Articles

1. The Impact of the Hydrogen Index of the Process Fluid on Diamond Abrasive Wheel Performance

   • V. I. Lavrinenko

   LETTERS TO THE EDITOR 04 March 2024 Pages: 76 - 79

2. Dynamic Tensile Strength Limit of BL-Group Ceramic Matrix Composites Synthesized in the cBN–Carbide–Al System

   • D. A. Stratiichuk
   • L. M. Devin
   • V. Z. Turkevich

   LETTERS TO THE EDITOR 04 March 2024 Pages: 74 - 75

3. Flotation Separation as a Method of Improving the Uniformity of Synthetic Diamond Powders by Their Morphometric Characteristics, Grain Shape, and Grain Composition

   • G. A. Petasyuk
   • H. D. Ilnytska
   • Yu. V. Syrota

   TOOLS, POWDERS, PASTES 04 March 2024 Pages: 65 - 73

   

4. Deposition and Localization of Polishing Powder Wear Nanoparticles on the Processed Surface of Polymeric Optical Materials

   • Yu. D. Filatov
   • V. I. Sidorko
   • O. Y. Yurchyshyn

   INVESTIGATION OF MACHINING PROCESSES 04 March 2024 Pages: 55 - 64

   

5. Increasing the Lifetime of Water Transportation Vehicles by Using Multifunctional Composites with a Polymer Matrix, Ultradisperse Diamond, and Discrete Fibrous Filler

   • A. V. Buketov
   • Yu. M. Shulga
   • O. A. Pastukh

   PRODUCTION, STRUCTURE, PROPERTIES 04 March 2024 Pages: 40 - 54

   

6. Investigation of the Influence of High Speed Sintering Regimes on the Structure and Properties of WC Based Carbide Composites with High Entropy Bonding

   • O. A. Yurkova
   • A. V. Minitskyi
   • I. I. Bilyk

   PRODUCTION, STRUCTURE, PROPERTIES 04 March 2024 Pages: 32 - 39

   

7. Anisotropic Charge Transport in HPHT Diamonds

   • V. І. Grushko
   • R. Yu. Chaplynskyi
   • T. V. Mykytiuk

   PRODUCTION, STRUCTURE, PROPERTIES 04 March 2024 Pages: 23 - 31

   

8. Methodology for Studying Brittle Fracture of HTHP Diamond Single Crystals by Crack Propagation Analysis under Shock Load

   • L. M. Devin
   • P. M. Lytvyn
   • O. O. Zanevskyi

   PRODUCTION, STRUCTURE, PROPERTIES 04 March 2024 Pages: 14 - 22

   

9. Dielectric Properties of Synthetic Diamond Polycrystals

   • L. O. Romanko
   • O. O. Bochechka
   • O. V. Kush

   PRODUCTION, STRUCTURE, PROPERTIES 04 March 2024 Pages: 1 - 13

   

10. Manufacturing Tool-Grade Cermet Cr₂O₃–22Cr by Spark Plasma Sintering at Pressures up to 800 MPa

    • M. M. Prokopiv
    • O. V. Kharchenko
    • I. D. Gnylycya

    LETTERS TO THE EDITOR 18 January 2024 Pages: 477 - 480

    

11. Studying the Performance Features of Drilling Rock Destruction and Technological Tools

    • Ye. A. Koroviaka
    • A. O. Ihnatov
    • S. O. Shypunov

    TOOLS, POWDERS, PASTES 18 January 2024 Pages: 466 - 476

    

12. Phenomenon of Lagging in the Values of Grinding Wheel Performance Characteristics Due to the Radial Transformation of the Cutting Surface of a Wheel under Abrasive Diamond Treatment

    • V. I. Lavrinenko

    INVESTIGATION OF MACHINING PROCESSES 18 January 2024 Pages: 460 - 465

    

13. Scattering of Polishing Powder Wear Nanoparticles on Sludge Nanoparticles during the Polishing of Polymer Optical Materials

    • Yu. D. Filatov
    • V. I. Sidorko
    • O. Y. Yurchyshyn

    INVESTIGATION OF MACHINING PROCESSES 18 January 2024 Pages: 451 - 459

    

14. Influence of Temperature in Barothermal Treatment of Sintered Cemented Carbides on the Evolution of Their Structure and Properties

    • I. O. Hnatenko
    • I. V. Andreiev
    • T. O. Kosenchuk

    PRODUCTION, STRUCTURE, PROPERTIES 18 January 2024 Pages: 444 - 450

    

15. Recent Advancements in the Synthesis of High-Entropy Boride Ceramics: A Review

    • Mantang Duan
    • I. V. Solodkyi
    • Y. I. Bogomol

    PRODUCTION, STRUCTURE, PROPERTIES 18 January 2024 Pages: 434 - 443

    

16. Effect of Varying Graphite Concentration on Electrodynamic Properties of AlN-Based Composite Materials

    • T. B. Serbeniuk
    • T. O. Prikhna
    • L. O. Polikarpova

    PRODUCTION, STRUCTURE, PROPERTIES 18 January 2024 Pages: 424 - 433

    

17. Octahedral Overgrowth Structures on Impact Diamond

    • R. Wirth
    • V. M. Kvasnytsya
    • A. Schreiber

    PRODUCTION, STRUCTURE, PROPERTIES 18 January 2024 Pages: 418 - 423

    

18. The Role of Microfibers and Liquid Aluminum in the Reaction between Boron Nitride and Tantalum Nitride

    • Yu. Yu. Rumiantseva
    • S. O. Lysovenko
    • D. V. Turkevych

    PRODUCTION, STRUCTURE, PROPERTIES 18 January 2024 Pages: 415 - 417

    

19. Novel Ultrahard Carbon Allotropes from Crystal Chemistry and First Principles: Rhombohedral ene-C₂₁ and yne-C₂₄

    • Samir F. Matar
    • Vladimir L. Solozhenko

    PRODUCTION, STRUCTURE, PROPERTIES 18 January 2024 Pages: 405 - 414

    

20. Effect of Silicon Carbide Content on Bulk Electrical Resistance of Free-Sintered AlN–SiC Composites

    • V. I. Chasnyk
    • D. V. Chasnyk
    • O. M. Kaidash

    LETTERS TO THE EDITOR 13 November 2023 Pages: 402 - 404

    

21. On Crystal Structure of Superhard Cubic BC₂N

    • V. L. Solozhenko

    LETTERS TO THE EDITOR 13 November 2023 Pages: 399 - 401

    

22. Thermal Phenomena on the Front Surface of Tools with PcBN during Turning of Hardened Steel

    • S. A. Klymenko
    • S. An. Klymenko
    • Yu. O. Melniychuk

    TOOLS, POWDERS, PASTES 13 November 2023 Pages: 388 - 398

    

23. Rate of Material Removal When Processing Titanium-Doped Sapphire

    • O. O. Vovk
    • A. V. Voloshin
    • S. V. Nizhankovskyi

    INVESTIGATION OF MACHINING PROCESSES 13 November 2023 Pages: 379 - 387

    

24. Scattering of Sludge Nanoparticles during the Polishing of Optical Materials

    • Yu. D. Filatov
    • V. I. Sidorko
    • O. Y. Yurchyshyn

    INVESTIGATION OF MACHINING PROCESSES 13 November 2023 Pages: 370 - 378

    

25. Vacuum Carbothermal Synthesis of TiB₂

    • Mehmet Bugdayci
    • Şeyma Güleç

    PRODUCTION, STRUCTURE, PROPERTIES 13 November 2023 Pages: 360 - 369

    

26. Features Structure of the С_diamond‒(WC‒Co)‒ZrO₂ Composite Fracture Surface as a Result of Impact Loading

    • B. T. Ratov
    • V. A. Mechnik
    • V. G. Kulych

    PRODUCTION, STRUCTURE, PROPERTIES 13 November 2023 Pages: 348 - 359

    

27. Effect of the Granular Composition of Diamond Powder Synthesized in the Mg–Zn–C System on the Structure, Physicomechanical Properties, and Performance Characteristics of Crystals Sintered from It under High Pressure

    • O. O. Bochechka
    • O. V. Kushch
    • Yu. Yu. Rumiantseva

    PRODUCTION, STRUCTURE, PROPERTIES 13 November 2023 Pages: 336 - 347

    

28. Structure, Mechanical Properties, and High-Temperature Stability of ZrB₂- and HfB₂-Based Materials

    • T. O. Prikhna
    • A. S. Lokatkina
    • O. V. Prisyazhna

    PRODUCTION, STRUCTURE, PROPERTIES 13 November 2023 Pages: 321 - 335

    

29. Main Morphological Varieties of Diamond Cubes

    • V. M. Kvasnytsya

    LETTERS TO EDITOR 29 September 2023 Pages: 316 - 320

    

30. Defectiveness of Low Strength Synthetic Diamond Grains: Negative and Positive Aspects in Case of Using Them in a Grinding Tool

    • V. V. Smokvyna
    • V. I. Lavrinenko
    • H. D. Ilnytska

    TOOLS, POWDERS, PASTES 29 September 2023 Pages: 306 - 315

    

31. Diamond Grinding of Ceramic Balls with a Circular Feed

    • S. V. Sokhan’
    • V. V. Voznyy
    • M. P. Hamaniuk

    INVESTIGATION OF MACHINING PROCESSES 29 September 2023 Pages: 293 - 305

    

32. Characteristics, Machinability Modeling, and Machining Performance Improvement of Graphene Reinforced Al-MMC Using CRSM and Utility Method

    • Manojit Das
    • Soumya R. Parimanik
    • Dilip Kumar Sahu

    INVESTIGATION OF MACHINING PROCESSES 29 September 2023 Pages: 266 - 292

    

33. Effect of Al₂O₃ and Yb₂O₃ on Mechanical Performances and Thermal Shock Behaviors of Zirconia Composites Prepared by SPS

    • Junlong Sun
    • Weifu Zhao
    • Changxia Liu

    PRODUCTION, STRUCTURE, PROPERTIES 29 September 2023 Pages: 255 - 265

    

34. Specific Features of Measuring the Elasticity Modulus and the Decrement of Oscillations in Superhard Material Polycrystals by the Dynamic Method

    • L. M. Devin
    • M. P. Bezhenar
    • S. V. Rychev

    PRODUCTION, STRUCTURE, PROPERTIES 29 September 2023 Pages: 249 - 254

    

35. First Principles Search for Novel Ultrahard High-Density Carbon Allotropes: Hexagonal C₆, C₉, and C₁₂

    • Samir F. Matar
    • Vladimir L. Solozhenko

    PRODUCTION, STRUCTURE, PROPERTIES 29 September 2023 Pages: 239 - 248

    

36. Features of the Microstructure and Thermal Conductivity of Large-Size Parts from Pressureless Sintered AlN-Based Ceramic Composite

    • D. V. Chasnyk
    • A. V. Dovhal
    • V. B. Sverdun

    LETTERS TO THE EDITOR 19 July 2023 Pages: 235 - 237

    

37. Experimental Study and Finite-Element Modeling of the Intermittent Cutting of Steel AISI 52100 with a PcBN Containing Tool

    • Xin Li
    • Fei Teng
    • O. O. Pasichny

    TOOLS, POWDRES, PASTES 19 July 2023 Pages: 226 - 234

    

38. Degree of Filling of the Roughness Profile of the Surface Obtained by Diamond Abrasive Treatment as a Factor Affecting Its Bearing Capacity

    • V. I. Lavrinenko

    INVESTIGATION OF MACHINING PROCESSES 19 July 2023 Pages: 217 - 225

    

39. Wear Intensity of the Functional Components Made of Diamond-Containing Composite Materials during the Operation of Tools in the Process of Rock Destruction

    • A. L. Maystrenko
    • M. O. Bondarenko
    • N. O. Oleinyk

    INVESTIGATION OF MACHINING PROCESSES 19 July 2023 Pages: 208 - 216

    

40. Interaction of Sludge Particles and Wear Particles of Polishing Powder in the Process of Polishing of Polymeric Optical Materials

    • Yu. D. Filatov
    • V. I. Sidorko
    • O. Ya. Yurchishyn

    INVESTIGATION OF MACHINING PROCESSES 19 July 2023 Pages: 199 - 207

    

41. Research on the Structure and Properties of High Temperature and High Pressure Composite PCBN Tool Materials

    • Mo Peicheng
    • Chen Jiarong
    • Pan Xiaoyi

    PRODUCTION, STRUCTURE, PROPERTIES 19 July 2023 Pages: 192 - 198

    

42. Physical Dispersion Method and Mechanism of Graphene

    • Nan Zhang
    • Pan Ma
    • Zhiyu Zhang

    PRODUCTION, STRUCTURE, PROPERTIES 19 July 2023 Pages: 186 - 191

    

43. Effect of B₃Si on the Structure and Properties of B₄C Ceramics

    • P. V. Mazur
    • O. M. Grigoriev
    • D. V. Vedel

    PRODUCTION, STRUCTURE, PROPERTIES 19 July 2023 Pages: 175 - 185

    

44. Effect of the CrB₂ Additive Content on the Structure, Mechanical Properties, and Performance Characteristics of Diamond-Containing C_diamond–(WC–Co) Composite Materials Formed by Spark Plasma Sintering

    • B. T. Ratov
    • V. A. Mechnik
    • D. L. Korostyshevskiy

    PRODUCTION, STRUCTURE, PROPERTIES 19 July 2023 Pages: 161 - 174

    

45. Microstructure and Thermal Conductivity of Reaction-Sintered SiC

    • V. G. Kulych
    • I. P. Fesenko
    • V. V. Ivzhenko

    LETTERS TO THE EDITOR 09 May 2023 Pages: 158 - 160

    

46. Comparative Analysis of Grain Shape Characteristics and Abrasiveness of Natural Impact and Synthetic Diamond Powders

    • G. A. Petasyuk
    • Yu. V. Sirota

    TOOLS, POWDERS, PASTES 09 May 2023 Pages: 150 - 157

    

47. New Patterns of Polishing Surfaces of Parts Made of Nonmetallic Materials

    • Yu. D. Filatov

    INVESTIGATION OF MACHINING PROCESSES 09 May 2023 Pages: 140 - 149

    

48. Synthesis of TiC_0.5–Al and Effect of Sintering Temperature on Mechanical Properties of PcBN Composites

    • Xixi Hu
    • Ailing Sun
    • Yi Wu

    PRODUCTION, STRUCTURE, PROPERTIES 09 May 2023 Pages: 131 - 139

    

49. HP-HT Treatment of Hexagonal Boron Nitride for Higher Photocatalytic Degradation of Organic Pollutants

    • Liang Cui
    • Wangxi Zhang
    • Mingli Jiao

    PRODUCTION, STRUCTURE, PROPERTIES 09 May 2023 Pages: 126 - 130

    

50. Influence of the Rate of Gas Pressure Growth during Vacuum Compression Sintering on the Structure and Properties of the VK6M Hard Alloy

    • M. M. Prokopiv
    • Yu. P. Ushchapovskyi
    • H. P. Kysla

    PRODUCTION, STRUCTURE, PROPERTIES 09 May 2023 Pages: 118 - 125