Articles

1. On the influence of local deformation on structural dynamic models of bolted lap joints

   • Stefan Wischmann
   • Georg Jacobs
   • Gregor Höpfner

   Originalarbeiten/Originals Open access 26 April 2024 Article: 14

   

2. Modeling and analysis of the synchronization process of synchronizer

   • Panming Chen
   • Hua Ding
   • Jingyan Zhao

   Originalarbeiten/Originals 24 April 2024 Article: 13

   

3. Untersuchung verschiedener Vergleichsspannungshypothesen im Kontext der Dauerfestigkeit einsatzgehärteter Wellen

   • Jakob Pogert
   • Lukáš Suchý
   • Alexander Hasse

   Originalarbeiten/Originals Open access 04 April 2024 Article: 12

   

4. Development of a workflow to build optimal machine learning models for stress concentration factor regression

   • Paul Tunsch
   • Nils Becker
   • Berthold Schlecht

   Originalarbeiten/Originals Open access 03 April 2024 Article: 11

   

5. Bahnkorrektur auf Ellipsenbahnen

   • Werner Eidel

   Originalarbeiten/Originals 28 March 2024 Article: 10

   

6. Flank fractures on spiral bevel gears—transfer of analytical methods for the estimation of residual stresses from cylindrical gears to bevel gears

   • Thi Tra My Truong
   • Carsten Ulrich
   • Berthold Schlecht

   Originalarbeiten/Originals Open access 28 March 2024 Article: 9

   

7. Spiral bevel gears tooth geometry based on tooth trace and contact ellipse theory

   • Sadek Kobzili
   • Yacine Benabid
   • Akram Riani

   Originalarbeiten/Originals 25 March 2024 Article: 8

   

8. Numerical and experimental investigations on the vibration behavior of a high-speed planetary gearbox

   • D. Schweigert
   • B. Morhard
   • K. Stahl

   Originalarbeiten/Originals Open access 25 March 2024 Article: 7

   

9. Systematische Simulationsstudie zur verformungsmechanischen Stützwirkung an Wellen aus Stahl

   • Carsten Ulrich
   • Hans Härtel
   • Berthold Schlecht

   Originalarbeiten/Originals Open access 21 March 2024 Article: 6

   

10. Locally resolved stress measurement in the ultra-hard composites polycrystalline diamond and polycrystalline cubic boron nitride

    • Bernd Breidenstein
    • Nils Vogel

    Originalarbeiten/Originals Open access 11 March 2024 Article: 5

    

11. Untersuchung und Simulation des Temperatureinflusses auf das Anregungsverhalten von Kunststoffzahnrädern

    • Christian Namhoff
    • Jens Brimmers
    • Christian Brecher

    Übersichtsarbeiten/Review articles Open access 09 February 2024 Article: 4

    

12. Study on the engagement characteristics of wet multi-plate friction clutch based on separating spring

    • Haipeng Wang
    • Chu Zhu
    • Rupeng Zhu

    Originalarbeiten/Originals 06 February 2024 Article: 3

    

13. Theoretical study on measuring steam dryness using matrix conductivity method in steam injection pipelines

    • Lei Zeng
    • Yongfei Yan
    • Yuxuan Qi

    Originalarbeiten/Originals 24 January 2024 Article: 2

    

14. Spur gear teeth reconstruction via direct laser deposition

    • P. C. Romio
    • P. M. T. Marques
    • J. M. Cruz

    Originalarbeiten/Originals 08 January 2024 Article: 1

    

15. Evaluation of friction calculation methods for rolling bearings

    • M. Zander
    • M. Otto
    • K. Stahl

    Originalarbeiten/Originals Open access 18 October 2023 Pages: 1307 - 1316

    

16. A non-restrictive approach of gear geometry calculation for plastic gears

    • Florian Eigner
    • Stephan Oberle
    • Maik Berger

    Originalarbeiten/Originals Open access 29 September 2023 Pages: 1095 - 1102

    

17. Parameter assessment for reliability modeling of machine components using heuristic screening

    • Marco Arndt
    • Martin Dazer
    • Bernd Bertsche

    Übersichtsarbeiten/Review articles Open access 25 September 2023 Pages: 1347 - 1370

    

18. Foreword “Best of Gears 2023”

    • Karsten Stahl

    Vorwort 14 September 2023 Pages: 777 - 777

19. Influence of axis misalignments in stepped planetary gear stages on the excitation behavior—test rig development and simulative analysis

    • Christian Westphal
    • Jens Brimmers
    • Christian Brecher

    Originalarbeiten/Originals Open access 13 September 2023 Pages: 1103 - 1116

    

20. Improvement of the transmission efficiency in electric vehicles by using double staggered helical gears with shortened teeth

    • Ignacio Gonzalez-Perez
    • Alfonso Fuentes-Aznar

    Originalarbeiten/Originals Open access 13 September 2023 Pages: 1081 - 1094

    

21. Experimental investigation of moving contact pattern in helical planetary gearboxes

    • Marius Fürst
    • Sebastian Sepp
    • Karsten Stahl

    Originalarbeiten/Originals Open access 05 September 2023 Pages: 1129 - 1136

    

22. Fluid-mechanical evaluation of different clutch geometries based on experimental and numerical investigations

    • Christian Sax
    • Alexander Stroh
    • Jochen Kriegseis

    Originalarbeiten/Originals Open access 05 September 2023 Pages: 1297 - 1306

    

23. Transient thermal model of a planetary gear set based on a uniform temperature approach

    • Wassim Ramdane
    • Christophe Changenet
    • Pierre Casanova

    Originalarbeiten/Originals 04 September 2023 Pages: 1117 - 1127

    

24. The effects of using different thermal storage materials and their mixtures on the performance of a solar cooker

    • Syed Aun Ali Rizvi
    • Muhammad Uzair
    • Mubashir Ali Siddiqui

    Originalarbeiten/Originals 04 September 2023 Pages: 1285 - 1295

    

25. Erratum to: Transient thermal model of a planetary gear set based on a uniform temperature approach

    • Wassim Ramdane
    • Christophe Changenet
    • Pierre Casanova

    Erratum 12 October 2023 Pages: 1193 - 1193

26. Review of different calculation approaches for the mean coefficient of friction in ISO 6336

    • Niklas Blech
    • Constantin Paschold
    • Karsten Stahl

    Originalarbeiten/Originals Open access 04 October 2023 Pages: 1169 - 1179

    

27. Investigation of friction and scuffing during loss of lubrication on a high velocity twin-disc test rig

    • Ulrike Cihak-Bayr
    • Thomas Wopelka
    • Christoph Wintersteiger

    Originalarbeiten/Originals Open access 10 October 2023 Pages: 1151 - 1167

    

28. Testing and modelling of a 2.5 MW wind turbine gearbox: Influence of lubricant formulation

    • Carlos M. C. G. Fernandes
    • Rui Ferreira
    • Ricardo Bernardes

    Originalarbeiten/Originals Open access 10 October 2023 Pages: 1137 - 1149

    

29. Solar radiation assessment by the Gueymard daily integration (DI) model for the eastern Mediterranean region (EMR) of Algeria:

    • Fethi Bennour
    • Hocine Mzad

    Originalarbeiten/Originals 01 September 2023 Pages: 1271 - 1284

    

30. A concept for comparison of new and aged lubricants in transmissions of electric vehicles and a method of oil aging on a test rig

    • Timo König
    • Luca Cadau
    • Markus Kley

    Originalarbeiten/Originals Open access 31 August 2023 Pages: 1069 - 1080

    

31. Crack growth based tooth root life prediction model—an influence quantity analysis

    • Johannes Lövenich
    • Moritz Zalfen
    • Christian Brecher

    Originalarbeiten/Originals Open access 29 August 2023 Pages: 1057 - 1067

    

32. Design and analysis of compound stepped planetary gear drives for better transmission performances

    • Shyi-Jeng Tsai
    • Qi-You Zhuang

    Originalarbeiten/Originals 23 August 2023 Pages: 1037 - 1056

    

33. Latest advancements in the lubricant simulations of geared systems: a technology ready for industrial applications

    • Franco Concli
    • Marco N. Mastrone

    Übersichtsarbeiten/Review articles Open access 22 August 2023 Pages: 1181 - 1191

    

34. On the reduction of windage power losses in gears by the modification of tooth geometry

    • M. Ruzek
    • R. Brun
    • P. Velex

    Originalarbeiten/Originals 22 August 2023 Pages: 1029 - 1036

    

35. Potentials and challenges in enhancing the gear transmission development with machine learning methods—a review

    • Stefan Sendlbeck
    • Matthias Maurer
    • Karsten Stahl

    Übersichtsarbeiten/Review articles Open access 22 August 2023 Pages: 1333 - 1346

    

36. Effect of bending and contact load behavior on non-standard internal spur gear set

    • R. Prabhu Sekar
    • R. Ravivarman

    Originalarbeiten/Originals 22 August 2023 Pages: 1249 - 1267

    

37. Cross-correlation analysis among tooth profile and helix deviations

    • Daisuke Yamazaki
    • Daisuke Iba
    • Ichiro Moriwaki

    Originalarbeiten/Originals 11 August 2023 Pages: 1009 - 1017

    

38. Comparing the contact characteristics of involute gear/eccentric cycloidal gear calculated by various loaded tooth contact analysis models

    • Ling-Chiao Chang
    • Jonas-Frederick Hochrein
    • Karsten Stahl

    Originalarbeiten/Originals 11 August 2023 Pages: 973 - 986

    

39. Applicability of classic analytical calculation approaches for the design of plastic gears

    • Markus Rothemund
    • Michael Otto
    • Karsten Stahl

    Originalarbeiten/Originals Open access 08 August 2023 Pages: 987 - 995

    

40. Calculation method for wear of steel-bronze rolling-sliding contacts relating to worm gears

    • Philipp E. Schnetzer
    • Josef Pellkofer
    • Karsten Stahl

    Originalarbeiten/Originals Open access 08 August 2023 Pages: 961 - 971

    

41. Crossed helical gears—simulative studies and experimental results on non-involute geometries

    • Linda Becker
    • Peter Tenberge

    Originalarbeiten/Originals Open access 07 August 2023 Pages: 949 - 959

    

42. Exploration of trade-offs between NVH and efficiency in bevel gear design

    • Eugeniu Grabovic
    • Alessio Artoni
    • Enrico Ciulli

    Originalarbeiten/Originals Open access 07 August 2023 Pages: 933 - 947

    

43. Neue Berechnungsmethode für die Bestimmung auftretender Zahnfußspannungen in evolventischen flankenzentrierten Zahnwellenverbindungen

    • Christian Spura
    • Klaus Pantke

    Originalarbeiten/Originals Open access 03 August 2023 Pages: 1231 - 1247

    

44. Investigation of sound and vibration behavior of cylindrical gears

    • A. Beinstingel
    • F. Haringer
    • S. Marburg

    Originalarbeiten/Originals Open access 31 July 2023 Pages: 1019 - 1027

    

45. Gear skiving with minimum twist errors

    • Andreas Hilligardt
    • Volker Schulze

    Originalarbeiten/Originals Open access 26 July 2023 Pages: 997 - 1007

    

46. Transferability of the scuffing load capacity of gear oils determined on spur gears to hypoid gears

    • Alexander Drechsel
    • Josef Pellkofer
    • Karsten Stahl

    Originalarbeiten/Originals Open access 26 July 2023 Pages: 923 - 932

    

47. Discussion of a variant of eccentric drives utilizing rolling elements

    • S. Fritsch
    • S. Landler
    • K. Stahl

    Originalarbeiten/Originals Open access 26 July 2023 Pages: 1221 - 1230

    

48. An efficient way to calculate contact pattern movement coefficients

    • Andreas Fingerle
    • Michael Otto
    • Karsten Stahl

    Originalarbeiten/Originals Open access 19 July 2023 Pages: 1211 - 1219

    

49. Einsatzverhalten und Verschleiß von PVD-beschichteten und fluid-frei geschmierten Zahnrädern

    • Sebastian Sklenak
    • Dieter Mevissen
    • Andreas Mehner

    Originalarbeiten/Originals Open access 17 July 2023 Pages: 871 - 880

    

50. Acoustical behavior of periodic flank modifications under dynamic operating conditions

    • Sebastian Sepp
    • Alois Wenig
    • Karsten Stahl

    Originalarbeiten/Originals Open access 06 July 2023 Pages: 913 - 922