1. Heat transfer simulation and improvement of autoclave loading in composites manufacturing

   • Shokoufeh Mirzaei
   • Krishna Krishnan
   • Eric Palmer

   Application 11 January 2021 Pages: 2989 - 3000

   

2. An optimized algorithm and the verification methods for improving the volumetric error modeling accuracy of precision machine tools

   • Hui Liu
   • Si-ying Ling
   • Xiao-dong Wang

   ORIGINAL ARTICLE 03 January 2021 Pages: 3001 - 3015

   

3. Removal mechanism of 2.5-dimensional carbon fiber reinforced ceramic matrix composites processed by nanosecond laser

   • Haowen Jiao
   • Bing Chen
   • Shichun Li

   ORIGINAL ARTICLE 04 January 2021 Pages: 3017 - 3028

   

4. Correction to: Removal mechanism of 2.5-dimensional carbon fiber reinforced ceramic matrix composites processed by nanosecond laser

   • Haowen Jiao
   • Bing Chen
   • Shichun Li

   Correction 27 January 2021 Pages: 3029 - 3029

   

5. Effect of pulse current in manufacturing of cardiovascular stent using EDM die-sinking

   • Eko Pujiyulianto
   • Suyitno

   ORIGINAL ARTICLE 11 January 2021 Pages: 3031 - 3039

   

6. Effects of the granite-forming minerals on the surface roughness in the milling processes

   • Eszter Cserta
   • István Gábor Gyurika

   ORIGINAL ARTICLE Open access 11 January 2021 Pages: 3041 - 3052

   

7. The evaluation of profile errors of the leading and trailing edges of a thin-walled blade based on chord length deviation

   • Qian Feng
   • Xiaojun Lin
   • Junxue Ren

   ORIGINAL ARTICLE 11 January 2021 Pages: 3053 - 3067

   

8. A comparative investigation of damage models for fracture prediction in two-point incremental forming

   • Chenhao Wang
   • William J. T. Daniel
   • Paul A. Meehan

   ORIGINAL ARTICLE 11 January 2021 Pages: 3069 - 3081

   

9. Investigation on hole diameter non-uniformity of hole arrays by ultrasonic vibration-assisted EDM

   • Yuan Zhang
   • Baocheng Xie

   ORIGINAL ARTICLE 11 January 2021 Pages: 3083 - 3091

   

10. The impact of macro/microstructure features on the mechanical properties of refill friction stir spot–welded joints of AA2219 alloy with a large thickness ratio

    • Yangfan Zou
    • Wenya Li
    • Liyuan Liu

    ORIGINAL ARTICLE 12 January 2021 Pages: 3093 - 3103

    

11. Influences of thermal effects on residual stress fields of an aluminium-lithium alloy induced by shot peening

    • Xuefei Tao
    • Yukui Gao

    ORIGINAL ARTICLE 12 January 2021 Pages: 3105 - 3116

    

12. Feedrate scheduling of a five-axis hybrid robot for milling considering drive constraints

    • Guangxi Li
    • Haitao Liu
    • Juliang Xiao

    ORIGINAL ARTICLE 12 January 2021 Pages: 3117 - 3136

    

13. Study on the mechanisms of curved water jet fiber-guided laser technology

    • Yuxing Huang
    • Linfan Yang
    • Yuhong Long

    ORIGINAL ARTICLE 13 January 2021 Pages: 3137 - 3150

    

14. Springback prediction model and its compensation method for the variable curvature metal tube bending forming

    • Shuyou Zhang
    • Mengyu Fu
    • Huifang Zhou

    ORIGINAL ARTICLE 13 January 2021 Pages: 3151 - 3165

    

15. Formation mechanism of tearing defects in machining Nomex honeycomb core

    • Jiaming Jiang
    • Zhanqiang Liu

    ORIGINAL ARTICLE 13 January 2021 Pages: 3167 - 3176

    

16. Application of conduction heating on hot stamping of front bumper

    • Weikang Liang
    • Hailong Wang
    • Yisheng Zhang

    ORIGINAL ARTICLE 14 January 2021 Pages: 3177 - 3188

    

17. Control of machining distortion stability in machining of monolithic aircraft parts

    • Longxin Fan
    • Liang Li
    • Ning He

    ORIGINAL ARTICLE 14 January 2021 Pages: 3189 - 3199

    

18. A novel cutting tool selection approach based on a metal cutting process knowledge graph

    • Yang Duan
    • Li Hou
    • Song Leng

    ORIGINAL ARTICLE 14 January 2021 Pages: 3201 - 3214

    

19. Numerical and experimental study on the ultrasonic-assisted soft abrasive flow polishing characteristics

    • Jiang-qin Ge
    • Yi-le Ren
    • Wen-feng Xiang

    ORIGINAL ARTICLE 15 January 2021 Pages: 3215 - 3233

    

20. Analysis of eleven cross-roll straightening process of steel tube based on cubic spline function and continuous bending elastic-plastic theory

    • Lidong Ma
    • Zijian Liu
    • Yukang Du

    ORIGINAL ARTICLE 15 January 2021 Pages: 3235 - 3245

    

21. A high-frequency non-resonant elliptical vibration-assisted cutting device for diamond turning microstructured surfaces

    • Zhengjian Wang
    • Xichun Luo
    • Andrew Cox

    ORIGINAL ARTICLE Open access 15 January 2021 Pages: 3247 - 3261

    

22. Mathematical and physical modeling of FE-SEM surface quality surrounded by the plasma channel within Al powder-mixed electrical discharge machining of Ti-6Al-4V

    • Mohsen Asghari Ilani
    • Mohammad Khoshnevisan

    ORIGINAL ARTICLE 15 January 2021 Pages: 3263 - 3277

    

23. Energy assessment of different cooling technologies in Ti-6Al-4V milling

    • Paolo Albertelli
    • Michele Monno

    ORIGINAL ARTICLE Open access 15 January 2021 Pages: 3279 - 3306

    

24. Automated vision system for magnetic particle inspection of crankshafts using convolutional neural networks

    • Karim Tout
    • Anis Meguenani
    • Christophe Cudel

    ORIGINAL ARTICLE 15 January 2021 Pages: 3307 - 3326

    

25. An inverse procedure to estimate the heat flux at coated tool-chip interface: a 3D transient thermal model

    • Gabriela Costa Oliveira
    • Sidney Silveira Ribeiro
    • Gilmar Guimarães

    ORIGINAL ARTICLE 15 January 2021 Pages: 3327 - 3341

    

26. Comparison of the geometric accuracy of holes made in CFRP/Ti laminate by drilling and helical milling

    • Ben Wang
    • Hua Zhao
    • Yaohui Zheng

    ORIGINAL ARTICLE 15 January 2021 Pages: 3343 - 3350

    

27. Effects of process parameters on jet electrochemical machining of SiC particle-reinforced aluminum matrix composites

    • Sansan Ao
    • Xiangyang Qin
    • Zhen Luo

    ORIGINAL ARTICLE 16 January 2021 Pages: 3351 - 3361

    

28. Nonlinear mechanical model of the shaft of a roll forming mill and parameter identification

    • Matthias Lamprecht
    • Emin Koçbay
    • Friedrich Bleicher

    ORIGINAL ARTICLE Open access 17 January 2021 Pages: 3363 - 3375

    

29. Evaluation of the cooling efficiency of pulse spray for high-pressure die casting processes

    • Jianyue Zhang
    • Kyler Blowers
    • Qingyou Han

    ORIGINAL ARTICLE 17 January 2021 Pages: 3377 - 3388

    

30. A new approach to assess delamination in drilling carbon fibre-reinforced epoxy composite materials

    • Carla Moreira Machado
    • Duarte Silva
    • Jorge Pamies Teixeira

    ORIGINAL ARTICLE 17 January 2021 Pages: 3389 - 3398

    

31. Study on thrust force of ultrasonic-assisted vibration micro-hole drilling of titanium alloy

    • Guofu Gao
    • Zhaojie Yuan
    • Bo Zhao

    ORIGINAL ARTICLE 17 January 2021 Pages: 3399 - 3413

    

32. Studying the residual stress homogenization and relief in aerospace rolling ring of GH4169 alloy using ageing treatment

    • Nan Lv
    • Dong Liu
    • Jianguo Wang

    ORIGINAL ARTICLE 18 January 2021 Pages: 3415 - 3429

    

33. Wheel orientation calculation for helical rake flank sharpening of broaching tools

    • Kang Jia
    • Junkang Guo
    • Lei Zhang

    ORIGINAL ARTICLE 18 January 2021 Pages: 3431 - 3443

    

34. Cloud FEA of hot stamping processes using a software agnostic platform

    • Mingqing Zhu
    • Yixian C. Lim
    • Denis J. Politis

    ORIGINAL ARTICLE Open access 18 January 2021 Pages: 3445 - 3458

    

35. Cutting factors and testing of highly viscoelastic fluid abrasive flow machining

    • Zhiguo Dong
    • Yuchao Zhang
    • Hongbo Lei

    ORIGINAL ARTICLE 18 January 2021 Pages: 3459 - 3470

    

36. Characterization of the cutting forces and friction behavior in machining UD-CFRP using slot milling test

    • Jamal Sheikh-Ahmad
    • Fahad Almaskari
    • Mohamed El-Hofy

    ORIGINAL ARTICLE 19 January 2021 Pages: 3471 - 3483

    

37. Fully coupled thermo-mechanical finite element modeling of friction stir processing of super duplex stainless steel

    • Md. Eyasin Arafat
    • Fadi Al Badour
    • Neçar Merah

    ORIGINAL ARTICLE 19 January 2021 Pages: 3485 - 3500

    

38. Induced network-based transfer learning in injection molding for process modelling and optimization with artificial neural networks

    • Yannik Lockner
    • Christian Hopmann

    ORIGINAL ARTICLE Open access 19 January 2021 Pages: 3501 - 3513

    

39. Performance evaluation of the edge preparation of tungsten carbide inserts applied to hard turning

    • Carlos E. H. Ventura
    • Frederico C. Magalhães
    • Bernd Breidenstein

    ORIGINAL ARTICLE 19 January 2021 Pages: 3515 - 3527

    

40. Effect of angle deflection on deformation characteristic and mechanical property of electromagnetic riveted joint

    • Liming Duan
    • Xuerui Feng
    • Hao Jiang

    ORIGINAL ARTICLE 19 January 2021 Pages: 3529 - 3543

    

41. The use of TOPSIS-based-desirability function approach to optimize the balances among mechanical performances, energy consumption, and production efficiency of the arc welding process

    • Dawei Zhao
    • Yuriy Bezgans
    • Wenhao Du

    ORIGINAL ARTICLE 20 January 2021 Pages: 3545 - 3559