Abstract
Newly synthesized nanocomposite coatings containing polypyrrole (Ppy), silanes, and CoO nanoparticles (polypyrrole/silane/CoO nanocomposite) for magnesium alloy (AZ91) protection in 3.5% NaCl solution were investigated by electrochemical techniques and mechanical studies. Electrochemical impedance spectroscopic (EIS) analysis displayed a significant increase in the charge transfer (Rct: 7516.67 kΩ cm2) and coating resistances (Rc: 4825.32 kΩ cm2) for Ppy/MES/CoO nanocomposite coating compared to polypyrrole coating (Rct: 545.88 kΩ cm2 and Rc: 9.86 kΩ cm2) at 80 days of immersion. Potentiodynamic polarisation studies exhibited a significant reduction in the corrosion current for the Ppy/silane/CoO nanocomposite. The passive layer formed by the studied nanocomposite prevented the diffusion of aggressive ions into the coating. The addition of silane functionalized CoO nanoparticles into the polypyrrole coating slowed down the diffusion of ions by forming an enclosed pathway. This resulted in charge transfer inhibition at the Mg alloy/electrolyte interface which suppressed the dissolution of Mg alloy. Scanning electrochemical microscopic (SECM) analysis confirmed the presence of the lowest corrosion current of 2.5 nA for Ppy/MES/CoO coated Mg alloy and a higher corrosion current of 13.6 nA for polypyrrole coating at 80 days immersion. Surface morphological studies of synthesized nanocomposite coatings were investigated by scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX) and X-ray diffraction (XRD) technique. SEM/EDX analysis displayed the formation of passive corrosion product layers that hindered the dissolution of magnesium alloy. The improved mechanical properties were noticed for the nanocomposite coatings containing silane-modified CoO nanoparticles and polypyrrole.
Similar content being viewed by others
References
Peron M, Torgersen J, Berto F (2017) Mg and its alloys for biomedical applications: exploring corrosion and its interplay with mechanical failure. Metals 7:252
Rajak DK, Wagh PH, Menezes PL et al (2020) Critical overview of coatings technology for metal matrix composites. J Biol Tribo Corros 6:12
Xavier JR, Nishimura T (2017) Evaluation of the corrosion protection performance of epoxy coatings containing Mg nanoparticle on carbon steel in 0.1 M NaCl solution by SECM and EIS techniques. J Coat Technol Res 14:395–406
Xavier JR, Nallaiyan R (2016) Application of EIS and SECM studies for investigation of anticorrosion properties of epoxy coatings containing ZrO2 nanoparticles on mild steel in 3.5% NaCl solution. J Fail Anal Prev 16:1082–1091
Tefashe UM, Dauphin-Ducharme P, Danaie M, Cano ZP, Kish JR, Botton GA, Mauzeroll J (2015) Localized corrosion behavior of AZ31B magnesium alloy with an electrodeposited poly (3, 4-ethylenedioxythiophene) coating. J Electrochem Soc 162:C536–C544
Seitz J-M, Collier K, Wulf E, Bormann D, Bach F-W (2011) Comparison of the corrosion behavior of coated and uncoated magnesium alloys in an in vitro corrosion environment. Adv Eng Mater 13(9):B313–B323
Zhang D, Qi Z, Wei B, Wang Z (2017) Effect of thermal oxidation on microstructure and corrosion behavior of the PVD Hf-coated Mg alloy. Adv Eng Mater 20:1700556
Chiu A, Liu HC (2018) Mechanical properties and corrosion behavior of WZ73 Mg alloy/SiCp composite fabricated by stir casting method. Metals 8:424
Ghali E, Dietzel W, Kainer KU (2004) General and localized corrosion of magnesium alloys: a critical review. J Mater Eng Perform 13:7–23
Song G, Atrens A (2003) Understanding magnesium corrosion—a framework for improved alloy performance. Adv Eng Mater 5:837–858
John S, Joseph A, Kuruvilla M et al (2017) Inhibition of mild steel corrosion using chitosan-polyvinyl alcohol nanocomposite films by sol-gel method: an environmentally friendly approach. J Biol Tribo Corros 3:3
Lyon SB, Bingham R, Mills DJ (2017) Advances in corrosion protection by organic coatings: what we know and what we would like to know. Prog Org Coat 102:2–7
Xavier JR (2020) Experimental investigation of the hybrid epoxy-silane coating for enhanced protection against the corrosion of aluminum alloy AA7075 frame in solar cells. Macromol Res 28:501–509
Dalmoro V, dos Santos JHZ, Armelin E, Alemán C, Azambuja DS (2013) A synergistic combination of tetraethylorthosilicate and multiphosphonic acid offers excellent corrosion protection to AA1100 aluminum alloy. Appl Surf Sci 273:758–768
Boomadevi Janaki G, Xavier JR (2020) Evaluation of mechanical properties and corrosion protection performance of surface modified nano-alumina encapsulated epoxy coated mild steel. J Biol Tribo Corros 6:20
Xavier JR (2019) Effect of surface modified WO3 nanoparticle on the epoxy coatings for the adhesive and anticorrosion properties of mild steel. J Appl Polym Sci 136:48323
Merisalu M, Kahro T, Kozlova J, Niilisk A, Nikolajev A, Marandi M, Floren A, Alles H, Sammelselg V (2015) Graphene—polypyrrole thin hybrid corrosion resistant coatings for copper. Synth Met 200:16–23
Chaudhari S, Gaikwad AB, Patil PP (2010) Synthesis and corrosion protection aspects of poly(o-toluidine)/CdO nanoparticle composite coatings on mild steel. J Coat Technol Res 7:119–129
Xavier JR (2020) Enhanced adhesion and corrosion protection properties of surface modified Sb2O3–epoxy nanocomposite coatings on mild steel. J Fail Anal Prev 20:523–531
Wang H, Di D, Zhao Y, Yuan R, Zhu Y (2019) A multifunctional polymer composite coating assisted with pore-forming agent: preparation, superhydrophobicity and corrosion resistance. Prog Org Coat 132:370–378
Beryl JR, Xavier JR (2020) Electrochemical and mechanical studies of epoxy coatings containing eco-friendly nanocomposite consisting of silane functionalized clay-epoxy on mild steel. J Biol Tribo Corros 6:126
Xiao X, Wang D, Li Y, Jackson E, Fang Y, Zhang Y, Xie N, Shi X (2016) Investigation into the synergistic effect of nano-sized materials on the anti-corrosion properties of a waterborne epoxy coating. Int J Electrochem Sci 11:6023–6042
Turhan MC, Weiser M, Killian MS, Leitner B, Virtanen S (2011) Electrochemical polymerization and characterization of polypyrrole on Mg–Al alloy (AZ91D). Synth Met 161:360–364
Hosseini MG, Sefidi PY (2017) Electrochemical impedance spectroscopy evaluation on the protective properties of epoxy/DBSAdoped polyaniline-TiO2 nanocomposite coated mild steel under cathodic polarization. Surf Coat Technol 331:66–76
Ghanbari A, Attar MM (2015) A study on the anticorrosion performance of epoxy nanocomposite coatings containing epoxy-silane treated nano-silica on mild steel substrate. J Ind Eng Chem 23:145–153
Zhou C, Liu T, Liu J, Lu X, Shi Y, Zhou S, Xin Z (2018) Polybenzoxazine/organoclay composite coatings with intercalated structure: relationship between solubility parameters and corrosion protection performance. Prog Org Coat 115:188–194
Yan C, Fan X, Li J, Zhiqi Shen S (2011) Study of surface functionalized nano-SiO2/polybenzoxazine composites. J Appl Polym Sci 120:1525–1532
Zheng Z, Schenderlein M, Huang X, Brownbill NJ, Blanc F, Shchukin D (2015) Influence of functionalization of nanocontainers on self-healing anticorrosive coatings. ACS Appl Mater Interfaces 7:22756–22766
Zegaoui A, Derradji M, Ma R, Cai WA, Liu WB, Wang J, Dayo AQ, Song S, Zhang LL (2018) High-performance polymeric materials with greatly improved mechanical and thermal properties from cyanate ester/benzoxazine resin reinforced by silane-treated basalt fibers. J Appl Polym Sci 135:46283
Agag T, Takeichi T (2011) Synthesis and characterization of benzoxazine resin-SiO2 hybrids by sol-gel process: the role of benzoxazine-functional silane coupling agent. Polymer 52:2757–2763
Arora K, Chaubey A, Singhal R, Singh RP, Pandey MK, Samanta SB, Malhotra BD, Chand S (2006) Application of electrochemically prepared polypyrrole-polyvinyl sulphonate films to DNA biosensor. Biosens Bioelectron 21:1777
Xavier JR (2020) Electrochemical, mechanical and adhesive properties of surface modified NiO-epoxy nanocomposite coatings on mild steel. Mater Sci Eng B 260:114639. https://doi.org/10.1016/j.mseb.2020.114639
Zhou C, Tao M, Liu J, Liu T, Lu X, Xin Z (2019) Effects of interfacial interaction on corrosion resistance of polybenzoxazine/SiO2 nanocomposite coatings. ACS Appl Polymer Mater 1(3):381–391
Xavier JR (2020) Improvement of mechanical and anticorrosion coating properties in conducting polymer poly(propyl methacrylate) embedded with silane functionalized silica nanoparticles. Silicon. https://doi.org/10.1007/s12633-020-00679-9
Acknowledgements
The authors thank Vice Chancellor Prof. S. Salivahanan and the Management of Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Avadi, Chennai-600 062, Tamil Nadu, India, for their constant encouragement and constructive suggestions regarding this research.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Xavier, J.R., Beryl, J.R., Vinodhini, S.P. et al. Enhanced Protective and Mechanical Properties of Polypyrrole Coatings Modified by Silane/CoO Nanocomposite on AZ91 Mg Alloy in Chloride Media. J Bio Tribo Corros 7, 46 (2021). https://doi.org/10.1007/s40735-021-00479-7
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40735-021-00479-7