Abstract
High-speed camera (HSC) is an advanced technology, which can be applied to observe the solid–liquid interface directly during solidification. It has never been reported that the temperature evolutions of solidification that was monitored by using cameras and their images. In this study, a new application of HSC technology was developed for the temperature evolution investigation. With this technology, the effects of the measured position, the thermocouple size and thermocouple sensitivity (delay) can be demonstrated in temperature measurement. It is important that the higher accuracy of temperature profiles can be obtained by the HSC technology. This method can be expected to analyze the temperature profiles of small melt-pool and subsequent rapid solidification process in additive manufacturing. In the end, we discussed the relationship of the recalescence rate and the solidification interface.
Similar content being viewed by others
References
Ghomashchi R, Nafisi S. Some remarks on cooling curves as a principle tool for solidification characterization. J Cryst Growth. 2017;458:129–32.
Liao HC, Zhang M, Bi JJ, Ding K, Xi X, Wu SQ. Eutectic solidification in near-eutectic Al-Si casting alloys. J Mater Sci Technol. 2010;26:1089–97.
Vijeesh V, Prabhu KN. Computer aided cooling curve analysis and microstructure of cerium added hypereutectic Al–Si (LM29) Alloy. Trans Indian Inst Met. 2014;67:541–9.
Amin KM, Mufti NA. Investigating cooling curve profile and microstructure of a squeeze cast Al–4%Cu alloy. J Mater Process Technol. 2012;212:1631–9.
Gibbs JW, Mendez PF. Solid fraction measurement using equation-based cooling curve analysis. Scr Mater. 2008;58:699–702.
Lakshmi H. A calorimetric method for determination of solid fraction during solidification in a linear electromagnetic stirrer. J Therm Sci Eng Appl. 2012;4:011006.
Loizaga A, Niklas A, Fernandezcalvo A, Lacaze J. Thermal analysis applied to estimation of solidification kinetics of Al-Si alloys. Cast Metals. 2009;22:345–52.
Xu JF, Jian ZY, Dang B, Zhang D, Liu F. Solidification behavior and cooling curves for hypereutectic Fe-21 At. Pct B Alloy. Metall Mater Trans A. 2017;48:1817–26.
Bassler BT, Hofmeister WH, Bayuzick RJ, Gorenflo R, Bergman T, Stockum L. Observation of alloy solidification using high speed video. Rev Sci Instrum. 1992;63:3466–71.
Aoyama T, Kuribayashi K. Rapid solidification process of semiconductor from highly undercooled melts. Mater Sci Eng A. 2001;304–306:231–4.
Nagashio K, Li MJ, Kuribayashi K. Containerless solidification and net shaping by splat quenching of undercooled Nd2Fe14B melts. Mater Trans. 2003;44:853–60.
Nozaki K, Nagashio K, Kuribayashi K. N-SITU observation of solidification behaviour from undercooled α-Fe2Si5 melt using an electromagnetic levitator. Rev Adv Mater Sci. 2008;18:439–43.
Löser W, Woodcock TG, Shuleshova O, Hermann R, Lindenkreuz H-G, Gehrmann B, Schneider S, Volkmann T. Metastable solidification in undercooled liquid droplets of Fe-Ni based soft-magnetic alloys under terrestrial and microgravity conditions. J Phys: Conf Ser. 2011;327:012005.
Zhang D, Xu JF, Liu F. In situ observation of the competition between metastable and stable phases in solidification of undercooled Fe-17at.%B alloy melt. Metall Mater Trans A. 2015;46:5232–9.
Xu JF, Liu F, Zhang D. Phase selection of undercooled solidification of Ni-4.5 wt pct B alloy. J Mater Res. 2013;28:3347–54.
Xu J, Yang T, Li Z, Wang X, Xiao Y, Jian Z. The recalescence rate of cooling curve for undercooled solidification. Sci Rep. 2020;10:1380.
Roberts-Austen WC. Suffusion in Metals and Alloys. Nature. 1898;58:619–21.
Suzuki M, Piccone TJ, Flemings MC, Brody HD. Solidification of highly undercooled Fe-P alloys. Metall Trans A. 1991;22:2761–8.
Acknowledgements
This work was financially supported by the fund of the Foundation of Shaanxi Provincial Department of Education (No. 18JS050), the Science and Technology Program of Shaanxi Province (No. 2016KJXX-87) and the Natural Science Foundation of China (Nos. 51671151, 51971166). The authors also thanks to Di Zhang, Tao Zhang and Dandan Fan for help in this work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Supplementary material 1 (WMV 73 kb)
Rights and permissions
About this article
Cite this article
Xu, J., Xiao, Y. & Jian, Z. Observe the temperature curve for solidification from high-speed video image. J Therm Anal Calorim 146, 2273–2277 (2021). https://doi.org/10.1007/s10973-020-10424-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-020-10424-4