Abstract
We investigated the effect of barothermal treatment at a pressure of 8 GPa and temperatures of 1450–1700°C on the structure and properties of cemented carbides with varying cobalt concentrations. The application of barothermal treatment led to a 30% increase in the grain size of the carbide phase and a decrease in overall porosity. For WC–6Co alloys treated under conditions of solid-phase sintering, an increase in hardness and the stress intensity factor are observed. The barothermal treatment of WC–15Co alloys at temperatures corresponding to the existence of a liquid phase leads to the formation of Co3W3C intermetallic phases.
REFERENCES
Xiang, Z., Li, Z., Chang, F., and Dai, P., Effect of heat treatment on the microstructure and properties of ultrafine WC–Co cemented carbide, Metals, 2019, vol. 9, no. 12, p. 1302.
Prokopiv, N.M., Bondarenko, V.P., Kharchenko, O.V., and Gnatenko, I.A., The effect of thermocompression treatment on the structure and properties of the WC–8Co alloy with Cr3C2 additives, Sverkhtverd. Mater., 2006, no. 6, pp. 47–51.
Petersson, A. and Ågren, J., Constitutive behaviour of WC–Co materials with different grain size sintered under load, Acta Mater., 2004, vol. 52, no. 7, pp. 1847–1858.
Rohlin, B., Ang Lsson, M.P., and Kesson, L., Patent 6071469A US. C22C1/05; C22C29/08; C23C30/00, 2000.
Mashhadikarimia, M., Gomes, U.U., Oliveira, M.P., Guimarães, R.D.S., and Filgueira, M., Study HTHP sintered WC/Co hardmetal, Mater. Res., 2017, vol. 20, no. 1, pp. 138–143.
Fan, X., He, D., Wang, P., Li, D., Liu, Y., Ma, D., Du, Y., Gao, S., and Kou, Z., High pressure infiltration sintering behavior of WC–Co alloys, High Pressure Res., 2016, vol. 36, no. 4, pp. 585–594.
Marques, C.M.F.G., Bobrovnitchii, G.S., and Holanda, J.N.F., High pressure sintering of WC–10Co doped with rare-earth elements, in Sintering of Ceramics. New Emerging Techniques, Lakshmanan, A., Ed., InTech, 2012.
Hnatenko, I.O., Andreiev, I.V., and Bondarenko, V.P., Analyzing the effect of high pressures and temperatures on the formation of the structure and properties of WC–Co hard alloys, J. Superhard Mater., 2021, vol. 43, no. 4, pp. 261–264.
Gnatenko, I., Andreiev, I., Lysovenko, S., Bondarenko, V., Loshak, M., and Shulzhenko, O., Treatment by high pressure of WC–Co cemented carbides, Int. Conf. “E-MRS fall Meeting” (15–19 September, 2015), Warsaw: Warsaw University of Technology, 2015.
Andreiev, I.V., Gnatenko, I.O., Lysovenko, S.O., and Gargin, V.G., Influence of high pressure and temperature on the structure and properties of the WC–6Co hard alloy, J. Superhard Mater., 2018, vol. 40, no. 2, pp. 127–130.
Baek, M.S., Park, H.S., Lee, J., and Lee, K.A., Effect of diamond particle size on the microstructure and wear property of high pressure high temperature (HPHT) sintered polycrystalline diamond compact (PDC), J. Korean Inst. Met. Mater., 2017, vol. 55, no. 11, pp. 790–797.
Rodrigues, M.F., Bobrovnitchii, G.S., Ramalho, A.M., Filgueira, M., Pressure assisted WC–15%wt Co sintering, Mater. Sci. Forum, 2005, pp. 498–499.
Karimi, M.M., Gomes, U.U., Oliveira, M.P., Guimarгes, R.D.S., and Filgueira, M., High pressure assisted WC/Co hardmetal sintering–effect of sintering temperature, AIP Conf. Proc., 2017, vol. 1809, p. 020025.
Shul’zhenko, A.A., Gargin, V.G., Shishkin, V.A., and Bochechka, A.A., Polikristallicheskie materialy na osnove almaza (Polycrystalline Diamond-Based Materials), Novikov, N.V., Ed., Kyiv: Naukova Dumka, 1989.
Fomina, O.I., Suvorova, S.N., and Turetskii, Ya.M., Poroshkovaya metallurgiya. Entsiklopediya mezhdunarodnykh standartov (Powder Metallurgy. Encyclopedia of International Standards), Moscow: IPK Izd. Standartov, 1999.
Sokolov, O.M., Gargin, V.G., and Rusinova, N.O., The structure and physical and mechanical properties of a diamond hybrid polycrystalline composite obtained by sintering at high pressures, in Science and Technology: Problems, Prospects and Innovations. Proc. 5th Int. Sci. and Pract. Conf., Osaka: CPN Publishing Group, 2023, pp. 119–125.
Loshak, M.G., Prochnost’ i dolgovechnost’ tverdykh splavov (Strength and Durability of Hard Alloys), Kyiv: Naukova Dumka, 1984.
Bennett, E.G. and Roebuck, B., The metallographic measurement of hardmetal grain size, in Measurement Good Practice Guide, 2000, no. 22.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by O. Zhukova
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Hnatenko, I.O., Andreiev, I.V., Lysovenko, S.O. et al. Influence of Temperature in Barothermal Treatment of Sintered Cemented Carbides on the Evolution of Their Structure and Properties. J. Superhard Mater. 45, 444–450 (2023). https://doi.org/10.3103/S1063457623060047
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457623060047