Collection
Special Issue: Selected and Expanded Papers from the 2014 International Thermal Spray Conference
Special Issue published in January 2015, Vol. 24, No. 1-2 of Journal of Thermal Spray Technology
Editors
-
Armelle Vardelle
University of Limoges, France
-
Arvind Agarwal
Florida International University Miami, USA
-
Giovanni Bolelli
University of Modena and Reggio Emilia, Italy
-
Yuk-Chiu Lau
GE Power and Water (retired), USA
-
Rogerio S. Lima
National Research Council of Canada Boucherville, Canada
-
André McDonald
University of Alberta, Canada
-
Filofteia-Laura Toma
Fraunhofer Institute for Material and Beam Technology – IWS, Germany
-
Erja Turunen
VTT Technical Research Centre of Finland Espoo, Finland
Articles (32 in this collection)
-
-
Bulge Testing and Interface Fracture Characterization of Plasma-Sprayed and HIP Bonded Zr Coatings on U-Mo
Authors (first, second and last of 4)
-
-
-
Residual Stress Analysis of Laser-Drilled Thermal Barrier Coatings Involving Various Bond Coats
Authors (first, second and last of 6)
-
-
Mechanical Study of Novel VPS-Titanium Coating on Polyethylene Substrates
Authors (first, second and last of 7)
-
-
Effect of Al Enrichment by Pack Cementation of FeCr Coatings Deposited by HVOF
Authors (first, second and last of 5)
-
Interface Characterization and Bonding Mechanisms of Cold Gas-Sprayed Al Coatings on Ceramic Substrates
Authors (first, second and last of 7)
-
Studying the Effect of the Air-Cap Configuration in Twin-Wire Arc-Spraying Process on the Obtained Flow Characteristics Using Design of Experiment Oriented Fluid Simulation
Authors (first, second and last of 4)
-
-
Thermally Sprayed Y2O3-Al2O3-SiO2 Coatings for High-Temperature Protection of SiC Ceramics
Authors (first, second and last of 7)
-
-
Effect of Porosity Content of Arc-Sprayed Alloy 625 Skins on the Flexural Behavior of Nickel Foam Core Sandwich Structures
Authors (first, second and last of 4)
-
-
-
3D µCT and SEM Analysis of Resolidified Tips of Cored Wires Used in Twin-Wire Arc Spraying
Authors (first, second and last of 4)
-
Arc-Cathode Coupling in the Modeling of a Conventional DC Plasma Spray Torch
Authors (first, second and last of 4)
-
Influence of Substrate Temperature on Adhesion Strength of Cold-Sprayed Coatings
Authors (first, second and last of 5)
-
A Three-Dimensional Analysis of the Suspension Plasma Spray Impinging on a Flat Substrate
Authors (first, second and last of 4)
-
Elastic and Anelastic Behavior of TBCs Sprayed at High-Deposition Rates
Authors (first, second and last of 5)
-
-
Synthesis and Phase Stability of Scandia, Gadolinia, and Ytterbia Co-doped Zirconia for Thermal Barrier Coating Application
Authors (first, second and last of 6)
-
Mechanical Properties of Cu-0.1Ag Alloys Deposited by Cold Spray with Various Powder Feed Rate and Heat Treatment
Authors (first, second and last of 4)
-
Numerical Simulation of Minimal Average Bonding Strength to Suppress Rebounding in Cold Spraying Cu/Cu: A Preliminary Study
Authors (first, second and last of 5)
-
-
Thermal Spray Coatings for High-Temperature Corrosion Protection in Biomass Co-Fired Boilers
Authors
-
A New Type of Self-lubricated Thermal Spray Coatings: Liquid Lubricants Embedded in a Metal Matrix
Authors
-
Plasma Spraying of Ceramics with Particular Difficulties in Processing
Authors (first, second and last of 7)
-
Columnar-Structured Mg-Al-Spinel Thermal Barrier Coatings (TBCs) by Suspension Plasma Spraying (SPS)
Authors (first, second and last of 4)
-
WC-Co Composite Coating Deposited by Cold Spraying of a Core-Shell-Structured WC-Co Powder
Authors (first, second and last of 6)
