1. Sub-assembly recognition algorithm and performance analysis in assembly sequence planning

   • Xiaoxi Kou
   • Yan Cao
   • Hu Qiao

   ORIGINAL ARTICLE 05 August 2019 Pages: 971 - 981

   

2. Research on ship intelligent manufacturing data monitoring and quality control system based on industrial Internet of Things

   • Chao Xiang
   • Baoren Li

   ORIGINAL ARTICLE 06 August 2019 Pages: 983 - 992

   

3. IoT anomaly detection method in intelligent manufacturing industry based on trusted evaluation

   • Chao Wang

   ORIGINAL ARTICLE 16 August 2019 Pages: 993 - 1005

   

4. Quality of service optimization in wireless transmission of industrial Internet of Things for intelligent manufacturing

   • Xianming Huang

   ORIGINAL ARTICLE 17 August 2019 Pages: 1007 - 1016

   

5. Early fault diagnosis of rolling bearing based on noise-assisted signal feature enhancement and stochastic resonance for intelligent manufacturing

   • Heng Wang
   • Jinhai Chen
   • Guangxian Ni

   ORIGINAL ARTICLE 28 August 2019 Pages: 1017 - 1023

   

6. RETRACTED ARTICLE: Intelligent manufacturing model of construction industry based on Internet of Things technology

   • Lingji Kong
   • Biao Ma

   ORIGINAL ARTICLE 02 September 2019 Pages: 1025 - 1037

   

7. Research on key technologies of fault diagnosis and early warning for high-end equipment based on intelligent manufacturing and Internet of Things

   • Miao Wang
   • Zhenming Zhang
   • Shunuan Liu

   ORIGINAL ARTICLE 02 September 2019 Pages: 1039 - 1048

   

8. A method of garment factory workers’ performance monitoring using control chart based on RFID system

   • Cong Gu
   • Ruifang Zhou
   • Guifen Gao

   ORIGINAL ARTICLE 03 September 2019 Pages: 1049 - 1059

   

9. RETRACTED ARTICLE: Research on application of the Internet of things technology in financial leasing of intelligent manufacturing enterprises

   • Yanli Cao

   ORIGINAL ARTICLE 09 September 2019 Pages: 1061 - 1070

   

10. RETRACTED ARTICLE: Research on key technologies of service quality optimizationfor industrial IoT 5G network for intelligent manufacturing

    • Yeping Chu
    • Lin Pan
    • Anthony Lam

    ORIGINAL ARTICLE 14 September 2019 Pages: 1071 - 1080

    

11. Research on the overall architecture of Internet of Things middleware for intelligent industrial parks

    • Li Zhang
    • Huiqun Yuan
    • Anthony Lam

    ORIGINAL ARTICLE 14 September 2019 Pages: 1081 - 1089

    

12. An improved PSO algorithm for time-optimal trajectory planning of Delta robot in intelligent packaging

    • Cheng LIU
    • Guo-Hua CAO
    • Yan-Ming CHENG

    ORIGINAL ARTICLE 05 November 2019 Pages: 1091 - 1099

    

13. Research on digital production technology for traditional manufacturing enterprises based on industrial Internet of Things in 5G era

    • Yi Liu
    • KaiDi Tong
    • Jie Yang

    ORIGINAL ARTICLE 06 November 2019 Pages: 1101 - 1114

    

14. Analysis and improvement of material flow during extrusion process using spreading pocket die for large-size, flat-wide, and multi-ribs profile

    • Zhiwen Liu
    • Luoxing Li
    • Jie Yi

    ORIGINAL ARTICLE 28 January 2020 Pages: 1115 - 1129

    

15. A framework for analytical cost estimation of mechanical components based on manufacturing knowledge representation

    • Marco Mandolini
    • Federico Campi
    • Roberto Raffaeli

    ORIGINAL ARTICLE 21 February 2020 Pages: 1131 - 1151

    

16. Numerical and experimental study of the drilling of multi-stacks made of titanium alloy Ti-6Al-4V: interface and burr behavior

    • Nawel Glaa
    • Kamel Mehdi
    • Redouane Zitoune

    ORIGINAL ARTICLE 21 February 2020 Pages: 1153 - 1162

    

17. Review on direct metal laser deposition manufacturing technology for the Ti-6Al-4V alloy

    • P. N. Sibisi
    • A. P. I. Popoola
    • S. L. Pityana

    ORIGINAL ARTICLE 22 February 2020 Pages: 1163 - 1178

    

18. Investigation of micromilled tool steel H13 using tungsten carbide micro-end mills

    • C. S. Manso
    • S. Thom
    • E. G. del Conte

    ORIGINAL ARTICLE 22 February 2020 Pages: 1179 - 1189

    

19. Investigation to the torsion generation of spatial tubes in bending-twisting process

    • Zengkun Zhang
    • Jianjun Wu
    • Mingzhi Wang

    ORIGINAL ARTICLE 22 February 2020 Pages: 1191 - 1203

    

20. Constrained crystal growth during solidification of particles and splats in uniform droplet sprays

    • Yiannos Ioannou
    • Hiroki Fukuda
    • Charalabos C. Doumanidis

    ORIGINAL ARTICLE 22 February 2020 Pages: 1205 - 1221

    

21. Characterization of a direct metal printed injection mold with different conformal cooling channels

    • Chil-Chyuan Kuo
    • Zi-Fan Jiang
    • Jia-Qi Wu

    ORIGINAL ARTICLE 22 February 2020 Pages: 1223 - 1238

    

22. Galvanic Cr-Zn and spent foundry sand waste application as valuable components of sustainable ceramics to prevent environment pollution

    • Vsevolod Mymrin
    • Simone C. Borgo
    • Rodrigo E. Catai

    ORIGINAL ARTICLE 24 February 2020 Pages: 1239 - 1250

    

23. Equivalent heating tool method for numerical simulation for sheet temperature in frictional stir incremental forming

    • Lihua Li
    • Jin Wang

    ORIGINAL ARTICLE 24 February 2020 Pages: 1251 - 1263

    

24. Grinding process applied to workpieces with different geometries interrupted using CBN wheel

    • Rafael Lemes Rodriguez
    • José Claudio Lopes
    • Eduardo Carlos Bianchi

    ORIGINAL ARTICLE 25 February 2020 Pages: 1265 - 1275

    

25. Milling force and surface morphology of 45 steel under different Al₂O₃ nanofluid concentrations

    • Zhenjing Duan
    • Qingan Yin
    • Zhanqiang Liu

    ORIGINAL ARTICLE 25 February 2020 Pages: 1277 - 1296

    

26. Cutting of Al/Si bilayer systems: molecular dynamics study of twinning, phase transformation, and cracking

    • Vardan Hoviki Vardanyan
    • Zhibo Zhang
    • Herbert M. Urbassek

    ORIGINAL ARTICLE Open access 25 February 2020 Pages: 1297 - 1307

    

27. Mathematical modeling and experimental studies on axial drilling load for rotary ultrasonic drilling of C/SiC composites

    • Shafiul Islam
    • Songmei Yuan
    • Zhen Li

    ORIGINAL ARTICLE 26 February 2020 Pages: 1309 - 1326

    

28. Study on the law of wear of milling cutter for Waspaloy internal threads with a small diameter

    • Liangliang Dong
    • Jing Wang
    • Kun Li

    ORIGINAL ARTICLE 26 February 2020 Pages: 1327 - 1336

    

29. Prediction of subsurface damage depth in rotary ultrasonic machining of glass BK7 with probability statistics

    • Dongxi Lv
    • Mingda Chen
    • Yingdan Zhu

    ORIGINAL ARTICLE 27 February 2020 Pages: 1337 - 1344

    

30. Resource efficiency enhancement in sheet metal cutting industrial networks through cloud manufacturing

    • Alessandro Simeone
    • Bin Deng
    • Alessandra Caggiano

    ORIGINAL ARTICLE 27 February 2020 Pages: 1345 - 1365

    

31. Thermally induced comprehensive error modeling and compensation for gantry machine tools with grating scale in large structure machining

    • Huimin Li
    • Peng Zhang
    • Jianguo Yang

    ORIGINAL ARTICLE 27 February 2020 Pages: 1367 - 1376

    

32. Effects of gas-assisted perforated electrode with rotation on the machining efficiency of PMEDM of titanium

    • Yuan-Ta Yu
    • Shy-Feng Hsieh
    • Shih-Fu Ou

    ORIGINAL ARTICLE 27 February 2020 Pages: 1377 - 1386

    

33. Ball-burnishing factors affecting residual stress of AISI 8620 steel

    • Abdulaziz J. Alshareef
    • Ioan D. Marinescu
    • Mohammed Y. Tharwan

    ORIGINAL ARTICLE 28 February 2020 Pages: 1387 - 1397

    

34. Development of a form milling method for line gear: principle, CNC machine, cutter, and testing

    • Yangzhi Chen
    • Yansong Hu
    • Gaowei He

    ORIGINAL ARTICLE 28 February 2020 Pages: 1399 - 1409

    

35. Geometric deviations of laser powder bed–fused AlSi10Mg components: numerical predictions versus experimental measurements

    • Floriane Zongo
    • Charles Simoneau
    • Vladimir Brailovski

    ORIGINAL ARTICLE 28 February 2020 Pages: 1411 - 1436

    

36. Importance of bottom and flank edges in force models for flat-end milling operation

    • Ankit Agarwal
    • K. A. Desai

    ORIGINAL ARTICLE 28 February 2020 Pages: 1437 - 1449

    

37. Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718

    • Mathias Agmell
    • Volodymyr Bushlya
    • Jan-Eric Ståhl

    ORIGINAL ARTICLE Open access 29 February 2020 Pages: 1451 - 1462

    

38. Information-level real-time AR instruction: a novel dynamic assembly guidance information representation assisting human cognition

    • Zhuo Wang
    • Xiaoliang Bai
    • Dechuan Han

    ORIGINAL ARTICLE 02 March 2020 Pages: 1463 - 1481

    

39. Experimental and numerical investigation on multi-pass laser cutting of natural fibre composite

    • K. F. Tamrin
    • K. Moghadasi
    • N. A. Sheikh

    ORIGINAL ARTICLE 02 March 2020 Pages: 1483 - 1504

    

40. Milling chatter detection using scalogram and deep convolutional neural network

    • Minh-Quang Tran
    • Meng-Kun Liu
    • Quoc-Viet Tran

    ORIGINAL ARTICLE 02 March 2020 Pages: 1505 - 1516

    

41. Numerical investigation on roll forming of straight bevel gear

    • Dongcheng Li
    • Shaolin Zhang
    • Shudong Sun

    ORIGINAL ARTICLE 02 March 2020 Pages: 1517 - 1537

    

42. Investigation on the grinding properties of high thermal conductivity vitrified bond CBN grinding wheel for titanium alloy

    • Ying Shi
    • Liaoyuan Chen
    • Zhili Sun

    ORIGINAL ARTICLE 02 March 2020 Pages: 1539 - 1549

    

43. Flow field design and experimental investigation of electrochemical trepanning of diffuser with a special structure

    • Juewu Xu
    • Dong Zhu
    • Xingyan Hu

    ORIGINAL ARTICLE 02 March 2020 Pages: 1551 - 1558

    

44. Laser metal deposition of copper on diverse metals using green laser sources

    • Himani Siva Prasad
    • Frank Brueckner
    • Alexander F. H. Kaplan

    ORIGINAL ARTICLE Open access 03 March 2020 Pages: 1559 - 1568

    

45. Online measurement of the surface during laser forming

    • A. N. Thomsen
    • M. Kristiansen
    • B. Endelt

    ORIGINAL ARTICLE 03 March 2020 Pages: 1569 - 1579

    

46. Comparison of laser-MIG hybrid and autogenous laser welding of M250 maraging steel thick sections—understanding the role of filler wire addition

    • L. Subashini
    • K. V. Phani Prabhakar
    • G. Padmanabham

    ORIGINAL ARTICLE 03 March 2020 Pages: 1581 - 1594

    

47. Effect of hot rolling on structure and mechanical properties of Ti-6Al-4V alloy parts produced by direct laser deposition

    • P. Sokolov
    • A. Aleshchenko
    • A. Sova

    ORIGINAL ARTICLE 03 March 2020 Pages: 1595 - 1603

    

48. Less interference tool-path correction model for half revolution penetration and retraction trajectories in internal straight thread side milling

    • Yuanhao Fan
    • Zihua Hu
    • Xiaogao Chen

    ORIGINAL ARTICLE 04 March 2020 Pages: 1605 - 1624

    

49. Investigation of the droplet characteristics and size distribution during the collaborative atomization process of a twin-fluid nozzle

    • Bo Chen
    • Dianrong Gao
    • Peng Sun

    ORIGINAL ARTICLE 04 March 2020 Pages: 1625 - 1639

    

50. Use of computer simulation for modernization technology of aluminum alloys hot die forging

    • I. L. Konstantinov
    • S. B. Sidelnikov
    • M. V. Voroshilova

    ORIGINAL ARTICLE 05 March 2020 Pages: 1641 - 1647