Volume 55, Issue 1

Search all Journal of the Australian Ceramic Society articles

March 2019

31 articles in this issue

Synthesis, characterization, and electrocatalytic properties of La_0.9Sr_0.1Cr_1−xCo_xO₃ perovskite oxides
Sofiane Makhloufi
Elies Omari
Mahmoud Omari
Research 29 May 2018 Pages: 1 - 10
In vitro surface reaction in SBF of a non-crystalline aluminosilicate (geopolymer) material
C. Tippayasam
S. Sutikulsombat
D. Chaysuwan
Research 15 June 2018 Pages: 11 - 17
Design and construction of a multifunction piezoelectric transformer
Adil Eddiai
Mounir Meddad
Christian Courtois
Research 27 May 2018 Pages: 19 - 24
Synthesis, morphology, structural, and rheological studies of Fe_0.01Al_0.5La._0.01Zn_0.98O-based polyaniline composite materials
M. Sohail
M. Saleem Khan
Sami Ur Rahman
Research 12 June 2018 Pages: 25 - 36
The effect of cement raw mix waste dust on porcelain tile properties
Tuna Aydin
Cigdem Paksoy
Research 14 June 2018 Pages: 37 - 45
Comparison of shear bond strengths between a mica-based glass-ceramic and human dentin using three different resin cements
Thapanee Srichumpong
Kallaya Suputtamongkol
Duangrudee Chaysuwan
Research 10 June 2018 Pages: 47 - 55
Precipitation–deposition synthesis, characterization, and visible light-driven photocatalytic properties of heterostructure AgI/Bi₂WO₆ nanocomposites
Anukorn Phuruangrat
Sittikorn Jonjana
Titipun Thongtem
Research 16 June 2018 Pages: 57 - 63
Theoretical description of zirconia ceramics aging kinetics
Andrey O. Zhigachev
Alexey V. Umrikhin
Vyacheslav V. Rodaev
Research 06 June 2018 Pages: 65 - 70
Rapid preparation of α, β-Bi₂O₃ and α/β-Bi₂O₃ heterojunction with enhanced photocatalytic properties
Xiaoni Du
Yang Liu
Chaofei Ren
Research 15 June 2018 Pages: 71 - 76
Characterization of europium oxychloride nanopowders codoped with Cu/Ni ions synthesized by solvothermal route: significant effect of post-annealing in hydrogen
A. A. Dakhel
Research 14 June 2018 Pages: 77 - 84
Mechanical behavior of plasma-sprayed pure and reinforced hydroxyapatite coatings on Ti6Al4V alloy
Gurbhinder Singh
Research 16 June 2018 Pages: 85 - 96
Interfacial reaction between YSZ electrolyte and La_0.7Sr_0.3VO₃ perovskite anode for application
Chi-Yang Liu
Shu-Yi Tsai
Kuan-Zong Fung
Research 12 July 2018 Pages: 97 - 102
Synthesis and application of high-permeable zeolite MER membrane for separation of carbon dioxide from methane
Seyed Mojtaba Mirfendereski
Research 20 June 2018 Pages: 103 - 114
Effect of sintering temperatures on structural and optical properties of ZnO-Zn₂SiO₄ composite prepared by using amorphous SiO₂ nanoparticles
Engku Abd Ghapur Engku Ali
Khamirul Amin Matori
Ibrahim Mustapha Alibe
Research 22 June 2018 Pages: 115 - 122
Microstructure tailoring of combustion-derived Ni-GDC and Ni-SDC composites as anode materials for intermediate temperature solid oxide fuel cells
Tina Skalar
Klementina Zupan
Marjan Marinšek
Research 16 June 2018 Pages: 123 - 133
Influence of heating rate and mechanical activation on the reaction between kaolin and aluminium powder
Hocine Belhouchet
Toufik Sahraoui
Maximina Romero
Research 15 June 2018 Pages: 135 - 144
Preparation and in vitro investigation on bioactivity of magnesia-contained bioactive glasses
Sampath Kumar Arepalli
Himanshu Tripathi
S. P. Singh
Research 22 June 2018 Pages: 145 - 155
Microwave absorption of Mn_0.5Zn_0.5Fe₂O₄ nanoparticles integrated in multi-walled carbon nanotubes
M. Dalal
A. Mallick
P. K. Chakrabarti
Research 22 June 2018 Pages: 157 - 167
Green gelcasting of aluminum nitride using environmental sustainable ovalbumin natural binder
W. H. Kok
Winco K. C. Yung
Desmond T. C. Ang
Research 04 July 2018 Pages: 169 - 177
Enhanced luminescence by tunable coupling of Eu³⁺ and Tb³⁺ in ZnAl₂O₄:Eu³⁺:Tb³⁺ phosphor synthesized by solution combustion method
Naveen Verma
Bernabe Marí
Anuj Mittal
Research 14 June 2018 Pages: 179 - 185
In vitro bioactivity and corrosion resistance enhancement of Ti-6Al-4V by highly ordered TiO₂ nanotube arrays
M. Sarraf
N. L. Sukiman
W. J. Basirun
Research 26 July 2018 Pages: 187 - 200
Structural, morphological, electrical, impedance and ferroelectric properties of BaO-ZnO-TiO₂ ternary system
K. Chandra Babu Naidu
V. Narasimha Reddy
N. Suresh Kumar
Research 18 June 2018 Pages: 201 - 218
Microwave-assisted processing of cobalt aluminate blue nano-ceramic pigment using sol–gel method
Masoud Rajabi
Pegah Kharaziyan
Mehdi Montazeri-Pour
Research 15 June 2018 Pages: 219 - 227
Effect of Joncryl61 and gelatin in the formation of hydroxyapatite nanocomposite
B. Shalini
A. Ruban Kumar
Research 21 July 2018 Pages: 229 - 234
Characterization of hybrid light-cured resin composites reinforced by microspherical silanized DCPA/nanorod HA via thermal fatigue
Yu-Ren Wu
Chin-Wei Chang
Wen-Cheng Chen
Research 28 June 2018 Pages: 235 - 245
Bioactive glass/hydroxyapatite- containing electrospun poly (ε-Caprolactone) composite nanofibers for bone tissue engineering
Aylin M. Deliormanlı
Rabia Konyalı
Research 06 July 2018 Pages: 247 - 256
Effect of alkaline earth dopant on density, mechanical, and electrical properties of Cu_0.97AE_0.03CrO₂ (AE = Mg, Ca, Sr, and Ba) delafossite oxide
M. A. Madre
M. A. Torres
A. Sotelo
Research 28 June 2018 Pages: 257 - 263
Concentration dependence of the Cr³⁺ ESR linewidth in barium titanate
R. S. de Biasi
M. L. N. Grillo
Research 29 June 2018 Pages: 265 - 268
Biocompatibility of a PLA-based composite containing hydroxyapatite derived from waste bones of dolphin Neophocaena asiaeorientalis
Mi Rim Lee
Gyung Won Lee
Dae Youn Hwang
Research 19 September 2018 Pages: 269 - 279
The effects of aluminum and aluminum borate addition on the properties of MgO-C refractories
M. Heidari Bagherabadi
R. Naghizadeh
M. Fallah Vostakola
Research 21 July 2018 Pages: 281 - 288
Evaluation of K₂La₂Ti₃O₁₀-based coatings for Daphnia magna acute toxicity test of methylene blue degradation in water
G. Kurşun
A. Pala
E. Çelik
Research 25 July 2018 Pages: 289 - 296

Volume 55, Issue 1

Synthesis, characterization, and electrocatalytic properties of La_0.9Sr_0.1Cr_1−xCo_xO₃ perovskite oxides

In vitro surface reaction in SBF of a non-crystalline aluminosilicate (geopolymer) material

Design and construction of a multifunction piezoelectric transformer

Synthesis, morphology, structural, and rheological studies of Fe_0.01Al_0.5La._0.01Zn_0.98O-based polyaniline composite materials

The effect of cement raw mix waste dust on porcelain tile properties

Comparison of shear bond strengths between a mica-based glass-ceramic and human dentin using three different resin cements

Precipitation–deposition synthesis, characterization, and visible light-driven photocatalytic properties of heterostructure AgI/Bi₂WO₆ nanocomposites

Theoretical description of zirconia ceramics aging kinetics

Rapid preparation of α, β-Bi₂O₃ and α/β-Bi₂O₃ heterojunction with enhanced photocatalytic properties

Characterization of europium oxychloride nanopowders codoped with Cu/Ni ions synthesized by solvothermal route: significant effect of post-annealing in hydrogen

Mechanical behavior of plasma-sprayed pure and reinforced hydroxyapatite coatings on Ti6Al4V alloy

Interfacial reaction between YSZ electrolyte and La_0.7Sr_0.3VO₃ perovskite anode for application

Synthesis and application of high-permeable zeolite MER membrane for separation of carbon dioxide from methane

Effect of sintering temperatures on structural and optical properties of ZnO-Zn₂SiO₄ composite prepared by using amorphous SiO₂ nanoparticles

Microstructure tailoring of combustion-derived Ni-GDC and Ni-SDC composites as anode materials for intermediate temperature solid oxide fuel cells

Influence of heating rate and mechanical activation on the reaction between kaolin and aluminium powder

Preparation and in vitro investigation on bioactivity of magnesia-contained bioactive glasses

Microwave absorption of Mn_0.5Zn_0.5Fe₂O₄ nanoparticles integrated in multi-walled carbon nanotubes

Green gelcasting of aluminum nitride using environmental sustainable ovalbumin natural binder

Enhanced luminescence by tunable coupling of Eu³⁺ and Tb³⁺ in ZnAl₂O₄:Eu³⁺:Tb³⁺ phosphor synthesized by solution combustion method

In vitro bioactivity and corrosion resistance enhancement of Ti-6Al-4V by highly ordered TiO₂ nanotube arrays

Structural, morphological, electrical, impedance and ferroelectric properties of BaO-ZnO-TiO₂ ternary system

Microwave-assisted processing of cobalt aluminate blue nano-ceramic pigment using sol–gel method

Effect of Joncryl61 and gelatin in the formation of hydroxyapatite nanocomposite

Characterization of hybrid light-cured resin composites reinforced by microspherical silanized DCPA/nanorod HA via thermal fatigue

Bioactive glass/hydroxyapatite- containing electrospun poly (ε-Caprolactone) composite nanofibers for bone tissue engineering

Effect of alkaline earth dopant on density, mechanical, and electrical properties of Cu_0.97AE_0.03CrO₂ (AE = Mg, Ca, Sr, and Ba) delafossite oxide

Concentration dependence of the Cr³⁺ ESR linewidth in barium titanate

Biocompatibility of a PLA-based composite containing hydroxyapatite derived from waste bones of dolphin Neophocaena asiaeorientalis

The effects of aluminum and aluminum borate addition on the properties of MgO-C refractories

Evaluation of K₂La₂Ti₃O₁₀-based coatings for Daphnia magna acute toxicity test of methylene blue degradation in water

Navigation