Abstract
The development of environmentally friendly natural fiber composite materials is desirable. In this study, Urushi (oriental lacquer), which is a natural paint, and Sumi ink (black ink), which is a natural ink, were applied to Washi (Japanese paper), and their effect on the functional properties (appearance, mechanical properties, and water repellency) of the coated Washi were evaluated. Coating the Washi specimens with Urushi significantly improved their water repellency and tensile strength compared to those of untreated Washi. This was because Urushi filled the gaps between the fibers; however, it also caused brittle fracture. In addition, the elongation at break and water repellency were improved when Washi was coated with Sumi ink compared with those of untreated Washi. Furthermore, Washi specimens coated with Sumi ink followed by Urushi exhibited filled gaps between the fibers, a smoother surface, and lower water repellency compared to Washi directly coated with Urushi. The brittle fracture occurred from the Sumi–Washi fiber interface.
Similar content being viewed by others
References
Narita C, Okahisa Y, Yamada K (2019) J Clean Prod 234:200
Kyutoku H, Maeda N, Sakamoto H, Nishimura H, Yamada K (2019) Carbohydr Polym 203:95
Vigneshwaran S, Sundarakannan R, John KM, Joel Johnson RD, Prasath KA, Ajith S, Arumugaprabu V, Uthayakumar M (2020) J Clean Prod 277
Matsumoto N (2018) Open Archaeol 4:206
Noshiro S, Kudo Y, Sasaski Y (2016) Quat Int 426:175
Lu R, Honda T, Kamiya Y, Yoshida K, Miyakoshi T (2013) J Anal Appl Pyrolysis 103:68
Kumanotani J (1995) Prog Org Coat 26:163
Lee H, Han H, Kim D, Lee B, Cho JH, Lee Y, Lee S-S, Lim JA (2021) Prog Org Coat 154
Narita C, Shimode Y, Yamada K (2016) Prog Org Coat 101:379
Watanabe H, Fujimoto A, Takahara A (2013) J Polym Sci Part A: Polym Chem 51:3688
Yang J, Deng J, Zhu J, Liu W, Zhou M, Li D (2016) Prog Org Coat 94:41
Narita C, Okahisa Y, Yamada K (2019) Polymer 161:49
O’Shea C, Fenn M, Gillis KZ, Khanjian H, Schilling M (2021) Studies in Conservation 1
Nakagawa R, Nakai Si, Miyakoshi T, Honda T (2019) J Archaeol Sci Rep 25:72
Watanabe H, Fujimoto A, Takahara A (2015) Langmuir 31:2360
Biron C, Le Bourdon G, Perez-Arantegui J, Servant L, Chapoulie R, Daniel F (2018) Anal Bioanal Chem 410:7043
Battistel D, Padovani I, Dallo F, Barbante C, Zendri E, Balliana E (2018) J Cult Heritage 33:18
Inaba M, Hasegawa S, Handa M, Enomae T, Takashima A, Han Z, Someya S (2019) Jp Tappi J 73:567
Łątka JF, Jasiołek A, Karolak A, Niewiadomski P, Noszczyk P, Klimek A, Zielińska S, Misiurka S, Jezierska D (2022) J Build Eng 50
Tamburini D, Sardi D, Spepi A, Duce C, Tinè MR, Colombini MP, Bonaduce I (2016) Polym Degrad Stab 134:251
Narita C, Yamada K, Tsujii T (2017) Mater Chem Phys 199:387
Narita C, Yamada K (2017) Prog Org Coat 105:183
Jung J, Cho HJ, Kim D, Hwang SS, Won J (2018) ChemistrySelect 3:6665
Tavares AP, Rodriguez O, Fernandez-Fernandez M, Dominguez A, Moldes D, Sanroman MA, Macedo EA (2013) Bioresour Technol 131:405
Kim YJ, Nicell JA (2006) Bioresour Technol 97:1431
Roy JJ, Abraham TE (2006) J Mol Catal B: Enzym 38:31
Chougule SM, Twinkle A, Thomas R, Balachandran M (2022) Polym Polym Compos 30
Lluveras-Tenorio A, Spepi A, Pieraccioni M, Legnaioli S, Lorenzetti G, Palleschi V, Vendrell M, Colombini MP, Tinè MR, Duce C, Bonaduce I (2019) J Therm Anal Calorim 138:3287
Ko M, Jung J, Hwang SS, Won J (2020) Polymer 205
Thomas R, Jayaseeli E, Sharma NMS, Manoj B (2018) Results in Physics 10:633
Liu CF, Xu F, Sun JX, Ren JL, Curling S, Sun RC, Fowler P, Baird MS (2006) Carbohydr Res 341:2677
Vahur S, Eero L, Lehtaru J, Virro K, Leito I (2019) Anal Bioanal Chem 411:5127
Khwaldia K, Arab-Tehrany E, Desobry S (2010) Compr Rev Food Sci Food Saf 9:82
Liukkonen A (1997) Scanning 19:411
Cheng M, Deng J, Yang F, Gong Y, Zhao N, Zhang X (2003) Biomaterials 24:2871
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflicts of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Narita, C., Yamada, K. Effects of Urushi and Sumi ink on the mechanical properties and water repellency of Washi paper. J Polym Res 30, 39 (2023). https://doi.org/10.1007/s10965-022-03416-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-022-03416-5