Abstract
Bacterial cellulose (BC) is a natural biodegradable, eco-friendly fiber, lying within the nanoscale range. It is reputable for its various physical and chemical qualities, like high hydrophilicity, immense crystallinity, ease of sterility, being toxin-free, and extremely pure. Adding to its wide applicability in different fields, this study evaluated the applicability of a developed gelling substitute for plant tissue culture media. The BC matrix was characterized under the acronym PLATIBACGEL (PLAnt TIssue Culture BActerial Cellulose GEL), formed by Komagataeibacter hansenii AS.5, preisolated from rotten apple waste. Scanning electron microscope, Fourier-transform infrared, X-ray diffractometer, and tensile strength analyses confirmed the formation of purified, porous, and heterogeneous densely packed multiple network polymers possessing cellulose properties. The water holding capacity (WHC) values of wet and dried BC membranes were 9179% and 226.9%, respectively, and the water absorption rate (WAR) of dry BC membranes was higher than that of wet membranes. Using BC as a tissue culture gelling agent, six genotypes from tomato and wheat seeds were cultured in vitro, for guaranteeing explant genetic diversity, over seven treatments. Treatment 5, included PLATIBACGEL as the main constituent, improved and sustained all in vitro seed germination, root penetration, and plant support. Likewise, repeated tomato micropropagation subcultures were successful. Results demonstrated applying PLATIBACGEL as a promising, reusable, cheap, and reliable alternative plant micropropagation media gelling agent. Wherefore, plant cellular developers and tissue-culturists can utilize bio-polymers like BC for better understanding plant cell response to different in vitro culturing conditions, with expected beneficial returns on gelling agents industry and markets as well.
Graphical abstract
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs10570-022-04757-6/MediaObjects/10570_2022_4757_Figa_HTML.png)
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
Introduction
Gelling agents are polymeric structures composed of some colloidal polysaccharides or certain proteins that originate from microbes, algae, or plants. They can solidify or stabilize the medium by forming continuous three-dimensional molecular networks. They are commonly added to liquid media to convert them into solid or semisolid structures (Das et al. 2015). Adding gelling agents to liquid media can give them firmness and influence their diffusion characteristics. The medium’s viscosity is the primary factor determining its diffusion rate, which is almost dependent on the concentration and physicochemical characteristics of the applied gelling agent (Palaniraj and Jayaraman 2011). An ideal gelling agent must be colorless, odorless, and preserve moisture effectively.
Most gelling agents have limited pH and temperature ranges, implying that outside their optimal ranges, they become ineffective in achieving the required purposes. Although some applied gelling agents have a wide working temperature and pressure range, most of them can be easily degraded by various microorganisms; thus, indicating the need for other alternative gelling agents with more powerful properties (Das et al. 2015; Jain et al. 2005).
Both gelatin and agar were discovered in the 1950s, and xanthan was discovered from the bacterium Xanthomonas campestris after several decades (Bellini et al. 2015). Furthermore, carrageenan and gellan gum were discovered in two successive years, viz., 1977 and 1978, respectively (Jamshidian et al. 2014; Razavi et al. 2014). Another alternative gelling agent known as isubgol was reported in 1997, followed by guar gum in 2005 (Babbar and Jain 1998; Fialho et al. 2008; Kirchmajer et al. 2014; Naik et al. 2020).
Among all these gelling agents, agar is the most frequently used in plant tissue culture due to its desirable characteristics of being clear, stable, and resistant to degradability by plant enzymes. However, there are reports of adverse effects of agar, such as inhibition of growth, impairment of vitrification, and batch-to-batch variability. In contrast, agar can be the most expensive gelling agent based on the price of basic tissue culture components (Dhawale et al. 2021; Puchooa et al. 1999).
In an effort to reduce the cost of commercial micropropagation, other alternatives, such as methylcellulose, potato and corn starches, alginate, gellan gum, gelatin, pectin, and microcrystal cellulose have been used instead of agar (Bornman and Vogelmann 1984; Calleberg et al. 1989; Gorinova et al. 1993; Hassan and Moubarak 2020; Mbanaso and Roscoe 1982).
According to our current research, a substitute gelling agent that is proposed for use in the field of plant tissue culture, and would be a promising alternative is bacterial cellulose (BC).
In general, cellulose is a linear organic polysaccharide discovered in 1838 by Payen. It is known for its insolubility in water and hydrophilic behavior. It is also nondegradable in physiological environments due to the lack of appropriate enzymes that can break down its beta acetal linkage (Wang et al. 2019). It is commonly found in the cell walls of plants, especially in the stem, branches, and woody parts, and other microorganisms such as bacteria, fungi, and algae (Mohammad et al. 2014; Poddar and Dikshit 2021). In 1886, Brown reported the first production of cellulose from the bacterium Acetobacter xylinum (Brown 1886; Rusdi et al. 2022). BC is a polysaccharide containing hundreds to thousands of chain β (1–4) d-glucose units. It has a high Young’s modulus value (Hsieh et al. 2008), high water uptake capacity, and high aspect ratio (Trovatti et al. 2010). It is produced from different Gram-negative and Gram-positive bacterial species and has different structures, morphology, and properties (Jonas and Farah 1998). However, its purification and macromolecular characteristics can differ (Wang et al. 2019). Both BC and plant cellulose have the same chemical structure, but the former has better fibers that can reach > 50 nm in length (Phillips and Williams 2000).
The microbial production of BC depends on using one of three incubation methods: static, shaking, and bioreactor cultures, which result in different microscopic morphology, properties, and microstructures. Incubation under static conditions results in the accumulation of a gelatinous cellulosic membrane that floats on the nutrition solution, whereas incubation under shaking conditions results in the formation of sphere-like, pellet-like, asterisk-like, or irregular masses (Pandit and Kumar 2021; Rani and Appaiah 2011; Watanabe et al. 1998). The final required application and the required physical and mechanical characteristics are almost determined and help to select the convenient incubation method (Wang et al. 2019).
Gottlieb Haberlandt proposed the first in vitro plant tissue culture method in 1902 (Haberlandt 1902; Laimer 2003). The proposal was a theoretical explanation for the in vitro application of tissue cultures based on the totipotency of plant cells. He was trying to understand the functions and relationships among cells of multicellular organisms. His studies depended on the cultivation of isolated plant cells in a nutrient solution (Loyola and Vázquez 2006; Smith 2012). However, the first truly successful plant cell culture method was developed in 1922 when Robbins cultivated the tips of roots and stems, overcoming the problem of medium sterilization (Aldowigh 2022; Robbins 1922). The discovery of in vitro plant cell culture allows the cultivation of wild plants, such as those containing bioactive compounds that are intensively used in pharmaceutical fields. Such plants are considered endangered medicinal plants as they face destructive harvesting practices and overharvesting for the production of medicines (Mulabagal and Tsay 2004).
Applying in vitro-propagated plants helps obtain a uniform, sterile, and easily cultivated plants possessing active constituents that can be accurately identified and characterized (Khan et al. 2021; Miura et al. 1987). Moreover, the compounds obtained from tissue culture can be easily purified as they can be easily extracted, reducing production costs and processing costs (Mulabagal and Tsay 2004). In addition, the physiological processes of in vitro-cultured plants could be controlled to a greater extent because of the discovery of plant growth regulators, including plant hormones, which was the major factor that revolutionized the development of this technology (Dias et al. 2016; Roberts 2012).
The present study aimed to use BC as an innovative gelling agent, namely PLATIBACGEL (PLAnt TIssue Culture BActerial Cellulose GEL), for plant cell culture applications. The aim also extended to evaluate its potentiality for the in vitro cultivation of different genotypes, such as tomato and wheat, as they represent two economic plant species.
The research objectives also extended to provide the field of plant tissue culture with an inexpensive and promising gelling agent, such as PLATIBACGEL. It is a solid material that can resist changes in pH and temperature ranges, cannot be degraded by plant enzymes, and can be insusceptible to microbial contamination.
Although BC production from microbes has recently received much attention and application in different fields, our research hypothesis was that producing PLATIBACGEL from BC is a promising alternative for ordinary media gelling agents. It could be used in in vitro seed germination and plant tissue culture. Primarily, polymer technology could be integrated into broader disciplines. Products such as PLATIBACGEL can be applied in plant cell biology and development to better understand plant cell responses under different in vitro culture conditions. The use of PLATIBACGEL represents an inexpensive and simple handling procedure for plant tissue culturists, and the field is still open for further investigations and applications.
Materials and methods
Strain and preinoculum
The BC membrane used in this study was synthesized using Komagataeibacter hansenii AS.5 (K. hansenii AS.5) (ac: MH109871) strain that was isolated from rotten apple samples, as reported in our previous study (Saleh et al. 2019). The standard Hestrin–Schramm (HS) medium was used for preinoculum preparation, which consisted of (in g/L) 20 d-glucose, 5 peptone, 5 yeast extract, 2.7 Na2HPO4, and 1.15 citric acid, with pH being adjusted to 6.0 ± 0.02. After sterilization, the medium was inoculated with a single colony of K. hansenii AS.5 and incubated at 30 °C and 200 rpm for 2 days.
Biosynthesis and purification of BC
As reported in our previous study (Saleh et al. 2020), the optimized medium was used for BC production using the following composition (in g/L): 25 glucose, 13 yeast extract, 0.15 MgSO4, and 2 KH2PO4 and 7.18 ml/L ethanol with subsequent sterilization at 15 psi, 121 °C for 20 min. The optimized parameters were as follows: pH 5.5 ± 0.02, inoculum size of 7%, production temperature of 20 °C, and incubation period of 9 days. After the completion of fermentation, the observed BC pellicle on the air–liquid interface was harvested and washed 3–4 times with distilled water to eliminate the residues of medium components. The BC pellicle was soaked in 0.125 M NaOH for 30 min at 90 °C to remove microbial contaminants and other impurities and then rinsed several times with distilled water and once with a washing liquid of neutral pH, after which bright-white BC was obtained (Hsieh et al. 2016).
Determination of dry and wet weights of BC membranes
After the purification of BC, its wet weight was immediately recorded, followed by drying it at 70 °C until a constant weight was obtained. The BC membranes’ wet and dry weights were recorded in g/L (Khattak et al. 2015).
Thickness of dry and wet BC membranes
The thickness of the wet and dry BC membranes was measured using an electronic digital micrometer. Ten different points of each membrane were selected for the measurements, and the average of the obtained readings was calculated (Semjonovs et al. 2017).
Water holding capacity (WHC) of dry and wet BC membranes
To determine WHC; wet BC samples were webbed by a soft tissue and their weight was recorded (Wh = hydrate weight). The BC samples were dried for 24 h at 70 °C until a constant weight was achieved (Wd = dry weight) to remove the water completely. Finally, the WHC was calculated using the following formula: WHC (%) = (Wh − Wd)/Wd. The dried BC samples were first immersed in a beaker containing distilled water for 12 h at room temperature under 100 rpm, after which they were weighed (Wh = hydrate weight) and considered as wet BC samples before their subsequent drying under the above mentioned drying conditions. Results were calculated as the average of three samples (Barshan et al. 2019).
Water absorption rate (WAR) of dry and wet BC membranes
The WAR of dry or wet BC samples was determined according to the shake method (Schrecker and Gostomski 2005) with a few modifications. Each BC sample was cut into three pieces (5 mm2) and immersed in distilled water at room temperature for 24 h at 100 rpm. The WAR of each BC membrane was analyzed by continuously measuring its weight, calculated as WAR (%) = (W1 − W)/W × 100, where W1 (g) was the weight of BC after absorbing water, and W (g) was the weight of the BC sample (dry or wet).
Characterization of BC dry membrane
The surface morphology of the BC membrane was examined under a scanning electron microscope (SEM) (JEOL JSM 6360 LA®, Japan) at a magnification of 5000×, and an applied voltage of 10 kV. The functional groups and chemical bonds of BC samples were analyzed by Fourier-transform infrared spectroscopy (FT-IR) (JASCO FTIR-4100 E®, Japan), operated in the absorption mode at a wavenumber range of 4000–500 cm−1 and a resolution of 1 cm−1. The dried samples’ crystallinity was determined using X-ray diffractometer (XRD) patterns collected on an XRD (X PERT PRO-PAN® Analytical-Netherlands) with a back monochromatic and a Cu anticathode. Samples were scanned with 2θ ranging from 5° to 80°, at a scan rate of 5° per min. The mechanical properties, including tensile strength, elongation at break, and Young’s modulus, of dry BC membranes, were investigated using a universal tensile testing machine (Universal Testing Machine, model: AG-I/50 N-10 kn®, Japan). The BC membrane was cut into rectangular strips (10 cm long and 1 cm wide) for measurement, with a gage length of 20 mm. Each test was performed using three specimens, and the average of the results was recorded.
In vitro culture and propagation
Two major genetically different crops representing two different plant families have been used for testing PLATIBACGEL as a successful plant tissue culture media gelling agent. Explants from tomato (Solanum lycopersicum), family Solanaceae, and wheat (Triticum aestivum L.), family Poaceae, were used to ensure that PLATIBACGEL would work for different plants of various genetic origins.
Explant material
Tomato (S. lycopersicum) tissue culture
Five different F1 tomato seed genotypes (TG1; Determinate: Cheyenne E448, TG2; Determinate: GS 12, TG3; Determinate: Nairouz (TH 99806), TG4; Determinate: Tomaland (TH 01308), and TG5; Indeterminate: Tyrmes), obtained from Syngenta®, Egypt, were used as an explant sources in this experiment. This hypothesis was proposed depending on the genetic variation between the two plant species, derived from irrelevant families, and was put under investigation. Although there is no complete gurantee that PLATIBACGEL would work for “all” plant species, however, choosing two plants owning different genetic composition, could represent a proper practice for ensuring wide application. At least in this case, applying PLATIBACGEL on tomato and wheat would give better resolution than applying it on a model plant, while there would be no warranty for PLATIBACGEL applicability if model plants were used too. Of course, we look forward to applying it on more plant types as well.
Wheat (T. aestivum L.) tissue culture
Wheat “Giza 168” local genotype (WG) seeds, obtained from the Egyptian Agricultural Research Center (Giza, Egypt), were used as an explant source in this experiment.
In vitro seed germination
For plant tissue culture and in vitro seed germination process, seeds were washed thoroughly with distilled water, soaked in tween® 20 solutions, and then washed again before sterilization using a 5% commercial bleach solution (Clorox®; active ingredient sodium hypochlorite) for 5 min. Next, the seeds were soaked in 70% alcohol for 3 min and washed and rinsed 4–6 times with sterilized deionized distilled water before being cultured in plant tissue culture containers (Magenta®, USA, tissue culture glass jars, and/or transparent Falcon Flat Base®, USA). For tomato plantlets, subcultures of shoot segments were performed every 4 weeks as required.
Tissue culture media preparation
As this study aimed to evaluate PLATIBACGEL gelling agent as a potential alternative to classical gelling materials, a set of treatments has been practiced, as shown in Table 1. Modified Murashige and Skoog (MS) (Murashige and Skoog 1962) basal medium without vitamins (Duchefa®, Netherlands) but containing sucrose (30 gl−1) and agar (8 gl−1) (Sigma®, Germany) was used. In contrast, medium containing 1 mg l−1 indole-3-acetic acid (IAA) and 2 mg l−1 gibberellic acid (GA3) (Sigma®, Germany) was used as required for specific treatments (MS and/or any additives were supplied as a solution, left to be absorbed by dry PLATIBACGEL), as shown in Table 1. Plant tissue culture tools were sterilized in a dry oven, and media pH was adjusted to 5.8 before sterilization by autoclaving (121 °C and 15 psi for 20 min). The presence of any contamination was regularly monitored and reported. All plants were cultured under aseptic conditions in a laminar flow hood (Thermo Fisher Scientific®, UK) and subsequently incubated at 18–23 °C in a 16:8 h light:dark photoperiod, according to plant species growth requirements.
Statistical analysis
For both tomato and wheat in vitro growth, phytotechnical parameters, such as plant germination percentage (PG %), plant root length (RL, cm/plant), plant shoot length (SL, cm/plant), shooting percentage (St, %), and rooting percentage (Rt %), were recorded. The number of shoots per explant (NSE) was regularly monitored and recorded every 2 weeks for wheat cultures only. One hundred explants were used as replicates for every treatment to facilitate calculation processes. Differences among mean values were considered significant at P-value < 0.05 in multiple ranges. The least significant difference compared and resolved differences among the mean values of replication using the IBM SPSS® software, 1997, according to Duncan’s multiple range test (Duncan 1955).
Results and discussion
Weights and thickness of dry and wet BC membranes
As reported previously, K. hansenii AS.5 was isolated from rotten apple samples and used as a BC producer. After 1 week of incubation in HS media, the initial production weights were 2.48 and 139.4 g/L for dry and wet BC membranes, respectively. The one-variable-at-a-time (OVAT) method was applied to enhance BC production to reach 3.75 and 338.4 g/L for dry and wet BC membranes, respectively, using modified Yamanaka media. Finally, statistical optimization achieved 6.30 and 582.7 g/L for dry and wet BC membranes, respectively (Khera et al. 2019; Saleh et al. 2020). The different optimization strategies positively affected the weight of the produced BC membranes, which is consistent with previous studies (Barshan et al. 2019; Lin et al. 2014). The BC thickness was influenced by the culture and environmental conditions, as shown by the obtained results. The BC thickness in the initial production reached 0.18 and 1.6 mm for dry and wet BC membranes, respectively. With OVAT optimization, the thickness reached 0.26 and 3.7 mm for dry and wet BC membranes, respectively. After statistical optimization, the respective BC thickness was 0.35 and 6 mm. Thus, the weight and thickness of the synthesized BC membranes are proportionally matched.
WHC and WAR% of dry and wet BC membranes
WHC and WAR are important parameters that play a vital role in different BC applications, such as biomedical, cell culture, and active ingredient carriers (Gorgieva 2020; Lin et al. 2013). For wet BC, the average wet weight of the BC membrane was 12.323 g, and its dry weight was 0.1328 g. Based on this result, the WHC was 9179%. The average wet weight of BC membrane for dry BC was 0.0425 g, and its dry weight was 0.0130 g. According to this result, the WHC was 226.9%. A comparison between dry and wet BC membranes based on WHC showed that the WHC reached 173 and 690 times of dry weight for dry and wet BC membranes, respectively. Table 2 shows the WAR values measured at different time points for dry and wet BC membranes produced by K. hansenii AS.5. The WAR values for dry and wet BC membranes gradually increased with time until reaching constant weights after 60 min. The WAR of dry BC membranes was higher than that of wet BC membranes, but it was similar to that reported in previous studies (Dikshit and Kim 2020; Feng et al. 2015). The WHC and WAR depend on BC network structure, such as the morphology, pore size, high surface area per unit mass and fiber homogeneity. The BC membranes mechanism of water holding depends on the numerous hydroxyl (OH) groups of fibrils. These groups interact to form intramolecular and intermolecular hydrogen bonds between β-d-glucopyranose monomers to form amorphous and crystalline domains. The absorbed water molecules render the BC membrane hydrophilic (Rebelo et al. 2018; Ul-Islam et al. 2012).
Characterization of dry BC membrane
SEM analysis
The detailed morphological structure of dry BC membrane was investigated using SEM. As shown in Fig. 1A (1, and 2), the pellicle BC membrane obtained from K. hansenii AS.5 is purified, porous, and heterogeneous. It is densely packed in a tridimensional interconnected network structure originating from randomly oriented nanocellulose and microcellulosic fibers (Bagewadi et al. 2020; Saleh et al. 2020). The BC membranes surface purification was confirmed by applying NaOH solution for the treatment process to remove all impurities and microbial contaminants (Bilgi et al. 2016; Lee et al. 2015).
FT-IR analysis
The chemical structure (functional groups and molecular bonding) of the BC membrane obtained from K. hansenii AS.5 was evaluated by FT-IR spectroscopy at the wave number of 4000–500 cm−1, as shown in Fig. 1B. A band of intense absorption in the BC spectrum at 3354.3 cm−1 was attributable to the presence of the OH group of cellulose type I (Fan et al. 2016; Saleh et al. 2020), and a strong absorption band at 2897.1 cm−1 was also attributable to the presence of CH2 stretching vibrations (Rozenberga et al. 2016). The cellulose absorption spectrum is the band at 1645.3 cm−1 assigned to the carboxyl functional group (Lin et al. 2016). Bands also appeared at 1433.1 cm−1 (asymmetric angular deformation of C–H bonds), 1348.2 cm−1 (symmetric angular deformation of C H bonds), 1151.5 cm−1 (asymmetric stretching of C–O–C glycoside bonds), 1099.4 and 1053.1 cm−1 (stretching of C–OH and C–C–OH bonds in secondary and primary alcohols), respectively, and 902.7 cm−1 (angular deformation of C–H bonds) (Saleh et al. 2020). Furthermore, the FT-IR data analysis revealed the presence of a crystalline region and the purity of the synthesized BC membrane (Castro et al. 2012).
XRD analysis
As depicted in Fig. 1C, the XRD pattern of the dry BC membrane showed different reflections at 14.91°, 17.26°, and 23.28°, respectively, displaying a typical pattern of cellulose Iα; these data are similar to those reported previously (Fang and Catchmark 2014; Rozenberga et al. 2016; Saska et al. 2011; Tyagi and Suresh 2016). The crystallinity index (CI) was calculated as the intensity of the main peak ratio and the count number of the adjacent minimum (Segal et al. 1959), yielding a CI of 86.7%. The CI of the BC membrane depends on the strain type used for BC production, such as CI = 83% for K. rhaeticus (Machado et al. 2016), CI = 79.3% for K. intermedius (Lin et al. 2016), and CI = 87% for Gluconacetobacter xylinum (Zhijiang and Guang 2011).
Mechanical strength
The mechanical strength of the dry BC membrane produced by K. hansenii AS.5 was evaluated. Results showed that, the average tensile strength, Young’s modulus, and elongation at break of the dry membrane were 59.7 ± 1.7 MPa, 2534 ± 3.42 MPa, and 1.1% ± 0.51%, respectively. Different studies have reported different mechanical properties of BC according to the type of microbial strain used (Dikshit and Kim 2020), incubation time (Zhang et al. 2020), additive concentrations (Sun et al. 2020), and cultivation conditions (Wang et al. 2019). Table 3 shows a brief comparison between some various BC properties, obtained from different bacterial strains.
In vitro seed germination and propagation of tomato and wheat
A biotechnological approach was followed in this study to produce an inexpensive and reliable plant tissue culture matrix that can act as a solidifying material for plant tissue culture media. Designing a matrix for supporting or hardening plant tissue culture medium using a BC-derived gelling agent under the acronym PLATIBACGEL has been challenging for the research team. It was expensive and overexploited when agar was predominantly used as the gelling agent for microbial and plant cell culture media (Das et al. 2019). Others have voiced concerns regarding agar applicability, especially for its limited resources overuse, and considerations include exorbitant pricing (Hassan and Moubarak 2020; Hegele et al. 2021). Previous studies have investigated the use of alternative gelling agents such as gelrite (Gehad M Mohamed et al. 2021), gum katira (Jain and Babbar 2002), isubgol and sago starch (Bhattacharya et al. 1994), guar gum (Babbar et al. 2005), locust bean gum (LBG) (Gonçalves and Romano 2005), and xanthan gum (Jain and Babbar 2006). Consequently, this has widened the applicability of plant tissue culture techniques as an effective tool in biotechnology.
For instance, in our study, simply to calculate how much one liter of a medium would cost, in comparison to one liter prepared by agar (based on the agar used in our investigation, originated from Sigma; https://www.sigmaaldrich.com/US/en/product/sigma/a8678), one g of agar costs $1.78. Assuming that one agar-gelled media liter would need about 6–8 g of good quality tissue culture grade agar to solidify, then, one liter would approximately cost about $12. In comparison, it would cost about $0.2 to produce a 1 L solidified medium, using PLATIBACGEL, in a standard tissue culture Magenta container, filled with 40 ml of medium. In addition, PLATIBACGEL is reusable, and re-autoclavable, while agar, and most of other gelling agaents are «one-use-only» media solidifiers, and would lose thier gelling properties after being applied in a tissue culture process.
Micropropagation has been the most popular, widely used, and reliable plant tissue culture technique for establishing aseptic cultures and propagating many plants in vitro (Gupta et al. 2020). When establishing a plant tissue culture protocol using new materials, there are often some problems. As long as the totipotency of plants to propagate and regenerate in vitro is sufficient, as long as this is reflecting how sufficient is the used medium, and optimal are the conditions. This has been inspected through seven different treatments using five tomato F1 genotypes and one wheat genotype as unrelative members of two dissimilar plant families to guarantee the genetic diversity among used explant sources. Therefore, we attempted to determine the appropriate procedure to achieve our study goal. Selecting the appropriate medium and certainly the composition of inorganic salts, plants, types and concentrations of growth regulators, and sugar sources are considered extremely important factors in the experimental output. However, the selection of the medium-solidifying agent is a difficult issue. Depending on the type of the solidifying agent used, there are severe effects on processes such as cell division, proliferation, and division frequency of adventitious bud/adventitious embryo differentiation and cell differentiation and secondary metabolite production. Although in vitro propagation has been extremely well elucidated in the literature, it is worth developing a customized system that meets the requirements of the culture (Shimomura and Kamada 1986).
Table 4 reveals the effects of using PLATIBACGEL as a newly tested plant tissue culture media gelling agent on RL (cm/plant) and plant SL (cm/plant) of in vitro-cultured tomato and wheat seeds, in addition to the NSE of only wheat seeds. Plant RL (cm/plant) and SL (cm/plant) varied significantly among the five tomato genotypes and the “Giza 168” wheat genotype, which were affected by the seven PLATIBACGEL treatments. RLs ranged from 2.8 cm/plant for TG3 to 3.21 cm/plant for TG1 as affected by treatment 1, whereas WG was 4.33 cm/plant for the same treatment. In treatment 2, TG4 showed the lowest value of 2.11 cm/plant, whereas TG1 showed the highest value of 3.62 cm/plant, and WG was 4.87 cm/plant. Furthermore, RL was the shortest among tomato genotypes, as influenced by treatment 3, where it ranged from 0.21 cm/plant for TG4 to 1.02 cm/plant for TG1; the same trend could be observed for WG, which was 1.88 cm/plant. In contrast, treatment 4 showed significant differences among tomato genotypes from TG5 (2.66 cm/plant) to TG1 (4.22 cm/plant), and simultaneously the WG reached 4.22 cm/plant. Considerably increased values were recorded among genotypes under treatment 5, where the tomato genotypes under TG1 (4.98 cm/plant), TG2 (3.55 cm/plant), TG3 (3.10 cm/plant), TG4 (4.11 cm/plant), and TG5 (4.24 cm/plant) showed the highest RL values among all treatments, including for the wheat genotype (WG = 5.98 cm) also. The RL values of the genotypes were significantly influenced by treatment 6, ranging from 2.18 cm/plant (TG2) to 3.35 cm/plant (TG3) in tomatoes and 3.99 cm/plant in wheat. Similarly, treatment 7 influenced the genotypes’ RL, ranging from 2.11 cm/plant for TG3 to 3.21 cm/plant for TG1 in tomatoes and 4.38 cm/plant in wheat. Moreover, the SL values showed the same variation patterns as those of RL values, as affected by genotypes and treatments, significantly ranging from 0.38 cm/plant (TG4) for treatment 3 to 14.38 cm/plant (TG1) for treatment 5 in tomatoes. Similarly, the WG showed the lowest SL (4.74 cm/plant) with treatment 3 and the highest SL (19.00 cm/plant) with treatment 5 (Table 4).
Table 4 and Fig. 4C show the NSE measured only for wheat, with values recorded as 3.00, 2.00, 1.00, 2.00, 4.00, 1.00, and 2.00 for treatments T1, T2, T3, T4, T5, T6, and T7, respectively.
Researchers have always been exploring other gelling aid replacements to address regular gelling agent problems. The functional properties of solidifying materials in plant tissue culture media have been reported for several years (Cassells and Collins 1999; Raina 2017; Shimomura and Kamada 1986). The efficiency of sago (from Metroxylon sagu Rottb.) and isubgol (from Plantago ovata Forsk.) as support matrices in gelling agents, filter paper, nylon cloth, polystyrene foam, and glass wool cloth has been evaluated for propagating chrysanthemum (Dendranthema grandiflora Tzvelev) plantlets, with optimistic results (Bhattacharya et al. 1994). A study conducted in 2002 demonstrated the use of gum katira, an insoluble gum derived from the bark of Cochlospermum religiosum, as an inexpensive gelling agent (Jain and Babbar 2002). Furthermore, the natural hydrocolloid extracted from the seeds of the carob tree (Ceratonia siliqua L.), namely “LBG,” was analyzed for its potential as plant tissue culture media (Gonçalves and Romano 2005). Recently, guar gum has also been explored in this context (Das et al. 2019). Studies were also extended to investigate a wide range of plant species and crops in an attempt to screen the best ingredients to be used in explants and medium components. Our study has also produced convincing results consistent with those obtained with bananas (Kacar et al. 2010), wheat (Malik et al. 2017), kiwi (Mardiana et al. 2018), oil and date palms (Al-Mayahi and Ali 2021; Palanyandy et al. 2020), and rice (Gehad M. Mohamed et al. 2021; Repalli et al. 2019).
Figure 2A shows the changes in the germination percentage (PG%) of tomato and WGs due to different PLATIBACGEL and medium treatments. The PG% for all tomato genotypes was relatively high; however, the lowest value was recorded with treatment 3 and TG3 in tomato (50.00%), whereas the same treatment also resulted in a relatively low percentage, with WG for wheat at 36.00%. The highest PG% was recorded with treatment 5 in either tomato or WG, reaching 99.00%.
Figure 2B shows the shooting percentage (St%) of tomato and wheat genotypes affected by different PLATIBACGEL and medium treatments. The lowest St% of 2.00% was recorded with WG, as affected by treatment 3. Moreover, the same treatment also resulted in relatively low St% among all tomato genotypes, reaching 12.00%, 8.00%, 16.00%, 9.00%, and 4.00% for TG1, TG2, TG3, TG4, and TG5, respectively, successfully.
Figure 2C illustrates the effect of different PLATIBACGEL and medium treatments on tomato and wheat genotypes’ rooting percentage (Rt %). In vitro-cultured plantlets that successfully germinated and efficiently produced shoots could also root easily. All germinated explants showed significant differences in rooting percentage among treatments and genotypes. Primarily, 100.00% Rt % was recorded for most genotypes with different treatments, except for treatment 3, which showed the minimum Rt %, reaching 30.00% with TG1 in tomato and 16.00% for WG in wheat.
Comparing PLATIBACGEL with other gelling agents is not oriented to its concentration in the medium, rather than being focused on its quality and performance. Based on our study results, treatment 5 (T5) maintained all the used explants for in vitro seed germination and even for tomato subcultures (Fig. 3C). T5 consisted of only PLATIBACGEL without any additives. Interestingly, tomato explants cultured on PLATIBACGEL medium could survive for almost 1 year without any subculturing processes (Fig. 3D). Seeds cultured on the agar gelling medium could hardly survive for a few weeks. However, the uniqueness of our results was that PLATIBACGEL was a plant supporting network and, “by a way or another,” a nutrition-supplying medium. Nevertheless, these results could not be interpreted as of now and represent another serious question to be answered later through further in-depth investigations. The inexpensiveness of BC-derived gels, in general, is due to their low maintenance requirements. A primary advantage of using PLATIBACGEL is its capability to sustain clear and clean, without any contamination, or even very limited contamination percentage (< 1%) among cultures, and also maintaining its aqueous stability for holding water or moisture inside the medium for long periods, as well as its durability and low degradation. Furthermore, PLATIBACGEL has additional benefits, such as ease of handling, re-autoclaving (rewashing and sterilization), and high absorbance of solutions (in our case MS and/or any additives were supplied as a solution, left to be absorbed by dry PLATIBACGEL). Although these unique characteristics may be relatively weird, the factors that receive more attention are its lower cost production than that of other gelling agents because it can be produced from different environmental waste raw materials, with impressive competitiveness.
In vitro propagation of tomato seeds; A In vitro propagation of control tomato seeds cultured on agar gelling medium (T7) 6 weeks after culture incubation, B In vitro propagation of tomato seeds cultured on PLATIBACGEL gelling medium (T5) 3 weeks after culture incubation, C In vitro propagation of tomato shoots subcultured on PLATIBACGEL gelling medium 2 weeks after culture incubation, D PLATIBACGEL gelling medium showing no contamination, purposely left for almost 1 year after tomato seed culture incubation
Since our findings revealed that T5 treatment, which consisted of BC only, could sustain the plant in vitro growth, meaning that it could do this without adding any further supplements to the medium; this condition was used for two reasons: the first one is to investigate if the bacterial strain can support the growth of the plant and interact positively as a plant growth enhancer. The second one depended on the success of the first assumption, and hence, would reduce the cost required for washing, and cleaning the BC matrix from the bacterial cells, incorporated inside its holes.
Explants were stimulated toward shoot and root formation, resulting in good average lengths in tomato and wheat, which could grow well on media and proliferate actively. Among T1, T2, T4, T5, T6, and T7, the performance of the in vitro-germinated seeds and grown explants was found to be very similar to their development pattern. Concerning PLATIBACGEL medium alone (T5), with no supplementation of plant tissue culture media, or any other nutritive additives to the culture conditions, it was observed that it could provide the best results for all the measured phytotechnical parameters. Tomato seedlings sprouted and shot up densely, and wheat plantlets showed an average of 3–5 branched offshoots per explant (Fig. 4). This indicates the reliability of PLATIBACGEL when combined or augmented with other plant growth regulators and supplements. In contrast, among the seven tested treatments, T3, representing the untreated PLATIBACGEL medium, showed significant differences from all other treatments and was characterized by its lowest potentiality to maintain cultured explants in vitro. This considerable difference could be attributable to the microbial content of the untreated cellulose membrane. It probably inhibited growth and suppressed the continuity of plant cell division progression under in vitro culture conditions due to competitive feeding purposes or other enzymatic reactions responsible for securing microbes’ nutritious requirements over any other organism.
In vitro propagation of wheat seeds; A In vitro propagation of wheat seeds cultured on PLATIBACGEL medium 1 week after culture incubation, B Lengths of micropropagated wheat plantlets 4 weeks after in vitro culture incubation, C Branched wheat offshoots from micropropagated plantlets on PLATIBACGEL medium (T5) 4 weeks after culture incubation
Although not relatively representing a new material in the industry, the benefit of using BC-derived gel in plant tissue culture media could be attributable to the reuse and application of the material itself.
Our findings revealed that PLATIBACGEL could work successfully as a substitute gelling agent for plant tissue culture media to replace some conventional gelling agents like agar. Although several previous studies have investigated other alternative gelling agents, with respect to other resources and materials, BC membranes have not been investigated precisely in such discipline. Therefore, our research is a pioneering step on the revolutionary pathway for future generations in the industry of media gelling agents and their production technology.
Besides its functionality and controllability of contamination in plant tissue cultures, it requires further extensive experiments. Future perspectives indicate some obstacles, such as achieving regular satisfactory thickness, the appropriateness of PLATIBACGEL as a BC membrane to be shaped easily and conveniently in plant tissue culture vessels, and its ability to be mixed with other different medium components. The manufacturing technology still faces these challenges on a large scale to apply PLATIBACGEL in the gelling agent market. Moreover, strategies concerning evaluating its reliability for producing whole in vitro plantlets, starting from callus regeneration till reaching the open field, require additional research. There are also concerns about its limitations and applicability in semisolid media. Future research must provide solutions to these obstacles, leading to further productive studies.
Conclusion
BC has been used in different environmental, medical, and industrial applications. The present study was concerned with using BC as a biopolymer matrix, under the acronym PLATIBACGEL, as a promising alternative for traditional media gelling agents for use in vitro seed germination and plant culture techniques. The physical and mechanical properties evaluated in this study, besides in vitro seed germination and tissue culture processes, revealed that the BC membrane could successfully aid the in vitro culture of two different plant species using seven different combinations and/or shifts between basic medium, agar/BC membrane, nutrients, and hormones. To examine the applicability of PLATIBACGEL on multiple plants, five tomato F1 genotypes, and one wheat genotype were used. Treatment 5 (T5) maintained all the used explants for in vitro seed germination and even for micropropagation subcultures. T5 treatment consisted of only PLATIBACGEL without any supplements. Importantly, tomato explants cultured on PLATIBACGEL medium could survive for almost 1 year without any subculturing processes. Seeds cultured on the agar-gelled medium could hardly survive for a few weeks. Furthermore, BC is a promising, inexpensive, and reliable alternative gelling agent for use in plant cell culture, with optimistic applications in the plant cell culture field. In addition, products such as PLATIBACGEL can be used in plant cellular biology and development to clarify plant cell responses to different in vitro culture conditions. However, the prospects of PLATIBACGEL require supplementary investigations to answer deeper significant questions about challenging perspectives such as its in vitro applicability on wider plant types, technical production procedures, and marketing of this promising material.
Patent
PLATIBACGEL is registered as a patent through the Egyptian Patent Office, Ministry of Scientific Research, Academy of Scientific Research and Technological Applications (ASRAT), Egypt, under the Access Number “1314/2021”.
References
Aldowigh F (2022) Control of adventitious root formation in Arabidopsis. Durham University, Durham, pp 376–390
Al-Mayahi AMW, Ali AH (2021) Effects of different types of gelling agents on in vitro organogenesis and some physicochemical properties of date palm buds. Showathy Cv Folia Oecol 48:110–117
Babbar S, Jain N (1998) Isubgol’as an alternative gelling agent in plant tissue culture media. Plant Cell Rep 17:318–322
Babbar S, Jain R, Walia N (2005) Guar gum as a gelling agent for plant tissue culture media. In Vitro Cell Dev Biol Plant 41:258–261
Bagewadi ZK, Bhavikatti JS, Muddapur UM, Yaraguppi DA, Mulla SI (2020) Statistical optimization and characterization of bacterial cellulose produced by isolated thermophilic Bacillus licheniformis strain ZBT2. Carbohydr Res 491:107979
Barshan S, Rezazadeh-Bari M, Almasi H, Amiri S (2019) Optimization and characterization of bacterial cellulose produced by Komagatacibacter xylinus PTCC 1734 using vinasse as a cheap cultivation medium. Int J Biol Macromol 136:1188–1195
Bellini MZ, Caliari-Oliveira C, Mizukami A, Swiech K, Covas DT, Donadi EA, Oliva-Neto P, Moraes AM (2015) Combining xanthan and chitosan membranes to multipotent mesenchymal stromal cells as bioactive dressings for dermo-epidermal wounds. J Biomater Appl 29:1155–1166
Bhattacharya P, Dey S, Bhattacharyya BC (1994) Use of low-cost gelling agents and support matrices for industrial scale plant tissue culture. Plant Cell Tissue Organ Cult 37:15–23
Bilgi E, Bayir E, Sendemir-Urkmez A, Hames EE (2016) Optimization of bacterial cellulose production by Gluconacetobacter xylinus using carob and haricot bean. Int J Biol Macromol 90:2–10
Bornman CH, Vogelmann TC (1984) Effect of rigidity of gel medium on benzyladenine-induced adventitious bud formation and vitrification in vitro in Picea abies. Physiol Plant 61:505–512
Brown AJ (1886) XLIII.—On an acetic ferment which forms cellulose. J. Chem. Soc. Trans 49:432–439
Cai Z, Kim J (2010) Bacterial cellulose/poly (ethylene glycol) composite: characterization and first evaluation of biocompatibility. Cellulose 17:83–91
Calleberg EK, Kristjansdottir IS, Johansson LB (1989) Anther cultures of tetraploid Solanum genotypes—the influence of gelling agents and correlations between incubation temperature and pollen germination temperature. Plant Cell Tissue Organ Cult 19:189–197
Cassells A, Collins I (1999) Characterization and comparison of agars and other gelling agents for plant tissue culture use. In: International symposium on methods and markers for quality assurance in micropropagation, vol 530, pp 203–212
Castro C, Zuluaga R, Álvarez C, Putaux J-L, Caro G, Rojas OJ, Mondragon I, Gañán P (2012) Bacterial cellulose produced by a new acid-resistant strain of Gluconacetobacter genus. Carbohydr Polym 89:1033–1037
Das N, Triparthi N, Basu S, Bose C, Maitra S, Khurana S (2015) Progress in the development of gelling agents for improved culturability of microorganisms. Front Microbiol 6:698
Das T, Sengupta S, Pal A, Sardar S, Sahu N, Lenka N, Panigrahi KC, Goswami L, Bandyopadhyay A (2019) Aquasorbent guargum grafted hyperbranched poly (acrylic acid): a potential culture medium for microbes and plant tissues. Carbohydr Polym 222:114983
Dhawale R, Patwari L, Sharma K, Bharose A (2021) Admixture of Isubgol Husk together with agar as gelling agent for sugarcane callus induction. J Pharm Innov 10:657–680
Dias MI, Sousa MJ, Alves RC, Ferreira IC (2016) Exploring plant tissue culture to improve the production of phenolic compounds: a review. Ind Crops Prod 82:9–22
Dikshit PK, Kim BS (2020) Bacterial cellulose production from biodiesel–derived crude glycerol, magnetic functionalization, and its application as carrier for lipase immobilization. Int J Biol Macromol 153:902–911
Duncan DB (1955) Multiple range and multiple F tests. Biometrics 11:1–42
Fan X, Gao Y, He W, Hu H, Tian M, Wang K, Pan S (2016) Production of nano bacterial cellulose from beverage industrial waste of citrus peel and pomace using Komagataeibacter xylinus. Carbohydr Polym 151:1068–1072
Fang L, Catchmark JM (2014) Structure characterization of native cellulose during dehydration and rehydration. Cellulose 21:3951–3963
Feng X, Ullah N, Wang X, Sun X, Li C, Bai Y, Chen L, Li Z (2015) Characterization of bacterial cellulose by Gluconacetobacter hansenii CGMCC 3917. J Food Sci 80:E2217–E2227
Fialho AM, Moreira LM, Granja AT, Popescu AO, Hoffmann K, Sá-Correia I (2008) Occurrence, production, and applications of gellan: current state and perspectives. Appl Microbiol Biotechnol 79:889–900
Gonçalves S, Romano A (2005) Locust bean gum (LBG) as a gelling agent for plant tissue culture media. Sci Hortic 106:129–134
Gorgieva S (2020) Bacterial cellulose as a versatile platform for research and development of biomedical materials. Processes 8:624
Gorinova N, Atanasov A, Alexandrova K, Velkova R, Kasachka A (1993) Comparison of agar and microcrystal cellulose as gelling agents forin vitro culture of Nicotiana tabacum stem expiants. Biol Plant 35:217–221
Gupta N, Jain V, Joseph MR, Devi S (2020) A review on micropropagation culture method. Asian J Pharm Res Dev 8:86–93
Haberlandt G (1902) Kulturversuche mit Isolierten Pflanzenzellen, Sitzungsberg. Kais. Akad Wiss Wien Mat-Naturwiss KI Abt 111:69–92
Hassan HMS, Moubarak M (2020) Micropropagation of yucca plant by using guar and locust bean seed powder as an alternative cheap gelling agent. Scientific Journal of Flowers and Ornamental Plants 7:239–246
Hegele S, Hegele M, Wünsche J (2021) Low-cost gelling agents for tissue culture propagation of plantain. In: IV International symposium on horticulture in Europe-SHE2021 1327, pp 341–348
Hsieh Y-C, Yano H, Nogi M, Eichhorn S (2008) An estimation of the Young’s modulus of bacterial cellulose filaments. Cellulose 15:507–513
Hsieh J-T, Wang M-J, Lai J-T, Liu H-S (2016) A novel static cultivation of bacterial cellulose production by intermittent feeding strategy. J Taiwan Inst Chem Eng 63:46–51
Jain N, Babbar SB (2002) Gum katira–a cheap gelling agent for plant tissue culture media. Plant Cell Tissue Organ Cult 71:223–229
Jain R, Babbar S (2006) Xanthan gum: an economical substitute for agar in plant tissue culture media. Plant Cell Rep 25:81–84
Jain R, Anjaiah V, Babbar S (2005) Guar gum: a cheap substitute for agar in microbial culture media. Lett Appl Microbiol 41:345–349
Jamshidian M, Savary G, Grisel M, Picard C (2014) Stretching properties of xanthan and hydroxypropyl guar in aqueous solutions and in cosmetic emulsions. Carbohydr Polym 112:334–341
Jonas R, Farah LF (1998) Production and application of microbial cellulose. Polym Degrad Stab 59:101–106
Kacar Y, Biçen B, Varol I, Mendi Y, Serçe S, Çetiner S (2010) Gelling agents and culture vessels affect in vitro multiplication of banana plantlets. Genet Mol Res 9:416–424
Khan A, Shah AH, Ali N (2021) In-vitro propagation and phytochemical profiling of a highly medicinal and endemic plant species of the Himalayan region (Saussurea costus). Sci Rep 11:1–13
Khattak WA, Khan T, Ul-Islam M, Wahid F, Park JK (2015) Production, characterization and physico-mechanical properties of bacterial cellulose from industrial wastes. J Polym Environ 23:45–53
Khera AS, Farrag AA, Soliman NA-M, Ibrahim MM, El-Shinnawy NA, Abdel-Fattah YR (2019) Evaluation of culture requirments for cellulose production by Egyptian local isolate alongside reference strain Gluconacetobacter hansenii ATCC 23769. Pakistan J Biotechnol 16:69–80
Kirchmajer DM, Steinhoff B, Warren H, Clark R, in het Panhuis M, (2014) Enhanced gelation properties of purified gellan gum. Carbohydr Res 388:125–129
Laimer M (2003) Plant tissue culture: 100 years since Gottlieb Haberlandt. Springer, Berlin
Lee CM, Gu J, Kafle K, Catchmark J, Kim SH (2015) Cellulose produced by Gluconacetobacter xylinus strains ATCC 53524 and ATCC 23768: Pellicle formation, post-synthesis aggregation and fiber density. Carbohydr Polym 133:270–276
Lin S-P, Calvar IL, Catchmark JM, Liu J-R, Demirci A, Cheng K-C (2013) Biosynthesis, production and applications of bacterial cellulose. Cellulose 20:2191–2219
Lin D, Lopez-Sanchez P, Li R, Li Z (2014) Production of bacterial cellulose by Gluconacetobacter hansenii CGMCC 3917 using only waste beer yeast as nutrient source. Bioresour Technol 151:113–119
Lin H-H, Hsu K-D, Lai Y-J, Chen Y-K, Cheng K-C (2016) Isolation and identification of cellulose-producing strain Komagataeibacter intermedius from fermented fruit juice. Carbohydr Polym 151:827–833
Loyola VM, Vázquez F (2006) Plant cell culture protocols. Springer, Human Press, USA
Machado RT, Gutierrez J, Tercjak A, Trovatti E, Uahib FG, de Padua MG, Nascimento AP, Berreta AA, Ribeiro SJ, Barud HS (2016) Komagataeibacter rhaeticus as an alternative bacteria for cellulose production. Carbohydr Polym 152:841–849
Malik K, Birla D, Yadav H, Sainger M, Chaudhary D, Jaiwal PK (2017) Evaluation of carbon sources, gelling agents, growth hormones and additives for efficient callus induction and plant regeneration in Indian wheat (Triticum aestivum L.) genotypes using mature embryos. J Crop Sci Biotechnol 20:185–192
Mardiana M, Zainuddin Z, Mahfudz M, Hawalina H (2018) The growth of kiwi shoot (Actinidia deliciosa) on various kinds of gelling agents. AGROLAND Agric Sci J 5:67–73
Mbanaso EA, Roscoe D (1982) Alginate: an alternative to agar in plant protoplast culture. Plant Sci Lett 25:61–66
Miura Y, Fukui H, Tabata M (1987) Clonal propagation of chemically uniform fennel plants through somatic embryoids. Planta Med 53:92–94
Mohamed GM, Amer AM, Osman NH, Sedikc MZ, Hussein MH (2021) Effects of different gelling agents on the different stages of rice regeneration in two rice cultivars. Saudi J Biol Sci 28:5738-5744
Mohammad SM, Rahman N, Khalil MS, Abdullah SRS (2014) An overview of biocellulose production using Acetobacter xylinum culture. Adv Biol Res 8:307–313
Mulabagal V, Tsay H-S (2004) Plant cell cultures-an alternative and efficient source for the production of biologically important secondary metabolites. Int J Appl Sci Eng 2:29–48
Murashige T, Skoog F (1962) A revised medium for rapid growth and bio assays with tobacco tissue cultures. Physiol Plant 15:473–497
Naik R, Bhushan A, Gupta R, Walia A, Gaur A (2020) Low cost tissue culture technologies in vegetables: a review. Int J Biochem Res Rev 29:66–78
Nascimento ES, Barros MO, Cerqueira MA, Lima HL, de Fatima BM, Pastrana LM, Gama FM, Rosa MF, Azeredo HM, Gonçalves C (2021) All-cellulose nanocomposite films based on bacterial cellulose nanofibrils and nanocrystals. Food Packag Shelf Life 29:100715
Palaniraj A, Jayaraman V (2011) Production, recovery and applications of xanthan gum by Xanthomonas campestris. J Food Eng 106:1–12
Palanyandy SR, Gantait S, Sinniah UR (2020) Effects of some gelling agents and their concentrations on conversion of oil palm polyembryoids into plantlets. J Genet Eng Biotechnol 18:1–5
Pandit A, Kumar R (2021) A review on production, characterization and application of bacterial cellulose and its biocomposites. J Polym Environ 29:2738–2755
Phillips GO, Williams PA (2000) Handbook of hydrocolloids. CRC Press, Boca Raton
Poddar MK, Dikshit PK (2021) Recent development in bacterial cellulose production and synthesis of cellulose based conductive polymer nanocomposites. Nano Select 2:1605–1628
Puchooa D, Purseramen P, Rujbally B (1999) Effects of medium support and gelling agent in the tissue culture of tobacco (Nicotiana tabacum). Univ Maurit Res J 3:129–144
Raina RJ (2017) Gelling agents for plant tissue culture media: a comparative study. Int J Innov Res Technol Sci Eng 3:324–331
Rani MU, Appaiah A (2011) Optimization of culture conditions for bacterial cellulose production from Gluconacetobacter hansenii UAC09. Ann Microbiol 61:781–787
Razavi M, Nyamathulla S, Karimian H, Moghadamtousi SZ, Noordin MI (2014) Hydrogel polysaccharides of tamarind and xanthan to formulate hydrodynamically balanced matrix tablets of famotidine. Molecules 19:13909–13931
Rebelo A, Archer AJ, Chen X, Liu C, Yang G, Liu Y (2018) Dehydration of bacterial cellulose and the water content effects on its viscoelastic and electrochemical properties. Sci Technol Adv Mater 19:203–211
Repalli SK, Geda CK, Pradhan N, Rao G (2019) Influence of additional nutrients and gelling agents on in vitro response of selected Indica rice varieties. Int J Biol 11:26–35
Robbins WJ (1922) Cultivation of excised root tips and stem tips under sterile conditions. Bot Gaz 73:376–390
Roberts JA (2012) Plant growth regulators. Springer, Berlin
Rozenberga L, Skute M, Belkova L, Sable I, Vikele L, Semjonovs P, Saka M, Ruklisha M, Paegle L (2016) Characterisation of films and nanopaper obtained from cellulose synthesised by acetic acid bacteria. Carbohydr Polym 144:33–40
Rusdi RAA, Halim NA, Norizan MN, Abidin ZHZ, Abdullah N, Ros FC, Ahmad N, Azmi AFM (2022) Pre-treatment effect on the structure of bacterial cellulose from Nata de Coco (Acetobacter xylinum). Polimery 67:110–118
Saleh AK, Farrag A, Soliman N, Ibrahim M, El-Shinnawy N, Abdel-Fattah YR (2019) Evaluation of culture requirements for cellulose production by Egyptian local isolate alongside reference strain Gluconacetobacter hansenii ATCC 23769. Pak J Biotechnol 16:69–80
Saleh AK, Soliman NA, Farrag AA, Ibrahim MM, El-Shinnawy NA, Abdel-Fattah YR (2020) Statistical optimization and characterization of a biocellulose produced by local Egyptian isolate Komagataeibacter hansenii AS.5. Int J Biol Macromol 144:198–207
Saleh AK, El-Gendi H, Soliman NA, El-Zawawy WK, Abdel-Fattah YR (2022) Bioprocess development for bacterial cellulose biosynthesis by novel Lactiplantibacillus plantarum isolate along with characterization and antimicrobial assessment of fabricated membrane. Sci Rep 12:1–17
Saska S, Barud H, Gaspar A, Marchetto R, Ribeiro SJL, Messaddeq Y (2011) Bacterial cellulose-hydroxyapatite nanocomposites for bone regeneration. Int J Biomater 2011:8
Schrecker S, Gostomski P (2005) Determining the water holding capacity of microbial cellulose. Biotechnol Lett 27:1435–1438
Segal L, Creely JJ, Martin A Jr, Conrad C (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794
Semjonovs P, Ruklisha M, Paegle L, Saka M, Treimane R, Skute M, Rozenberga L, Vikele L, Sabovics M, Cleenwerck I (2017) Cellulose synthesis by Komagataeibacter rhaeticus strain P 1463 isolated from Kombucha. Appl Microbiol Biotechnol 101:1003–1012
Shimomura K, Kamada H (1986) Roles of gelling agents in plant tissue culture. Plant Tissue Cult Lett 3:38–41
Sintharm P, Nimpaiboon A, Liao Y-C, Phisalaphong M (2022) Bacterial cellulose reinforced with skim/fresh natural rubber latex for improved mechanical, chemical and dielectric properties. Cellulose 29:1739–1758
Smith RH (2012) Plant tissue culture: techniques and experiments. Academic Press, London
Sun B, Zhang L, Wei F, Abdulrahman A-A, Xu X, Li W, Chen C, Lin J, Zhang H, Sun D (2020) In situ structural modification of bacterial cellulose by sodium fluoride. Carbohydr Polym 231:115765
Trovatti E, Oliveira L, Freire CS, Silvestre AJ, Neto CP, Pinto JJC, Gandini A (2010) Novel bacterial cellulose–acrylic resin nanocomposites. Compos Sci Technol 70:1148–1153
Tyagi N, Suresh S (2016) Production of cellulose from sugarcane molasses using Gluconacetobacter intermedius SNT-1: optimization & characterization. J Clean Prod 112:71–80
Ul-Islam M, Khan T, Park JK (2012) Water holding and release properties of bacterial cellulose obtained by in situ and ex situ modification. Carbohydr Polym 88:596–603
Wang J, Tavakoli J, Tang Y (2019) Bacterial cellulose production, properties and applications with different culture methods—a review. Carbohydr Polym 219:63–76
Watanabe K, Tabuchi M, Morinaga Y, Yoshinaga F (1998) Structural features and properties of bacterial cellulose produced in agitated culture. Cellulose 5:187–200
Zhang Y, Chen Y, Cao G, Ma X, Zhou J, Xu W (2020) Bacterial cellulose production from terylene ammonia hydrolysate by Taonella mepensis WT-6. Int J Biol Macromol 166:251–258
Zhijiang C, Guang Y (2011) Bacterial cellulose/collagen composite: characterization and first evaluation of cytocompatibility. J Appl Polym Sci 120:2938–2944
Funding
Open access funding provided by The Science, Technology & Innovation Funding Authority (STDF) in cooperation with The Egyptian Knowledge Bank (EKB). The authors have not disclosed any funding.
Author information
Authors and Affiliations
Contributions
GAGA: methodology, investigation, formal analysis, experimental details, and writing the original draft. AKS: methodology, investigation, formal analysis, and writing the original draft. THT: conceptualization, investigation, writing—review and editing. WKE: conceptualization, final review, and editing. YRA-F: final review and editing.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known conflict, competing interests, or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ammar, G.A.G., Saleh, A.K., Taha, T.H. et al. Developed applicability of a bacterial cellulose matrix as a gelling substitute for plant tissue culture media. Cellulose 29, 7883–7900 (2022). https://doi.org/10.1007/s10570-022-04757-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-022-04757-6