1. Advances towards development of industrially relevant short natural fiber reinforced and hybridized polypropylene composites for various industrial applications: a review

   • Atul Kumar Maurya
   • Gaurav Manik

   Review paper 03 January 2023 Article: 47

   

2. Molecular simulation of structural properties of polymer blend nanofilms

   • Kanjana Sirirak
   • Visit Vao-soongnern

   Original Paper 03 January 2023 Article: 46

   

3. Preparation of covalent triazine-based polyamides for copper (II) ions removal from aqueous solutions

   • Haniyeh Farrokhi
   • Massoumeh Bagheri

   Original Paper 03 January 2023 Article: 45

   

4. Excellent mechanical and chemical resistance properties exhibited by bamboo fiber reinforced poly(lactic acid) - epoxy composites

   • Prasanta Baishya
   • Siddharth Mohan Bhasney
   • Vimal Katiyar

   Original Paper 02 January 2023 Article: 44

   

5. Electric and electronic equipment waste: reuse in elastomeric composites

   • Ramona Marina Grigorescu
   • Paul Ghioca
   • Elvira Alexandrescu

   Original Paper 31 December 2022 Article: 43

   

6. Synthesis of network polymers by ring-opening addition reaction of multi-functional epoxy and dithiol compounds

   • Naofumi Naga
   • Yuto Hosoi
   • Tamaki Nakano

   Original Paper 30 December 2022 Article: 42

   

7. Tamarind/β-CD-g-poly (MAA) pH responsive hydrogels for controlled delivery of Capecitabine: fabrication, characterization, toxicological and pharmacokinetic evaluation

   • Umaira Rehman
   • Rai Muhammad Sarfraz
   • Yacine Benguerba

   Original Paper 29 December 2022 Article: 41

   

8. Facile fabrication of F-POSS star polymer coated superhydrophobic cotton fabric by successive metal-free PET-RAFT and thiol–ene click chemistry for efficient oil/water separation

   • Xiaowu Jiang
   • Bingbing Zhao
   • Lingli Ni

   Original Paper 28 December 2022 Article: 40

   

9. Effects of Urushi and Sumi ink on the mechanical properties and water repellency of Washi paper

   • Chieko Narita
   • Kazushi Yamada

   Original Paper 28 December 2022 Article: 39

   

10. Polyurethane/MoS₂ composites: gas barrier, hygrothermal aging and recycling

    • Yanqiu Huo
    • Changhong Lin
    • Vladimir Levchenko

    Original Paper 27 December 2022 Article: 38

    

11. Janus porous membranes with asymmetric wettability and self-floating properties for solar desalination

    • Ying Guo
    • Ying Wan
    • Yiqun Liu

    Original Paper 27 December 2022 Article: 37

    

12. Mullins effect in polymer large deformation strain gauges

    • Alexander P. Kondratov
    • Anastasiya V. Lozitskaya
    • Alex A. Volinsky

    Original Paper 26 December 2022 Article: 36

    

13. Pectin-based inks development for 3D bioprinting of scaffolds

    • Verónica E. Passamai
    • Sergio Katz
    • Guillermo R. Castro

    Original Paper 26 December 2022 Article: 35

    

14. The effects of crosslinker ratio and photoinitiator type on the properties of pnipam hydrogel

    • Nur Oral
    • Guldemet Basal

    Original Paper 24 December 2022 Article: 34

    

15. Compatibility between aliphatic polyketone terpolymer and Nylon6 polymer blend

    • Younggon Son
    • Shichoon Lee

    Original Paper 24 December 2022 Article: 33

    

16. Highly efficient phosphorous-containing flame retardant for transparent epoxy resin with good mechanical properties

    • Qi Chen
    • Song Wang
    • Ailing Zhang

    Original Paper 23 December 2022 Article: 32

    

17. Syndiospecific polymerization of styrene by half-metallocene with a naphthoxy group ligand

    • Shuzhang Qu
    • Haokun Li
    • Wei Wang

    Original Paper 21 December 2022 Article: 31

    

18. Superior fatigue and mechanical properties of ethylene-propylene diene monomer rubber incorporated with Zr-based metal–organic framework

    • Babak Abdi
    • Akbar Shojaei
    • Hossein Molavi

    Original Paper 21 December 2022 Article: 30

    

19. Tribological behavior of graphene oxide filled melt-processable polytetrafluoroethylene/perfluoroethylene-propylene copolymer blends

    • Siqi Tang
    • Xiaotao Qiu
    • Zili Yu

    Original Paper 20 December 2022 Article: 29

    

20. Phenyl-bridged bis-salicylaldiminato binuclear titanium complexes for ethylene (co)polymerization

    • Mengyuan Xue
    • Yani Luo
    • Guangyong Xie

    Original Paper 20 December 2022 Article: 28

    

21. Facile synthesis of 2,6-di-tert-butylphenol modified polystyrene and its antioxidative properties as the heterogeneous antioxidant

    • Yuli Fu
    • Yiwen Cao
    • Jianhan Huang

    Original Paper 20 December 2022 Article: 27

    

22. Effect of the aqueous-organic solvent mixtures upon super-aggregation of chitosan

    • Piyali Mandal
    • Madhumita Mukherjee
    • Raja Shunmugam

    Original Paper 17 December 2022 Article: 26

    

23. Component ratio effects of melamine cyanurate and aluminum diethylphosphinate in flame retardant TPU

    • Fenghao Hao
    • Yajun Chen
    • Lijun Qian

    Original Paper 16 December 2022 Article: 25

    

24. Evaluation of the suitability of different methods for determination of the crosslink density in highly filled EPDM compounds

    • Vanessa Spanheimer
    • Danka Katrakova-Krüger
    • Kroum Valtchev

    Original paper Open access 15 December 2022 Article: 24

    

25. Biodegradable thermoplastic natural rubber based on natural rubber and thermoplastic starch blends

    • Skulrat Pichaiyut
    • Chalermphong Uttaro
    • Charoen Nakason

    Original Paper 15 December 2022 Article: 23

    

26. Synthesis and characterization of poly[poly(ethylene glycol) methacrylate]-graft-poly(2-vinylpyridine) comb-type graft copolymer using the "grafting through" by free radical polymerization and atom transfer radical polymerization

    • Ergül Meyvacı

    Original Paper 14 December 2022 Article: 22

    

27. Influence of mechanical blending method and consolidation temperature on electrical properties of the prepared graphene nanoplatelet/UHMWPE composite

    • José Antonio Puértolas
    • María José Martínez-Morlanes
    • Takahiro Morimoto

    Original Paper 13 December 2022 Article: 21

    

28. The role of calcium crosslinking and glycerol plasticizing on the physical and mechanical properties of superabsorbent

    • Amir Abbas Abedini
    • Gholamreza Pircheraghi
    • Alireza Kaviani

    Original Paper 13 December 2022 Article: 20

    

29. Greener rigid polyurethane nanocomposite foams: investigation of physico-mechanical properties formulated with eco-friendly blowing agents

    • Sakti Ranjan Acharya
    • Akshaya Kumar Palai
    • Smita Mohanty

    Original Paper 12 December 2022 Article: 19

    

30. Synthesis and characterization of novel bio-based polyesters and poly(ester amide)s based on isosorbide and symmetrical cyclic anhydrides

    • Ban H. Al-Tayyem
    • Bassam A. Sweileh

    Original Paper 12 December 2022 Article: 18

    

31. Fire behavior and transparent properties of polyvinyl chloride film with different plasticized systems

    • Ling Zhang
    • Tingting Chen
    • Ruidan Chai

    Original Paper 12 December 2022 Article: 17

    

32. Investigation of thermo-oxidative aging of silicone-based adhesives: substantiating separability between environmental and mechanical damages

    • Sharif Alazhary
    • Mamoon Shaafaey
    • Roozbeh Dargazany

    Original Paper 09 December 2022 Article: 16

    

33. Effects of blend phase ratio upon thermomechanical, viscoelastic relaxation and strain recovery behavior of crosslinked LDPE/EVA foams

    • Pouya Katbab
    • Narges Asghari
    • Seyed Hassan Jafari

    Original Paper 09 December 2022 Article: 15

    

34. Development of surface conjugated block co polymeric micelles as targeted therapeutics: characterization and in-vitro cell viability

    • Shruti Patel
    • Viral Patel
    • Asha Patel

    Original Paper 09 December 2022 Article: 14

    

35. A review on the micro-encapsulation of phase change materials: classification, study of synthesis technique and their applications

    • Neeraj P. Pasarkar
    • Mukesh Yadav
    • Prakash. A. Mahanwar

    Review paper 08 December 2022 Article: 13

    

36. Effect of the aramid pulp on the physicochemical, viscoelastic properties and rheokinetics of polyurethanes

    • Joziel A. Cruz
    • Sandro C. Amico
    • Otávio Bianchi

    Original Paper 08 December 2022 Article: 12

    

37. Manipulation of crystallization and dielectric relaxation dynamics via hot pressing and copolymerization of PVDF with Hexafluoropropylene

    • G. Hassnain Jaffari
    • M. Shahid Iqbal Khan
    • Nawazish Ali Khan

    Original Paper 06 December 2022 Article: 11

    

38. Melt rheology analysis through experimental and constitutional mechanical models of exfoliated graphene based polylactic acid (PLA) nanocomposites

    • Gourhari Chakraborty
    • Sayan Bhattacharjee
    • G. Pugazhenthi

    Original Paper 05 December 2022 Article: 10

    

39. Comparative experiments on amine vs. acid anhydride curing agents for epoxy resin required for automotive parts

    • Manseok Yoon
    • Choong-Sun Lim

    Original Paper 05 December 2022 Article: 9

    

40. Synergetic photodegradation via inorganic–organic hybridization strategies: a review on preparations and applications of nanoparticle-hybridized polyaniline photocatalysts

    • Ying Fan
    • Zhengkun Bai
    • Yunqian Zhang

    Review Paper 02 December 2022 Article: 8

    

41. Effect of calcium stearate and a fluoroelastomer on the flowability of UHMWPE/HDPE composites and the underlying mechanism

    • Chunlin Ye
    • Zhipeng Liu
    • Shicheng Zhao

    Original Paper 02 December 2022 Article: 7

    

42. Development of polymer electrolyte membrane based on poly(Vinyl Chloride)/graphene oxide modified with zirconium phosphate for fuel cell applications

    • Ahmed F. Elerian
    • M. A. Abu-Saied
    • Elsayed M. Elnaggar

    Original Paper Open access 02 December 2022 Article: 6

    

43. Reduced graphene oxide-modified polyvinyl alcohol hydrogel with potential application as skin wound dressings

    • Zahra Khodaee
    • Saeedeh Mazinani
    • Farhad Sharif

    Original Paper 02 December 2022 Article: 5

    

44. Chrysanthemum–like hierarchitectures decorated on polypropylene hernia mesh and their anti-inflammatory effects

    • Yansha Qiao
    • Qian Zhang
    • Lu Wang

    Original Paper 01 December 2022 Article: 4

    

45. Realization of water resistant, durable and self-cleaning on oriented cellulose nanocomposite packaging films

    • Fang Ren
    • Tong Wu
    • Penggang Ren

    Original Paper 01 December 2022 Article: 3

    

46. Dewetting behavior of the spin-coated bilayer films of block copolymer and random copolymer induced by solvent vapor annealing

    • Wang Zhang
    • Gangyao Wen

    Original Paper 01 December 2022 Article: 2

    

47. Fire-retardant and electrocatalytic performance of N, P-graphene fiber nonwoven fabrics

    • Bin Chen
    • Jiangli Xue
    • Yongsheng Liu

    Original Paper 01 December 2022 Article: 1