Online first articles
Articles not assigned to an issue 1085 articles
-
-
Investigation of Microstructure, Mechanical, and Wear Behavior of Lanthanum Zirconate, Yttrium Zirconate, and Lanthanum Yttrium Zirconate
Authors (first, second and last of 4)
- M. J. Moaveni
- H. Omidvar
- S. M. H. Mirbagheri
- Content type: Original Research Article
- Published: 26 April 2024
-
Design of Non-Heat Treatable High Pressure Die Casting Al Alloys: A Review
Authors (first, second and last of 6)
- Hongyi Zhu
- Cunjuan Xia
- Haowei Wang
- Content type: Review
- Published: 26 April 2024
-
Hydraulic Bulging and Failure Analyses of Wire Arc Additive Manufactured Steel Tubes
Authors (first, second and last of 7)
- Bhupesh Singh Katiyar
- Dibya Ranjan Behera
- Sushanta Kumar Panda
- Content type: Original Research Article
- Published: 25 April 2024
-
Effect of Chemical Vapor Deposition Pressure on Preferred Orientation, Microstructure, and Oxidation Resistance of Pyrolytic Graphite
Authors (first, second and last of 5)
- E. Vetrivendan
- Rongali Hareesh
- S. Ningshen
- Content type: Original Research Article
- Published: 25 April 2024
-
Experimental Investigation of the Effect of Core Structures on Low-Velocity Impact Response of PEEK Sandwich Panels Manufactured by FDM
Authors (first, second and last of 4)
- Zhou Wen
- Ming Li
- Meigui Xue
- Content type: Original Research Article
- Published: 24 April 2024
-
Effect of Mg on the Corrosion Resistance of Hot-Dip Zn-Cu-Ti Alloy
Authors (first, second and last of 7)
- Yu Lei
- Shiwei Li
- Shaohua Yin
- Content type: Original Research Article
- Published: 24 April 2024
-
Development of a Novel β-Type Zr-25Ta-5Ti Alloy
Authors (first, second and last of 5)
- Edriely de Oliveira Saraiva
- Gerson Santos de Almeida
- Carlos Roberto Grandini
- Content type: Original Research Article
- Published: 24 April 2024
-
Experimental Investigation on Fabrication of Cermet Hollow Spheres for Use as Reinforcement in the Production of Lightweight and Strong Metal Foams for High Energy Absorption Applications
Authors (first, second and last of 4)
- Fisseha Zewdie
- Dhruv Narayan
- Naresh Bhatnagar
- Content type: Original Research Article
- Published: 24 April 2024
-
Critical Heat Transfer Coefficients for Selection of Quench Media during Heat Treatment of Steels
Authors
- Augustine Samuel
- K. M. Pranesh Rao
- K. Narayan Prabhu
- Content type: Original Research Article
- Published: 23 April 2024
-
Fabrication and Ballistic Performance Evaluation of B4C/AA7075 Functionally Graded Materials for Armor Applications
Authors (first, second and last of 4)
- Mayank Chouhan
- Lalit Thakur
- Sanjeev Kumar Verma
- Content type: Original Research Article
- Published: 23 April 2024
-
Effect of Laser Surface Polishing on the Surface Characteristics, Tribological, and Mechanical Behavior of 3D-Printed Acrylonitrile Styrene Acrylate Parts
Authors
- A. Captan Prabakaran
- P. Senthil
- T. Sathies
- Content type: Original Research Article
- Published: 22 April 2024
-
Simultaneous Enhancement of Thermal Conductivity and Mechanical Properties of EZ42 Magnesium Alloy by Ca Microalloying
Authors (first, second and last of 8)
- Yong Zhang
- Xiaogang Wang
- Tao Liu
- Content type: Original Research Article
- Published: 22 April 2024
-
In Situ Analysis of Stress and Microstructure Evolution during Welding of High-Alloy Steels Using Energy-Dispersive X-Ray Diffraction
Authors (first, second and last of 6)
- Nico Hempel
- Thomas Nitschke-Pagel
- Klaus Dilger
- Content type: Original Research Article
- Open Access
- Published: 22 April 2024
-
Sustainability of Existing Phase of Extruded Fiber-Reinforced Polylactic Acid under Dynamic Shock Loading Conditions
Authors
- G. Sakthi Balan
- S. Aravind Raj
- Content type: Original Research Article
- Published: 22 April 2024
-
Reconstruction of Numerical Models for Mechanical Performance of Artificially Rusted Steel Subjected to High Temperatures
Authors (first, second and last of 5)
- Zhen Guo
- Jingjing Zhou
- Fengjie Zhang
- Content type: Original Research Article
- Published: 22 April 2024
-
Influence of MoS2-Based Nanofluid Minimum Quantity Lubrication on Machining Performance of AISI 316L Stainless Steel
Authors
- Anandita Singh
- Aruna Thakur
- Soumya Gangopadhyay
- Content type: Original Research Article
- Published: 22 April 2024
-
Study of Design and Microstructure Properties of Laser Clad Multiphase Coupled Nickel-Based Self-Lubricating Coatings
Authors (first, second and last of 7)
- Dusheng Sun
- Yong Yang
- Mingyu Yuan
- Content type: Original Research Article
- Published: 22 April 2024
-
Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers
Authors (first, second and last of 4)
- H. S. Yuan
- H. Li
- M. Q. Li
- Content type: Original Research Article
- Published: 19 April 2024
-
Selected Articles from the 29th and 31st Heat Treating Society Conferences
Authors (first, second and last of 4)
- Robert Cryderman
- John Tartaglia
- Collin Russell
- Content type: Guest Editorial
- Published: 18 April 2024
-
Effects of V Element and Heat Treatment Process on Microstructure and Mechanical Properties of Additive Manufacturing of Titanium Aluminum Alloy Using Flux-Core Arc Welding Wire with TiH2 Powder
Authors (first, second and last of 6)
- Yuzhao Lv
- Ting Wang
- Zhichao Chen
- Content type: Original Research Article
- Published: 18 April 2024
-
Effect of Rare Earth Lanthanum Addition on Microstructure and Properties of Pure Titanium
Authors (first, second and last of 7)
- Yuanyuan Zhu
- Yechen Deng
- Bingfeng Wang
- Content type: Original Research Article
- Published: 18 April 2024
-
Effect of Surface Nano Structuring on Corrosion and Tribocorrosion Behavior of Ti6Al4V Alloy in Simulated Body Fluid
Authors (first, second and last of 4)
- Kumar Subham
- Ankur Kumar
- G. P. Chaudhari
- Content type: Original Research Article
- Published: 18 April 2024
-
Synergistic Effect of Sc and Excess Mg on the Microstructure and Mechanical Properties of Hypoeutectic Al-10Mg2Si Alloy
Authors (first, second and last of 4)
- Xiaofeng Wu
- Fufa Wu
- Rongda Zhao
- Content type: Original Research Article
- Published: 18 April 2024
-
Mechanical Properties of Recycled Carbon Fiber-Reinforced Resin Composites 3D Printed via Digital Light Processing
Authors
- Frederico de Castro Magalhães
- Juan Carlos Campos Rubio
- Content type: Original Research Article
- Published: 17 April 2024
-
Effects of Trace La on the Aging Properties of the Cu-Ti-Zr Alloys
Authors (first, second and last of 11)
- Nengneng Wang
- Meng Zhou
- Alex A. Volinsky
- Content type: Original Research Article
- Published: 17 April 2024
-
Influence of Heat Process on Microstructure and Mechanical Properties of DD5 Single Crystal Superalloy During Manufacturing
Authors (first, second and last of 4)
- Shujuan Ma
- Lei Cao
- Xin Zhuang
- Content type: Original Research Article
- Published: 16 April 2024
-
Surface Strengthening of Aerospace Material of Inconel 718 by GOV (Flow Peening) Process
Authors (first, second and last of 5)
- Mehmet Hanifi DoÄŸru
- Murat Kalak
- Kursad Gov
- Content type: Original Research Article
- Published: 16 April 2024
-
Oxidation Behavior of Ni-Based Oxide Dispersion-Strengthened Alloy Fabricated by Direct Energy Deposition at 1100 °C
Authors
- Changyu Ma
- Bruce S. Kang
- Content type: Original Research Article
- Published: 16 April 2024
-
Comparative Analysis of Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joints of AA7075/AA6061 via Friction Stir Welding, Tungsten Inert Gas Welding, and Tungsten Inert Gas + Friction Stir Processing
Authors (first, second and last of 4)
- Rajeev Rana
- D. B. Karunakar
- Thomas Mathew
- Content type: Original Research Article
- Published: 16 April 2024
-
The Role of Microstructure in the Gradient of Tensile Properties through Thickness in 7449 Aluminium Alloy Thick Plate
Authors (first, second and last of 4)
- J. A. Heredero
- J. Medina
- P. Adeva
- Content type: Original Research Article
- Open Access
- Published: 15 April 2024
-
Preparation of Bronze (CuSn10) Parts by Material Extrusion Process Using Paraffin-Based Binder
Authors (first, second and last of 6)
- Kai Jin
- Gemin Li
- Jigui Cheng
- Content type: Original Research Article
- Published: 15 April 2024
-
Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process
Authors (first, second and last of 4)
- G. Rajesh Kannan
- P. Sathiya
- M. Umar
- Content type: Original Research Article
- Published: 15 April 2024
-
Investigation of Electrochemical and Thermal Properties of Ti50Ni40−xZr10Nbx SMAs
Authors (first, second and last of 4)
- Shakhawan Salih Abdullah
- Esra Balci
- Fethi Dagdelen
- Content type: Original Research Article
- Published: 15 April 2024
-
Investigation of the Combined Effects of Stress Concentrations and Plasma Nitriding Parameters on the Fatigue Performance of AISI 4140 Low Alloy Steel
Authors
- F. Yılan
- H. Kovacı
- Content type: Original Research Article
- Published: 15 April 2024
-
Modeling Direct Quenching Effects on Microstructural Evolutions in AISI 4140 Steel: A Finite Volume Approach
Authors
- Amirhossein Meysami
- Goodarz Ahmadi
- Alex Meisami
- Content type: Original Research Article
- Published: 15 April 2024
-
Modeling the Effects of Tool Pin Configurations and Friction Stir Processing Parameters on Tungsten Inert Gas Welded Dissimilar Aluminum Alloy Joints
Authors
- Md Saquib Bin Reyaz
- Amar Nath Sinha
- Content type: Original Research Article
- Published: 15 April 2024
-
Microwave Absorption Properties of Flaky Carbonyl Iron @ Fe3O4 Produced by Plasma-Assisted Ball Milling
Authors (first, second and last of 5)
- Xian Liu
- Na Liu
- Zhongchen Lu
- Content type: Original Research Article
- Published: 15 April 2024
-
Microstructural Evolution and Mechanical Properties of AZ31 Magnesium Alloy Processed through Constrained Groove Pressing at Different Deformations and Temperatures
Authors
- Li Yu
- Content type: Original Research Article
- Published: 15 April 2024
-
Analysis of Microstructural Transformations Induced by Thermal Aging of Co-Cr-Ni-W-C Alloy Deposits and Their Impact on Corrosion Behavior in a 3.5% NaCl Medium
Authors
- Abdelaziz Sellidj
- Rym Mekideche
- Bachir Zaid
- Content type: Original Research Article
- Published: 15 April 2024
-
Microstructural Characteristics and Mechanical Properties of Friction Stir Welded 2219 Aluminum Alloy Plate After Spinning and Heat Treatment
Authors (first, second and last of 9)
- Z. L. Chang
- M. H. Huang
- L. H. Zhan
- Content type: Original Research Article
- Published: 12 April 2024
-
Austempering and Bainitic Transformation Kinetics of AISI 52100
Authors (first, second and last of 4)
- Haoxing You
- Mei Yang
- Richard D. Sisson Jr.
- Content type: Original Research Article
- Published: 12 April 2024
-
Research on Regulation Mechanism of TiO2 Photocathodic Protection Based on Cohesive Energy, Defect Patterns, and Nanofilm Size
Authors (first, second and last of 7)
- Wan Sun
- Guoqing Gou
- Wei Gao
- Content type: Original Research Article
- Published: 12 April 2024
-
The Oxidation Behavior of Spark Plasma Sintered Ti-48Al Alloys
Authors (first, second and last of 7)
- P. S. Sankara Rama Krishnan
- K. P. Davidson
- R. V. Ramanujan
- Content type: Original Research Article
- Published: 12 April 2024
-
Multi-objective Optimization in Selective Laser Melting of AlSi10Mg Alloy Based on Response Surface Methodology
Authors
- Junsong Liu
- Yan Shi
- Content type: Original Research Article
- Published: 12 April 2024
-
Correction: Microstructures and Mechanical Behaviors of Ni-Based Single-Crystal Superalloy DD90 Joints Brazed with a Co-Based Interlayer
Authors (first, second and last of 8)
- F. Gao
- J. D. Liu
- J. G. Li
- Content type: Correction
- Published: 11 April 2024
-
Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of P91 Heat-Resistant Steel Coating on Mild Steel
Authors (first, second and last of 6)
- Rui Wang
- Longlong Zhu
- Lei Hu
- Content type: Original Research Article
- Published: 10 April 2024
-
Regularization of Hole-Drilling Residual Stress Measurements with Eccentric Holes: An Approach with Influence Functions
Authors (first, second and last of 6)
- M. Beghini
- L. Bertini
- A. Benincasa
- Content type: Original Research Article
- Published: 10 April 2024
-
Enhanced Performance of AA7075/SiC/ZrC Hybrid Composite through Microwave Assisted Powder Metallurgy Techniques
Authors (first, second and last of 5)
- Guttikonda Manohar
- Adepu Kumar
- Abhijit Bhowmik
- Content type: Original Research Article
- Published: 10 April 2024
-
Residual Stress in Cold Spray SS304L Measured Via Neutron Diffraction and Comparison of Analytical Models to Predict the Residual Stress
Authors (first, second and last of 4)
- Christopher M. Roper
- Chris M. Fancher
- Luke N. Brewer
- Content type: Original Research Article
- Published: 10 April 2024
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more