1. Reduction of flow-induced noise in a household air purifier

   • Booyeong Lee
   • Woojeong Sim
   • Jintai Chung

   Original Article 07 August 2020 Pages: 3105 - 3115

2. Thermal buckling and dynamic characteristics of composite plates under pressure load

   • Xuan Yang
   • Qingguo Fei
   • Yanbin Li

   Original Article 07 August 2020 Pages: 3117 - 3125

3. Influence of geometric nonlinearity of rectangular plate on vibration reduction performance of nonlinear energy sink

   • Wei-xing Zhang
   • Jian-en Chen

   Original Article 07 August 2020 Pages: 3127 - 3135

4. Vibration analysis of aero parallel-pipeline systems based on a novel reduced order modeling method

   • Peixin Gao
   • Yuanlin Zhang
   • Jiao Wang

   Original Article 07 August 2020 Pages: 3137 - 3146

5. Semi-analytical approch for brake squeal of a rail pad

   • Jaehyeon Nam
   • Jaeyoung Kang

   Original Article 07 August 2020 Pages: 3147 - 3153

6. Electrical tuning for sensitivity enhancement of a piezo-electric ultrasonic transducer: Simulation and fabrication

   • Geonwoo Kim
   • Young-In Hwang
   • Ki-Bok Kim

   Original Article 07 August 2020 Pages: 3155 - 3164

7. An improved design of power-cycling hydrodynamic mechanical transmission

   • Xiaojun Liu
   • Dongye Sun

   Original Article 07 August 2020 Pages: 3165 - 3179

8. Fault analysis of CNC equipment based on DEMATEL/ISM/ANP

   • Sun Shuguang
   • Zhou Wenjie
   • Mou Xiaowan

   Original Article 07 August 2020 Pages: 3181 - 3188

9. Failure correlation reliability analysis of solid rocket motor grain based on polynomial chaos expansion

   • Yangtian Li
   • Haibin Li
   • Guangmei Wei

   Original Article 07 August 2020 Pages: 3189 - 3195

10. Research on the solidified morphologies of successive pileup metal droplets

    • Congping Chen
    • Jieguang Huang
    • Yi Zhang

    Original Article 07 August 2020 Pages: 3197 - 3205

11. A new constant life diagram model for the longitudinal fatigue of unidirectional composites

    • Yuanchen Huang
    • Sung Kyu Ha

    Original Article 07 August 2020 Pages: 3207 - 3216

12. Experimental observation of oil mist penetration ability in minimum quantity lubrication (MQL) spray

    • Guangyuan Zhu
    • Songmei Yuan
    • Bochuan Chen

    Original Article 07 August 2020 Pages: 3217 - 3225

13. Corrosion and wear behavior of TiN PVD coated 304 stainless-steel

    • Awais Awan
    • Riffat Asim Pasha
    • Hussein Alrobei

    Original Article 07 August 2020 Pages: 3227 - 3232

14. Study on the densification behaviour of copper with aluminum & nickel powders through spark plasma sintering

    • K. Thiruppathi
    • R. Raj Mohan
    • S. Raghuraman

    Original Article 07 August 2020 Pages: 3233 - 3237

15. Analysis of skid damage to cylindrical roller bearing of mainshaft of aeroengine

    • Xiangyu Xie
    • Jin Xu
    • Jun Luo

    Original Article 07 August 2020 Pages: 3239 - 3247

16. Investigation of creep behavior of 316L stainless steel produced by selective laser melting with various processing parameters

    • Jong Min Yu
    • Van Hung Dao
    • Kee Bong Yoon

    Original Article 07 August 2020 Pages: 3249 - 3259

17. Effects of process parameters on the high temperature strength of 17-4PH stainless steel produced by selective laser melting

    • Ho Jun Lee
    • Van Hung Dao
    • Kee Bong Yoon

    Original Article 07 August 2020 Pages: 3261 - 3272

18. Experimental and numerical study on the tensile, three-point-bending, and interlaminar fracture toughness of GLARE

    • Bassem Dahshan
    • Abdel-Halim M. El-Habbak
    • Mostafa Shazly

    Original Article 07 August 2020 Pages: 3273 - 3281

19. Changes in creep property and precipitates due to aging of T91 steel after long-term service

    • Vanno Lok
    • Thi Giang Le
    • Kee Bong Yoon

    Original Article 07 August 2020 Pages: 3283 - 3293

20. A study on fracture characteristic of structural adhesive at bonded specimen made by 3D printer

    • Jae Won Kim
    • Chang Ho Jung
    • Jae Ung Cho

    Original Article 07 August 2020 Pages: 3295 - 3302

21. Numerical study on the effect of staggered wire electrodes in an electrostatic precipitator

    • Ho Yeon Choi
    • Yong Gap Park
    • Man Yeong Ha

    Original Article 07 August 2020 Pages: 3303 - 3310

22. Study on fall velocity of continuously ejected micro inkjet droplet

    • Seung-Hwan Kang
    • San Kim
    • Han Seo Ko

    Original Article 07 August 2020 Pages: 3311 - 3315

23. A numerical investigation on the performance improvement of axial-flow automotive cooling fan with beads

    • K. H. Hur
    • B. A. Haider
    • C. H. Sohn

    Original Article 07 August 2020 Pages: 3317 - 3323

24. Study on the influence of the specific area of balance hole on cavitation performance of high- speed centrifugal pump

    • Xiaorui Cheng
    • Zhengbai Chang
    • Yimeng Jiang

    Original Article 07 August 2020 Pages: 3325 - 3334

25. Self-adjusting on-line cutting condition for high-speed milling process

    • Tien-Dung Hoang
    • Quang-Vinh Nguyen
    • Ngoc-Hien Tran

    Original Article 07 August 2020 Pages: 3335 - 3343

26. Experimental investigation on the CO₂ laser cutting of soda-lime glass

    • SeungGu Kang
    • Joonghan Shin

    Original Article 07 August 2020 Pages: 3345 - 3351

27. Roughness modeling for polishing an aero-engine blade with an abrasive cloth wheel

    • Chao Xian
    • Yaoyao Shi
    • De Liu

    Original Article 07 August 2020 Pages: 3353 - 3361

28. An active learning hybrid reliability method for positioning accuracy of industrial robots

    • Dequan Zhang
    • Song Liu
    • Jie Liu

    Original Article 07 August 2020 Pages: 3363 - 3372

29. Bus LNG container heat insulated performance estimate

    • Zheng-qing Li
    • Xiao-jin Li

    Original Article 07 August 2020 Pages: 3373 - 3377

30. Physical property effects of the compression process with supercritical carbon dioxide as working fluid

    • Jinlan Gou
    • Kelong Zhang
    • Hanbing Ke

    Original Article 07 August 2020 Pages: 3379 - 3393

31. Effect of sinusoidal cylindrical surface of PCM on melting performance

    • Abhishek Awasthi
    • Binit Kumar
    • Jae Dong Chung

    Original Article 07 August 2020 Pages: 3395 - 3402

32. Experimental evaluation of on-road fuel consumption for a 2.2 L diesel-fueled vehicle at two driving routes

    • Tahkkyoo Kim
    • Insu Cho
    • Jinwook Lee

    Original Article 07 August 2020 Pages: 3403 - 3413

33. Thermofluidic analysis of interior permanent magnet synchronous motors with internal air circulation by protrusion-shaped flow inducers for effective thermal management

    • Jonghyo Lee
    • Namkwon Lee
    • Sukkee Um

    Original Article 07 August 2020 Pages: 3415 - 3426

34. Water spray heat transfer through a piezoelectric atomizer with a single-hole micronozzle

    • Shou-Shing Hsieh
    • Ching-Feng Huang
    • Yung-Ming Lu

    Original Article 07 August 2020 Pages: 3427 - 3436

35. Assessment of solar energy potential and its deployment for cleaner production in Pakistan

    • Muhammad M. Rafique
    • S. Rehman
    • Luai M. Alhems

    Original Article 07 August 2020 Pages: 3437 - 3443

36. Analysis on mass flow rate of R22 and R407C through coiled adiabatic capillary tubes with GA and PSO optimized BP networks

    • Guobing Zhou
    • Yuchen Zhou

    Original Article 07 August 2020 Pages: 3445 - 3455

37. Unsteady characteristics of laminar free convection in an enclosure in the presence of power law fluid at Ra = 10⁷

    • Sudhanshu Pandey
    • Yong Gap Park
    • Man Yeong Ha

    Original Article 07 August 2020 Pages: 3457 - 3470

38. Evaluation of heat storage and release in a double shell and tube heat exchanger with a PCM layer

    • Donggyu Lee
    • Chaedong Kang

    Original Article 07 August 2020 Pages: 3471 - 3480

39. Prediction of the thorax/pelvis orientations and L5–S1 disc loads during various static activities using neuro-fuzzy

    • Seiyed Hamid Mousavi
    • Hassan Sayyaadi
    • Navid Arjmand

    Original Article 07 August 2020 Pages: 3481 - 3485