1. A proposed Common Single-Die Exchange Technique (C-SDET) to enhance production of pulleys

   • Nara Nakeenopakun
   • Yingyot Aue-u-lan

   ORIGINAL ARTICLE 19 April 2020 Pages: 3625 - 3643

   

2. Anisotropy of additively manufactured AlSi10Mg: threads and surface integrity

   • Rizwan Ullah
   • Jan Sher Akmal
   • Esko Niemi

   ORIGINAL ARTICLE Open access 19 April 2020 Pages: 3645 - 3662

   

3. Improving the machining dynamics performance and efficiency for complex channel part manufacturing by planning the tool orientations and feed rate sequence

   • Wenbo Zhang
   • Junxue Ren

   ORIGINAL ARTICLE 20 April 2020 Pages: 3663 - 3689

   

4. Digital twin: current scenario and a case study on a manufacturing process

   • Rohan Basu Roy
   • Debasish Mishra
   • Sudip Misra

   ORIGINAL ARTICLE 20 April 2020 Pages: 3691 - 3714

   

5. Experimental investigation on the machinability of CFRP/Invar36 hybrid co-cured material in turning operations

   • Qinglong An
   • Fan Zou
   • Ming Chen

   ORIGINAL ARTICLE 21 April 2020 Pages: 3715 - 3726

   

6. A review of the application of component-based software development in open CNC systems

   • Lisi Liu
   • Yingxue Yao
   • Jianguang Li

   ORIGINAL ARTICLE 21 April 2020 Pages: 3727 - 3753

   

7. Controlling the sintering response in the development of multilayered components produced via powder injection molding route—a review

   • O. J. Ojo-kupoluyi
   • S. M. Tahir
   • M. S. Anuar

   ORIGINAL ARTICLE 21 April 2020 Pages: 3755 - 3777

   

8. Comparative evaluation of soybean oil–based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718

   • Anthony Chukwujekwu Okafor
   • Theodore Obumselu Nwoguh

   ORIGINAL ARTICLE 21 April 2020 Pages: 3779 - 3793

   

9. Laser-based precise measurement of tailor welded blanks: a case study

   • Yuanyuan Zou
   • Kezhu Zuo
   • Dalin Zhou

   ORIGINAL ARTICLE 22 April 2020 Pages: 3795 - 3805

   

10. Submerged micro grinding: a metalworking fluid application study

    • Peter A. Arrabiyeh
    • Marius Heintz
    • Jan C. Aurich

    ORIGINAL ARTICLE Open access 22 April 2020 Pages: 3807 - 3815

    

11. A novel 3D surface topography prediction algorithm for complex ruled surface milling and partition process optimization

    • Wei Wang
    • Qingzhao Li
    • Yunfeng Jiang

    ORIGINAL ARTICLE 22 April 2020 Pages: 3817 - 3831

    

12. An experimental and numerical analysis of water jet peening of Al6061-T6

    • Zhanshu He
    • Huixin Yu
    • Shuai Wang

    ORIGINAL ARTICLE 22 April 2020 Pages: 3833 - 3845

    

13. Delamination in rotary ultrasonic machining of CFRP composites: finite element analysis and experimental implementation

    • Dongzhe Zhang
    • Hui Wang
    • Weilong Cong

    ORIGINAL ARTICLE 22 April 2020 Pages: 3847 - 3858

    

14. Fault diagnosis of rolling bearings in non-stationary running conditions using improved CEEMDAN and multivariate denoising based on wavelet and principal component analyses

    • Lilia Chaabi
    • Ahcene Lemzadmi
    • Nouredine Ouelaa

    ORIGINAL ARTICLE 22 April 2020 Pages: 3859 - 3873

    

15. Carbon solid lubricants: role of different dimensions

    • Shiwen Wu
    • Siyu Tian
    • Guoping Xiong

    ORIGINAL ARTICLE 22 April 2020 Pages: 3875 - 3895

    

16. Multi-objective optimization of experimental and analytical residual stresses in pre-stressed cutting of thin-walled ring using glowworm swarm optimization algorithm

    • Chengyan Zhang
    • Lixin Wang
    • Wuzhou Meng

    ORIGINAL ARTICLE 22 April 2020 Pages: 3897 - 3908

    

17. Effect of hydroforming process on the formability of fiber metal laminates using semi-cured preparation

    • Lei Li
    • Lihui Lang
    • Quanda Zhang

    ORIGINAL ARTICLE 22 April 2020 Pages: 3909 - 3920

    

18. A novel comprehensive thermal error modeling method by using the workpiece inspection data from production line for CNC machine tool

    • Puling Liu
    • Zhengchun Du
    • Jianguo Yang

    ORIGINAL ARTICLE 22 April 2020 Pages: 3921 - 3930

    

19. Tribological performance of hybrid surfaces: dimple-shaped anodized Al alloy surfaces coated with WS-CF sputtered thin films

    • S. P. Rodrigues
    • S. Carvalho
    • A. Cavaleiro

    ORIGINAL ARTICLE 22 April 2020 Pages: 3931 - 3941

    

20. Analytical model of cutting temperature field in workpiece including uncut chip layer

    • Yi Gao
    • Kun Huang
    • Wenyu Yang

    ORIGINAL ARTICLE 23 April 2020 Pages: 3943 - 3952

    

21. Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

    • Xiuli Shen
    • Kun Gao
    • Shaojing Dong

    ORIGINAL ARTICLE 23 April 2020 Pages: 3953 - 3966

    

22. Cutting performance of micro-textured WC/Co tools in the dry cutting of Ti-6Al-4V alloy

    • Na Zhang
    • Fazhan Yang
    • Guohua Liu

    ORIGINAL ARTICLE 23 April 2020 Pages: 3967 - 3979

    

23. Experimental study of thrust force and surface quality when drilling hybrid stacks

    • Amani Mahdi
    • Yosra Turki
    • Zoubeir Bouaziz

    ORIGINAL ARTICLE 23 April 2020 Pages: 3981 - 3994

    

24. Increasing the efficiency of material removal using dual laser micromachining

    • Osama Alkhawaldeh
    • Jeremy Coupland
    • Lewis C. R. Jones

    ORIGINAL ARTICLE Open access 23 April 2020 Pages: 3995 - 4007

    

25. Modeling and experimental study of different discontinuous micro-grinding tools

    • Tao Yu
    • Jun Cheng
    • Zhaozhi Guo

    ORIGINAL ARTICLE 24 April 2020 Pages: 4009 - 4032

    

26. Additive manufacturing cost estimation models—a classification review

    • Aini Zuhra Abdul Kadir
    • Yusri Yusof
    • Md Saidin Wahab

    ORIGINAL ARTICLE 24 April 2020 Pages: 4033 - 4053

    

27. Study on pipeline self-excited vibration using transient fluid-structure coupling method

    • Jia Wu
    • Shuiying Zheng
    • Zhenping Yu

    ORIGINAL ARTICLE 24 April 2020 Pages: 4055 - 4068

    

28. Prediction of the deformation behavior of a selective laser-melted Ti-6Al-4V alloy as a function of process parameters

    • Mostafa Mahdavi
    • Elham Mirkoohi
    • Hamid Garmestani

    ORIGINAL ARTICLE 24 April 2020 Pages: 4069 - 4076

    

29. Bearing fault diagnostics using EEMD processing and convolutional neural network methods

    • Iskander Imed Eddine Amarouayache
    • Mohamed Nacer Saadi
    • Nadir Boutasseta

    ORIGINAL ARTICLE 24 April 2020 Pages: 4077 - 4095

    

30. A review on the porous medium approaches to model the flow of interdendritic liquid during the solidification of alloys in casting processes: theory and experiments

    • Antonio Rodríguez de Castro

    ORIGINAL ARTICLE 24 April 2020 Pages: 4097 - 4121

    

31. Ensemble transfer learning for refining stability predictions in milling using experimental stability states

    • M. Postel
    • B. Bugdayci
    • K. Wegener

    ORIGINAL ARTICLE 24 April 2020 Pages: 4123 - 4139

    

32. Milling of Ti–6Al–4V under hybrid Al₂O₃-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining

    • Muhammad Jamil
    • Aqib Mashood Khan
    • Zhanqiang Liu

    ORIGINAL ARTICLE 25 April 2020 Pages: 4141 - 4157

    

33. Analytical mechanics modeling of residual stress in laser powder bed considering flow hardening and softening

    • Elham Mirkoohi
    • Hong-Chuong Tran
    • Steven Y. Liang

    ORIGINAL ARTICLE 25 April 2020 Pages: 4159 - 4172

    

34. Iterative from error prediction for side-milling of thin-walled parts

    • Zhitao Chen
    • Caixu Yue
    • Xiaochen Li

    ORIGINAL ARTICLE 25 April 2020 Pages: 4173 - 4189

    

35. Effect of temperature buildup on milling forces in additive/subtractive hybrid manufacturing of Ti-6Al-4V

    • Shuai Li
    • Bi Zhang
    • Qian Bai

    ORIGINAL ARTICLE 25 April 2020 Pages: 4191 - 4200

    

36. Predicting cutting force with unequal division parallel-sided shear zone model for orthogonal cutting

    • Jinhua Zhou
    • Junxue Ren

    ORIGINAL ARTICLE 25 April 2020 Pages: 4201 - 4211

    

37. Parametric study of warpage in PBGA packages

    • John S. Kang

    ORIGINAL ARTICLE 25 April 2020 Pages: 4213 - 4219

    

38. Adaptive machining framework for the leading/trailing edge of near-net-shape integrated impeller

    • Yun Zhang
    • Zhitong Chen
    • Zhengqing Zhu

    ORIGINAL ARTICLE 25 April 2020 Pages: 4221 - 4229

    

39. Model-based monitoring of temperatures and heat flows in the milling cutter

    • T. Augspurger
    • G. Da Silva
    • T. Bergs

    ORIGINAL ARTICLE Open access 25 April 2020 Pages: 4231 - 4238

    

40. Automatic minimal partitioning method guaranteeing machining efficiency of free-form surfaces using a toroidal tool

    • Duy Duc Vu
    • Frédéric Monies
    • Walter Rubio

    ORIGINAL ARTICLE 25 April 2020 Pages: 4239 - 4254

    

41. Influence of complex geometries on the properties of laser-hardened surfaces

    • Joerg Volpp
    • Handika Sandra Dewi
    • Thomas Niendorf

    ORIGINAL ARTICLE Open access 25 April 2020 Pages: 4255 - 4260

    

42. A tool path generation method based on smooth machine rotary angle and tilt angle in five-axis surface machining with torus cutters

    • Yu Zhang
    • Rufeng Xu
    • Jianbing Meng

    ORIGINAL ARTICLE 25 April 2020 Pages: 4261 - 4271

    

43. Surface quality improvement and support material reduction in 3D printed shell products based on efficient spectral clustering

    • Rui Li
    • Qingjin Peng

    ORIGINAL ARTICLE 25 April 2020 Pages: 4273 - 4286

    

44. Study on surface roughness and top burr of micro-milled Zr-based bulk metallic glass in shear dominant zone

    • Tao Wang
    • Xiaoyu Wu
    • Shuangchen Ruan

    ORIGINAL ARTICLE 26 April 2020 Pages: 4287 - 4299

    

45. Rolling bearing faults severity classification using a combined approach based on multi-scales principal component analysis and fuzzy technique

    • Mohamed Khemissi Babouri
    • Abderrazek Djebala
    • Ramdane Younes

    ORIGINAL ARTICLE 26 April 2020 Pages: 4301 - 4316

    

46. On the effect of the measurement error on Shewhart t and EWMA t control charts

    • Huu Du Nguyen
    • Kim Phuc Tran
    • Philippe Castagliola

    ORIGINAL ARTICLE 26 April 2020 Pages: 4317 - 4332

    

47. Cross-sectional deformation of high strength steel rectangular welded tube in rotary draw bending with different constitutive relationships

    • Hailong Liu
    • Yuli Liu
    • Xiaoyu Du

    ORIGINAL ARTICLE 27 April 2020 Pages: 4333 - 4344

    

48. Machining deformation prediction of large fan blades based on loading uneven residual stress

    • Changfeng Yao
    • Jiyin Zhang
    • Xuehong Shen

    ORIGINAL ARTICLE 27 April 2020 Pages: 4345 - 4356