

    • Vladimir Vasilievich Martynov
    • Boris Maksovich Brzhozovskii
    • Aleksandr Vladimirovich Sussky

    ORIGINAL ARTICLE 09 June 2021 Pages: 2405 - 2419

    

39. WEDM single crater asymmetry

    • Paulo M. B. Esteves
    • Moritz Wiessner
    • Konrad Wegener

    ORIGINAL ARTICLE Open access 22 April 2021 Pages: 2421 - 2427

    

40. Method for residual strain modeling taking into account mold and distribution of heat transfer coefficients for thermoset composite material parts

    • Mikhail Kiauka
    • Mikhail Kasatkin
    • Alexey Borovkov

    ORIGINAL ARTICLE Open access 06 July 2021 Pages: 2429 - 2443

    

41. Geometry assessment of ultra-short pulsed laser drilled micro-holes

    • Matthias Putzer
    • Norbert Ackerl
    • Konrad Wegener

    ORIGINAL ARTICLE Open access 23 October 2020 Pages: 2445 - 2452

    

42. Correction to: geometry assessment of ultra-short pulsed laser drilled micro-holes

    • Matthias Putzer
    • Norbert Ackerl
    • Konrad Wegener

    Correction 19 January 2021 Pages: 2453 - 2455

43. Design optimization of aircraft structures using virtual proving ground

    • Yuriy Gorskii
    • Petr Gavrilov
    • Aleksandr Tamm

    ORIGINAL ARTICLE Open access 19 June 2021 Pages: 2457 - 2466

    

44. Development of algorithms for the formation and placement of N-dimensional orthogonal polyhedrons into containers of complex geometric shape

    • Vladislav A. Chekanin
    • Alexander V. Chekanin

    ORIGINAL ARTICLE 20 April 2021 Pages: 2467 - 2479

    

45. Friction stir welding of AA2024-T3: development of numerical simulation considering thermal history and heat generation

    • Cyrus Amini
    • Soran Hasanifard
    • J. Antonio Travieso-Rodriguez

    ORIGINAL ARTICLE 15 May 2021 Pages: 2481 - 2500

    

46. A VR-based approach in conducting MTM for manual workplaces

    • Valentina Gorobets
    • Valentin Holzwarth
    • Andreas Kunz

    ORIGINAL ARTICLE Open access 29 June 2021 Pages: 2501 - 2510

    

47. The research of the agglomeration process during the formation of an abrasive-polymer compound for waterjet cutting in a fluidized bed installation

    • Olga Kozhus
    • Gennady Barsukov

    ORIGINAL ARTICLE 28 April 2021 Pages: 2511 - 2518

    

48. An influence of slag refining on the structure and mechanical properties of the brass CuZn39Pb2

    • Mariusz Jenek
    • Paweł Schlafka

    ORIGINAL ARTICLE Open access 01 June 2021 Pages: 2519 - 2525

    

49. Special issue: ACMT - conference on Advanced and Competitive Manufacturing Technologies in Moscow

    Short Note 04 November 2021 Pages: 2527 - 2527