1. Editorial

   Editorial 23 December 2011 Pages: 1 - 2

2. News from the Academy

   • John Barnett

   IAWS News 20 December 2011 Pages: 3 - 4

3. The fracture toughness and properties of thermally modified beech and ash at different moisture contents

   • Almudena Majano-Majano
   • Mark Hughes
   • Jose L. Fernandez-Cabo

   Original 21 November 2010 Pages: 5 - 21

   

4. Basic properties of woodceramics made from bamboo powder and epoxy resin

   • Xian-Chun Yu
   • De-Lin Sun
   • Xiang-Su Li

   Original 20 November 2010 Pages: 23 - 31

   

5. Coloring characteristics of in situ lignin during heat treatment

   • Chen Yao
   • Fan Yongming
   • Li Houkun

   Original 18 November 2010 Pages: 33 - 40

   

6. Nondestructive evaluation of heat-treated Eucalyptus grandis Hill ex Maiden wood using stress wave method

   • Rosilei A. Garcia
   • Alexandre Monteiro de Carvalho
   • Rafael Fonseca de Medeiros Silva

   Original 21 October 2010 Pages: 41 - 52

   

7. Properties of oriented strand board made from Betung bamboo (Dendrocalamus asper (Schultes.f) Backer ex Heyne)

   • Fauzi Febrianto
   • Sahroni
   • Nam-Hun Kim

   Original 09 November 2010 Pages: 53 - 62

8. Fungal colonisation of outside weathered modified wood

   • Antje Pfeffer
   • Patrik J. Hoegger
   • Holger Militz

   Original Open access 13 October 2010 Pages: 63 - 72

   

9. Compression of wood under saturated steam, superheated steam, and transient conditions at 150°C, 160°C, and 170°C

   • Andreja Kutnar
   • Frederick A. Kamke

   Original 08 October 2010 Pages: 73 - 88

   

10. Steaming effects on selected wood properties of Turkey oak by spectral analysis

    • Luigi Todaro
    • Luigi Zuccaro
    • Antonio Scopa

    Original 05 October 2010 Pages: 89 - 100

    

11. Novel assessment of casehardening in kiln-dried lumber

    • Prawate Diawanich
    • Suchat Tomad
    • Buhnnum Kyokong

    Original 05 October 2010 Pages: 101 - 114

    

12. Toward a process monitoring of CNC wood router. Sensor selection and surface roughness prediction

    • Piotr Iskra
    • Roger E. Hernández

    Original 07 October 2010 Pages: 115 - 128

    

13. Roughness models for sanded wood surfaces

    • P. L. Tan
    • Safian Sharif
    • Izman Sudin

    Original 06 October 2010 Pages: 129 - 142

    

14. Eucalyptus camaldulensis density and fiber length estimated by near-infrared spectroscopy

    • Tetsuya Inagaki
    • Manfred Schwanninger
    • Satoru Tsuchikawa

    Original 02 October 2010 Pages: 143 - 155

    

15. A common near infrared—based partial least squares regression model for the prediction of wood density of Pinus pinaster and Larix × eurolepis

    • Ana Alves
    • Antonio Santos
    • José Rodrigues

    Original 05 October 2010 Pages: 157 - 175

    

16. Colour alteration and chemistry changes in oak wood (Quercus pedunculata Ehrh) during plain vacuum drying

    • Sadoth Sandoval-Torres
    • Wahbi Jomaa
    • Jean-Rodolphe Puiggali

    Original 01 October 2010 Pages: 177 - 191

    

17. Nanofibers from bagasse and rice straw: process optimization and properties

    • Mohammad L. Hassan
    • Aji P. Mathew
    • Kristiina Oksman

    Original 17 September 2010 Pages: 193 - 205

    

18. Liquid water absorption in dried Norway spruce timber measured with CT scanning and viewed as a percolation process

    • Karin Sandberg
    • Jarl-Gunnar Salin

    Original 14 September 2010 Pages: 207 - 219

    

19. Removal of cadmium (II) from aqueous solutions by adsorption using meranti wood

    • Mohd Rafatullah
    • Othman Sulaiman
    • Anees Ahmad

    Original 08 October 2010 Pages: 221 - 241

    

20. Adhesive penetration in beech wood: experiments

    • Philipp Hass
    • Falk K. Wittel
    • Peter Niemz

    Original 06 March 2011 Pages: 243 - 256

    

21. Investigation on the compatibilizing effect of m-isopropenyl-α,α-dimethylbenzyl isocyanate grafted polypropylene on polypropylene and wood flour composites

    • Chuigen Guo
    • Liping Li
    • Qingwen Wang

    Original 10 March 2011 Pages: 257 - 270

    

22. Production of hemicellulosic sugars from Pinus pinaster wood by sequential steps of aqueous extraction and acid hydrolysis

    • M. J. González-Muñoz
    • Rosana Alvarez
    • J. C. Parajó

    Original 24 February 2011 Pages: 271 - 285

    

23. Within-tree variations in the surface free energy of wood assessed by contact angle analysis

    • Davide Rossi
    • Sergio Rossi
    • Antonio Bettero

    Original 23 February 2011 Pages: 287 - 298

    

24. Chemical modification of simul wood with styrene–acrylonitrile copolymer and organically modified nanoclay

    • R. R. Devi
    • T. K. Maji

    Original 22 February 2011 Pages: 299 - 315

    

25. Studies on the nanostructure of the cell wall of bamboo using X-ray scattering

    • Yurong Wang
    • Kirsi Leppänen
    • Benhua Fei

    Original 12 February 2011 Pages: 317 - 332

    

26. Capacity prediction of welded timber joints

    • Till Vallée
    • Thomas Tannert
    • Christelle Ganne-Chedville

    Original 16 February 2011 Pages: 333 - 347

    

27. Control by ATR-FTIR of surface treatment of cork stoppers and its effect on their mechanical performance

    • Jose R. Gonzalez-Adrados
    • Maria C. Garcia-Vallejo
    • Rosa Calvo-Haro

    Original 29 January 2011 Pages: 349 - 360

    

28. Duration-of-load and creep effects in strand-based wood composite: experimental research

    • Jasmine B. Wang
    • Frank Lam
    • Ricardo O. Foschi

    Original 23 January 2011 Pages: 361 - 373

    

29. Duration-of-load and creep effects in strand-based wood composite: a creep-rupture model

    • Jasmine B. Wang
    • Ricardo O. Foschi
    • Frank Lam

    Original 23 January 2011 Pages: 375 - 391

    

30. Bamboo nanofiber preparation by HCW and grinding treatment and its application for nanocomposite

    • Fuxiang Chang
    • Seung-Hwan Lee
    • Takashi Endo

    Original 06 April 2011 Pages: 393 - 403

    

31. Moisture diffusion coefficient of reaction woods: compression wood of Picea abies L. and tension wood of Fagus sylvatica L.

    • Asghar Tarmian
    • Romain Remond
    • Patrick Perré

    Original 22 March 2011 Pages: 405 - 417

    

32. Effect of wood species on thermal flow behavior and physical properties of thermoplastic moldings

    • Isoko Takahashi
    • Takanori Sugimoto
    • Youji Kikata

    Original 17 March 2011 Pages: 419 - 429

    

33. Effect of conditioning on distribution and availability of alkaline copper quat (ACQ) preservative components in earlywood and latewood of southern pine

    • G. Zhou
    • Z. Huang
    • P. A. Cooper

    Original 18 March 2011 Pages: 431 - 441

    

34. Extraction of antioxidants from eucalyptus (Eucalyptus globulus) bark

    • Gonzalo Vázquez
    • Jorge Santos
    • Julia González-Álvarez

    Original 08 April 2011 Pages: 443 - 457

    

35. Origin of the acetylated structures present in white birch (Betula pendula Roth) milled wood lignin

    • Jorge Rencoret
    • José C. del Río
    • Knut Lundquist

    Original 02 April 2011 Pages: 459 - 471

    

36. Two-level system dynamical coarse-graining of annual rings

    • Anteneh Tesfaye Tekleyohannes
    • Stavros Avramidis

    Original 02 April 2011 Pages: 473 - 485

    

37. Physical properties and termite durability of maritime pine Pinus pinaster Ait., heat-treated under vacuum pressure

    • Thibaud Surini
    • Fatima Charrier
    • Stéphane Grelier

    Original 23 April 2011 Pages: 487 - 501

    

38. Probabilistic strength prediction of adhesively bonded timber joints

    • Thomas Tannert
    • Till Vallée
    • Simon Hehl

    Original 08 May 2011 Pages: 503 - 513

    

39. Study on biopretreatment of lignin by white-rot fungi for enhancing pyrolysis in inert atmosphere

    • Xuewei Yang
    • Xiaoyu Zhang
    • Shulin Chen

    Original 15 May 2011 Pages: 515 - 527

    

40. Adhesive penetration of hardwood: a generic penetration model

    • Miller Mendoza
    • Philipp Hass
    • Hans J. Herrmann

    Original 15 May 2011 Pages: 529 - 549

    

41. Acoustic tomography in relation to 2D ultrasonic velocity and hardness mappings

    • Li Li
    • Xiping Wang
    • R. Bruce Allison

    Original 17 May 2011 Pages: 551 - 561

    

42. Influence of combined hydro-thermal treatments on selected properties of Turkey oak (Quercus cerris L.) wood

    • Luigi Todaro
    • Roberto Zanuttini
    • Nicola Moretti

    Original 04 June 2011 Pages: 563 - 578

    

43. Experimental and numerical investigations on adhesively bonded timber joints

    • Thomas Tannert
    • Till Vallée
    • Simon Hehl

    Original 17 May 2011 Pages: 579 - 590