Modulated structure and magnetic properties of age-hardenable Fe-Mn-Al-C alloys Kazunori SatoKazuhiro TagawaYasunobu Inoue OriginalPaper Pages: 5 - 11
A mössbauer study of zinc-iron intermediate phases and electrodeposited coatings Mingyuan GuG. W. SimmonsA. R. Marder OriginalPaper Pages: 273 - 277
The tempering of iron-nitrogen martensite; Dilatometric and calorimetric analysis Liu ChengE. J. Mittemeijer OriginalPaper Pages: 13 - 26
Preferred orientations in extruded nickel and iron aluminides P. S. KhadkikarG. M. MichalK. Vedula OriginalPaper Pages: 279 - 288
The physics of mechanical alloying: A first report D. R. MauriceT. H. Courtney OriginalPaper Pages: 289 - 303
Lithium diffusion in aluminum-lithium alloy 2090 clad with 7072 J. M. PapazianR. L. Schulte OriginalPaper Pages: 39 - 43
Analysis of early-stage sintering with simultaneous surface and volume diffusions James C. Wang OriginalPaper Pages: 305 - 312
Fluid dynamics of a stationary weld pool Natarajan RamananSeppo A. Korpela OriginalPaper Pages: 45 - 57
Fracture behavior of C-Mn steel and weld metal in notched and precracked specimens: Part I. fracture behavior J. H. ChenH. MaG. Z. Wang OriginalPaper Pages: 313 - 320
Modeling of collision and coalescence of droplets during microgravity processing of Zn-Bi immiscible alloys J. R. RogersR. H. Davis OriginalPaper Pages: 59 - 68
Fracture behavior of C-Mn steel and weld metal in notched and precracked specimens: Part II. micromechanism of fracture J. H. ChenG. Z. WangH. Ma OriginalPaper Pages: 321 - 330
Crack-tip behaviors of stationary and growing cracks in Al-Fe-X alloys: Part I. Near-tip strain field Kwai S. Chan OriginalPaper Pages: 69 - 80
Measurement and prediction of plastic anisotropy in deep-drawing steels D. DanielJ. J. Jonas OriginalPaper Pages: 331 - 343
Crack-tip behaviors of stationary and growing cracks in Al-Fe-X alloys: Part II. Crack opening profile Kwai S. Chan OriginalPaper Pages: 81 - 86
On the scatter in creep rupture times J. P. FarrisJ. D. LeeT. J. Delph OriginalPaper Pages: 345 - 352
High-temperature deformation mechanisms and constitutive equations for the oxide dispersion-strengthened superalloy MA 956 M. HaghiL. Anand OriginalPaper Pages: 353 - 364
The influence of oxygen on the structure, fracture, and fatigue crack propagation behavior of Ti-8.6 Wt Pct Al G. T. GrayG. LuetjeringJ. C. Williams OriginalPaper Pages: 95 - 105
Internal hydrogen effects on tensile properties of iron- and nickel-base superalloys P. D. HicksC. J. Altstetter OriginalPaper Pages: 365 - 372
Temperature and orientation dependence of the deformation and fracture in boron-doped Ni76Al19Ti5 single crystals M. S. KimS. HanadaO. Izumi OriginalPaper Pages: 107 - 115
Acoustic emission during deformation of dual-phase steels Q. Y. LongYin Huazi OriginalPaper Pages: 373 - 379
A study of void nucleation, growth, and coalescence in spheroidized 1518 steel D. KwonR. J. Asaro OriginalPaper Pages: 117 - 134
Influence of molybdenum on the creep properties of nickel-base superalloy single crystals R. A. MacKayM. V. NathalD. D. Pearson OriginalPaper Pages: 381 - 388
Influence of test parameters on the thermal-mechanical fatigue behavior of a superalloy J. L. MalpertuL. Rémy OriginalPaper Pages: 389 - 399
Microstructure, deformation, and fracture characteristics of an Al67Pd8Ti25 intermetallic alloy W. O. PowersJ. A. Wert OriginalPaper Pages: 145 - 151
Tensile properties of short fiber-reinforced SiC/Ai composites: Part I. effects of matrix precipitates J. M. PapazianP. N. Adler OriginalPaper Pages: 401 - 410
Laboratory simulation of seamless tube piercing and rolling using dynamic recrystallization schedules L. N. PussegodaS. YueJ. J. Jonas OriginalPaper Pages: 153 - 164
Tensile properties of short fiber-reinforced SiC/Al composites: Part II. Finite-element analysis A. LevyJ. M. Papazian OriginalPaper Pages: 411 - 420
Development of an aluminum sheet alloy with improved formability Anil K. Sachdev OriginalPaper Pages: 165 - 175
Mechanical properties and microstructures of Al-Mg-Sc alloys Ralph R. SawtellCraig L. Jensen OriginalPaper Pages: 421 - 430
Fatigue and creep crack growth in oxide dispersion strengthened INCONEL MA-754 P. ShahinianK. Sadananda OriginalPaper Pages: 177 - 187
High strain-rate-induced cleavage fracture in mild carbon steel Anna K. ZurekPaul S. FollansbeeJohn Hack OriginalPaper Pages: 431 - 439
Development and relaxation of stress in surface layers; Composition and residual stress profiles in γ′-Fe4N1−x layers on α-Fe substrates M. A. J. SomersE. J. Mittemeijer OriginalPaper Pages: 189 - 204
Identification of thermodynamically stable ceramic reinforcement materials for iron aluminide matrices Ajay K. Misra OriginalPaper Pages: 441 - 446
Solidification and microstructure analysis of rapidly solidified melt-spun Al-Fe alloys M. G. ChuD. A. Granger OriginalPaper Pages: 205 - 212
Application of the quasi-subsubregular solution model: The iron-carbon system Mark E. Schlesinger OriginalPaper Pages: 447 - 453
Interaction of Al2O3-ZrO2 fibers with a Ti-Al matrix during pressure casting S. NourbakhshF. L. LiangH. Margolin OriginalPaper Pages: 213 - 219
Role of heat treatment and cathodic charging conditions on the hydrogen embrittlement of HP 7075 aluminum alloy J. CheneI. M. BernsteinA. W. Thompson OriginalPaper Pages: 455 - 464
Dendritic solidification of magnesium alloy AZ91 K. PettersenO. LohneN. Ryum OriginalPaper Pages: 221 - 230
Hydrogen-Assisted ductile fracture in spheroidized 1520 Steel: Part I. axisymmetric tension In-Gyu ParkAnthony W. Thompson OriginalPaper Pages: 465 - 477
The influence of buoyant forces and volume fraction of particles on the particle pushing/entrapment transition during directional solidification of Al/SiC and Al/graphite composites Doru M. StefanescuAvijit MoitraBrij K. Dhindaw OriginalPaper Pages: 231 - 239
A comparison of the solidification behavior of INCOLOY 909 and INCONEL 718 M. J. CieslakT. J. HeadleyT. Kollie OriginalPaper Pages: 479 - 488
Influence of low-gravity solidification on heterogeneous nucleation in stable iron-carbon alloys Huameng TianDoru M. StefanescuPeter A. Curreri OriginalPaper Pages: 241 - 252
Modeling stress development during the solidification of gray iron castings Jeffrey W. WieseJonathan A. Dantzig OriginalPaper Pages: 489 - 497
Stereoscopic presentation of rodrigues vector representation of the full three-dimensional disorientation of iron crystals by rolling K. H. G. AshbeeJ. P. Sargent Communications Pages: 253 - 255
Fatigue crack propagation in a rapidly solidified AI-12.4Fe-1.2V-2.3Si alloy H. H. SmithD. J. Michel Communication Pages: 499 - 500
Discussion of “comments on the solubility of carbon in molten aluminum” R. C. Dorward Communication Pages: 255 - 257