Skip to main content
SpringerLink
Log in

Physico-mechanical characterization of Higher Himalayan granite under the thermal treatments of different heating–cooling conditions

  • Research Paper
  • Published:
Acta Geotechnica Aims and scope Submit manuscript

Abstract

Although point load strength is considered as a best proxy for uniaxial compressive strength and also incorporated in the routinely used rock mass rating (RMR) system, the effects of temperature treatments on the point load strength has not gained ample attention over the years. Accordingly, in this investigation, two different cooling techniques (i.e. water- and air-cooling methods) has been used in order to study the influence of different heating–cooling treatments on the physical properties, microstructural characteristics and point load strength of Himalayan granite collected from Sangla valley, Himachal Pradesh. The temperatures for heat treatment were targeted at 100 °C, 200 °C, 300 °C, 400 °C, 500 °C and 600 °C. As a response to thermal treatments, increase in effective porosity, decrease in density and increase in damage coefficient occurs which causes exponential decrease in point load strength. It decreases as high as 74% and 81% under air-cooling and water cooling, respectively, after heating of about 600 °C with reference to thermally untreated specimens. The microstructural study reveals that the grain boundary is quite intact, and the thermal-induced cracks are less pronounced up to 200 °C in both the thermal treatments. However, the increase in crack density due to thermal stresses and thermal shocks induce additional micro-cracks like intra-, inter- and trans-granular cracks, at and beyond 300 °C onwards and their coalescence with each other at higher temperatures (i.e. ≥ 500 °C) under both the thermal treatments contribute towards the variation in point load strength of thermally treated granites.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

Data availability

All the relevant data are available in the manuscript.

References

  1. Barla G (2017) Comprehensive study including testing, monitoring and thermo-hydro modelling for design and implementation of a geothermal system in Torino (Italy). Geomech Geophy Geo-Ener Geo-Res 3:175–188. https://doi.org/10.1007/s40948-017-0050-x

    Article  Google Scholar 

  2. Basu A, Aydin A (2006) Predicting uniaxial compressive strength by point load test: significance of cone penetration. Rock Mech Rock Eng 39:483–490. https://doi.org/10.1007/s00603-006-0082-y

    Article  ADS  Google Scholar 

  3. Basu A, Mishra DA, Roychowdhury K (2013) Rock failure modes under uniaxial compression, Brazilian, and point load tests. Bull Eng Geol Environ 72:457–475. https://doi.org/10.1007/s10064-013-0505-4

    Article  Google Scholar 

  4. Basu A, Mishra DA (2014) A method for estimating crack-initiation stress of rock materials by porosity. J Geol Soc India 84:397–405. https://doi.org/10.1007/s12594-014-0145-8

    Article  Google Scholar 

  5. Bieniawski ZT (1989) Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering. Wiley

    Google Scholar 

  6. Breede K, Dzebisashvili K, Liu X, Falcone G (2013) A systematic review of enhanced (or engineered) geothermal systems: past, present and future. Geotherm Energy 1:1–27. https://doi.org/10.1186/2195-9706-1-4

    Article  Google Scholar 

  7. Brotóns V, Tomás R, Ivorra S, Alarcón JC (2013) Temperature influence on the physical and mechanical properties of a porous rock: San Julian’s calcarenite. Eng Geol 167:117–127. https://doi.org/10.1016/j.enggeo.2013.10.012

    Article  Google Scholar 

  8. Chaki S, Takarli M, Agbodjan WP (2008) Influence of thermal damage on physical properties of a granite rock: porosity, permeability and ultrasonic wave evolutions. Constr Build Mater 22:1456–1461. https://doi.org/10.1016/j.conbuildmat.2007.04.002

    Article  Google Scholar 

  9. Chandrasekharam D, Alam MA, Minissale A (2005) Thermal discharges at Manikaran, Himachal Pradesh, India. In Proc. World Geotherm Cong Antalya, Turkey

  10. Chen Y, Zhang C, Zhao Z, Zhao X (2020) Shear behavior of artificial and natural granite fractures after heating and water-cooling treatment. Rock Mech Rock Eng 53:5429–5449. https://doi.org/10.1007/s00603-020-02221-0

    Article  ADS  Google Scholar 

  11. Craig J, Absar A, Bhat G, Cadel G, Hafiz M, Hakhoo N, Kashkari R, Moore J, Ricchiuto TE, Thurow J, Thusu B (2013) Hot springs and the geothermal energy potential of Jammu & Kashmir State, NW Himalaya. India Earth-Sc Rev 126:156–177. https://doi.org/10.1016/j.earscirev.2013.05.004

    Article  ADS  CAS  Google Scholar 

  12. Fan L, Li H, Xi Y (2022) Evaluation of the effects of three different cooling methods on the dynamic mechanical properties of thermal-treated sandstone. Bul Eng Geol Environ 81:154. https://doi.org/10.1007/s10064-022-02630-1

    Article  Google Scholar 

  13. Gautam PK, Verma AK, Jha MK, Sharma P, Singh TN (2018) Effect of high temperature on physical and mechanical properties of Jalore granite. J App Geophy 159:460–474. https://doi.org/10.1016/j.jappgeo.2018.07.018

    Article  Google Scholar 

  14. Géraud Y (1994) Variations of connected porosity and inferred permeability in a thermally cracked granite. Geophy Res Let 21:979–982. https://doi.org/10.1029/94GL00642

    Article  ADS  Google Scholar 

  15. Hajpál M, Török Á (2004) Mineralogical and colour changes of quartz sandstones by heat. Environ Geol 46:311–322. https://doi.org/10.1007/s00254-004-1034-z

    Article  CAS  Google Scholar 

  16. Han X, He X, Cong B (2012) The simulation analysis of fire feature on underground substation. In: Jin D, Lin S (eds) Advances in future computer and control systems. Springer, Heidelberg

    Google Scholar 

  17. Hanano M (2004) Contribution of fractures to formation and production of geothermal resources. Renew Sust Energy Rev 8:223–236. https://doi.org/10.1016/j.rser.2003.10.007

    Article  Google Scholar 

  18. Hu Y, Hu Y, Zhao G, Jin P, Zhao Z, Li C (2022) Experimental investigation of the relationships among p-wave velocity, tensile strength, and mode-I fracture toughness of granite after high-temperature treatment. Nat Resou Res 31:801–816. https://doi.org/10.1007/s11053-022-10020-3

    Article  Google Scholar 

  19. Huang YH, Yang SQ, Bu YS (2020) Effect of thermal shock on the strength and fracture behavior of pre-flawed granite specimens under uniaxial compression. Theor Appl Fract Mech 106:102474. https://doi.org/10.1016/j.tafmec.2020.102474

    Article  Google Scholar 

  20. Hurlbut CS, Klein C (1977) Manual of mineralogy (after James D. Dana). Wiley, Hoboken

    Google Scholar 

  21. Isaka BLA, Gamage RP, Rathnaweera TD, Perera MSA, Chandrasekharam D, Kumari WGP (2019) An influence of thermally-induced micro-cracking under cooling treatments: mechanical characteristics of Australian granite. Energies 11:1338. https://doi.org/10.3390/en11061338

    Article  CAS  Google Scholar 

  22. ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission of testing methods, ISRM, compilation arranged by the ISRM Turkish national group. Kozan Offset, Ankara

    Google Scholar 

  23. ISRM (1979) Suggested methods for determining water content, porosity, density, absorption and related properties and swelling and slake-durability index properties. Int J Rock Mech Min Sci Geomech Abstr 16:141–156

    Google Scholar 

  24. Khan H, Sajid M (2023) Investigating the textural and physico-mechanical response of granites to heat treatment. Int J Rock Mech Min Sc 161:105281. https://doi.org/10.1016/j.ijrmms.2022.105281

    Article  Google Scholar 

  25. Krishnaswamy VS, Ravishanker R (1982) Scope of development, exploration and preliminary assessment of the geothermal resource potentials of India. Rec the Geol Sur India 111:17–38

    Google Scholar 

  26. Kumari WGP, Beaumont DM, Ranjith PG, Perera MSA, Isaka BA, Khandelwal M (2019) An experimental study on tensile characteristics of granite rocks exposed to different high-temperature treatments. Geomech Geophy Geo-Ener Geo-Res 5:47–64. https://doi.org/10.1007/s40948-018-0098-2

    Article  Google Scholar 

  27. Kumari WGP, Ranjith PG, Perera MSA, Chen BK (2018) Experimental investigation of quenching effect on mechanical, microstructural and flow characteristics of reservoir rocks: thermal stimulation method for geothermal energy extraction. J Petrol Sci Eng 162:419–433. https://doi.org/10.1016/j.petrol.2017.12.033

    Article  CAS  Google Scholar 

  28. Kumari WGP, Ranjith PG, Perera MSA, Chen BK, Abdulagatov IM (2017) Temperature-dependent mechanical behaviour of Australian Strathbogie granite with different cooling treatments. Eng Geol 229:31–44. https://doi.org/10.1016/j.enggeo.2017.09.012

    Article  Google Scholar 

  29. Li M, Mao X, Cao L, Pu H, Mao R, Lu A (2016) Effects of thermal treatment on the dynamic mechanical properties of coal measures sandstone. Rock Mech Rock Eng 49:3525–3539. https://doi.org/10.1007/s00603-016-0981-5

    Article  ADS  Google Scholar 

  30. Li Q, Yin T, Li X, Zhang S (2020) Effects of rapid cooling treatment on heated sandstone: a comparison between water and liquid nitrogen cooling. Bul Eng Geol Environ 79:313–327. https://doi.org/10.1007/s10064-019-01571-6

    Article  CAS  Google Scholar 

  31. Liu S, Xu J (2015) An experimental study on the physico-mechanical properties of two post-high-temperature rocks. Eng Geol 185:63–70. https://doi.org/10.1016/j.enggeo.2014.11.013

    Article  Google Scholar 

  32. Pathiranagei S, Gratchev I, Kong R (2021) Engineering properties of four different rocks after heat treatment. Geomech Geophy Geo-Energy Geo-Res 7:1–21. https://doi.org/10.1007/s40948-020-00211-8

    Article  Google Scholar 

  33. Paul S, Chattopadhyaya S, Raina AK, Sharma S, Li C, Zhang Y, Kumar A, Tag-Eldin E (2022) A review on the impact of high-temperature treatment on the physico-mechanical, dynamic, and thermal properties of granite. Sustainability 14:14839. https://doi.org/10.3390/su142214839

    Article  CAS  Google Scholar 

  34. Rathnaweera TD, Ranjith PG, Gu X, Perera MSA, Kumari WGP, Wanniarachchi WAM, Haque A, Li JC (2018) Experimental investigation of thermomechanical behaviour of clay-rich sandstone at extreme temperatures followed by cooling treatments. Int J Rock Mech Min Sci 107:208–223. https://doi.org/10.1016/j.ijrmms.2018.04.048

    Article  Google Scholar 

  35. Roddy DJ, Younger PL (2010) Underground coal gasification with CCS: a pathway to decarbonising industry. Energy Environ Sci 3:400–407. https://doi.org/10.1039/B921197G

    Article  CAS  Google Scholar 

  36. Rossi E, Kant MA, Madonna C, Saar MO, Rudolf von Rohr P (2018) The effects of high heating rate and high temperature on the rock strength: feasibility study of a thermally assisted drilling method. Rock Mech Rock Eng 51:2957–2964. https://doi.org/10.1007/s00603-018-1507-0

    Article  ADS  Google Scholar 

  37. Rybach L (2003) Geothermal energy: sustainability and the environment. Geotherm 32:463–470. https://doi.org/10.1016/S0375-6505(03)00057-9

    Article  ADS  Google Scholar 

  38. Shao S, Wasantha PLP, RanjithPG CBK (2014) Effect of cooling rate on the mechanical behaviour of heated Strathbogie granite with different grain sizes. Int J Rock Mech Min Sci 70:381–387. https://doi.org/10.1016/j.ijrmms.2014.04.003

    Article  Google Scholar 

  39. Shao Z, Wang Y, Tang X (2020) The influences of heating and uniaxial loading on granite subjected to liquid nitrogen cooling. Eng Geol 271:105614

    Article  Google Scholar 

  40. Shen Y, Hou X, Yuan J, Xu Z, Hao J, Gu L, Liu Z (2020) Thermal deterioration of high-temperature granite after cooling shock: multiple-identification and damage mechanism. Bull Eng Geol Environ 79:5385–5398. https://doi.org/10.1007/s10064-020-01888-7

    Article  Google Scholar 

  41. Singh B, Kumar S (2004) Geochemistry of biotite, muscovite and tourmaline from Early Palaeozoic granitoids of Kinnaur district, Higher Himachal Himalaya. Him J Sc 2:248–249. https://doi.org/10.3126/hjs.v2i4.930

    Article  Google Scholar 

  42. Singh B, Kumar S, Ban M, Nakashima K (2016) Mineralogy and geochemistry of granitoids from Kinnaur region, Himachal Higher Himalaya, India: implication on the nature of felsic magmatism in the collision tectonics. J Ear Sys Sc 125:1329–1352. https://doi.org/10.1007/s12040-016-0748-0

    Article  CAS  Google Scholar 

  43. Spearing DR, Farnan I, Stebbins JF (1992) Dynamics of the α-β phase transitions in quartz and cristobalite as observed by in-situ high temperature 29 Si and 17 O NMR. Phy Chem Min 19:307–321. https://doi.org/10.1007/BF00204008

    Article  ADS  CAS  Google Scholar 

  44. Srikantia SV, Bhargava ON (1998) Geology of Himachal Pradesh; Geol. Soc. India Memoir Bangalore, p 406

  45. Sun H, Sun Q, Deng W, Zhang W, Lü C (2017) Temperature effect on microstructure and P-wave propagation in Linyi sandstone. App Therm Eng 115:913–922. https://doi.org/10.1016/j.applthermaleng.2017.01.026

    Article  Google Scholar 

  46. Sundberg J, Back PE, Christiansson R, Hökmark H, Ländell M, Wrafter J (2009) Modelling of thermal rock mass properties at the potential sites of a Swedish nuclear waste repository. Int J Rock Mech Min Sci 46:1042–1054. https://doi.org/10.1016/j.ijrmms.2009.02.004

    Article  Google Scholar 

  47. Tian H, Kempka T, Xu NX, Ziegler M (2012) Physical properties of sandstones after high temperature treatment. Rock Mech Rock Eng 45:1113–1117. https://doi.org/10.1007/s00603-012-0228-z

    Article  ADS  Google Scholar 

  48. Tomás R, Cano M, Pulgarín LF, Brotóns V, Benavente D, Miranda T, Vasconcelos G (2021) Thermal effect of high temperatures on the physical and mechanical properties of a granite used in UNESCO World Heritage sites in north Portugal. J Build Eng 43:102823. https://doi.org/10.1016/j.jobe.2021.102823

    Article  Google Scholar 

  49. Török A, Török Á (2015) The effect of temperature on the strength of two different granites. Cent Eur Geol 58:356–369. https://doi.org/10.1007/s00603-018-1507-0

    Article  Google Scholar 

  50. Tuğrul A, Zarif IH (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Eng Geol 51:303–317. https://doi.org/10.1016/S0013-7952(98)00071-4

    Article  Google Scholar 

  51. Wang Z, He A, Shi G, Mei G (2018) Temperature effect on AE energy characteristics and damage mechanical behaviors of granite. Int J Geomec 18:04017163. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001094

    Article  Google Scholar 

  52. Wong LNY, Zhang Y, Wu Z (2020) Rock strengthening or weakening upon heating in the mild temperature range? Eng Geol 272:105619. https://doi.org/10.1016/j.enggeo.2020.105619

    Article  Google Scholar 

  53. Wu X, Guo Q, Zhu Y, Ren F, Zhang J, Wu X, Cai M (2021) Pore structure and crack characteristics in high-temperature granite under water-cooling. Case Studies in Thermal Eng 28:101646. https://doi.org/10.1016/j.csite.2021.101646

    Article  Google Scholar 

  54. Wu X, Huang Z, Song H, Zhang S, Cheng Z, Li R, Wen H, Huang P, Dai X (2019) Variations of physical and mechanical properties of heated granite after rapid cooling with liquid nitrogen. Rock Mech Rock Eng 52:2123–2139. https://doi.org/10.1007/s00603-018-1727-3

    Article  ADS  Google Scholar 

  55. Wu X, Huang Z, Zhang S, Cheng Z, Li R, Song H, Wen H, Huang P (2019) Damage analysis of high-temperature rocks subjected to LN2 thermal shock. Rock Mech Rock Eng 52:2585–2603. https://doi.org/10.1007/s00603-018-1711-y

    Article  ADS  Google Scholar 

  56. Wu X, Weng L, Zhao Y, Guo B, Luo T (2019) On the tensile mechanical characteristics of fine-grained granite after heating/cooling treatments with different cooling rates. Eng Geol 253:94–110. https://doi.org/10.1016/j.enggeo.2019.03.014

    Article  Google Scholar 

  57. Xi Y, Wang H, Li J, Dong W, Li H, Guo B (2022) Experimental comparison of mechanical properties and fractal characteristics of geothermal reservoir rocks after different cooling treatments. Energy Rep 8:5158–5176. https://doi.org/10.1016/j.egyr.2022.03.207

    Article  Google Scholar 

  58. Yang J, Fu LY, Zhang W, Wang Z (2019) Mechanical property and thermal damage factor of limestone at high temperature. Int J Rock Mech Min Sci 117:11–19. https://doi.org/10.1016/j.ijrmms.2019.03.012

    Article  Google Scholar 

  59. Yang T, Sun Q, Zhao F, Ge Z (2022) Mechanical behaviour and failure modes of high- temperature jointed granite based on DIC and AE technology. Geomech Geophys Geo-Energy Geo-Resour 8:86. https://doi.org/10.1007/s40948-022-00402-5

    Article  Google Scholar 

  60. Yin T, Li X, Cao W, Xia K (2015) Effects of thermal treatment on tensile strength of Laurentian granite using Brazilian test. Rock Mech Rock Eng 48:2213–2223. https://doi.org/10.1007/s00603-015-0712-3

    Article  ADS  Google Scholar 

  61. Yin T, Li X, Xia K, Huang S (2012) Effect of thermal treatment on the dynamic fracture toughness of Laurentian granite. Rock Mech Rock Eng 45:1087–1094. https://doi.org/10.1007/s00603-012-0240-3

    Article  ADS  Google Scholar 

  62. Zhang F, Zhang Y, Hu D, Shao J (2021) Modification of poroelastic properties in granite by heating–cooling treatment. Acta Geotech 16:2165–2173. https://doi.org/10.1007/s11440-021-01163-3

    Article  Google Scholar 

  63. Zhang F, Zhao J, Hu D, Skoczylas F, Shao J (2018) Laboratory investigation on physical and mechanical properties of granite after heating and water-cooling treatment. Rock Mech Rock Eng 51:677–694. https://doi.org/10.1007/s00603-017-1350-8

    Article  ADS  Google Scholar 

  64. Zhao F, Shi ZM, Sun Q (2021) Fracture mechanics behavior of jointed granite exposed to high temperatures. Rock Mech Rock Eng 54:2183–2196. https://doi.org/10.1007/s00603-021-02393-3

    Article  ADS  Google Scholar 

  65. Zhao F, Sun Q, Ge Z, Dang C (2023) Laboratory investigation on engineering mechanics properties of granite after various heating/cooling treatments. Environ Sc Pol Res 30:12532–12544. https://doi.org/10.1007/s11356-022-23038-0

    Article  Google Scholar 

  66. Zhao Z, Hu Y, Jin P, Xu Y, Hu Y, Li C, Meng Q (2021) Experimental study on the physico-mechanical properties and temperature field evolution of granite subjected to different heating–cooling treatments. Bull Eng Geol Environ 80:8745–8763. https://doi.org/10.1007/s10064-021-02466-1

    Article  Google Scholar 

  67. Zhao ZH, Liu ZN, Pu H, Li X (2018) Effect of thermal treatment on Brazilian tensile strength of granites with different grain size distributions. Rock Mech Rock Eng 51:1293–1303. https://doi.org/10.1007/s00603-018-1404-6

    Article  ADS  Google Scholar 

  68. Zhu Z, Kempka T, Ranjith PG, Tian H, Jiang G, Dou B, Mei G (2021) Changes in thermomechanical properties due to air and water cooling of hot dry granite rocks under unconfined compression. Renew Energy 170:562–573. https://doi.org/10.1016/j.renene.2021.02.019

    Article  Google Scholar 

Download references

Acknowledgements

We thank the Director, Wadia Institute of Himalayan Geology Dehradun for the overall support to carry out this work. The authors also thank Dr. Anindya Pain, Scientist CSIR-CBRI Roorkee for providing the instrumental facilities to perform the point load test and measure the ultrasonic velocities of the rock specimens. The authors want to thank the Handling Editor and all the Anonymous Reviewers for a constructive review that help enhance the quality and readability of the manuscript. BKR also thanks SERB for the NPDF research fellowship (PDF/2022/002111).

Author information

Authors and Affiliations

  1. Wadia Institute of Himalayan Geology, Dehradun, India

    Bikash Kumar Ram & Vikram Gupta

  2. Indian Institute of Petroleum and Energy, Visakhapatnam, India

    Bikash Kumar Ram

  3. Department of Geology, Sikkim University, Gangtok, India

    Vikram Gupta

Authors
  1. Bikash Kumar Ram
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Vikram Gupta
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Bikash Kumar Ram.

Ethics declarations

Conflict of interest

The authors declared that there is no known conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ram, B.K., Gupta, V. Physico-mechanical characterization of Higher Himalayan granite under the thermal treatments of different heating–cooling conditions. Acta Geotech. (2024). https://doi.org/10.1007/s11440-023-02224-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11440-023-02224-5

Keywords

Search

Navigation