Abstract
Creep property of high-temperature titanium alloys is one of the most important indexes to evaluate their high-temperature performance. The microstructure of titanium alloy materials plays a decisive role in creep resistance. Coarser the grains are and finer the secondary phase is, better is the creep property. Suitable hot deformation parameters, heat treatment processes and surface treatment techniques can be selected to acquire satisfactory microstructure, which can significantly increase the creep property of high-temperature titanium alloys. Adding alloying elements has a significant effect on the improvement of titanium alloy creep resistance. Alloying elements can change the morphology and phase content of high-temperature titanium alloy, thus affecting its creep property. The development direction of creep property of high-temperature titanium alloys is optimization of the type and content of alloying elements, selection of suitable processing conditions and application of appropriate heat treatment or surface treatment processes.
Similar content being viewed by others
References
Alabort E, Putman D, Reed R C, Acta Mater, 95 (2015) 428.
Ueda K, Nakaoka S, Narushima T, Mater Trans, 54 (2013) 161.
Nochovnaya N A, Khorev A I, Yakovlev A L, Metal Sci Heat Treat, 55 (2013) 415.
Alabort E, Kontis P, Barba D, Dragnevski K, Reed R C, Acta Mater, 105 (2016) 449.
Zheng Z, Study on Thermal Deformation Behavior and Microstructure and Properties of Sheet of High Temperature Titanium Alloy Reinforced by Nano-Y2O3, M.E. Thesis, Harbin Institute of Technology, China (2019).
Wang Q, Liu J, Yang R, J Aeron Mater, 34 (2014) 1
Cheng C, Lei M., Wan Mi., Cai G, Nonferr Metals Sci Eng, 8 (2017) 51.
K Y Z Zhao Y Q, Qu H, Wu H, Zhou L, Zhou Y G, Zeng W, Yu H Q, Mater Sci Eng A, 282 (2000) 153.
LCMC WF, Zhou L, Luo GZ, Mater. Sci. Eng. A, 323 (2002) 192.
Hao M, Cai J, Du J, J Aeron Mater, 23 (2003) 14.
GAO X, Study of Microstructure Evolution of Ti60 Titanium alloy during Controlling of Bimodal Structure, Ph. D Thesis Northwestern Polytechnical University, China (2018).
Zhao Y, Titan Ind Prog, (2001) 33.
Wang S, Huang L J, Geng L, Scarpa F, Jiao Y, Peng H X, Sci Rep, 7 (2017).
Chen Z, Li J, Liu J, Wang Q, Liu J, Yang R, J Mater Sci Technol, 26 (2010) 564.
Barboza M J R, Moura Neto C, Silva C R M, Mater Sci Eng A, 369 (2004) 201.
Barboza M J R, Perez E A C, Medeiros M M, Reis D A P, Nono M C A, Piorino Neto F, Silva C R M, Mater Sci Eng A, 428 (2006) 319.
Oberson P G, Ankem S, Int J Plasticity, 25 (2009) 881.
Zong Y, Liu P, Guo B, Shan D, Mater Sci Eng A, 620 (2015) 172.
Narayana P L, Kim S-W, Hong J-K, Reddy N S, Yeom J-T, Mater Sci Eng A, 718 (2018) 287.
Xiyue W, Zhiyong C, Chao C, Jianrong L, Dongsheng X, Qingjiang W, Chinese J Mater Res, 33 (2019) 785.
Huang C, Zhao Y, Xin S, Zhou W, Li Q, Zeng W, J Alloys Compd, 693 (2017) 582.
Sun H, Zhao J, Liu Y, Zhang Q, Cao J, Huang X, Rare Metal Mater Eng, 48 (2019) 1892.
Zhang C, Effect of Element Y on the Microstructure and Properties of Ti–6Al–2.5Sn–4Zr–0.7Mo–0.3Si Alloy, M.E. Thesis, Harbin Institute of Technology, China (2009).
Guo H, Effects of Yttrium on Microstructure and Prooerties of Cast Ti–6Al–3Sn–3Zr–0.5Mo–0.35Si Alloy, M.E. Thesis, Harbin Institute of Technology, China (2008).
Wang T, Li B, Qiao X, Qi P, Nie Z, Mater Sci Eng A, 731(2018),12.
Yang X, Guo H, Zhao Z, Ning Y, Yuan S, Xin S, International Conference on the Technology of Plasticity, Elsevier Ltd, Hucisko, United kingdom(2017), p 2167.
Han ML, Xu P W, Wan M P, Liang Y L, Du Y P, Liang Y, Rare Metal Mat Eng, 47 (2018) 3768.
Jia W, Zhao H, Hong Q, Li L, Mao X, Mater Charact, 117 (2016) 30.
Wei T, Yu F, Yan Z, Weidong Z, Saifei Z, Zuojun L, Yunrui B, T Mater Heat Treat, 37 (2016) 57.
Kral P, Dvorak J, Zherebtsov S, Salishchev G, Kvapilova M, Sklenicka V, J Mater Sci, 48 (2013) 4789.
Grabovetskaya G P, Zabudchenko O V, Mishin I P, Ratochka I V, Lykova O N, Phys Metals Metall, 120 (2019) 499.
Hosseini R, Morakabati M, Abbasi S M, Hajari A, Mater Sci Eng A, 696 (2017) 155.
Balasundar I, Raghu T, Kashyap B P, Mater Sci Eng A, 609 (2014) 241.
Xiao L, Tian S, Bao X, Chen L, Mater Sci Eng A, 529 (2011) 452.
Xiao L, Tian S, Bao X, Chen L, Mater Sci Eng A, 559 (2013) 401.
Omprakash C M, Satyanarayana D V V, Kumar V, T Indian I Metals, 63 (2010) 457.
Xin S W, Zhao Y Q, Lu Y F, Li Q, Yang H Y, Mater Sci Eng A, 559 (2013) 7.
Ziaja W, Motyka M, Kubiak K, Sieniawski J, Arch Metall Mate, 61 (2016) 683.
Deng T, Li D, Li X, Int J Adv Manuf Tech, 95 (2018) 2105.
Reis A G, Pereira Reis D A, Neto C D M, Ribeiro Barboza M J, Neto F P, Onoro J, J Mater Res Technol, 2 (2013) 48.
Oliveira V M C A, Vazquez A M, Aguiar C, Robin A, Barboza M J R, Mater Sci Eng A, 670 (2016) 357.
de Oliveira V M C A, da Silva M C L, Pinto C G, Suzuki P A, Machado J P B, Chad V M, Barboza M J R, J Mater Res Technol, 4 (2015) 359.
Deng T., Li S., Jiao L, Xin L, Li K, Nonferr Metals Sci Eng, 9(2018) 94.
Deng T, Li S, Liang Y, Sun L, Zhang Y, J Mater Res Technol, 9 (2020) 5676.
Chandravanshi V, Sarkar R, Kamat S V, Nandy T K, Metall Mater Trans A, 44A (2013) 201.
Sen I, Tamirisakandala S, Miracle D, Ramamurty U, Acta Mater, 55 (2007) 4983.
Chen W, Boehlert C J, Metall Mater Trans A, 40 (2009) 1568.
Singh G, Satyanarayana D V V, Pederson R, Datta R, Ramamurty U, Mater Sci Eng A, 597 (2014) 194.
Prasad K, Sarkar R, Ghosal P, Satyanarayana D V V, Kamat S V, Nandy T K, Mater Sci Eng A, 528 (2011) 6733.
E-S M, Mater Charact, 46 (2001) 365.
Jia W, Zeng W, Liu J, Zhou Y, Wang Q, Mater Sci Eng A, 530 (2011) 511.
Zhang W-J, Song X-Y, Hui S-X, Ye W-J, Wang W-Q, Rare Metals, 37 (2018) 1064.
Zhang L-J, Chen Z-Y, Hu Q-M, Yang R, J Alloys Compd, 740 (2018) 156.
Li Y, Chen Y, Liu J-R, Hu Q-M, Yang R, Sci Rep, 6 (2016).
Gao G, Effect of Si,Mo and Y Content on Microstructure and Properties of Ti55 Alloy, MS Thesis, Harbin Institute of Technology, China(2016).
Li S, Chen Z, Wang Z, Liu J, Wang Q, Yang R, Acta Metall Sinica, 49 (2013) 464.
Yang Y F, Luo S D, Schaffer G B, and Qian M, Mater Sci Eng A, 573 (2013) 166.
Zhao P, Wang Q, Adv Mater Process, 80 (2012), 1.
Liang Z, Jianrong L, Qingjiang W, Rui Y, Chinese J Mater Res 23 (2009) 1.
Wang X, Rare Metal Mat Eng 44 (2015) 243.
Beibei D, Li B, Peng H, Zuoren N, Hot Working Tech, 40 (2011) 4.
Zhang S Z, Zhou B, Liu N, Chen L Q, Oxid Metals, 81 (2014) 373.
Haifang T, Yongqing Z, Quan H, Liying Z, Titan Ind Prog, 27 (2010) 16.
Xin S, Hong Q, Lu Y, Xi Z, Guo P, Qi Y, Zeng L, Chinese J Nonferr Metals, 20 (2010) 2142.
Tang H, Hong Q, Zhao Y, Wang Z, Hot Working Tech 39 (2010) 11.
Tang H, Study on Microstucture and High Temperature Properties of Ti600 Alloy, M.S. Thesis, Northeastern University, China (2010).
Zhang Z, Hong Q, Yang G, Luo G, J Mater Eng (2000) 18.
Peng H, Influence of Erbium on Microstructure and Properties of high Temperature Alloy, M.E. Thesis, Beijing University of Technology, China (2012).
Peng H, Li B, Jiaming Y, Tong L, Zuoren N, Sci Technol Eng, 12 (2012) 4124.
Wu Y, Guo Y, Xu G, Chang H, Cui Y, Metals, 9 (2019) 628.
Cai J, Ma J, Huang X, Cao C, J Mater Eng, 8 (2009) 84.
Huang Y, Jiang V, Shen J, Mater Sci Technol 21 (2013) 117.
Acknowledgements
The authors are thankful for the support of Natural Science Foundation of Jiangxi province (NO.20192BAB216005), Science and Technology Research Program of Jiangxi Educational Committee (NO.GJJ170550). Authors are also thankful to Xinxin Wu and Xiaoqiang Wang for their assistance in revising the manuscript.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, S., Deng, T., Zhang, Y. et al. Review on the Creep Resistance of High-Temperature Titanium Alloy. Trans Indian Inst Met 74, 215–222 (2021). https://doi.org/10.1007/s12666-020-02137-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-020-02137-x