1. Preparation of monosized ultrafine particles of precious metals utilizing an emulsion-type liquid membrane technique

   • Hiroshi Majima
   • Tetsuji Hirato
   • Toshitaka Hibi

   OriginalPaper Pages: 397 - 404

2. Desulfurization and deoxidation of Cu-S-O alloy in induction melting and solidification under argon and their rates of elimination in vacuum induction melting

   • Reiichi Ohno

   OriginalPaper Pages: 405 - 416

3. The mass transfer kinetics of niobium solution into liquid steel

   • Stavros A. Argyropoulos
   • Panagiotis G. Sismanis

   OriginalPaper Pages: 417 - 427

4. Role of near-wall node location on the prediction of melt flow and residence time distribution in tundishes by mathematical modeling

   • S. Chakraborty
   • Y. Sahai

   OriginalPaper Pages: 429 - 437

5. Mixing characteristics of a submerged jet measured using an isokinetic sampling probe

   • K. Ito
   • S. Kobayashi
   • M. Tokuda

   OriginalPaper Pages: 439 - 445

6. Kinetics of removal of bismuth and lead from molten copper alloys in vacuum induction melting

   • Reiichi Ohno

   OriginalPaper Pages: 447 - 465

7. An ultrasonic method for reconstructing the two-dimensional liquid-solid interface in solidifying bodies

   • F. A. Mauer
   • S. J. Norton
   • H. N. G. Wadley

   OriginalPaper Pages: 467 - 473

8. Activities of chromium in molten copper at dilute concentrations by solid-state electrochemical cell

   • T. K. Inouye
   • H. Fujiwara
   • M. Iwase

   OriginalPaper Pages: 475 - 480

9. Slag foaming in bath smelting

   • R. Jiang
   • R. J. Fruehan

   OriginalPaper Pages: 481 - 489

10. Representation of the solubility of lead chloride in various chloride solutions with Pitzer’s model

    • A. Mgaidi
    • W. Fürst
    • H. Renon

    OriginalPaper Pages: 491 - 498

11. Thermodynamic behavior of phosphorus in CaO-CaF₂-SiO₂ and CaO-Na₂O-SiO₂ systems

    • Atsuko Tagaya
    • Hiroyuki Chiba
    • Nobuo Sano

    OriginalPaper Pages: 499 - 502

12. The influence of specific impurities on the nucleation and growth of magnetite during reduction of artificially prepared hematite

    • R. Chaigneau
    • R. H. Heerema

    OriginalPaper Pages: 503 - 511

13. Modeling and parametric studies of heat transfer in a direct-fired continuous reheating furnace

    • K. s. Chapman
    • S. Ramadhyani
    • R. Viskanta

    OriginalPaper Pages: 513 - 521

14. On the kinetics of diffusion-limited layer growth in solid-solid systems

    • Richard S. Larson

    OriginalPaper Pages: 523 - 527

15. Numerical simulation of a solidifying Pb-Sn alloy: The effects of cooling rate on thermosolutal convection and macrosegregation

    • P. J. Prescott
    • F. P. Incropera

    OriginalPaper Pages: 529 - 540

16. Knowledge-based simulation and identification of various metallurgical reactors

    • M. A. Reuter
    • J. S. J. Van Deventer

    OriginalPaper Pages: 541 - 555

17. Effect of temperature and composition on surface tension in Fe-Ni-Cr alloys containing sulfur

    • M. J. McNallan
    • T. Debroy

    Communications Pages: 557 - 560

18. Chemical vapor deposition kinetics of tungsten from WCl₆ onto nickel plate at elevated temperatures

    • B. S. Chun
    • C. W. Won
    • H. Y. Sohn

    Communications Pages: 560 - 563