1. Research and prospect of welding monitoring technology based on machine vision

   • Xi’an Fan
   • Xiangdong Gao
   • Yanxi Zhang

   Critical Review 11 June 2021 Pages: 3365 - 3391

   

2. A mini review on manufacturing defects and performance assessments of complex shape prepreg-based composites

   • Muhammad Hafiz Hassan

   Critical Review 12 June 2021 Pages: 3393 - 3408

   

3. Designing acceptance sampling plans based on the lifetime performance index under gamma distribution

   • Amy H. I. Lee
   • Chien-Wei Wu
   • Cheng-Hsuan Liu

   ORIGINAL ARTICLE 07 June 2021 Pages: 3409 - 3422

   

4. Finite element analysis of temperature uniformity in transverse induction heating process in ESP rolling

   • Wen Peng
   • Xiaorui Chen
   • Dianhua Zhang

   ORIGINAL ARTICLE 07 June 2021 Pages: 3423 - 3439

   

5. Manufacturing and properties of composite material from demolition debris, plaster waste, and lime production waste to decrease ecological problems of cities

   • Vsevolod Mymrin
   • Carlos E. Waltrick
   • Vitor Baldin

   ORIGINAL ARTICLE 08 June 2021 Pages: 3441 - 3451

   

6. Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters

   • Lian-yun Jiang
   • Tao Zhen
   • Li-feng Ma

   ORIGINAL ARTICLE 08 June 2021 Pages: 3453 - 3465

   

7. Rake angle effects on ultrasonic-assisted edge trimming of multidirectional CFRP laminates

   • Mohamed O. Helmy
   • Hassan El-Hofy
   • M. H. El-Hofy

   ORIGINAL ARTICLE 08 June 2021 Pages: 3467 - 3484

   

8. Effect of ultrasonic vibration-assisted two-stage age forming on properties of 7075 aluminum alloy

   • Dahai Liu
   • Jingdong Chen
   • Zengxin Huang

   ORIGINAL ARTICLE 08 June 2021 Pages: 3485 - 3492

   

9. A deep learning-based approach for machining process route generation

   • Yajun Zhang
   • Shusheng Zhang
   • Jiachen Liang

   ORIGINAL ARTICLE 08 June 2021 Pages: 3493 - 3511

   

10. Cognitive capabilities for the CAAI in cyber-physical production systems

    • Jan Strohschein
    • Andreas Fischbach
    • Thomas Bartz-Beielstein

    ORIGINAL ARTICLE Open access 08 June 2021 Pages: 3513 - 3532

    

11. Task-level decision-making for dynamic and stochastic human-robot collaboration based on dual agents deep reinforcement learning

    • Zhihao Liu
    • Quan Liu
    • Zude Zhou

    ORIGINAL ARTICLE 08 June 2021 Pages: 3533 - 3552

    

12. Anisotropic fracture forming limit curve and its applications for sheet metal forming with complex strain paths of aluminum sheet

    • Taratip Chaimongkon
    • Sansot Panich
    • Vitoon Uthaisangsuk

    ORIGINAL ARTICLE 08 June 2021 Pages: 3553 - 3577

    

13. Study on the formation and prevention mechanism of internal voids in cross wedge rolling

    • Zhi Jia
    • Baolin Wei
    • Xuan Sun

    ORIGINAL ARTICLE 08 June 2021 Pages: 3579 - 3587

    

14. The effect of porosity on the mechanical properties of Ti-6Al-4V components manufactured by high-power selective laser melting

    • Ntombizodwa R. Mathe
    • Lerato C. Tshabalala
    • Anton du Plessis

    ORIGINAL ARTICLE 08 June 2021 Pages: 3589 - 3597

    

15. A study of modeling assumptions and adaptive remeshing for thermomechanical finite element modeling of the LPBF process

    • Alaa Olleak
    • Zhimin Xi

    ORIGINAL ARTICLE 08 June 2021 Pages: 3599 - 3615

    

16. Ultrasonic vibration-induced severe plastic deformation of Cu foils: effects of elastic-plastic stress wave bounce, acoustic softening, and size effect

    • Zhihao Chen
    • Chao Liu
    • Wei Cao

    ORIGINAL ARTICLE 08 June 2021 Pages: 3617 - 3629

    

17. Effect of tool rake angle on the material removal mechanism transition of single-crystal silicon: a molecular dynamics study

    • Changlin Liu
    • Jianning Chu
    • Jianfeng Xu

    ORIGINAL ARTICLE 08 June 2021 Pages: 3631 - 3644

    

18. Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

    • Zhengchun Du
    • Guangyan Ge
    • Jianguo Yang

    ORIGINAL ARTICLE 09 June 2021 Pages: 3645 - 3656

    

19. A simple method for dimensional measurement of ring-shaped objects using image processing technique

    • Anh-Tuan Dang
    • Quang-Cherng Hsu
    • Tat-Tai Truong

    ORIGINAL ARTICLE 09 June 2021 Pages: 3657 - 3678

    

20. Double-sided self-pierce riveting of dissimilar materials

    • Luis M. Alves
    • Rafael M. Afonso
    • Paulo A. F. Martins

    ORIGINAL ARTICLE 09 June 2021 Pages: 3679 - 3687

    

21. Assembly sequence planning based on adaptive gravitational search algorithm

    • Bo Gao
    • Shichao Zhang
    • Chengwu Ma

    ORIGINAL ARTICLE 09 June 2021 Pages: 3689 - 3700

    

22. Comparative study on cutting performance of conventional and ultrasonic-assisted bi-directional helical milling of CFRP

    • Chen Tao
    • Lu Yujiang
    • Liu Guangjun

    ORIGINAL ARTICLE 09 June 2021 Pages: 3701 - 3711

    

23. Comparative analysis of the machining temperatures of an end mill and a novel tool in the orbital drilling of CFRP composites

    • Linghao Kong
    • Dong Gao
    • Yong Lu

    ORIGINAL ARTICLE 09 June 2021 Pages: 3713 - 3729

    

24. Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools

    • Jingjie Zhang
    • Zhanqiang Liu
    • Xiangfei Meng

    ORIGINAL ARTICLE 09 June 2021 Pages: 3731 - 3739

    

25. Sustainable reconfigurable manufacturing system design using adapted multi-objective evolutionary-based approaches

    • Imen Khettabi
    • Lyes Benyoucef
    • Mohamed Amine Boutiche

    ORIGINAL ARTICLE 09 June 2021 Pages: 3741 - 3759

    

26. Effects of constricted arc on the shaping of additively manufactured parts by cold metal transfer arc

    • Jiadong Guo
    • Zhijiang Wang

    ORIGINAL ARTICLE 09 June 2021 Pages: 3761 - 3771

    

27. Geometric characteristics of AlSi10Mg ultrathin walls fabricated by selective laser melting with energy density and related process parameters

    • Xin Lu
    • Mengnie Victor Li
    • Hongbin Yang

    ORIGINAL ARTICLE 09 June 2021 Pages: 3773 - 3790

    

28. Further expansion from Smart Manufacturing System (SMS) to Smart Manufacturing Implementation System (SMIS): industrial application scenarios and evaluation

    • Xianyu Zhang
    • Xinguo Ming

    ORIGINAL ARTICLE 10 June 2021 Pages: 3791 - 3809

    

29. A study on intelligent grinding systems with industrial perspective

    • Ramesh Kuppuswamy
    • Fungai Jani
    • Quintin de Jongh

    ORIGINAL ARTICLE 11 June 2021 Pages: 3811 - 3827

    

30. Experimental research and process parameter optimization of high-speed friction stir welding

    • Hepeng Jia
    • Kai Wu
    • Huade Zhang

    ORIGINAL ARTICLE 11 June 2021 Pages: 3829 - 3838

    

31. Cylindricity and flatness optimization for mechanical parts in additive manufacturing based on tolerance adaptive slicing

    • Qianyong Chen
    • Jinghua Xu
    • Shuyou Zhang

    ORIGINAL ARTICLE 11 June 2021 Pages: 3839 - 3857

    

32. Vision-based real-time monitoring of extrusion additive manufacturing processes for automatic manufacturing error detection

    • Paschalis Charalampous
    • Ioannis Kostavelis
    • Dimitrios Tzovaras

    ORIGINAL ARTICLE 11 June 2021 Pages: 3859 - 3872

    

33. An integrated curvature surface inspection and prediction system for 5-axis synchronization machining

    • Chung-Feng Jeffrey Kuo
    • Wei-Han Weng

    ORIGINAL ARTICLE 12 June 2021 Pages: 3873 - 3886

    

34. Effectiveness analysis of abrasive flow polishing S-shaped elbow with side holes based on large eddy simulation

    • Junye Li
    • Jiyong Qu
    • Xueguang Li

    ORIGINAL ARTICLE 12 June 2021 Pages: 3887 - 3906

    

35. Wire Servo Discharge Grooving technology based on WEDM for beam tunnel fabrication

    • Weiran Yuan
    • Yongbin Zhang
    • Bo Hu

    ORIGINAL ARTICLE 12 June 2021 Pages: 3907 - 3917

    

36. Influences of powder characteristics and recoating conditions on surface morphology of powder bed in metal additive manufacturing

    • Kenya Yuasa
    • Masaharu Tagami
    • Hideki Kyogoku

    ORIGINAL ARTICLE Open access 12 June 2021 Pages: 3919 - 3932

    

37. Measurement and modeling methods of grinding-induced residual stress distribution of gear tooth flank

    • Yuliang Xiao
    • Shilong Wang
    • Jianpeng Dong

    ORIGINAL ARTICLE 12 June 2021 Pages: 3933 - 3944

    

38. Multi-objective optimization of solvent cast 3D printing process parameters for fabrication of biodegradable composite stents

    • Jasvinder Singh
    • Gurminder Singh
    • Pulak Mohan Pandey

    ORIGINAL ARTICLE 12 June 2021 Pages: 3945 - 3964

    

39. Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication

    • Julián I. Aguilar-Duque
    • Cesar O. Balderrama-Armendáriz
    • Jorge L. García-Alcaraz

    ORIGINAL ARTICLE 12 June 2021 Pages: 3965 - 3981

    

40. Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel

    • Youssef Touggui
    • Alper Uysal
    • Mustapha Temmar

    ORIGINAL ARTICLE 12 June 2021 Pages: 3983 - 3997

    

41. Effect of the parametric optimization and heat-treatment on the 18Ni-300 maraging steel microstructural properties manufactured by directed energy deposition

    • Christian Félix-Martínez
    • Juansethi Ibarra-Medina
    • Juan Manuel Alvarado-Orozco

    ORIGINAL ARTICLE 12 June 2021 Pages: 3999 - 4020

    

42. Experimental study on surface integrity and subsurface damage of fused silica in ultra-precision grinding

    • Yaoyu Zhong
    • Yifan Dai
    • Feng Shi

    ORIGINAL ARTICLE 12 June 2021 Pages: 4021 - 4033

    

43. Effect of heat input on macro morphology and porosity of laser-MIG hybrid welded joint for 5A06 aluminum alloy

    • Yanqiu Zhao
    • Xiaohong Zhan
    • Yue Kang

    ORIGINAL ARTICLE 12 June 2021 Pages: 4035 - 4045

    

44. Research on laser-assisted orthogonal micromachining technology of C_f/SiC composite

    • Jinkai Xu
    • Jiwen Tian
    • Huadong Yu

    Application 11 June 2021 Pages: 4047 - 4058